Best executive courses in Industry and Manufacturing in United Arab Emirates

ICTD International Centre for Training and Development

Electrical Installations & Maintenance: Design, Inspection / Testing, Maintenance and Resilience

Electrical installations, whether for a small house or a large factory must meet certain basic criteria. It must convey electrical energy in an efficient manner from the point of origin (usually the load terminals of the Electricity Authority’s meters) to the locations, within the premises where...

ICTD International Centre for Training and Development

Earthing, Bonding, Lightning, Surge Protection-of Electrical & Electronic Systems and Equipment

Few topics generate as much controversy and argument as that of grounding and the associated topics of surge protection, shielding and lightning protection of electrical and electronic systems. Poor grounding practice can be the cause of continual and intermittent difficult-to-diagnose problems...

ICTD International Centre for Training and Development

Overhead Transmission Lines Problems and Maintenance

Transmission line towers constitute about 28 to 42 percent of the cost of the transmission line. The increasing demand for electrical energy can be met more economically by developing different light-weight configurations of transmission line towers. Foundation of any structure plays an...

ICTD International Centre for Training and Development

Introduction to the Safe Operation of High Power Systems

The purpose of this training course is to establish minimum standards to prevent hazardous electrical exposures to personnel and ensure compliance with regulatory requirements applicable to electrical systems. Working on the equipment in a de-energized state is required unless de-energizing...

ICTD International Centre for Training and Development

Electric Motor Maintenance & Troubleshooting

It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today (and this figure increases to 70% if you only consider industry.) The cost of maintaining electrical motors can be a significant amount in the budget...

ICTD International Centre for Training and Development

Operation Maintenance of Circuit Breakers, Switchgears & Capacitor Bank

The course details the actions required to commission LV switchgear to confirm that it works correctly and the specification has been met. The switchgear system can then be put into operation with confidence. The completion of commissioning should also trigger the start of a cycle of...

ICTD International Centre for Training and Development

Safe Maintenance of Electrical Plants and Equipment

ICTD International Centre for Training and Development

Safe Isolation of Plant and Equipment

Failures during the isolation and reinstatement of process plant are one of the main causes of loss-of-containment incidents, and may lead to major accidents. High standards of isolation and rigorous management control are required for plant isolation and reinstatement, particularly in major...

ICTD International Centre for Training and Development

Turnaround, Shutdown and Outage Management: Effective Planning and Step-by-step Execution of Planned Maintenance Operations

Shutdown management is project management of a special kind which includes managing the repair, replacement or maintenance of critical systems. Manufacturing and process plants, computer systems, airliners, and many other systems must be regularly closed down or taken out of service for planned...

ICTD International Centre for Training and Development

Fault Diagnosis and Failure Prevention

This course presents a systematic approach to fault diagnosis and failure prevention in machinery used in process, manufacturing, power generation and mining industries. Preventive maintenance is taught through theory and examples in metallurgical failure analysis, vibration analysis, machinery...