Compare courses
Register
ICTD International Centre for Training and Development

Heat Exchanger Design, Operation, Performance, Inspection, Maintenance & Repair

Sep 8—12, 2019
5 days
Dubai, United Arab Emirates
USD 3300
USD 660 per day
Nov 24—28, 2019
5 days
Abu Dhabi, United Arab Emirates
USD 3300
USD 660 per day
Dec 8—12, 2019
5 days
Abu Dhabi, United Arab Emirates
USD 3300
USD 660 per day

How it works

Disclaimer

Coursalytics is an independent platform to find, compare, and book executive courses. Coursalytics is not endorsed by, sponsored by, or otherwise affiliated with ICTD International Centre for Training and Development.

Full disclaimer.

Description

The course concentrates on heat exchanger hardware, performance requirements, inspection, maintenance and repair, and life extension. The material applies to tubular exchangers used in chemical and petrochemical plants, oil refineries, power stations and industrial facilities. Thermal design is not discussed except where it affects the structure. The TEMA system which is, internationally used explained for describing size and type. TEMA nomenclature and terminology are illustrated. The ASME code and TEMA standards are observed. Design point setting which affects the structure of the operating deviations, transients and upsets are examined. An overview of tube vibration includes descriptions and illustrations of damage caused by tube vibration, vibration forcing mechanisms and information required for vibration analysis.

Course Objectives

Upon successful completion of this course, the delegates will be able to:

  • Gain understanding of the nomenclature and terminology used for shell and tube heat exchangers,
  • Determine how the tube side and shell side of tubular heat exchangers are constructed, Determine how heat exchangers are structured and assembled, manufactured, preparation for installation and joined to tube sheets
  • Learn how to write and interpret specifications, some of the exchanger codes and standards, inspections, maintenance, repair and inspection techniques and determination of failure causes

## Course Outline

Day 1

Types and Applications of Heat Exchangers

  • Overview and Basic Fundamentals
  • Heat Transfer Fundamentals and Heat Transfer Coefficients
  • Heat Exchanger Types and Application
  • Geometry Of Shell & Tube Heat Exchangers (STHE)
  • Double Pipes TEMA Nomenclature, Front End Head Types, Shell Types
  • Rear End Types, Double Pipe Units, Selection Guidelines

Day 2

Thermal and Hydraulic Design of Heat Exchangers

  • Sizing and Specifying the Heat Exchanger
  • Flow vs. Temperature Difference in STHE
  • Temperature Difference in STHE
  • Condensers and Reboilers

Day 3

Mechanical Design of Heat Exchangers

  • Mechanical Design Of Heat Exchangers
  • Basic Design Of Heat Exchangers
  • Special Design Considerations
  • Piping Loads on Exchanger Nozzles
  • Materials of Construction On Heat Exchangers
  • Fabrication of Heat Exchangers

Day 4

Operation and Maintenance of Heat Exchangers

  • Fouling in Heat Exchangers
  • Corrosion and Erosion in Heat Exchangers
  • Heat Exchanger Inspection Methods
  • Operation and Troubleshooting
  • Performance Monitoring and Testing
  • Cost-Effective Maintenance and Repair of Heat Exchangers

Day 5

Performance Enhancement and Optimization of Heat Exchangers

  • Heat Transfer Augmentation Techniques
  • Finned Tubes
  • Heat Integration Basics
  • Pinch Technology
  • Heat Exchanger Train Optimization
  • Tube Bundle Replacement - Alternative Enhanced Tube Bundle Designs

## Course Methodology

A variety of methodologies will be used during the course that includes:

  • (30%) Based on Case Studies
  • (30%) Techniques
  • (30%) Role Play
  • (10%) Concepts
  • Pre-test and Post-test
  • Variety of Learning Methods
  • Lectures
  • Case Studies and Self Questionaires
  • Group Work
  • Discussion
  • Presentation

Who should attend

The course is aimed at personnel, who are involved with procurement, construction, installation, inspection and troubleshooting, also with maintenance, repair, mechanics, operation and life expectancy of shell and tube heat exchangers. The program will also be of special value to individuals who specify or buy heat exchangers or who are in charge of evaluating the condition of existing equipment.

Files

Detailed Description
Detailed Description

Next dates

Sep 8—12, 2019
5 days
Dubai, United Arab Emirates
USD 3300
USD 660 per day
Nov 24—28, 2019
5 days
Abu Dhabi, United Arab Emirates
USD 3300
USD 660 per day
Dec 8—12, 2019
5 days
Abu Dhabi, United Arab Emirates
USD 3300
USD 660 per day

How it works

Show more