Hannu Hänninen
Professor, Engineering Materials at Aalto University School of Business
Biography
Aalto University School of Business
Peer-reviewed scientific articles
Journal article-refereed, Original researchStrain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel
Malitckii, E.; Remes, H.; Lehto, P.; Yagodzinskyy, Y.; Bossuyt, S.; Hänninen, H.2018 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Localisation of plastic deformation in friction stir and electron beam copper welds
Forsström, Antti; Luumi, Lauri; Bossuyt, Sven; Hänninen, Hannu2017 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Effects of grain size and deformation temperature on hydrogen-enhanced vacancy formation in Ni alloys
Lawrence, Samantha K.; Yagodzinskyy, Yuriy; Hänninen, Hannu; Korhonen, Esa; Tuomisto, Filip; Harris, Zachary D.; Somerday, Brian P.2017 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Hydrogen effects on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, E.; Yagodzinskyy, Y.; Lehto, P.; Remes, H.; Romu, J.; Hänninen, H.2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Thermal ageing and short-range ordering of Alloy 690 between 350 and 550 °C
Mouginot, Roman; Sarikka, Teemu; Heikkilä, Mikko; Ivanchenko, Mykola; Ehrnstén, Ulla; Kim, Young Suk; Kim, Sung Soo; Hänninen, Hannu2017 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Hydrogen-induced delayed cracking in TRIP-aided lean-alloyed ferritic-austenitic stainless steels
Papula, Suvi; Sarikka, Teemu; Anttila, Severi; Talonen, Juho; Virkkunen, Iikka; Hänninen, Hannu2017 in MATERIALS (MDPI AG)ISSN: 1996-1944Behavior of small cracks under negative stress ratio fatigue loading
Roiko, A.; Solin, Jussi; Hänninen, H.2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Effect of mechanical mismatch on fracture mechanical behavior of SA 508 – Alloy 52 narrow gap dissimilar metal weld
Sarikka, Teemu; Ahonen, Matias; Mouginot, Roman; Nevasmaa, Pekka; Karjalainen-Roikonen, Päivi; Ehrnstén, Ulla; Hänninen, Hannu2017 in INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (ELSEVIER SCI LTD)ISSN: 0308-0161Environmentally assisted cracking crack initiation in nickel-based alloy dissimilar metal welds in doped and pure steam and pressurized water reactor water
Toivonen, Aki; Hänninen, Hannu; Saukkonen, Tapio; Aaltonen, Pertti2017 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Investigation of microstructure changes in ODS-EUROFER after hydrogen loading
Emelyanova, O. V.; Ganchenkova, M. G.; Malitskii, Evgenii; Yagodzinskyy, Y. N.; Klimenkov, M.; Borodin, V. A.; Vladimirov, P. V.; Lindau, R.; Möslang, A.; Hänninen, Hannu2016 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Weldability of Ni-Based Superalloys Waspaloy® and Haynes® 282® - A Study Performed with Varestraint Testing
Jacobsson, J. ; Andersson, Joel; Brederholm, Anssi; Hänninen, Hannu2016 in Research & Reviews: Journal of Material Sciences (Elsevier Science B.V.)ISSN: 2347-2278Gamma radiation induces hydrogen absorption by copper in water
Lousada, Cláudio M.; Soroka, Inna L.; Yagodzinskyy, Yuriy; Tarakina, Nadezda V.; Todoshchenko, Olga; Hänninen, Hannu; Korzhavyi, Pavel A.; Jonsson, Mats2016 in SCIENTIFIC REPORTS (NATURE PUBLISHING GROUP)ISSN: 2045-2322Material characterization of high-frequency mechanical impact (HFMI)-treated high-strength steel
Mikkola, Eeva; Marquis, Gary; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu2016 in MATERIALS AND DESIGN (Elsevier BV)ISSN: 0264-1275Strain hardening of cold-rolled lean-alloyed metastable ferritic-austenitic stainless steels
Papula, Suvi; Anttila, Severi; Talonen, Juho; Sarikka, Teemu; Virkkunen, Iikka; Hänninen, Hannu2016 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093The relation between lattice parameters and very low twinning stress in Ni50Mn25+xGa25-x magnetic shape memory alloys
Straka, L.; Drahokoupil, J.; Pacherova, O.; Fabianova, K.; Kopecky, V.; Seiner, H.; Hänninen, Hannu; Heczko, O.2016 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)ISSN: 0964-1726Role of excessive vacancies in transgranular stress corrosion cracking of pure copper
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Saukkonen, Tapio; Kilpeläinen, Simo; Tuomisto, Filip; Hänninen, Hannu2015 in CORROSION REVIEWS (Freund Publishing House Ltd)ISSN: 0334-6005Grain boundary engineering of metastable 204Cu, 301, and 301LN austenitic stainless steels to improve their sensitization resistance
Forsström, Antti; Talonen, Juho; Saukkonen, Tapio; Hänninen, Hannu2015 in MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (John Wiley and Sons Ltd)ISSN: 0947-5117Hydrogen-induced crack nucleation in tensile testing of EUROFER 97 and ODS-EUROFER steels at elevated temperature
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Hydrogen uptake from plasma and its effect on EUROFER 97 and ODS-EUROFER steels at elevated temperatures
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in FUSION ENGINEERING AND DESIGN (Elsevier BV)ISSN: 0920-3796Hydrogen charging process instrument
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in FUSION ENGINEERING AND DESIGN (Elsevier BV)ISSN: 0920-3796Characterization of delayed cracking in deep drawn swift cups of metastable austenitic stainless steels
Ortega, S.; Papula, Suvi; Saukkonen, Tapio; Talonen, Juho; Hänninen, Hannu2015 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XDelayed cracking of low-nickel austenitic stainless steel studied with constant load tensile testing
Papula, Suvi; Talonen, Juho; Hänninen, Hannu2015 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XDelayed cracking of metastable austenitic stainless steels after deep drawing
Papula, Suvi; Saukkonen, Tapio; Talonen, Juho; Hänninen, Hannu2015 in ISIJ INTERNATIONAL (Iron and Steel Institute of Japan)ISSN: 0915-1559Effect of Electrochemical Potential on Stress Corrosion Cracking Susceptibility of EN 1.4301 (AISI 304) Austenitic Stainless Steels in Simulated Hot Black Liquor
Pohjanne, Pekka; Vepsäläinen, Mikko; Saario, Timo; Sipilä, Konsta; Romu, Jyrki; Saukkonen, Tapio; Hänninen, Hannu; Heikkilä, Mikko; Koskiniemi, Juha; Berg, Carl-Gustav; Pulliainen, Martti; Virtanen, Isto; Ohligschläger, Thomas2015 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Hydrogen effects on fracture of high-strength steels with different micro-alloying
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Yagodziska, Valentina; Saukkonen, Tapio; Hänninen, Hannu2015 in CORROSION REVIEWS (Freund Publishing House Ltd)ISSN: 0334-6005Effect of MnS inclusion dissolution on carbon steel stress corrosion cracking in fuel-grade ethanol
Torkkeli, Janne; Saukkonen, Tapio; Hänninen, Hannu2015 in Corrosion Science (Elsevier Limited)ISSN: 0010-938XEffects of hydrogen and impurities on void nucleation in copper Simulation point of view
Ganchenkova, M. G.; Yagodzinskyy, Y. N.; Borodin, V. A.; Hänninen, Hannu2014 in PHILOSOPHICAL MAGAZINE (Taylor and Francis Ltd.)ISSN: 1478-6435Influence of grain size distribution on the Hall-Petch relationship of welded structural steel
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Effect of internal hydrogen on delayed fracture of metastable low-Ni austenitic stainless steels
Papula, Suvi; Talonen, Juho; Todoshchenko, Olga; Hänninen, Hannu2014 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Effect of Residual Stress and Strain-Induced a´-Martensite on Delayed Cracking of Metastable Austenitic Stainless Steels
Papula, Suvi; Talonen, Juho; Hänninen, Hannu2014 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Pitting Corrosion Resistance of Mn-alloyed Austenitic Stainless Steels
Pulkkinen, Heikki; Apajalahti, Helka; Papula, Suvi; Talonen, Juho; Hänninen, Hannu2014 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683Mechanically-induced demagnetization and remanent magnetization rotation in Ni-Mn-Ga(-B) magnetic shape memory alloy
Straka, Ladislav; Soroka, Aleksandr; Heczko, Oleg; Hänninen, Hannu; Sozinov, Alexei2014 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Role of Nonmetallic Inclusions on Hydrogen Embrittlement of High-strength Carbon Steels with Different Micro-alloying
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Saukkonen, Tapio; Hänninen, Hannu2014 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Stress corrosion cracking of carbon steel in ethanolgasoline blends
Torkkeli, Janne; Saukkonen, Tapio; Hänninen, Hannu2014 in MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (John Wiley and Sons Ltd)ISSN: 0947-5117Differences between secondary and primary flash formation on coating of HSS with AISI 316 using friction surfacing
Vilaça, Pedro; Hänninen, Hannu; Saukkonen, Tapio; Miranda, Rosa M.2014 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288Hydrogen Effect of Tensile Properties of EUROFER 97 and ODS-EUROFER Steels
Yagodzinskyy, Y.; Malitckii, E.; Ganchenkova, M.; Binyukova, S.; Emelyanova, O.; Saukkonen, T.; Hänninen, H.; Lindau, R.; Vladimirov, P.; Moeslang, A.2014 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Comparative Study of Hydrogen Uptake and Diffusion in ODS Steels
Malitckii, E.; Yagodzinskyy, Y.; Ganchenkova, M.; Binyukova, S.; Hänninen, H.; Lindau, R.; Vladimirov, P.; Moeslang, A.2013 in FUSION ENGINEERING AND DESIGN (Elsevier BV)ISSN: 0920-3796Effect of Inclusions and Precipitates on Hydrogen Embrittlement of Mn-Alloyed Austenitic Stainless Steels
Pulkkinen, Heikki; Papula, Suvi; Todoshchenko, Olga; Talonen, Juho; Hänninen, Hannu2013 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683Corrosion resistance of alloys F91 and Fe-12Cr-2Si in lead-bismuth eutectic up to 715°C
Short, Michael; Ballinger, Ronald; Hänninen, Hannu2013 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Effect of intermartensite transformation on twinning stress in Ni-Mn-Ga 10?M martensite
Straka, L.; Sozinov, A.; Drahokoupil, J.; Kopecký, V.; Hänninen, H.; Heczko, O.2013 in JOURNAL OF APPLIED PHYSICS (AIP Publishing)ISSN: 0021-8979Thermal Desorption of Hydrogen from AISI 316L Stainless Steel and Pure Nickel
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Hänninen, Hannu2013 in DEFECT AND DIFFUSION FORUM (Trans Tech Publications)ISSN: 1012-0386Mechanistic study of stress corrosion cracking of carbon steel in ethanol
Torkkeli, Janne; Hirsi, Valtteri; Saukkonen, Tapio; Hänninen, Hannu2013 in MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (John Wiley and Sons Ltd)ISSN: 0947-5117Hydrogen-Induced Mechanical Losses in Oxygen-Free Copper
