Mark Hughes

Peer-reviewed scientific articles

Journal article-refereed, Original research

Sensory and emotional perception of wooden surfaces through fingertip touch

Bhatta, Shiv R.; Tiippana, Kaisa; Vahtikari, Katja; Hughes, Mark; Kyttä, Marketta

2017 in FRONTIERS IN PSYCHOLOGY (Frontiers Research Foundation)

ISSN: 1664-1078

The influence of extractives on the sorption characteristics of Scots pine (Pinus sylvestris L.)

Vahtikari, Katja; Rautkari, Lauri; Noponen, Tuula; Lillqvist (née Laine), Kristiina; Hughes, Mark

2017 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Surface modification of birch veneer by peroxide bleaching

Yamamoto, Akio; Rohumaa, Anti; Hughes, Mark; Vuorinen, Tapani; Rautkari, Lauri

2017 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

The effect of hydration on the micromechanics of regenerated cellulose fibres from ionic liquid solutions of varying draw ratios

Bulota, M.; Michud, A.; Hummel, M.; Hughes, M.; Sixta, H.

2016 in CARBOHYDRATE POLYMERS (ELSEVIER SCI LTD)

ISSN: 0144-8617

Building material naturalness: Perceptions from Finland, Norway and Slovenia

Burnard, Michael D; Nyrud, Anders Q; Bysheim, Kristian; Kutnar, Andreja; Vahtikari, Katja; Hughes, Mark

2016 in INDOOR AND BUILT ENVIRONMENT (SAGE Publications Ltd)

ISSN: 1420-326X

Assessing the susceptibility of hemp fibre to the formation of dislocations during processing

Hernandez-Estrada, Albert; Gusovius, Hans-Jörg; Müssig, Jörg; Hughes, Mark

2016 in INDUSTRIAL CROPS AND PRODUCTS (Elsevier)

ISSN: 0926-6690

Influence of temperature of thermal treatment on surface densification of spruce

Kariz, Mirko; Kuzman, Manja Kitek; Sernek, Milan; Hughes, Mark; Rautkari, Lauri; Kamke, Frederick A.; Kutnar, Andreja

2016 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Wood densification and thermal modification hardness, set-recovery and micromorphology

Laine, Kristiina; Segerholm, Kristoffer; Wålinder, Magnus; Rautkari, Lauri; Hughes, Mark

2016 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Surface densification of acetylated wood

Laine, Kristiina; Segerholm, Kristoffer; Wålinder, Magnus; Rautkari, Lauri; Hughes, Mark; Lankveld, Chiel

2016 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer

Rohumaa, Anti; Antikainen, Toni; Hunt, Christopher G.; Frihart, Charles R.; Hughes, Mark

2016 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Effect of log soaking and the temperature of peeling on the properties of Rotary-cut birch (Betula pendula Roth) veneer bonded with phenol-formaldehyde adhesive

Rohumaa, Anti; Yamamoto, Akio; Hunt, Christopher G.; Frihart, Charles R.; Hughes, Mark; Kers, Jaan

2016 in Bioresources (NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI)

ISSN: 1930-2126

The potential for cascading wood from demolished buildings the condition of recovered wood through a case study in Finland

Sakaguchi, D.; Takano, A.; Hughes, M.

2016 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)

ISSN: 2042-6445

The effect of temperature and moisture content on the fracture behaviour of spruce and birch

Tukiainen, Pekka; Hughes, Mark

2016 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

The effect of elevated temperature and high moisture content on the fracture behaviour of thermally modified spruce

Tukiainen, Pekka; Hughes, Mark

2016 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

The cellular level mode i fracture behaviour of spruce and birch in the RT crack propagation system

Tukiainen, Pekka; Hughes, Mark

2016 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence

Antikainen, Toni; Rohumaa, Anti; Hunt, Christopher G.; Levirinne, Mari; Hughes, Mark

