Compare courses
Register
ICTD International Centre for Training and Development

Pumps, Mechanical Inspection & Troubleshooting

This course has no confirmed dates in the future. Subscribe to be notified when it is offered.

Relevant courses

Course format
Starting after
Ending before

Disclaimer

Coursalytics is an independent platform to find, compare, and book executive courses. Coursalytics is not endorsed by, sponsored by, or otherwise affiliated with ICTD International Centre for Training and Development.

Full disclaimer.

Description

This course provides a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps. This includes piston pumps, plunger pumps, rotary pumps, screw pumps, two- and three-lobe pumps, cam pumps, vane pumps, bellows-type metering pumps, diaphragm pumps, canned motor pumps, and centrifugal pumps. The characteristics, selection criteria, sizing calculations, sealing arrangements, common problems, repair techniques, as well as the preventive and predictive maintenance of these pumps are covered in detail.

This program is a MUST for those who use this equipment. It covers how pumps operate and provides the guidelines and rules that must be followed for their successful application. This program provides the following for all types of pumps and bearings:

  • Basic Design
  • Specification
  • Selection Criteria
  • Sizing Calculations
  • Sealing Arrangements
  • Common Operational Problems
  • All Diagnostics, Troubleshooting, and Maintenance Required for this Equipment
  • Pump Drivers

Course Objectives

Upon successful completion of this course, the delegates will be able to:

  • Maximize the efficiency, reliability, and longevity of all types of pumps
  • Size and select out of the various types of dynamic and positive displacement pumps using the performance characteristics and the selection criteria that you learn in this program
  • Carry out diagnostic testing and inspection of critical components with the knowledge of common failure modes of pumps by applying advanced fault detection techniques.
  • Select bearings and lubrication, pump sealing arrangements, meet commissioning requirements, troubleshoot, provide predictive and preventive maintenance, enhance reliability, and reduce cost.
  • Determine the maintenance required to minimize pump downtime and operating cost and maximize its efficiency, reliability, and useful life.
  • Gain a thorough understanding of pump characteristics.
  • Understand all the causes of failures in pumps.
  • Determine all the design features that improve the efficiency and reliability of all pumps.
  • Design different types of pumping systems.
  • Gain a thorough understanding of the various types of sealing arrangements used in compressors.

This program provides in-depth understanding of the operation, selection, sizing, applications, sealing arrangements, troubleshooting, and maintenance of all types of pumps. All the methods used to enhance the performance; reliability, troubleshooting, and maintenance of this equipment are discussed in detail. This program includes also detailed coverage of mechanical seals, and pump drivers.

Course Outline

Day 1

Pump Categories, Centrifugal Pumps, and Mechanical Seals

  • Pump Categories: Dynamic (Centrifugal) and Positive Displacement (Reciprocating and Rotary)
  • Centrifugal Pumps: Operation, Casings and Diffusers, Hydrostatic Pressure Tests, Impellers, Hydraulic Balancing Devices, Mechanical Seals, Minimum Flow Requirement, Performance
  • Characteristics, Cavitation, and Net positive Suction Head

Day 2

Pump Categories, Centrifugal Pumps, and Mechanical Seals (cont’d)

  • Centrifugal Pump Mechanical Seals, Components, Temperature Control, Seal Lubrication/Leakage, Applications, Types of Mechanical Seals, Common Failure Modes of Seals, Seal Refurbishment
  • Maintenance Recommended for Centrifugal Pumps
  • Vibration Analysis and Predictive Maintenance

Day 3

Positive Displacement Pumps, Troubleshooting, Maintenance, and Selection of Pumps

  • Reciprocating Pumps, Piston Pumps, Plunger Pumps, Rotary Pumps, Screw Pumps, Two- and Three-Lobe Pumps
  • Cam Pumps, Vane Pumps, Bellows-Type Metering Pumps
  • Diaphragm Pumps
  • Canned Motor Pumps, Seal-less Pump Motors
  • Pump Maintenance, Inspection, Overhaul, Diagnoses of Pump Troubles
  • Troubleshooting of Centrifugal Pumps

Day 4

Positive Displacement Pumps, Troubleshooting, Maintenance, and Selection of Pumps

(cont’d)

  • Troubleshooting of Rotary Pumps
  • Troubleshooting of Reciprocating Pumps
  • Water Hammer
  • Smart Instrumentation
  • Pump Selection

Day 5

Positive Displacement Pumps, Troubleshooting, Maintenance, and Selection of Pumps

(cont’d)

  • Pumping System Calculations
  • Workshop: Design and selection of Different Pumping Systems for the Oil and Gas Industry, and the Power Generation Industry
  • Vibration Analysis and Predictive Maintenance
  • Diagnostics of Pumping Systems
  • Pump Drivers

## Course Methodology

A variety of methodologies will be used during the course that includes:

  • (30%) Based on Case Studies
  • (30%) Techniques
  • (30%) Role Play
  • (10%) Concepts
  • Pre-test and Post-test
  • Variety of Learning Methods
  • Lectures
  • Case Studies and Self Questionaires
  • Group Work
  • Discussion
  • Presentation

Who should attend

This course is intended for engineers of all disciplines, managers, maintenance personnel, technicians and other technical individuals.

Files

Detailed Description
Detailed Description
Show more