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2012 in SOLID STATE PHENOMENA (Scientific.net)ISSN: 1012-0394Anisotropic distribution of non-metallic inclusions in a forged steel roll and its influence on fatigue limit
Roiko, Andrew; Hänninen, Hannu; Vuorikari, Hannu2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Banding in Copper Friction Stir Weld
Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2012 in SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (Maney Publishing)ISSN: 1362-1718Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel
Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2012 in WORLD JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY (Maney Publishing)ISSN: 2161-6795Steady-State Tensile Viscous Flow Forming of Bulk Metallic Glass
Soinila, Erno; Bossuyt, Sven; Hänninen, Hannu2012 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)ISSN: 0925-8388Temperature Dependence of Twinning Stress of Type I and Type II Twins in 10M Modulated Ni-Mn-Ga Martensite
Straka, Ladislav; Soroka, Alexandr; Seiner, Hanus; Hänninen, Hannu; Sozinov, Alexei2012 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Hydrogen-Enhanced Creep and Cracking of Oxygen-Free Phosphorus-Doped Copper
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Saukkonen, Tapio; Hänninen, Hannu2012 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Hydrogen-Dislocation Interaction in Austenitic Stainless Steel Studied with Mechanical Loss Spectroscopy
Yagodzinskyy, Yuriy; Ivanchenko, Mykola; Hänninen, Hannu2012 in SOLID STATE PHENOMENA (Scientific.net)ISSN: 1012-0394Thermodynamic modeling of the stacking fault energy of austenitic steels
Curtze, Sven; Kuokkala, Veli-Tapani; Oikari, Aino; Talonen, Juho; Hänninen, Hannu2011 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Stress Corrosion Cracking of Carbon Steel in Ethanol
Hirsi, Kalle Valtteri; Torkkeli, Janne; Hänninen, Hannu2011 in WELDING AND CUTTING (Deutscher Verlag fur Schweisstechnik GmbH)ISSN: 1612-3433Stress Corrosion Cracking Crevice Interaction in Austenitic Stainless Steels Characterized by Acoustic Emission
Leinonen, Heikki; Schildt, Tanja; Hänninen, Hannu2011 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623A combined arc-melting and tilt-casting furnace for the manufacture of high-purity bulk metallic glass materials
Soinila, Erno; Pihlajamäki, Tuomas; Bossuyt, Sven; Hänninen, Hannu2011 in REVIEW OF SCIENTIFIC INSTRUMENTS (AMER INST PHYSICS)ISSN: 0034-6748Bulk metallic glass tube casting
Soinila, Erno; Antin, Kim-Niklas; Bossuyt, Sven; Hänninen, Hannu2011 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)ISSN: 0925-8388Highly mobile twinned interface in 10 M modulated Ni-Mn-Ga martensite: Analysis beyond the tetragonal approximation of lattice
Straka, Ladislav; Heczko, Oleg; Seiner, Hanus; Lanska, Natalyia; Drahokoupil, Jan; Soroka, Alexandr; Fähler, Sebastian; Hänninen, Hannu; Sozinov, Alexei2011 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Twin interaction and large magnetoelasticity in Ni-Mn-Ga single crystals
Straka, Ladislav; Hänninen, Hannu; Lanska, Natalyia; Sozinov, Alexei2011 in JOURNAL OF APPLIED PHYSICS (AIP Publishing)ISSN: 0021-8979Temperature dependence of single twin boundary motion in NiMnGa martensite
Straka, Ladislav; Hänninen, Hannu; Heczko, Oleg2011 in APPLIED PHYSICS LETTERS (AMERICAN INSTITUTE OF PHYSICS)ISSN: 0003-6951Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption Spectroscopy
Yagodzinskyy, Yuriy; Todoshchenko, Olga; Papula, Suvi; Hänninen, Hannu2011 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683Effect of Hydrogen on Plastic Strain Localization in Single Crystals of Austenitic Stainless Steel
Yagodzinskyy, Yuriy; Saukkonen, Tapio; Kilpeläinen, Simo; Tuomisto, Filip; Hänninen, Hannu2010 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Effect of Plastic Deformation on Anelastic Mechanical Losses in Multicomponent Substitutional Austenitic Alloys
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2009 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Microstructural Manifestation of Dynamic Strain Aging in AISI 316 Stainless Steel
Karlsen, Wade; Ivanchenko, Mykola; Ehrnsten, Ulla; Yagodzinskyy, Yuriy; Hänninen, Hannu2009 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Corrosion Properties of Nickel-Free Austenitic Stainless Steels in 0.5M H2SO4 and 0.5M H2SO4 + 0.4M NaCl
Milititsky, M.; Verhaege, M.; De Wispelaere, N.; Peguet, L.; Zoppas Ferreira, J.; Hänninen, Hannu2009 in CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (Maney Publishing)ISSN: 1478-422XInfluence of Chunky Graphite on Mechanical and Fatigue Properties of Heavy Section Cast Iron
Mourujärvi, A.; Widell, K.; Saukkonen, T.; Hänninen, H.2009 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XEffect of substrate deformation on functional properties of atomic-layer-deposited TiO2 coatings on stainless steel
Straka, Ladislav; Kawakami, Hiroshi; Romu, Jyrki; Ilola, Risto; Mahlberg, Riitta; Heikkilä, Mikko; Hänninen, Hannu2009 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090Anelastic Mechanical Loss Spectrometry of Hydrogen in Austenitic Stainless Steels
Yagodzinskyy, Yuriy; Andronova, Ekaterina; Ivanchenko, Mykola; Hänninen, Hannu2009 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Mechanical and Corrosion Properties of Spot-welded High-strength Austenitic Stainless Steel EN 1.4318
Alenius, Marko; Somervuori, Mervi; Hänninen, Hannu2008 in MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (John Wiley and Sons Ltd)ISSN: 0947-5117Photocatalytic Activity of Atomic Layer Deposited TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys
Kawakami, Hiroshi; Ilola, Risto; Straka, Ladislav; Papula, Suvi; Romu, Jyrki; Hänninen, Hannu; Mahlberg, Riitta; Heikkila, Mikko2008 in JOURNAL OF THE ELECTROCHEMICAL SOCIETY (ELECTROCHEMICAL SOC INC)ISSN: 0013-4651Impact Toughness Properties of Nickel-Free Austenitic Stainless Steels
Milititsky, Marcio; Matlock, D.K.; Reguly, A.; De Wispelaere, N.; Penning, Jan; Hänninen, Hannu2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Characterization of the Mechanical Properties of Low-nickel Austenitic Stainless Steels
Milititsky, Marcio; De Wispelaere, N.; Petrov, Roumen; Ramos, J.E.; Reguly, A.; Hänninen, Hannu2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Detection of structural damage of aluminum alloy 6082 using elastic wave modulation spectroscopy
Straka, Ladislav; Yagodzinskyy, Yuriy; Landa, Michal; Hänninen, Hannu2008 in NDT & E INTERNATIONAL (ELSEVIER SCI LTD)ISSN: 0963-8695Open-circuit potential as an indicator of damage of atomic layer deposited TiO2 on AISI 304 stainless steel
Straka, Ladislav; Yagodzinskyy, Yuriy; Kawakami, Hiroshi; Romu, Jyrki; Ilola, Risto; Hänninen, Hannu2008 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090Activation of magnetic shape memory effect in Ni-Mn-Ga alloys by mechanical and magnetic treatment
Straka, Ladislav; Heczko, Oleg; Hänninen, Hannu2008 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Mechanical Properties of Spot-Welded Austenitic Stainless Steels and their Dissimilar Metal Joints
Alenius, Marko; Hänninen, Hannu2007 in Stainless Steel World (PERGAMON-ELSEVIER SCIENCE LTD)Fracture of Titanium Plates Used for Mandibular Reconstruction Following Ablative Tumor Surgery
Martola, Martta; Lindqvist, Christian; Hänninen, Hannu; Al-Sukhun, Jehad2007 in JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B: APPLIED BIOMATERIALS (John Wiley and Sons Inc.)Formation of Shear Bands and Strain-induced Martensite During Plastic Deformation of Metastable Austenitic Stainless Steels
Talonen, Juho; Hänninen, Hannu2007 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Energetics of Plastic Deformation of Metastable Austenitic Stainless Steels
Talonen, Juho; Hänninen, Hannu2007 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683Exploring the Mechanical Properties of Spot Welded Dissimilar Joints for Stainless and Galvanized Steels
Alenius, M.; Pohjanne, P.; Somervuori, M.; Hänninen, Hannu2006 in WELDING JOURNAL (American Welding Society)ISSN: 0043-2296Internal Friction Studies of Carbon and its Redistribution Kinetics in Inconel 600 and 690 Alloys under Dynamic Strain Aging Conditions
Ivanchenko, Mykola; Nevdacha, V.; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093State-of-the-Art of Friction Stir Processing (FSP)
Savolainen, Kati; Mononen, Jukka; Hänninen, Hannu2006 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)Corrosion Fatigue of Weld-Bonded Austenitic Stainless Steels in 3.5 % NaCl Solution
Somervuori, Mervi; Alenius, Marko; Kosonen, Topi; Karppi, Risto; Hänninen, Hannu2006 in MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (John Wiley and Sons Ltd)ISSN: 0947-5117Effect of Tensile Properties on the Energy-Absorbing Capacity of Weld-Bonded Austenitic Stainless Steel Profiles
Talonen, J; Hänninen, Hannu2006 in INTERNATIONAL JOURNAL OF CRASHWORTHINESS (Taylor and Francis Ltd.)Forced Torsion Pendulum for Studies of Internal Friction at Solid-liquid Interface
Yagodzinskyy, Yuriy; Straka, Ladislav; Hänninen, Hannu2006 in Material Science & Engineering (Taylor and Francis Ltd.)Forced torsion pendulum for studies of interactions at solid-liquid interface
Yagodzinskyy, Y.; Straka, L.; Hänninen, Hannu2006 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093MFI®-suodatinteknologia hitsaushuurujen poistamiseen
Koskinen, Ari; Santasalo, Juha; Kasurinen, Heikki; Hänninen, Hannu2005 in HITSAUSTEKNIIKKA (ELSEVIER SCIENCE SA LAUSANNE)Hitsaajan henkilökohtaisen altistuksen vähentäminen puhallinmaskeilla
Koskinen, Ari; Kasurinen, Heikki; Hänninen, Hannu2005 in HITSAUSTEKNIIKKA (ELSEVIER SCIENCE SA LAUSANNE)Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2005 in TRIBOLOGIA (Suomen Tribologiayhdistys)ISSN: 0780-2285Effect of strain rate on the strain-induced γ, → α′-martensite transformation and mechanical properties of austenitic stainless steels
Talonen, Juho; Nenonen, Pertti; Pape, Gersom; Hänninen, Hannu2005 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Effect of Strain-induced g->a' Transformation on Mechanical Properties of Austenitic Stainless Steels
Talonen, Juho; Nenonen, Pertti; Pape, G.; Hänninen, Hannu2005 in Metallurgical and Materials Transactions (Springer Boston)Interactions of Hydrogen in Copper Studied by Internal Friction Method