2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Comparison of the accuracy of two on-line industrial veneer moisture content and density measurement systems

Antikainen, Toni; Rohumaa, Anti; Hughes, Mark; Kairi, Matti

2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging

Antikainen, Toni; Eskelinen, Joona; Rohumaa, Anti; Vainio, Teemu; Hughes, Mark

2015 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Estimating birch veneer (Betula pendula Roth) moisture content using infrared technology

Antikainen, Toni; Rohumaa, Anti; Bulota, Mindaugas; Kotilahti, Timo; Hughes, Mark

2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Cross-linking of cellulose and poly(ethylene glycol) with citric acid

de Cuadro, Pamela; Belt, Tiina; Kontturi, Katri S.; Reza, Mehedi; Kontturi, Eero; Vuorinen, Tapani; Hughes, Mark

2015 in REACTIVE AND FUNCTIONAL POLYMERS (Elsevier)

ISSN: 1381-5148

The toughness of hygrothermally modified wood: COST Action FP0904 2010-2014: Thermo-hydro-mechanical wood behavior and processing

Hughes, Mark; Hill, Callum; Pfriem, Alexander

2015 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Toward energy efficiency through an optimized use of wood: The development of natural hydrophobic coatings that retain moisture-buffering ability

Lozhechnikova, Alina; Vahtikari, Katja; Hughes, Mark; Österberg, Monika

2015 in Energy and Buildings (Elsevier Science)

ISSN: 0378-7788

The effect of material selection on life cycle energy balance: A case study on a hypothetical building model in Finland

Takano, Atsushi; Pal, Sudip Kumar; Kuittinen, Matti; Alanne, Kari; Hughes, Mark; Winter, Stefan

2015 in BUILDING AND ENVIRONMENT (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 0360-1323

Life cycle assessment of wood construction according to the normative standards

Takano, Atsushi; Hafner, Annette; Linkosalmi, Lauri; Ott, Stephan; Hughes, Mark; Winter, Stefan

2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

The Effect of Hydrothermal Treatment on Color Stability and Chemical Properties of Birch Veneer Surfaces

Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani

2015 in Bioresources (NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI)

The chemical characteristics of squeezable sap from silver birch (Betula pendula) logs hydrothermally treated at 70 °C: the effect of treatment time on the concentration of water extracts

Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani

2015 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Chemical characteristics of squeezable sap of hydrothermally treated silver birch logs (Betula pendula): effect of treatment time and the quality of the soaking water in pilot scale experiment

Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani

2015 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile

Antikainen, Toni; Paajanen, Olli; Rautkari, Lauri; Kutnar, Andreja; Kamke, Frederick A.; Hughes, Mark

2014 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Experimental validation of green wood peeling assisted by IR heating - some considerations of the analytical system design

Dupleix, Anna; Batsale, Jean-Christophe; Kusiak, Andrzej; Hughes, Mark; Denaud, Louis Etienne

2014 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Micromorphological studies of surface densified wood

Laine, Kristiina; Segerholm, Kristoffer; Wålinder, Magnus; Rautkari, Lauri; Ormondroyd, Graham; Hughes, Mark; Jones, Dennis

2014 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C

Rautkari, Lauri; Honkanen, Juhani; Hill, Callum A.S.; Ridley-Ellis, Daniel; Hughes, Mark

2014 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

The influence of felling season and log-soaking temperature on the wetting and phenol formaldehyde adhesive bonding characteristics of birch veneer

Rohumaa, Anti; Hunt, Christopher G.; Frihart, Charles R.; Saranpää, Pekka; Ohlmeyer, Martin; Hughes, Mark

2014 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Factors influencing properties of parallel laminated binderless bonded plywood manufactured from rotary cut birch (Betula pendula L.).