Aaltonen, Pertti; Nevdacha, Vitaly; Tarasenko, O.; Yagodzinskyy, Yuriy; Hänninen, Hannu2004 in Materials Science and Engineering A (Springer Boston)Interactions of hydrogen in copper studied by internal friction technique
Aaltonen, P.; Nevdacha, V.; Tarasenko, O.; Yagodzinskyy, Y.; Hänninen, Hannu2004 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Manufacturing of shapes forms from stainless steels with superplastic forming
Romu, Jyrki; Yagodzinskyy, Yuriy; Bleck, Wofgang; Hänninen, Hannu2004 in Materials Science Forum (Trans Tech Publications)Manufacturing of Shaped Forms from Stainless Steels with Superplastic Forming
Romu, Jyrki; Yagodzinskyy, Yuriy; Beck, Werner; Hänninen, Hannu2004 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Mechanical ana corrosion properities of P/M-HIP super duplex stainless steel after different industrial heat treatments as used for large components
Smuk, O; Hänninen, Hannu; Liimatainen, J2004 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Mechanical and Corrosion Properties of P/M-HIP Super Duplex Stainless Steel after Different Industrial Heat Treatments as Used for Large Components
Smuk, Olena; Hänninen, Hannu; Liimatainen, Jari2004 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)Microstructures of a Powder Metallurgy--Hot-Isostatically Pressed Super Duplex Stainless Steel Forming in Industrial Heat Treatments
Smuk, O. ; Hänninen, Hannu; Nenonen, P.; Liimatainen, J.2004 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Corrosion Fatigue of Spot-Welded Austenitic Stainless Steels in 3.5 % NaCl Solution
Somervuori, M.E.; Alenius, M.T.; Hänninen, Hannu; Karppi, Risto2004 in Materials and Corrosion (Springer Boston)Characterisation and Corrosion of Spot Welds of Austenitic Stainless Steels
Somervuori, M. E. ; Johansson, Leena-Sisko; Heinonen, M.; van Hoecke, D.H.D; Akdut, N.; Hänninen, Hannu2004 in MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (John Wiley and Sons Ltd)ISSN: 0947-5117Comparison of the Electric Properties and ESCA Result of Oxide Films Formed on AISI 316L Steel in Simulated BWR Conditions During SSRT
Takeda, Yoichi; Bojinov, Martin; Hänninen, Hannu; Kinnunen, Petri; Laitinen, Timo; Mäkelä, Kari; Saario, Timo; Sakaguchi, K.; Shoji, T.; Sirkiä, Pekka; Toivonen, Aki2004 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Comparison of the Electric Properties and ASCA Result of Oxide Films Formed on AISI 316 LNG Steel in Simulated BWR Conditions During SSRT
Takeda, Y.; Bojinov, M.; Hänninen, Hannu; Kinnunen, P.; Laitinen, T.; Mäkelä, K.; Saario, T.; Sakaguchi, K.; Shoji, T.; Sirkiä, P.; Toivonen, A.2004 in KEY ENGINEERING MATERIALS (Trans Tech Publications)Comparison of Different Methods to Measure Strain-Induced a?-Martensite Content in Austenitic Steels
Talonen, Juho; Aspegren, P.; Hänninen, Hannu2004 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)Damping Properties of Austenitic Stainless Steels Containing Strain-Induced Martensite
Talonen, Juho; Hänninen, Hannu2004 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Comparison of different methods for measuring strain induced α′-martensite content in austenitic steels
Talonen, J.; Aspegren, P.; Hänninen, Hannu2004 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Grain Refinement Process for Superplastic Forming of AISI 301 and 304L Austenitic Stainless Steels
Yagodzinskyy, Yuriy; Pimenoff, Joe; Tarasenko, J.; Romu, Jyrki; Nenonen, Pertti; Hänninen, Hannu2004 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)Grain refinement processes for superplastic forming of AISI 304 and 304L austenitic stainless steels
Yagodzinskyy, Y.; Pimenoff, J.; Tarasenko, O.; Romu, J.; Nenonen, P.; Hänninen, Hannu2004 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Comparison of Realistic Artificial Cracks and In-service Cracks
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Paussu, Raimo; Hänninen, Hannu2003 in The e-Journal of Nondestructive Testing & Ultrasonics (MANEY PUBLISHING)Advanced Flaw Production Method for In-Service Inspection Qualification Mock-ups
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Paussu, Raimo; Hänninen, Hannu2003 in Journal of Nuclear Engineering & Design (MANEY PUBLISHING)Realistic Cracks for In-Service Inspection Qualification Mock-ups
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Paussu, R.; Hänninen, Hannu2003 in The e-Journal of Nondestructive Testing & Ultrasonics (MANEY PUBLISHING)Cost Comparison of FSW and MIG Welded Aluminium Panels
Mononen, Jukka; Sirén, Mika; Hänninen, Hannu2003 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)Prediction and Measurement of Residual Stresses in Cladded Steel
Gripenberg, Hans; Keinänen, Heikki; Ohms, Carsten; Hänninen, Hannu; Stefanescu, Danut; Smith, David2002 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476On Irradiation Embrittlement and Recovery Annealing Mechanisms of Cr-Mo-V Type Pressure Vessel Steels
Ilola, Risto; Nadutov, Vitaliy; Valo, Matti; Hänninen, Hannu2002 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Dwell effects on high temperature fatigue behavior. Part I
Goswami, Tarun; Hänninen, Hannu2001 in MATERIALS AND DESIGN (Elsevier BV)ISSN: 0264-1275Dwell Effects on High Temperature Fatigue - Damage Mechanisms: Part II
Goswami, T.; Hänninen, Hannu2001 in Journal of Materials and Design (Elsevier BV)ISSN: 0261-3069Effects of Processing and Manufacturing of High Nitrogen-containing Stainless Steels on their Mechanical, Corrosion and Wear Properties
Hänninen, Hannu; Romu, Jyrki; Ilola, Risto; Tervo, Jyrki; Laitinen, Arttu2001 in Journal of Material Processing Technology (Elsevier BV)Tool wear and machinability of X5 CrMnN 18 18 stainless steels
Paro, Jukka; Hänninen, Hannu; Kauppinen, Veijo2001 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)ISSN: 0924-0136Effects of the temperature of warm rolling on the superplastic behaviour of AA5083 aluminium base alloy
Pimenoff, J.; Yagodzinskyy, Y.; Romu, J.; Hänninen, Hannu2001 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476A New Method for Studing Thermal Desorption of Hydrogen from Metals Based on Internal Friction Technique
Yagodzinskyy, Yu.; Tarasenko, O.; Smuk, S.; Aaltonen, P.; Hänninen, Hannu2001 in PHYSICA SCRIPTA (IOP Publishing Ltd.)A new method for studying thermal desorption of hydrogen from metals based on internal friction technique
Yagodzinskyy, Yuriy; Tarasenko, O.; Smuk, S.; Aaltonen, P.; Hänninen, Hannu2001 in PHYSICA SCRIPTA (IOP Publishing Ltd.)ISSN: 0031-8949Materiaalitekniikan opetuksen ja tutkimuksen kehitys Suomessa ja ulkomailla
Hänninen, Hannu2000 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Hydrogen-probe mechanical spectroscopy for studying local ordering in concentrated substitutional alloy
Jagodzinski, Yu.; Hänninen, Hannu; Smuk, S.; Tarasenko, O.2000 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)Interaction of Hydrogen with Dislocation Pile-Ups and Vacancy Generation at Plastic Deformation
Jagodzinski, Yu.; Hänninen, Hannu; Tarasenko, O.; Smuk, S.2000 in SCRIPTA MATERIALIA (Elsevier Limited)Internal Friction Study of Environmental Effects on Metals and Alloys
Jagodzinski, Yu.; Aaltonen, P.; Smuk, S.; Tarasenko, O.; Hänninen, Hannu2000 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)Interaction of hydrogen with dislocation pile-ups and hydrogen induced softening of pure iron
Jagodzinski, Yu; Hänninen, Hannu; Tarasenko, O.; Smuk, S.2000 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Narrow Gap GTA Welding of Stainless Steels
Korhonen, M.; Luukas, M.; Hänninen, Hannu2000 in Svetsaren (Elsevier Limited)Use of Stainless Steels in Bus Coach Structures
Kyröläinen, A.; Vilpas, M.; Hänninen, Hannu2000 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)Nominal Stress Range Fatigue of Stainless Steel Fillet Welds - the Effect of Weld Size
Lahti, K.; Hänninen, Hannu; Niemi, E.2000 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)Application of the internal friction method to studying microstructural effects in fusion materials
Tähtinen, S.; Jagodzinski, Yu.; Tarasenko, O.; Smuk, S.; Hänninen, Hannu2000 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)Corrosion properties of HNS
Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Dynamic strain aging of austenitic high nitrogen Cr-Ni and Cr-Mn steels
Ilola, R.; Kemppainen, M.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Internal friction study of hydrogen behaviour in low activated martensitic F82H steel
Jagodzinski, Yu; Tarasenko, A.; Smuk, S.; Tähtinen, S.; Hänninen, Hannu1999 in JOURNAL OF NUCLEAR MATERIALS (Elsevier Science B.V.)ISSN: 0022-3115Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Jagodzinski, Yu; Smouk, Sergei; Tarasenko, A.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steels studied by means of internal friction
Jagodzinski, Yu; Smouk, Sergei; Tarasenko, A.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCl2 solution
Leinonen, H.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
Romu, J.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Internal friction study of decomposition kinetics of SAF 2507 type duplex stainless steel
Smuk, O.; Jagodzinski, Yu; Tarasenko, O.; Smuk, S.; Hänninen, Hannu1999 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Effect of nitrogen alloying on elastic coefficients of austenitic stainless steels
Tervo, J.; Tarasenko, A.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Role of nitrogen in improving pitting corrosion resistance of high-alloy austenitic and duplex stainless steel welds
Vilpas, M.; Hänninen, Hannu1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Study of Snoek-type relaxation in hydrogenated Inconel 600
Aaltonen, P.; Jagodzinski, Yu; Tarasenko, A.; Smouk, S.; Hänninen, Hannu1998 in Philosophical Magazine A (TAYLOR & FRANCIS LTD)ISSN: 0141-8610Internal friction in brasses after oxidation in tap water by anodic polarisation
Aaltonen, P.; Jagodzinski, Y. U.; Tarasenko, A.; Smouk, S.; Hänninen, Hannu1998 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Study of Snoektype relaxation in hydrogenated Inconel-600
Aaltonen, P.; Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 in PHILOSOPHICAL MAGAZINE (Taylor and Francis Ltd.)Low-frequency internal friction of pure copper after anodic polarisation in sodium nitrite solution
Aaltonen, P.; Jagodzinski, Y.; Tarasenko, A.; Smouk, S.; Hänninen, Hannu1998 in Corrosion Science (Elsevier Limited)ISSN: 0010-938XCorrosion properties of HIPed P/M duplex stainless steels
Hämäläinen, E.; Korhonen, M.; Hänninen, H.; Liimatainen, J.1998 in Stainles Steel World (Elsevier Limited)Hot and Cold Rolling of High Nitrogen Cr-Ni and Cr-Mn Austenitic Stainless Steels
Ilola, Risto; Hänninen, Hannu; Kauppi, T.1998 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)ISSN: 1059-9495Mechanical properties of powder metallurgy duplex stainless steels
Hämäläinen, E.; Laitinen, A.; Hänninen, Hannu; Liimatainen, J.1997 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Internal friction of Fe-N martensite at low temperature
Liu, Y.; Hänninen, Hannu; Foct, J.1997 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Internal Friction in Hydrogen-Changed CrNi and CrNiMn Austenitic Stainless Steels
Gavriljuk, V.; Hänninen, H.; Smouk, S.; Tarasenko, A.; Ullakko, K.1996 in Metallurgical and Materials Transactions A (ELSEVIER SCIENCE SA LAUSANNE)Internal friction in hydrogen-charged CrNi and CrNiMn austenitic stainless steels
Gavriljuk, V. G.; Hänninen, Hannu; Smouk, S. Y U; Tarasenko, A. V.; Ullakko, K.1996 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Mechanical properties of austenitic high-nitrogen Cr-Ni and Cr-Mn steels at low temperatures
Ilola, Risto Juhani; Hänninen, Hannu; Ullakko, Kari1996 in ISIJ INTERNATIONAL (Iron and Steel Institute of Japan)ISSN: 0915-1559Comparison of grindability of HIPped austenitic 316L, duplex 2205 and super duplex 2507 and as-cast 304 stainless steels using alumina wheels
Jiang, Laizhu; Paro, Jukka; Hänninen, Hannu; Kauppinen, Veijo; Oraskari, Risto1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)ISSN: 0924-0136Active wear and failure mechanisms of TiN-coated high speed steel and TiN-coated cemented carbide tools when machining powder metallurgically made stainless steels
Jiang, Laizhu; Hänninen, Hannu; Paro, Jukka; Kauppinen, Veijo1996 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Effects of the composition, shape factor and area fraction of sulfide inclusions on the machinability of re-sulfurized free-machining steel
Jiang, Laizhu; Cui, Kun; Hänninen, Hannu1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)ISSN: 0924-0136Effect of non-metallic inclusions on corrosion fatigue resistance of P/M duplex stainless steels
Laitinen, A.; Hänninen, Hannu1996 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XCorrosion fatigue resistance of powder metallurgy and forged duplex stainless steels
Laitinen, A.; Hänninen, Hannu1996 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Chloride-Induced Stress Corrosion Cracking of Powder Metallurgy Duplex Stainless Steels
Laitinen, A.; Hänninen, H.1996 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Active Wear and Failure Mechanisms of Tin-Coated High Speed and TiN-Coated Cemented Carbide Tools when Machining Powder Metallurgically Made Stainless Steels
Laizhu, J.; Hänninen, H.; Paro, j.; Kauppinen, V.1996 in Metallurgical and Materials Transactions (National Association of Corrosion Engineers)Development of properties of P/M austenitic stainless steels by nitrogen infusion
Romu, J. J.; Tervo, Jyrki; Hänninen, Hannu; Liimatainen, J.1996 in ISIJ INTERNATIONAL (Iron and Steel Institute of Japan)ISSN: 0915-1559Phase transformations and relaxation phenomena caused by hydrogen in stable austenitic stainless steels
Gavriljuk, V. G.; Hänninen, Hannu; Tarasenko, A. V.; Tereshchenko, A. S.; Ullakko, K.1995 in Acta Metallurgica Et Materialia (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0956-7151Stabilization of Austenite Associated with Pior Formation of Martensite
Hänninen, H.; Xie, Z.; Liu, Y.1995 in Journal de Physique IV (EDITIONS PHYSIQUE)ISSN: 1155-4339Jälkikäsittelyn vaikutus ruostumattoman teräksen hitsin koroosionkestävyyteen
Lahti, Kari; Hänninen, H.1995 in Kunnossapito (EDITIONS PHYSIQUE)ISSN: 0784-1787Isothermal martensitic transformation as an internal stress-increasing process
Liu, Y; Xie, ZL; Hänninen, Hannu; VanHumbeeck, J; Pietikainen, J1995 in Journal de Physique IV (EDITIONS PHYSIQUE)ISSN: 1155-4339Ruostumattomat teräkset kuljetusvälineissä
Vilpas, M.; Lahti, K.; Lokka, M.; Hänninen, H.1995 in HITSAUSTEKNIIKKA (EDITIONS PHYSIQUE)Stabilization of austenite associated with prior formation of martensite
Xie, ZL; Liu, Y; Hänninen, Hannu1995 in Journal de Physique IV (EDITIONS PHYSIQUE)ISSN: 1155-4339Hydrogen-induced phases in AISI 310 type steel
Gavriljuk, V. G.; Hänninen, Hannu; Tereshchenko, A. S.; Ullakko, K.1994 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)ISSN: 0956-716XWelding Research
Karppi, R.; Hänninen, H.; Brederholm, A.; Martikainen, J.Ion; Niemi, E.; Moisio, T.; Tiainen, T.; Karjalainen, P.1994 in HITSAUSTEKNIIKKA (Pergamon Press Ltd.)Adhesive Wear of High Nitrogen Austenitic Stainless Steel
Tervo, J.; Ylöstalo, O.; Hänninen, H.; Liimatainen, J.1994 in TRIBOLOGIA (Suomen Tribologiayhdistys)Stabilization of retained austenite due to partial martensitic transformations
Xie, Z. L.; Liu, Y.; Hänninen, Hannu1994 in Acta Metallurgica Et Materialia (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0956-7151Cyclic crack growth evaluation of a 20MnMoNi55 piping steel in high-oxygen reactor water
Aaltonen, Pertti; Rintamaa, Rauno; Hänninen, Hannu; Ehrnstén, Ulla; Arilahti, Esko1993 in NUCLEAR ENGINEERING AND DESIGN (Elsevier Science)ISSN: 0029-5493Effects of nitrogen on hydrogen-induced phase transformations in stable austenitic steel
Gavriljuk, V. G.; Hänninen, Hannu; Tereshchenko, A. S.; Ullakko, K.1993 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)ISSN: 0956-716XOn Internal Friction Mechanisms in Hydrogen Charges Stable Austenitic Stainless Steel
Gavriljuk, V.; Hänninen, H.; Jagodzinsky, Y.; Tarasenko, A.; Tähtinen, S.; Ullakko, K.1993 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)Effect of nitrogen on internal friction of hydrogen charged stable austenitic stainless steels
Gavriljuk, V. G.; Hänninen, Hannu; Tarasenko, A. V.; Ullakko, K.1993 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)ISSN: 0956-716XOn internal friction mechanisms in hydrogen charged stable austenitic stainless steel
Gavriljuk, V. G.; Hänninen, Hannu; Jagodzinsky, Yu N.; Tarasenko, A. V.; Tähtinen, S.; Ullakko, K.1993 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)ISSN: 0956-716XIn situ observations on effects of hydrogen on deformation and fracture of A533B pressure vessel steel
Hänninen, Hannu; Lee, T. C.; Robertson, I. M.; Birnbaum, H. K.1993 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)ISSN: 1059-9495Phenomena of material degradation with time relevant to reactor pressure vessels
Hänninen, Hannu1993 in INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (ELSEVIER SCI LTD)ISSN: 0308-0161Overview of the Nuclear Power Plant Structural Integrite Research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, H.; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.; Wallin, K.; Valo, M.1993 in INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (ELSEVIER SCI LTD)Overview of the nuclear power plant structural integrity research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, Hannu; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.; Wallin, K.; Valo, M.1993 in INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (ELSEVIER SCI LTD)ISSN: 0308-0161Substructures of Thin Plate Martensite Formed under Applied Plane Stresses at 4K
Xie, Z.; Hänninen, H.; Pietikäinen, J.1993 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)Isothermal martensitic transformation under hydrostatic pressure in an Fe-Ni-C alloy at low temperatures
Xie, Z. L.; Sundqvist, B.; Hänninen, Hannu; Pietikäinen, J.1993 in Acta Metallurgica Et Materialia (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0956-7151Substructures of thin-plate martensite formed under applied plane stress at 4 K
Xie, Z. L.; Hänninen, Hannu; Pietikäinen, J.1993 in Scripta Metallurgica et Materialia (Pergamon Press Ltd.)ISSN: 0956-716XThe Use of Different Techniques for Determination of Pitting Corrosion Potential of Austenitic Stainless Steel
Eskelinen, P.; Forsen, O.; Hänninen, H.; Onnela, J.; Yläsaari, S.1992 in Materials Science Forum (Trans Tech Publications)Characterization of austenitic stainless steel pipe welds after prolonged power plant exposure
Hänninen, Hannu; Aaltonen, P.; Nenonen, P.; Jargelius, R.; Lehtinen, B.1992 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Static and cyclic crack growth of low alloy steels in high-oxygen water simulating HDR test conditions
Hänninen, Hannu; Aaltonen, Pertti; Rintamaa, Rauno; Arilahti, Esko; Ehrnstén, Ulla1992 in NUCLEAR ENGINEERING AND DESIGN (Elsevier Science)ISSN: 0029-5493Evaluation of the EPR technique for measuring sensitization in type 304 stainless steel
Jargelius, R. F A; Hertzman, S.; Symniotis, E.; Hänninen, Hannu; Aaltonen, P.1991 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Stress corrosion and thermal fatigue - Experiences and countermeasures in austenitic SS pipings of finnish bwr-plants
Hakala, J.; Hänninen, Hannu; Aaltonen, P.1990 in NUCLEAR ENGINEERING AND DESIGN (Elsevier Science)ISSN: 0029-5493Effects of MnS inclusion dissolution on environmentally assisted cracking in low-alloy and carbon steels
Hänninen, Hannu; Cullen, W.; Kemppainen, M.1990 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Environment sensitive cracking in pressure boundary materials of light water reactors
Hänninen, Hannu; Aho-Mantila, I.; Törrönen, K.1987 in INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (ELSEVIER SCI LTD)ISSN: 0308-0161Hydrogen-induced microtwinning in ferritic stainless steels
Tähtinen, S.; Nenonen, P.; Hänninen, Hannu1987 in Scripta Metallurgica (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0036-9748Hydrogen-induced phase transformations in an austenitic stainless steel
Tähtinen, S.; Nenonen, P.; Hänninen, Hannu1986 in Scripta Metallurgica (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0036-9748EFFECT OF TEMPERING ON CORROSION AND MECHANICAL PROPERTIES OF CAST ALUMINIUM BRONZES.
Aaltonen, Pertti; Klemetti, Kari; Hänninen, Hannu1985 in SCANDINAVIAN JOURNAL OF METALLURGY (Wiley-Blackwell)ISSN: 0371-0459The effect of heat treatment on the microstructure and corrosion resistance of inconel X-750 alloy
Kekkonen, T.; Hänninen, Hannu1985 in Corrosion Science (Elsevier Limited)ISSN: 0010-938XINTERGRANULAR CORROSION TESTING OF NICKEL-BASE ALLOYS.