Ruponen, Jussi; Rautkari, Lauri; Belt, Tiina; Hughes, Mark

2014 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)

ISSN: 2042-6445

Spruce fiber properties after high-temperature thermomechanical pulping (HT-TMP)

Solala, Iina; Antikainen, Toni; Reza, Mehedi; Johansson, Leena-Sisko; Hughes, Mark; Vuorinen, Tapani

2014 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

A multidisciplinary approach to sustainable building material selection A case study in a Finnish context

Takano, Atsushi; Hughes, Mark; Winter, Stefan

2014 in BUILDING AND ENVIRONMENT (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 0360-1323

Greenhouse gas emission from construction stage of wooden buildings

Takano, Atsushi; Pittau, Francesco; Hafner, Annette; Ott, Stephan; Hughes, Mark; De Angelis, Enrico

2014 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)

ISSN: 2042-6445

Comparison of life cycle assessment databases: A case study on building assessment

Takano, Atsushi; Winter, Stefan; Hughes, Mark; Linkosalmi, Lauri

2014 in BUILDING AND ENVIRONMENT (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 0360-1323

Soy protein-nanocellulose composite aerogels

Arboleda, Julio C.; Hughes, Mark; Lucia, Lucian A.; Laine, Janne; Ekman, Kalle; Rojas, Orlando J.

2013 in CELLULOSE (SPRINGER)

ISSN: 0969-0239

Mechanical behavior, structure, and reinforcement processes of TEMPO-oxidized cellulose reinforced poly(lactic) acid

Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppälä, Jukka

2013 in POLYMER COMPOSITES (WILEY-BLACKWELL)

ISSN: 0272-8397

Mid-infrared absorption properties of green wood

Dupleix, Anna; Meneses, Domingos De Sousa; Hughes, Mark; Marchal, Rémy

2013 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies

Dupleix, Anna; Denaud, Louis-Etienne; Bleron, Laurent; Marchal, Rémy; Hughes, Mark

2013 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments

Dupleix, Anna; Ahmedou, Sid Ahmed Ould; Bleron, Laurent; Rossi, Frédéric; Hughes, Mark

2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Measuring the thermal properties of green wood by the transient plane source (TPS) technique

Dupleix, Anna; Kusiak, Andrzej; Hughes, Mark; Rossi, Fréderic

2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Water vapour sorption behaviour of thermally modified wood

Hill, C.A.S.; Ramsay, J.; Laine, K.; Rautkari, Lauri; Hughes, Mark

2013 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)

ISSN: 2042-6445

Experiments on the effective compliance in the radial-tangential plane of Norway spruce

Karakoc, Alp; Tukiainen, Pekka; Freund, Jouni; Hughes, Mark

2013 in COMPOSITE STRUCTURES (Elsevier BV)

ISSN: 0263-8223

Measuring thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood

Laine, Kristiina; Belt, Tiina; Rautkari, Lauri; Ramsay, James; Hill, Callum AS.; Hughes, Mark

2013 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Analysing the density profile characteristics of surface densified solid wood using a computational approach

Laine, Kristiina; Antikainen, Toni; Rautkari, Lauri; Hughes, Mark

2013 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)

ISSN: 2042-6445

The effect of process parameters on the hardness of surface densified Scots pine solid wood

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark

2013 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Kutnar, Andreja

2013 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification

Rautkari, Lauri; Laine, Kristiina; Kutnar, Andreja; Medved, Sergej; Hughes, Mark

2013 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde bonded birch plywood

Rohumaa, Anti; Hunt, Christopher G.; Hughes, Mark; Frihart, Charles R.; Logren, Janne

2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

The fracture behavior of birch and spruce in the radial-tangential crack propagation direction at the scale of the growth ring

Tukiainen, Pekka; Hughes, Mark

2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Colorimetric Behavior and Seasonal Characteristic of Xylem Sap Obtained by Mechanical Compression from Silver Birch (Betula pendula)

Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpää, Pekka; Andberg, Martina; Vuorinen, Tapani

2013 in ACS SUSTAINABLE CHEMISTRY AND ENGINEERING (AMER CHEMICAL SOC)

Micromechanics of TEMPO-oxidized fibrillated Cellulose Composites

Bulota, Mindaugas; Tanpichai, Supachok; Hughes, Mark; Eichhorn, Stephen J.