Kekkonen, T.; Aaltonen, P.; Hänninen, Hannu1985 in SCANDINAVIAN JOURNAL OF METALLURGY (Wiley-Blackwell)ISSN: 0371-0459Metallurgical effects on the corrosion resistance of a low temperature sensitized welded aisi type 304 stainless steel
Kekkonen, T.; Aaltonen, P.; Hänninen, Hannu1985 in Corrosion Science (Elsevier Limited)ISSN: 0010-938XCrystallography of hydrogen-induced surface cracking in a spherical austentic stainless steel single crystal
Tähtinen, S.; Kivilahti, J.; Hänninen, Hannu1985 in Scripta Metallurgica (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0036-9748Optimization of metallurgical variables in fracture prevention
Törrönen, Kari; Wallin, Kim; Saario, Timo; Hänninen, Hannu; Rintamaa, Rauno; Forstén, Jarl1985 in NUCLEAR ENGINEERING AND DESIGN (Elsevier Science)ISSN: 0029-5493Influence of nitrogen alloying on hydrogen embrittlement in AISI 304-type stainless steels
Hannula, Simo Pekka; Hänninen, Hannu; Tähtinen, Seppo1984 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 0360-2133ON THE STRUCTURE OF OXIDE LAYERS OF STAINLESS STEELS FORMED IN SIMULATED LIGHT WATER REACTOR CONDITIONS.
Jauhiainen, Eeva; Minni, Erkki; Hänninen, Hannu1984 in SCANDINAVIAN JOURNAL OF METALLURGY (Wiley-Blackwell)ISSN: 0371-0459The Effect of Sigma Phase Formation on the Corrosion and Mechanical Properties of Nb-Stabilized Stainless Steel Cladding
Klemetti, K.; Hänninen, Hannu; Kivilahti, J.1984 in WELDING JOURNAL (American Welding Society)ISSN: 0043-2296Electrochemical methods for testing the intergranular corrosion susceptibility of stainless steels
Aaltonen, P.; Aho-Mantila, I.; Hänninen, Hannu1983 in Corrosion Science (Elsevier Limited)ISSN: 0010-938XOn the mechanisms of environment sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Hänninen, Hannu; Törrönen, K.; Kemppainen, M.; Salonen, S.1983 in Corrosion Science (Elsevier Limited)ISSN: 0010-938XMICROPROCESSES IN STRESS-CORROSION CRACK INITIATION IN AUSTENITIC STAINLESS-STEELS
Hänninen, Hannu; Aho-Mantila, I.1982 in Metals technology (INST MATERIALS)ISSN: 0307-1693On grain boundary segregation in austenitic stainless steels
Hänninen, Hannu; Minni, Erkki1982 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 0360-2133Pipe failure caused by thermal loading in BWR water conditions
Hänninen, Hannu; Hakala, J.1981 in INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (ELSEVIER SCI LTD)ISSN: 0308-0161ON THE EFFECTS OF alpha prime MARTENSITE IN HYDROGEN EMBRITTLEMENT OF A CATHODICALLY CHARGED AlSl TYPE 304 AUSTENITIC STAINLESS STEEL.
Hänninen, Hannu; Hakarainen, Tero1980 in CORROSION (National Association of Corrosion Engineers)ISSN: 0010-9312Fractographic characteristics of a hydrogen-charged AISI 316 type austenitic stainless steel
Hänninen, Hannu; Hakkarainen, Tero1979 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 0360-2133Book section, Chapters in research booksTekniska barriärer
Forsling, W.; Hänninen, Hannu2008 Kapsel
Hänninen, Hannu2008 Dynamic Strain Ageing of Deformed Nitrogen-Alloyed AISI 316 Stainless Steels
Ehrnsten, Ulla; Toivonen, Aki; Ivanchenko, Mykola; Nevdacha, Vitali; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 ISBN: 978-1-84569-242-1ISSN: 1354-5116Stress Corrosion Cracking
Hänninen, Hannu2003 ISBN: 0-08-043749-4Properties of dissimilar joints between stainless steels and structural steels
Alenius, M.; Hänninen, H.1998 Toughness properties of martensitic/ferritic stainless steels
Lokka, M.; Vilpas, M.; Hänninen, H.1998 Redistribution of alloying elements in electron-irradiated iron-based FCC alloys studied by hydrogen-probe mechanical spectroscopy
Smuk, S.; Hänninen, Hannu; Jagodzinski, Y.; Tarasenko, O.1998 in MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS (MATERIALS RESEARCH SOCIETY)ISBN: 1-55899-446-7ISSN: 0272-9172Conference proceedingsHydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu2017 ISBN: 9780791861387Hydrogen uptake and embrittlement susceptibility of ferrite pearlite pipeline steels
Todoshchenko, Olga Madelen Ingrid; Yagodzinskyy, Yuriy; Hänninen, Hannu2017 ISBN: 9780791861387Hydrogen effects on strain localization in FCC metals at the initial stage of plastic deformation
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Hänninen, Hannu2017 ISBN: 9780791861387Fracture mechanical and microstructural characterization of narrow-gap safe-end dissimilar metal weld
Ahonen, Matias; Mouginot, Roman; Lindqvist, S.; Sarikka, Teemu; Nevasmaa, Pekka; Ehrnstén, Ulla; Hänninen, Hannu2016 in VTT Technology (Teknologian tutkimuskeskus VTT Oy)ISBN: 978-951-38-8436-9ISSN: 2242-122XImproved Understanding of Varestraint Testing—Nickel-Based Superalloys
Andersson, Joel; Jacobsson, Jonny; Brederholm, Anssi; Hänninen, Hannu2016 ISBN: 978-3-319-28432-3Short-range ordering of Alloy 690 aged for 10 000 h at 420, 475 and 550 °C
Mouginot, Roman; Sarikka, Teemu; Ehrnstén, Ulla; Kim, Y.S.; Kim, S.S.; Hänninen, Hannu2016 in VTT Technology (Teknologian tutkimuskeskus VTT Oy)ISBN: 978-951-38-8436-9ISSN: 2242-122XFactors Affecting Low Temperature Crack Propagation (LTCP) Susceptibility of Nickel-Based Alloy 182, 82, 152 and 52 Weld Metals
Ahonen, Matias; Ehrnstén, Ulla; Saukkonen, Tapio; Todoshchenko, Olga; Hänninen, Hannu2015 ISBN: 978-1-926773-19-3Effect of heat treatment and cold work on the ordering of alloy 690 at 475°C
Mouginot, Roman; Sarikka, Teemu; Heikkilä, Mikko; Ehrnstén, Ulla; Kim, Young Suk; Kim, Sung Soo; Hänninen, Hannu2015 ISBN: 978-1-926773-19-3Fatigue strength of welded extra high-strength and thin steel plates
Remes, H.; Peltonen, M.; Seppänen, T.; Kukkonen, A.; Liinalampi, S.; Lillemäe, I.; Lehto, P.; Hänninen, H.; Romanoff, J.; Nummela, S.2015 ISBN: 978-1-138-02789-3The effect of microstructure on Low-Temperature Crack Propagation (LTCP) susceptibility of nickel-based Alloy 182, 152 and 52 weld metals in PWR primary water
Ahonen, Matias; Ehrnstén, Ulla; Saukkonen, Tapio; Todoshchenko, Olga; Hänninen, Hannu2014 Effect of strain on hydrogen solubility and trapping in AISI 316L austenitic stainless steel
Ganchenkova, Maria; Yagodzinskyy, Yuriy; Hänninen, Hannu2014 Effect of second pass in 2-sided FSW of high-strength structural steel
Luumi, Lauri; Santos Vilaca da Silva, Pedro; Sato, Yutaka S.; Hänninen, Hannu; Kokawa, Hiroyuki2014 Hydrogen effect of tensile properties of EUROFER 97 and ODS-EUROFER steels at elevated temperatures
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Ganchenkova, Maria; Emelyanova, O.; Saukkonen, Tapio; Hänninen, Hannu2014 Characterization of a Ni-base NG-DMW weld of modern PWR
Mouginot, Roman; Sarikka, Teemu; Brederholm, Anssi; Saukkonen, Tapio; Hänninen, Hannu2014 Effect of strength mismatch on fracture mechanical behavior of NG-DMW
Sarikka, Teemu; Ahonen, Matias; Karjalainen-Roikonen, Päivi; Brederholm, Anssi; Mouginot, Roman; Saukkonen, Tapio; Nevasmaa, Pekka; Hänninen, Hannu2014 Hydrogen-induced delayed fracture of high-strength carbon steels
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Saukkonen, Tapio; Hänninen, Hannu2014 Hydrogen-induced Strain Localization at Meso-scale in Austenitic Stainless Steels
Yagodzinskyy, Yuriy; Hänninen, Hannu2014 Hydrogen-induced strain localization in austenitic stainless steels and possible origins of their hydrogen embrittlement
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Saukkonen, Tapio; Hänninen, Hannu2014 Role of non-metallic inclusions in hydrogen-induced fracture of high-strength carbon steels
Yagodzinskyy, Yuriy; Todoshchenko, Olga; Saukkonen, Tapio; Hänninen, Hannu2014 Ageing degradation of a hard-facing alloy after long-time exposure to BWR conditions
Aaltonen, Pertti; Ehrnstén, Ulla; Karjalainen-Roikonen, Päivi; Autio, Juha-Matti; Saukkonen, Tapio; Hänninen, Hannu2013 Low temperature crack propagation (LTCP) susceptibility of nickel-based weld metals alloy 182, 152 and 52 in PWR primary water
Ahonen, Matias; Ehrnsten, Ulla; Saukkonen, Tapio; Todoshchenko, Olga; Hänninen, Hannu2013 Hydrogen Solubility and Trapping in AISI 316L Austenitic Stainless Steel
Ganchenkova, Maria; Todoshchenko, Olga; Yagodzinskyy, Yuriy; Hänninen, Hannu2013 Effect of strength mismatch and microstructure on mechanical properties of BWR dissimilar metal safe-end weld
Holmström, Petra; Sarikka, Teemu; Brederholm, Anssi; Karjalainen-Roikonen, Päivi; Saukkonen, Tapio; Toivonen, Aki; Nevasmaa, Pekka; Hänninen, Hannu2013 Hydrogen-induced Cracking of Oxygen-free Phosphorous-doped Copper
Hänninen, Hannu; Malitckii, Evgenii; Saukkonen, Tapio; Yagodzinskyy, Yuriy2013 Application of alloy 690 and associated weld metals in PWRs
Hänninen, Hannu2013 Hydrogen solubility and diffusion and its effects on plastic deformation in austenitic stainless steels
Hänninen, Hannu2013 Hydrogen uptake and its effect on tensile properties of Eurofer 97-2 and ODS-Eurofer steels
Malitckii, E.; Yagodzinskyy, Y.; Ganchenkova, M.; Saukkonen, T.; Hänninen, H.; Lindau, R.; Vladimirov, P.; Moeslang, A.2013 Fracture mechanical characterisation of ferrite-austenite dissimilar metal welds (DMWs) for elevated temperature service in view of metallurgical mis-match