2012 in ACS APPLIED MATERIALS AND INTERFACES (AMER CHEMICAL SOC)

ISSN: 1944-8244

Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose

Bulota, Mindaugas; Hughes, Mark

2012 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid)

Bulota, Mindaugas; Kreitsmann, Kätlin; Hughes, Mark; Paltakari, Jouni

2012 in JOURNAL OF APPLIED POLYMER SCIENCE (Wiley-Blackwell)

ISSN: 0021-8995

Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy

Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz

2012 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

The water vapour sorption properties of thermally modified and densified wood

Hill, Callum A. S.; Ramsay, James; Keating, Barbra; Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Constant, Bastien

2012 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Ultrastructural evaluation of compression wood-like properties of common juniper (Juniperus communis L)

Hänninen, Tuomas; Tukiainen, Pekka; Svedström, Kirsi; Serimaa, Ritva; Saranpää, Pekka; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani

2012 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure

Hänninen, Tuomas; Thygesen, Anders; Mehmood, Shahid; Madsen, Bo; Hughes, Mark

2012 in INDUSTRIAL CROPS AND PRODUCTS (Elsevier)

ISSN: 0926-6690

XPS and the medium-dependent surface adaptation of cellulose in wood.

Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Tuomas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne

2012 in SURFACE AND INTERFACE ANALYSIS (John Wiley and Sons Ltd)

ISSN: 0142-2421

Thermodynamic characteristics of surface densified solid Scots pine wood

Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark

2012 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

The Fracture Toughness and Properties of Thermally Modified Beech and Ash at Different Moisture Contents

Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose L.

2012 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

A study by X-ray photoelectron spectroscopy (XPS) of the chemistry of the surface of Scots pine (Pinus sylvestris L.) modified by friction

Rautkari, Lauri; Hänninen, Tuomas; Johansson, Leena-Sisko; Hughes, Mark

2012 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)

ISSN: 0018-3830

Properties of biocomposites: influence of preparation method, testing environment and a comparison with theoretical models

Bulota, M.; Jääskeläinen, A. S.; Paltakari, J.; Hughes, M.

2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Kink bands in bast fibres and their effects on mechanical properties

Hänninen, T.; Michud, A.; Hughes, M.

2011 in PLASTICS RUBBER AND COMPOSITES (Maney Publishing)

ISSN: 1465-8011

Surface modification of Scots pine: the effect of process parameters on the through thickness density profile

Rautkari, Lauri; Laine, Kristiina; Laflin, Nick; Hughes, Mark

2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Potential error in density profile measurements for wood composites

Rautkari, Lauri; Kamke, Frederick A.; Hughes, Mark

2011 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)

ISSN: 0018-3768

Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite

Rautkari, Lauri; Kamke, Frederick A.; Hughes, Mark

2011 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

The Combined Effects of Boron and oil Heat treatment on Beech and Scots Pine Wood Properties. Part 1: Boron Leaching, Thermogravimetric Analysis and Chemical Composition

Tomak, Eylem Dizman; Hughes, Mark; Yildiz, Umit C.; Viitanen, Hannu

2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

The combined effects of boron and oil heat treatment on the properties of beech and Scots pine wood. Part 2: Water absorption, compression strength, color changes, and decay resistance

Tomak, Eylem Dizman; Viitanen, Hannu; Yildiz, Umit C.; Hughes, Mark

2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Dimensional stability, UV resistance, and static mechanical properties of Scots pine chemically modified with alkylene expoxides

Pandey, Krishna K.; Hughes, Mark; Vuorinen, Tapani

2010 in Bioresources (NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI)

Properties and set-recovery of surface densified Norway spruce and European beech

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark

2010 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

Surface modification of wood using friction

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark

2009 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)

ISSN: 0043-7719

The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites

Liu, Q.; Hughes, M.

2008 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)

ISSN: 1359-835X

Deformation and Fracture Behaviour of Flax Fibre Reinforced Thermosetting Polymer Matrix Composites

Hughes, Mark; Carpenter, James; Hill, Callum

2007 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

Structural Biocomposites from Flax Part II: The use of PEG and PVA as interfacial compatibilising agents

Liu, Q.; Stuart, T.; Hughes, M.; Sharma, H.S.S.; Lyons, G.

2007 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)

Relationship Between Sensory Quality and Volatile Compounds of Elderflower (Sambucus nigra L) Extracts

Kaack, K.; Christensen, L.P.; Hughes, M.; Eder, R.

2006 in EUROPEAN FOOD RESEARCH AND TECHNOLOGY (Springer Verlag)

Determining the physical properties of flax fibre for industrial applications: the influence of agronomic practice

Norton, A.J.; Bennett, S.J.; Hughes, Mark; Dimmock, J.P.R.E.; Wright, D.; Newman, G.; Harris, I.M.; Edwards-Jones, G.

2006 in ANNALS OF APPLIED BIOLOGY (Wiley-Blackwell)

ISSN: 0003-4746

Structural Biocomposites from Flax Part I: Effect of Bio-technical Fibre Modification on Composite Properties

Stuart, T.; Liu, Q.; Hughes, M.; McCall, R.D.; Sharma, H.S.S.; Norton, A.

2006 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)

The Relationship Between Sensory Quality and Volatile Compounds in Raw Juice Processed from Elderberries (Sambucus nigra L.)

Kaack, K.; Christensen, L.P.; Hughes, M.; Eder, R.

2005 in EUROPEAN FOOD RESEARCH AND TECHNOLOGY (Springer Verlag)

The fracture toughness of bast fibre reinforced polyester composites Part 1 Evaluation and analysis

Hughes, M.; Hill, C. A. S.; Hague, J. R. B.

2002 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Strain induced shifts in the Raman spectra of natural cellulose fibers

Eichhorn, S. J.; Hughes, M.; Snell, R.; Mott, L.

2000 in Journal of Materials Science Letters (Chapman & Hall)

ISSN: 0261-8028

An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity

Hughes, Mark; Sèbe, Gilles; Hague, Jamie; Hill, Callum; Spear, Morwenna; Mott, Laurence

2000 in COMPOSITE INTERFACES (Taylor and Francis Ltd.)

ISSN: 0927-6440

RTM hemp fibre-reinforced polyester composites

Sèbe, Gilles; Cetin, Nihat S.; Hill, Callum A.S.; Hughes, Mark

2000 in APPLIED COMPOSITE MATERIALS (Springer Netherlands)

ISSN: 0929-189X

Review article, Literature review, Systematic review

Defects in natural fibres: their origin, characteristics and implications for natural fibre reinforced composites

Hughes, Mark

2012 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Natural Fibre Reinforced Composites Opportunities and Challenges

Hill, Callum; Hughes, Mark

2010 in JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (American Scientific Publishers)

ISSN: 1556-6560

Biocomposites Technology, Environmental Credentials and Market Forces

Fowler, Paul A.; Hughes, J. Mark; Elias, Robert M.

2006 in JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (John Wiley and Sons Ltd)

ISSN: 0022-5142

Review: Current international research into cellulosic fibres and composites

Eichhorn, S. J.; Baillie, C. A.; Zafeiropoulos, N.; Mwaikambo, L. Y.; Ansell, M. P.; Dufresne, A.; Entwistle, K. M.; Herrera-Franco, P. J.; Escamilla, G. C.; Groom, L.; Hughes, M.; Hill, C.; Rials, T. G.; Wild, P. M.