Nevasmaa, Pekka; Holmström, Petra; Karjalainen-Roikonen, Päivi; Sarikka, Teemu; Ahonen, Matias; Mouginot, Roman; Ehrnsten, Ulla; Brederholm, Anssi; Aaltonen, Pertti; Hänninen, Hannu2013 Corrosion resistance of Kanthal A-1 and Fe-12Cr-2Si alloy coatings in Cl-containing environment
Sarikka, Teemu; Ilola, Risto; Pohja, Rami; Hänninen, Hannu2013 Intermartensite transformation in Ni50Mn25+xGa25-x alloys and its effect on twinning stress
Straka, Ladislav; Heczko, Oleg; Sozinov, Alexei; Hänninen, Hannu2013 ISBN: 978-966-491-465-6Hydrogen Solubility and Diffusion in Metastable Austenitic Stainless Steels Studied with Thermal Desorption Spectroscopy
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Papula, Suvi; Hänninen, Hannu2013 Effect of Alloy Composition and Temperature on Corrosion Behavior of Stainless Steels in Hot Alkaline Solutions
Vepsäläinen, M.; Pohjanne, P.; Romu, J.; Saukkonen, T.; Hänninen, H.; Heikkilä, M.; Ohligschläger, T.; Berg, C-G.; Pulliainen, M.2013 Influence of secondary flash formation on friction surfacing of high-strength steel substrate with AISI 316 consumable
Vilaça, Pedro; Hänninen, Hannu; Saukkonen, Tapio; Miranda, Rosa M.2013 Hydrogen Effects on Plastic Deformation of AISI 316LN Single Crystals
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Saukkonen, Tapio; Hänninen, Hannu2013 Forced torsion pendulum for studies of interactions at solid-liquid interface
Yagodzinskyy, Yuriy; Straka, Ladislav; Hänninen, Hannu2013 ISBN: 978-966-491-465-6Improved Varestraint Testing by Modification of Sample Geometry
Andersson, J.; Jacobsson, J.; Sjöberg, G.; Brederholm, Anssi; Hänninen, Hannu2012 Stress Corrosion Cracking and Crack Tip Characterization of Alloy X-750 in Boiling Water Reactor Environments
Gibbs, Jonathan; Ballinger, Ronald; Jackson, John; Isheim, Dieter; Hänninen, Hannu2012 ISBN: 9781118132418Effect of Hot Cracks on EAC Crack Initiation and Growth in Nickel-base Alloy Weld Metals
Hänninen, Hannu; Toivonen, Aki; Brederholm, Anssi; Saukkonen, Tapio; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2012 ISBN: 9781118132418Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Sulfide Containing Alkaline Solutions
Leinonen, Heikki; Pohjanne, Pekka; Romu, Jyrki; Saukkonen, Tapio; Schildt, Tanja; Hänninen, Hannu2012 Effect of Alloy Composition on Stress Corrosion Cracking Susceptibility of Duplex Stainless Steels in Hot Alkaline Sulfide Solution
Leinonen, Heikki; Pohjanne, Pekka; Chasse, Kevin; Singh, Preet; Romu, Jyrki; Saukkonen, Tapio; Hänninen, Hannu2012 Effect of Thermal Aging on SCC, Material Properties and Fracture Toughness of Stainless Steel Weld Metals
Lucas, Timothy; Ballinger, Ronald; Hänninen, Hannu; Saukkonen, Tapio2012 ISBN: 9781118132418New Generation Ferritic and Duplex Stainless Steels: Preliminary Study on Mechanical and In-Service Properties of Base Materials and Welded Joints
Nevasmaa, Pekka; Sirén, Mika; Karjalainen-Roikonen, Päivi; Hirn, Justus; Romu, Jyrki; Hänninen, Hannu; Sieppi, Ville; Heikkinen, Hannu-Pekka; Manninen, Timo; Säynäjäkangas, Jukka2012 Plastic Strain and Residual Stress Distributions in AISI 304 Stainless Steel Power Plant Pipe Welds
Saukkonen, Tapio; Aalto, Miikka; Virkkunen, Iikka; Ehrnsten, Ulla; Hänninen, Hannu2012 ISBN: 978-1-118-13241-8Role of Excessive Vacancy Generated in p-n Type Duplex Cu2O Film under Anodic Bias in TGSCC of Pure Copper
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Kilpeläinen, Simo; Tuomisto, Filip; Hänninen, Hannu2011 Metallurgical Response of Electron Beam Welded Allvac® 718Plus™
Andersson, Joel; Sjöberg, Göran; Hänninen, Hannu2011 ISBN: 978-3-642-16863-5Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnstén, Ulla; Aaltonen, Pertti2011 Effect of Selective Dissolution on Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions
Leinonen, Heikki; Pohjanne, Pekka; Saukkonen, Tapio; Schildt, Tanja; Romu, Jyrki; Hänninen, Hannu2011 Effect of Sodium Sulphide Addition on Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions
Romu, Jyrki; Saukkonen, Tapio; Schildt, Tanja; Hänninen, Hannu; Leinonen, Heikki; Pohjanne, Pekka2011 Plastic strain and residual stress distributions in an AISI 304 stainless steel BWR pipe weld
Saukkonen, Tapio; Aalto, Miikka; Virkkunen, Iikka; Ehrnstén, Ulla; Hänninen, Hannu2011 ISBN: 9781118132418Ni-Mn-Ga single crystals with very low twinning stress
Straka, Ladislav; Hänninen, Hannu; Soroka, Aleksandr; Sozinov, Alexei2011 in Journal of Physics: Conference Series (IOP PUBLISHING LTD)ISSN: 1742-6588Evaluation of Post-Weld Heat Treatment as a Method to Prevent Stress Corrosion Cracking of Carbon Steel in Ethanol by Notched Constant Tensile Load Testing
Torkkeli, Janne; Hirsi, Kalle Valtteri; Saukkonen, Tapio; Hänninen, Hannu2011 Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption and Mechanical Loss Spectroscopy
Yagodzinskyy, Yuriy; Todoshchenko, Olga; Ivanchenko, Mykola; Papula, Suvi; Hänninen, Hannu2011 ISBN: 9789081794206Environment-Assisted Cracking and Hot Cracking of Ni-Base Alloy Dissimilar Metal Welds
Aaltonen, Pertti; Hänninen, Hannu; Brederholm, Anssi; Toivonen, Aki; Ehrnstén, Ulla2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Low Temperature Crack Propagation of Nickel-based Weld Metals in Hydrogenerated PWR Primary Water
Ahonen, Matias; Ehrnstén, Ulla; Hänninen, Hannu2010 Effect of Hydrogenated Low Temperature Water on Fracture Toughness of Nickel-Based Weld Metals
Ahonen, Matias; Ehrnstén, Ulla; Hänninen, Hannu2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Thermoplastic Wire Drawing from Bulk Metallic Glass
Bossuyt, Sven; Soinila, Erno; Penttinen, Henri; Pulkki, Ville; Hänninen, Hannu2010 Development of Materials for Nuclear Power Plants
Hänninen, Hannu2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel
Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Hydrogen solubility and diffusion in austenitic and duplex stainless steels studied with thermal desorption spectroscopy
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Hänninen, Hannu2010 Deformation Localisation and EAC Inhomogenous Microstructures of Austenitic Stainless Steels
Ehrnstén, Ulla; Saukkonen, Tapio; Hänninen, Hannu2009 EAC Crack Initiation in Nickel-Based Dissimilar Metal Welds Using Doped Steam Test
Hänninen, Hannu; Toivonen, Aki; Saukkonen, Tapio; Brederholm, Anssi; Aaltonen, Pertti; Ehrnstén, Ulla2009 Dynamic Strain Aging of NI-Base Weld Metals in Comparison to Alloy 600 and 690
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Ehrnstén, Ulla; Hänninen, Hannu2009 Optical Strain Measurement of Plastic Strain Localization in Nuclear Waste Copper Canisters
Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2009 Bulk metallic glass coating of polymer substrates
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2009 in Journal of Physics: Conference Series (IOP PUBLISHING LTD)ISSN: 1742-6588Solidification Cracking of Alloy Allvac 718Plus and Alloy 718 at Transvarestraint Testing
Andersson, Joel; Sjöberg, G.; Brederholm, Anssi; Hänninen, Hannu2008 in EPD Congress (MINERALS, METALS & MATERIALS SOCIETY)ISBN: 978-0-87339-715-5ISSN: 1079-7580Hot Cracking of Allvac 718Plus, Alloy 718 and Waspaloy at Varestraint Testing
Andersson, Joel; Sjöberg, G.; Viskari, L.; Brederholm, Anssi; Hänninen, Hannu; Knee, Christopher S.2008 Trends in Forming and Welding of Stainless Steels
Hänninen, Hannu; Romu, Jyrki2008 ISBN: 91-974131-9-4Hot Cracking Susceptibility of Inconel Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio2008 Hot cracking susceptibility of ni-base alloy dissimilar metal welds
Hänninen, Hannu; Brederholm, A.; Saukkonen, T.2008 ISBN: 9783540786276Photocatalytic Activity of Atomic Layer Deposited (ALD) TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys
Ilola, R.; Kawakami, H.; Straka, L.; Papula, S.; Romu, J.; Hänninen, Hannu; Mahlberg, R.; Heikkilä, M.2008 Microstructure and Plastic Strain Distribution of an AISI 304 Stainless Steel Power Plant Pipe Weld Studied by EBSD
Saukkonen, Tapio; Ehrnstén, Ulla; Hänninen, Hannu2008 Microstructure and Texture Analysis of Friction Stir Welds of Copper
Saukkonen, Tapio; Savolainen, Kati; Mononen, Jukka; Hänninen, Hannu2008 in Ceramic Transactions (The American Ceramic Society)ISBN: 9780470408346ISSN: 1042-1122EBSD Lessons from Various Plastic Strain Mapping Cases
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2008 Entrapped Oxide Particles in Copper Friction Stir Welds
Savolainen, Kati; Saukkonen, Tapio; Mononen, Jukka; Hänninen, Hannu2008 ISBN: 978-903761-06-9Static Strain Ageing of Metastable Austenitic Stainless Steel
Talonen, Juho; Hänninen, Hannu2008 ISBN: 91-974131-9-4Effect of Hydrogen on Plastic Strain Localization in Single Crystals of Nickel and Austenitic Stainless Steel
Yagodzinskyy, Yuriy; Saukkonen, T.; Tuomisto, Filip; Barannikova, Svetlana; Zuev, Lev; Hänninen, Hannu2008 ISBN: 978-1-61503-003-3Hydrogen-induced Cracking of Metastable Austenitic Stainless and High-Strength Carbon Steels