2001 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)

ISSN: 0022-2461

Book section, Chapters in research books

Plywood and other veneer-based products

Hughes, Mark; Ansell, M.P.

2015 in Woodhead Publishing Series in Composites Science and Engineering (Woodhead Publishing)

ISBN: 978-1-78242-454-3

Influence of surface densification of wood on its dynamic wettability and surface energy

Petric, Marko; Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark

2013

ISBN: 9781118472927

Applications

Hughes, M.

2004

Quantifying the Range of Properties in Natural Raw Material Origin Polymers and Fibres

Hughes, M.

2004

Conference proceedings

Lathe check formation and their impact on evaluations of veneer-based panel bond quality

Rohumaa, Anti; Hunt, Christopher G.; Hughes, Mark; Frihart, Charles R.; Kers, Jaan

2016

ISBN: 9783903039001

The effect of wood anatomy and coatings on the moisture buffering performance of wooden surfaces

Vahtikari, Katja; Noponen, Tuula; Hughes, Mark

2016

ISBN: 9783903039001

SELF-BONDED BIRCH PLYWOOD (BETULA PENDULA, L.): STUDIES ON INTERNAL GAS PRESSURE DURING HOT PRESSING AND ON POST-MANUFACTURE THERMAL MODIFICATION

Ruponen, Jussi; Rautkari, Lauri; Ohlmeyer, Martin; Hughes, Mark

2015

ISBN: 978-80-7509-255-7

Properties of high-temperature thermomechanical pulp (HT-TMP)

Solala, L.; Antikainen, T.; Reza, M.; Hughes, M.; Vuorinen, T.

2014

Comparision of life cycle assessment databases for building assessment

Takano, Atsushi; Winter, Stefan; Hughes, Mark

2014

The untapped potential of wood in developing energy-efficient spaces

Vahtikari, Katja; Cronhjort, Yrsa; Hughes, Mark; Linkosalmi, Lauri

2014

Physical and mechanical properties of TEMPO-oxidized cellulose reinforced composites

Bulota, Mindaugas; Hänninen, Tuomas; Hughes, Mark

2010

MICRO-STRESS STATISTICS OF HONEYCOMB MATERIAL

Freund, Jouni; Tuhkuri, Jukka; Hughes, Mark

2010

Origin of kink bands in bast fibres and their effects on the fibre strength

Hänninen, Tuomas; Alam, Md.; Michud, Anne; Hughes, Mark

2010

A Fracture Mechanics Study of Thermally Modified Beech for Structural Applications

Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose L.

2010

Wood surface densification using different methods

Rautkari, Lauri; Kutnar, Andreja; Hughes, Mark; Kamke, Frederick

2010

Properties and chemical changes of surface densified wood

Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric

2010

Fracture of Spruce and Birch in the Rt Crack Propagation Direction Based on Digital Image Correlation Analysis of Esem Images

Tukiainen, Pekka; Hughes, Mark

2010

Evaluation of Parameters Influencing the VOC Emissions from Plywood

Ohlmeyer, Martin; Rohumaa, Anti; Antikainen, Toni; Hughes, Mark

2009

Sustainable Composites from Wood Nature’s Biodegradable Polymer: Opportunities and Challenges

Hughes, Mark

2008

An innovative thermo densification method for wooden surfaces

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark

2008

Factors Influencing the Properties of Veneer-Based Products

Rohumaa, Anti; Hughes, Mark; Ohlmeyer, Martin

2008

Fracture of spruce and birch in the RT crack propagation direction

Tukiainen, Pekka; Hughes, Mark

2008

Challenges in surface measurement: a comparison of simulated and real surface topography measurements in birch veneer

Honkanen, J.; Hughes, M.

2007

Challenges in the Online Characterization of the Veneer Surface Topography

Honkanen, J.; Hughes, M.

2007

Challenges in the characterization of the wood surface: A simulation approach.

Honkanen, J.; Hughes, M.

2007

Raw Material and Process Factors Influencing Bond Strength Development in Veneer-Based Products

Rohumaa, Anti; Hughes, Mark; Ohlmeyer, Martin; Kallio, Timo

2007

ISBN: 978-1-84220-097-1

Process Factors Influencing Birch (Betula pendula Roth) Veneer Surface Properties and Bond Strength Development in Veneer-Based Products

Rohumaa, Anti; Antikainen, Toni; Hughes, Mark; Ohlmeyer, Martin

2007

Non-refereed scientific articles

Book section

Composites Historical, contemporary & future applications

Hänninen, Tuomas; Hughes, Mark

2010

ISBN: 978-0-470-69508-1

Unrefereed conference proceedings

The behaviour of sorption hysteresis in the water vapour sorption isotherm of thermally modified wood

Hill, Callum AS; Ramsay, James; Rautkari, Lauri; Hughes, Mark; Laine, Kristiina

2013

Set-recovery of densified and thermally modified wood under repeated soaking-drying-cycles

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark

2013

Increasing solid wood density by compression

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark

2013

Adhesion of polyurethane coating on surface densified Scots pine wood

Laine, Kristiina; Rautkari, Lauri; Kricej, Borut; Pavlic, Matjaz; Petric, Marko; Hughes, Mark; Kutnar, Andreja

2013

Coated surface densified wood: water vapour absorption and desorption related dimensional changes

Petric, Marko; Hughes, Mark; Kricej, Borut; Kutnar, Andreja; Laine, Kristiina; Medved, Sergej; Pavlic, Matjaž; Rautkari, Lauri

2013

Artificial accelerated ageing of surface densified spruce and pine wood

Petric, Marko; Kricej, Borut; Medved, Sergej; Pavlic, Matjaz; Laine, Kristiina; Hughes, Mark; Rautkari, Lauri; Kutnar, Andreja

2013

Studies on heat-treated vibrational welded wood

Ruponen, Jussi; Rhême, Martin; Ferrari, Silvia; Rautkari, Lauri; Hughes, Mark

2013

Internal vapour pressure in wood based panels during hot-pressing process

Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark

2013

High-temperature thermomechanical pulp as a potential reinforcing element in composites

Solala, Iina; Antikainen, Toni; Hughes, Mark; Vuorinen, Tapani

2013 in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY (JOHN WILEY & SONS)

ISSN: 0065-7727

Acetylated TEMPO oxidized cellulose as reinforcing agent of poly (lactic) acid (PLA)

Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppälä, Jukka

2012

ISBN: 978-88-88785-33-2

Nanocellulose as a toughening agent

Bulota, Mindaugas; Hughes, Mark

2012

ISBN: 978-951-38-7880-1

ISSN: 2241-1211

Dynamic wettability of surface densified wood in open system

Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark

2012

Removing set-recovery of surface densified wood by heat-treatment (preliminary results)

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark

2012

Brinell hardness of surface densified Scots pine - The effect of process parameters.

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark

2012

ISBN: 978-961-6144-35-3

Influence of Vacuum Atmosphere Thermal Modification on the Bond Stability of Vibrational Welded Wood in Moist Conditions

Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark

2012

Plywood manufacture without adhesives

Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark

2012

ISBN: 978-609-02-0581-5

Accumulation of chemical substances in the xylem sap and seasonal characteristics in silver birch (Betula pendula) obtained by mechanical compression.

Yamamoto, Akio; Kontturi, Eero; Rohumaa, Anti; Hughes, Mark; Vuorinen, Tapani

2012

Preparation, characterization and mechanical properties of acetylated microfbrillated cellulose reinforced composites

Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark

2011

An investigation into the mechanical behaviour of surface-modified fibrillated cellulose reinforced composites

Bulota, M.; Hänninen, T.; Jääskeläinen, A-S.; Kontturi, Eero; Hughes, M.