Yagodzinskyy, Yuriy; Saukkonen, T.; Andronova, E. ; Rissanen, L.; Hänninen, Hannu2008 ISBN: 978-1-61503-003-3Environment-Assisted Cracking and Hot Cracking of Ni-base Alloy Dissimilar Metal Welds
Hänninen, Hannu; Toivonen, Aki; Brederholm, Anssi; Saukkonen, Tapio; Ehrnstén, Ulla; Aaltonen, Pertti2007 Characterization of Solute Redistribution and Microstructural Development in Ni-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio2007 Environmentally Assisted Cracking of Cold-worked Stainless Steels Mechanistic Point of Wiew
Hänninen, Hannu; Ehrnstén, Ulla; Talonen, Juho2007 Structural Damage of Aluminum Alloy 6082 Determined by Nonlinear Elastic Wave Modulation Spectroscopy
Straka, Ladislav; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 ISBN: 84-87985-12-2Effects of Straining on Oxide Films and Passivity of Copper in Nitrite Solution at Ambient Temperature
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 ISBN: 0-444-52224-7Dynamic Strain Ageing and EAC of Deformed Nitrogen-alloyed AISI 316 Stainless Steels
Ehrnstén, Ulla; Ivanchenko, Mykola; Nevdacha, Vitaly; Yagodzinskyy, Yuriy; Toivonen, Aki; Hänninen, Hannu2006 Dynamic Strain Aging of Ni-base Alloys Inconel 600 and 690
Hänninen, Hannu; Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Nevdacha, Vitaly; Ehrnstén, Ulla; Aaltonen, Pertti2006 FSW of PH 15-7 Stainless Steel Sheet
Mononen, Jukka; Hänninen, Hannu2006 A Preliminary Study on Friction Stir Welding of Dissimilar Metal Joints of Copper and Aluminium
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu2006 Effect of Temperature on Tensile Behaviour and Microstructural Evolution of Nitrogen Alloyed Austenitic Stainless Steel
Talonen, Juho; Taulavuori, Tero; Hänninen, Hannu2006 ISBN: 7-5024-4079-8Electrochemical Potential Oscillations During Galvanostatic Passivation of Copper in NaNO2 Solution and their Role in TGSCC Mechanism
Yagodzinskyy, Yuriy; Aaltonen, Pertti; Hänninen, Hannu2006 ISBN: 0-444-52224-7Comparative Study of Nitrogen and Carbon Effects on Mechanism of Reversion of a´ Martensite to Austenite in Metastable AISI 301 Steel Grades
Yagodzinskyy, Yuriy; Saukkonen, Tapio; Romu, Jyrki; Hänninen, Hannu2006 ISBN: 7-5024-4079-8Effect of Forming Temperature and Cooling Rate on Superplastic Formability and Corrosion Resistance of EN 1.4162 Duplex Stainless Steel
Romu, Jyrki; Yagodzinskyy, Yuriy; Papula, Suvi; Beck, W.; Hänninen, Hannu2005 Mechanical and Electrical Properties of CNT/copper Nanocomposites Processed by Hot Pressing
Yagodzinskyy, Yuriy; Romu, Jyrki; Hänninen, Hannu2005 Hydrogen-Dislocation Interactions and their Role in HELP Mechanism of Hydrogen Embrittlement
Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Surface Contamination on Stainless Steel in Paper Machine Environment
Carpén, L.; Papula, Suvi; Leino, T.; Pohjanne, Pekka; Stenius, P.; Hänninen, Hannu2004 Application and Performance of High Nirogen Steels
Hänninen, Hannu2004 Kopparkapslar ?Tillverkning, Förslutsning, Beständighet
Hänninen, Hannu2004 Dynamic Strain Ageing of Nitrogen-alloyed AISI 316L Stainless Steel
Ivanchenko, Mykola; Ehrnstén, Ulla; Nevadacha, Vitaly; Yagodzinskyy, Yuriy; Hänninen, Hannu2004 Hitsaamon pienhiukkaset
Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2004 Determination of Fine Particles in Welding Fumes
Kasurinen, Heikki; Hänninen, Hannu; Koskinen, A.; Hämeri, K.; Lähde, T.; Ukkonen, A.2004 Advanced Flaw Manufacturing and Crack Growth Control
Kemppainen, M.; Pitkänen, J.; Virkkunen, Iikka; Hänninen, Hannu2004 ISBN: 0-7354-0173-XSuperplastic Forming of LDX 2101 (EN 1.4162) Duplex Stainless Steel
Romu, Jyrki; Yagodzinskyy, Yuriy; Beck, W.; Hänninen, Hannu2004 Design of the Grain Structure in Copper by Friction Stir Processing
Saukkonen, Tapio; Savolainen, Kati; Mononen, Jukka; Hänninen, Hannu2004 Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2004 Static Strain Aging of Cold-worked Austenitic Stainless Steel
Talonen, Juho; Nenonen, Pertti; Hänninen, Hannu2004 Effect of Thermal Stresses along Crack Surface on Ultrasonic Response
Virkkunen, Iikka; Kemppainen, Mika; Pitkänen, Jorma; Hänninen, Hannu2004 ISBN: 0-7354-0173-XNitrogen and Carbon Effects on Mechanisms of Reversion of Martensite to Austenite in Metastable AISI 301 Steel Grades and Their Hot Formability
Yagodzinskyy, Yuriy; Romu, Jyrki; Nenonen, Pertti; Hänninen, Hannu2004 Vacancy Generation in Electrochemical Oxidation/Dissolution of Copper in NaNo2 Solution and its Role in SCC Mechanism
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Tarasenko, O.; Hänninen, Hannu2003 ISBN: 0-87339-501-8Vacancy generation in electrochemical oxidation / dissolution of copper in NaNO2 solutions and its role in SCC mechanism
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Tarasenko, Oleksandr; Hänninen, Hannu2003 Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Hänninen, Hannu2003 Summary of Recent Research on N-alloying of Steels in Finland
Hänninen, Hannu; Talonen, Juho; Romu, Jyrki; Leinonen, Heikki; Laitinen, Arttu; Korhonen, Mika2003 Hydrogen Interactions with 2.25Cr and 9Cr Steels
Hänninen, Hannu; Yagodzinskyy, Yuriy; Tarasenko, O.; Castello, P.; Schosger, J.-P.2003 ISBN: 0-87339-501-8Role of Dynamic Strain Aging in Environment Sensitive Cracking of Low Alloy and Stainless Steels in LWRs
Hänninen, Hannu2003 Effects of dynamic strain aging on environment-assisted cracking of low alloy pressure vessel and piping steels
Hänninen, Hannu; Seifert, Hans Peter; Yagodzinskyy, Yuriy; Ehrnstén, Ulla; Tarasenko, O.; Aaltonen, Pertti2003 in VTT Symposia (VTT)ISBN: 951-38-6280-1ISSN: 0357-9387Main Working Principles of Nuclear Reactors: Materials Science.
Hänninen, Hannu2003 Production of Realistic Flaw in Inconel 600
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Hukkanen, Kari; Hänninen, Hannu2003 Stress corrosion cracking and life prediction of austenitic stainless steels in calcium chloride solution
Leinonen, H.; Virkkunen, I.; Hänninen, Hannu2003 ISBN: 0873395018Experimental Investigations Concearning the Possible Effect of Dynamic Strain Aging on Environmentally-Assisted Cracking of Low Alloy Steels in Oxygenated High-Temperature Water
Roth, Armin; Hänninen, Hannu; Brümmer, Günther; Wachter, Otto; Ilg, Ulf; Widera, Martin; Hoffman, Harald2003 Investigation of Dynamic Strain Aging Effects of Low Alloy Steels and their Possible Relevance for Environmentally-Assisted Cracking in Oxygenated High-Temperature Water
Roth, Armin; Hänninen, Hannu; Brümmer, Günther; Wachter, Otto; Ilg, Ulf; Widera, Martin; Hoffman, Harald2003 Effect of Strain and Strain Rate on the Electric Properties of the Oxide Film Growing on an Austenitic Stainless Steel in Simulated BWR Conditions
Takeda, Yoichi; Bojinov, Martin; Hänninen, Hannu; Kinnunen, Petri; Laitinen, Timo; Mäkelä, Kari; Saario, Timo; Sakaguchi, K.; Shoji, T.; Sirkiä, Pekka; Toivonen, Aki2003 Effect of Strain on Electric Properties of Oxide Films Growing on AISI 316L Steel in Simulated BWR Conditions
Takeda, Yoichi; Bojinov, Martin; Hänninen, Hannu; Kinnunen, Petri; Laitinen, Timo; Mäkelä, Kari; Saario, Timo; Sakaguchi, K.; Shoji, T.; Sirkiä, Pekka; Toivonen, Aki2003 The Effect of Plastic Deformation on Damping Properties of Austenitic Stainless Steels
Talonen, Juho; Hänninen, Hannu2003 Thermal Fatigue In NDE Artificial Flaw Manufacturing for LWR Applications
Virkkunen, Iikka; Kemppainen, Mika; Hänninen, Hannu2003 Effect of Hydrogen on Plastic Deformation of Stable 18Cr-16Ni-10Mn Austenitic Stainless Steel Single Crystals
Yagodzinskyy, Yuriy; Tarasenko, O.; Hänninen, Hannu2003 ISBN: 0-87339-501-8Interactions of Hydrogen in Copper Studied by Internal Friction Method
Aaltonen, Pertti; Nevdacha, Vitaliy; Tarasenko, O.; Yagodzinskyy, Youri; Hänninen, Hannu2002 Dwell time effects on fatigue life and damage mechanisms
Goswami, Tarun; Krohn, J.; Hänninen, Hannu2002 Ydinvoimalaitosten painelaitteiden, putkistojen ja höyrynkehittimien rakenteet ja materiaalit
Hänninen, Hannu2002 Realistic Cracks for In-Service Inspection Qualification Mock-ups
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Paussu, Rami; Hänninen, Hannu2002 Hydrogen Mechanical Spectroscopy Study of Atomic Ordering in Inconel 939 Alloy
Kemppainen, Mika; Nevdacha, Vitaliy; Yagodzinskyy, Yurii; Hänninen, Hannu2002 Stress Corrosion Cracing and Life Prediction of Austenitic Stainless Steels in Calcium Chloride Solution
Leinonen, Heikki; Virkkunen, Iikka; Hänninen, Hannu2002 Cost comparison of FSW and MIG welded aluminium panels
Mononen, Jukka; Hänninen, Hannu2002 Superplasticity and Superplastic Forming in Finland - Recent Advancements and Future Prospects
Pimenoff, Joe; Romu, Jyrki; Yagodzinskyy, Yuouri; Hänninen, Hannu2002 Thermal Fatigue and NDE Qualification Applications
Virkkunen, Iikka; Kemppainen, Mika; Hänninen, Hannu2002 Intergranular Cracking of AISI 316NG Stainless Steel in BWR Environment
Ehrnsten, Ulla; Aaltonen, Pertti; Nenonen, Pertti; Hänninen, Hannu; Jansson, Christer; Angeliu, Thomas2001 Cracking of recovery boiler composite tubes - thermal fatigue or stress corrosion cracking ?