2011

Wood surface densification by compression: Analysing the effect of process parameters

Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Laflin, Nick

2011

ISBN: 978-3-9523787-0-0

Wood surface densification using different techniques

Rautkari, Lauri; Hughes, Mark

2011

Peeling checks and their effect on phenol formaldehyde bonded birch plywood

Rohumaa, Anti; Logren, Janne; Hughes, Mark

2011

Bond properties of binderless bonded spruce plywood during immersion

Ruponen, Jussi; Rautkari, Lauri; Paajanen, Olli; Hughes, Mark

2011

Studies on self-bonded plywood

Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark

2011

A Preliminary study into the properties of laminated viscoelastic-thermal- compressed wood

Rautkari, Lauri; Hughes, Mark; Kamke, Frederick

2010

Enhancing the Properties of Plywood Produced by Auto-adhesion

Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark

2010

Measurement of Moisture Content and Density in Birch (Betual pendula) Veneer Using Microwave Technology

Antikainen, T.; Rohumaa, A.; Hughes, M.; Kairi, M.

2007

Sustainable Composites

Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; McCall, D.

2005

Structural Biocomposites from Flax: Manipulation of Fibre Architecture and Interface Engineering

Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; Carpenter, J.

2005

Mechanical Properties and Deformation Behaviour of Flax Fibre Composites

Carpenter, J.; Hughes, M.; Hill, C.

2003

Publications intended for professional communities

Article in professional conference proceedings

Effect of peeling checks on bond quality between Birch (Betula pendula) Veneer and PF-resin

Rohumaa, Anti; Logren, Janne; Hughes, Mark

2011

Published development or research report

The Mesoscale Compressive Mechanical Properties of Norway Spruce

Estrada, Albert Hernandez; Hughes, Mark

2014

Interfaces in wood-based materials

Rohumaa, Anti; Johansson, Leena-Sisko; Yamamoto, Akio; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Laine, Janne; Hughes, Mark

2010

Fracture Characteristics and Properties of Thermally Modified Timber made out of Beech

Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose

2009

The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products

Rohumaa, Anti; Paajanen, Olli; Hughes, Mark; Kairi, Matti

2006

Text book or professional handbook or guidebook or dictionary

Functional Wood

Cronhjort, Yrsa; Hughes, Mark; Paakkanen, Mikko; Sahi, Karola; Tukiainen, Pekka; Tulamo, Tomi-Samuel; Vahtikari, Katja

2016 in Aalto University publication series CROSSOVER (Aalto University)

ISBN: 978-952-60-6872-5

ISSN: 1799-4977

FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY

Loos, François; Verpoest, Ignaas; Müssig, Jörg; Hughes, Mark; Lomov, Stepan V.; Baley, Christophe; Davies, Peter; Baets, Joris; Ziegmann, Gerhard; Elsabbagh, Ahmed; Lilholt, Hans; Madsen, Bo; Gomina, Moussa; Le Duigou, Antoine; Van Acker, Joris

2012

ISBN: 978-2-9526276-1-0

Tough cellulose reinforced composites

Bulota, Mindaugas; Hughes, Mark

2012 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)

ISSN: 0065-7727

Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control

Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Vuorinen, Tapani

2012 in PHARMACEUTICAL BIOLOGY (INFORMA HEALTHCARE)

ISSN: 1388-0209

Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites

Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark

2011 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)

ISSN: 0065-7727

Influence of preparation method on the mechanical properties of natural fibre reinforced composites

Bulota, Mindaugas; Hughes, Mark; Hanninen, Tuomas; Jaaskelainen, Anna S.

2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)

ISSN: 0065-7727

Fiber and material properties of Juniperus communis

Hänninen, Tuomas; Tukiainen, Pekka; Leppänen, Kirsi; Serimaa, Ritva; Hughes, Mark; Vuorinen, Tapani

2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)

ISSN: 0065-7727