Hänninen, Hannu; Pohjanne, Petri; Saarinen, Pekka; Kiesi, T.2001 Effects of Dynamic Strain Aging on Environment-Assisted Cracking of Low Alloy Pressure Vessel and Piping Steels
Hänninen, Hannu; Yagodzinskyy, Youri; Tarasenko, O.; Seifert, Hans-Peter; Ehrnsten, Ulla; Aaltonen, Pertti2001 Modelling of material ageing
Jagodzinski, Yu.; Hänninen, Hannu2001 in VTT SYMPOSIA (VTT)ISBN: 951-38-5727-1ISSN: 0357-9387New HIPed Powder Metallurgy Super Duplex Stainless Steel Suction Roll Shells with Excellent Corrosion and Fatigue Properties for Paper Machine Applications
Korhonen, Mika; Hänninen, Hannu; Laitinen, Arttu; Hämäläinen, E.; Heikkinen, J.; Liimatainen, J.2001 Superplastic Forming of Commercial Grade Aluminium and Stainless Steel Sandwich Panels
Pimenoff, Joe; Yagodzinskyy, Youri; Romu, Jyrki; Hänninen, Hannu2001 Commercial Grade Aluminium and Stainless Steel Sandwich Panels - Preparation, Superplastic Forming and Post-Formed Properties
Pimenoff, Joe; Yagodzinskyy, Youri; Romu, Joe; Hänninen, Hannu2001 Advanced Composite Tube Materials for Lower Furnace in Black Liquor Recovery Boilers
Pohjanne, Petri; Saarinen, Pekka; Mäkipää, M.; Oksa, M.; Hänninen, Hannu2001 Effects of secondary phase precipitation on corrosion properties of duplex stainless steels
Smuk, Sergiy; Nenonen, P.; Hänninen, Hannu2001 Load Sharing in Duplex Stainless Steels Determined by Barkhausen Noise
Virkkunen, Iikka; Gripenberg, Hans; Hänninen, Hannu; Vilpas, Martti2001 Mechanical Properties of Austenitic High Nitrogen Steels at Elevated Temperatures
Ilola, R.; Kemppainen, M.; Hänninen, Hannu2000 ISBN: 0-08-042815-0Manufacturing aluminium sandwich structures by means of superplastic forming
Impiö, P.; Pimenoff, J.; Hänninen, Hannu; Heinäkari, M.2000 in MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS (MATERIALS RESEARCH SOCIETY)ISBN: 1-55899-509-9ISSN: 0272-9172Fatigue Behaviour of Calcium-treated and Non-Calcium-Treated AlSl 8620 Carburizing Steel
Juvonen, P.; Hänninen, Hannu2000 Fatigue behaviour of calcium-treated and non-calcium-treated AISI 8620 carburizing steel
Juvonen, P.; Hänninen, Hannu2000 ISBN: 0-08-042815-0A Powder-Metallurgy Approach to Fabricating a Nitrogen-Gradient Structure for Multi-Material Biomedical Implants
Karlsen, W.; Hänninen, Hannu2000 Narrow Gap GTA Welding of P/M Super Duplex Stainless Steels
Korhonen, M.; Luukas, M.; Hänninen, Hannu2000 Narrow Gap GTA Welding of P/M Super Duplex Stainless Steels
Korhonen, M.; Luukas, M.; Hänninen, Hannu; Liimatainen, J.2000 Carbide Containing Metal Matrix Composite Coatings Produced by PTAW Method
Luukas, M.; Hänninen, Hannu2000 Fatigue Strength of Plasma Arc-, Tandem MiG- and Friction Stir Butt Welds in 5083 and 6082 Aluminium Alloys
Mononen, J.; Hänninen, Hannu; Haagensen, P.J.2000 Drilling and tapping of hard tempered steels
Paro, J.; Hänninen, Hannu; Kauppinen, V.2000 Drilling of hiped P/M and conventional duplex stainless steels
Paro, JA; Hänninen, Hannu; Kauppinen, VA2000 ISBN: 9985894219Tool wear and machinability of hipped P/M and conventional duplex stainless steels
Paro, Jukka; Hänninen, Hannu; Kauppinen, V.2000 Tool wear and machinability of hipped P/M and conventional cast duplex stainless steels
Paro, J.; Hänninen, Hannu; Kauppinen, V.2000 in VTT SYMPOSIA (VTT)ISBN: 951-38-5278-4ISSN: 0357-9387Thermal Fatigue of New Composite Tube Materials
Saarinen, Pekka; Hänninen, Hannu; Nenonen, P.2000 ISBN: 0-89852-971-9The Inner and Outer Surface Cracking of the Recovery Boiler Floor Tubes
Saarinen, P.; Hänninen, Hannu; Tuiremo, J.; Salmi, K.2000 ISBN: 0-89852-971-9Study of the Mechanisms of the Secondary Phase Precipitation in P/M-HIP Super Stainless Steels
Smuk, S.; Smuk, O.; Nenonen, P.; Hänninen, Hannu2000 Internal Friction Study of Phase Transformations and Hydrogen Effects in Super duplex stainless Steels
Smuk, O.; Hänninen, Hannu; Yagodzinskyy, Yu.; Tarasenko, O.; Smuk, S.2000 ISBN: 0-08-042815-0Effects of Copper on Precipitation of Secondary Phases in Duplex Stainless Steels
Smuk, O.; Nenonen, P.; Hänninen, Hannu; Liimatainen, J.2000 ISBN: 0-08-042815-0Thermal Fatigue of Duplex Stainless Steels
Virkkunen, I.; Hänninen, Hannu2000 Study of Hydrogen Diffusion in P/M-HIP SAF 2507 Super Duplex Stainless Steel by the Internal Friction Method
Yagodzinskyy, Yu.; Smuk, O.; Tarasenko, O; Smuk, S.; Hänninen, Hannu2000 Effect of Recrystallisation Annealing on Grain Refinement for Superplastic Forming of Cold Rolled AA 5083 Aluminium Base Alloy
Yagodzinskyy, J.; Pimenoff, J.; Romu, J.; Tarasenko, O.; Hänninen, Hannu2000 Laser beam welded stainless steel sandwich panels
Alenius, M.; Vilpas, M.; Hänninen, H.1999 Mikä on vaurio, milloin tarvitaan vaurioanalyysiä
Hänninen, H.1999 Corrosion properties of HNS
Hänninen, H.1999 Materiaalien ominaisuudet
Hänninen, H.1999 Dynamic Strain Ageing of Austenitic High Nitrogen Cr-Mn Steels
Ilalo, R.; Kemppainen, M.; Hänninen, H.1999 Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steels studied by means of internal friction
Jagodzinski, Yu.; Smuk, S.; Tarasenko, A.; Hänninen, H.1999 Interaction of nitrogen with diislocations studied by means of amplitude-dependent internal friction
Jagodzinski, Yu.; Tarasenko, A.; Smuk, S.; Hänninen, H.1999 Norrow gap GTA welding of stainless steels
Korhonen, M.; Luukas, M.; Hänninen, H.1999 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCl_2 solution
Leinonen, H.; Hänninen, H.1999 Tool wear and machinability of X5 CrMnN 18 18 stainless steels
Paro, Jukka; Hänninen, H.; Kauppinen, V.1999 Comparison of hydrogen effects on alloy 600 and 690
Smuk, S.; Hänninen, Hannu; Jagodzinski, Yu; Tarasenko, O.; Aaltonen, P.1999 ISBN: 0873394755Redistribution of Alloying Elements in Electron-Irradiated Iron-Based FCC Alloys Studied by Hydrogen-Probe Mechanical Spectrosscopy
Smuk, S.; Hänninen, H.; Jagodzinski, Y.; Tarasenko, O.1999 Fracture toughness and internal friction of GlidCop®Al-25 alloy
Tähtinen, S.; Pyykkönen, M.; Smuk, S.; Hänninen, Hannu; Jagodzinski, Y.; Tarasenko, O.1999 in MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS (MATERIALS RESEARCH SOCIETY)ISBN: 1-55899-446-7ISSN: 0272-9172Fracture Toughness and Internal Friction of CuAL25 Alloy
Tähtinen, S.; Pyykkönen, M.; Smuk, S.; Hänninen, H.; Jagodzinski, Y.; Tarasenko, O.1999 The role of nitrogen improving pitting corrosion resistance of high-alloy austenitic stainless steel welds
Vilpas, M.; Hänninen, H.1999 Thermal fatigue crack growth in austenitic stainless steels
Virkkunen, Iikka; Kemppainen, M; Hänninen, Hannu1999 ISBN: 7-04-007582-2Modelling of environmentally assisted cracking
Aaltonen, P.; Saario, T.; Hänninen, H.; Piippo, J.; Ehrnsten, U.; Itäaho, M.1998 Corrosion properties of HNS
Hänninen, H.1998 Dynamic Stain Ageing of Austenitic High Nitrogen Cr-Ni and Cr-Mn Steels
Ilola, R.; Kemppainen, M.; Hänninen, H.1998 Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steel studied by means of internal friction
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Nominal stress range of stainless steels fillet welds
Lahti, K.; Niemi, E.; Hänninen, H.1998 Nominal stress range fatigue of stainless steel fillet welds
Lahti, KE; Niemi, E; Hänninen, Hannu1998 ISBN: 90-5809-001-9Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
Romu, Jyrki; Hänninen, H.1998 The role of nitrogen in improving pitting corrosion resistance of high-alloy austenitic stainless steel welds
Vilpas, M.; Hänninen, H.1998 Influence of hydrogen changing on mechanical behaviour of Inconel-600 alloy measured by internal friction
Aaltonen, P.; Jagodinski, Y.; Tarasenko, A.; Smouk, S.; Hänninen, H.1997 Influence of hydrogen charging on mechanical behaviour of Inconel-600 alloy measured by internal friction
Aaltonen, P; Jagodzinski, Y; Tarasenko, A; Smouk, S; Hänninen, Hannu1997 ISBN: 0-89448-626-8Hydrogen interaction with dislocations in austenitic AISI 310 stainless steel
Amouk, S.; Hänninen, H.; Tarasenko, A.1997 Environmentally Assisted Cracking of Alloy 600 in PWR Primary Water
Ehrnsten, U.; Lagerström, J.; Saario, T.; Piippo, J.; Aaltonen, P.; Tähtinen, S.; Laitinen, T.; Hänninen, H.1997 Corrosion properties of HIPed P/M duplex stainless steels
Hämäläinen, E.; Korhonen, M.; Hänninen, H.; Liimatainen, J.1997 Combound teräkset
Hänninen, H.1997 Stress corrosion cracking, corrosion fatigue, irradiation assisted stress corrosion cracking and irradiation embrittlement
Hänninen, H.1997 Ferriittisten niukkahiilisten 12 % kromiterästen hitsaus ja liitosten mekaaniset ominaisuudet
Hänninen, H.1997 Projektin "Ruostumattomien terästen käyttö kuljetusvälineissä" esittely
Hänninen, H.1997 Model for environmentally assisted cracking of alloy 600 in PWR primary water
Lagerstrom, J; Ehrnsten, U; Saario, T; Hänninen, Hannu1997 ISBN: 0-89448-626-8The use of stainless steels in welded vehicle structures
Lahti, K.; Vilpas, M.; Kyröläinen, A.; Hänninen, H.1997 Prediction of stress corrosion cracking susceptibility of stainless steels in 50 % CaCl2 solution
Leinonen, H.; Hänninen, H.1997 Prediction of stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50 % CaCl2 solution
Leinonen, H.; Saario, T.; Hänninen, H.1997 Drilling of P/M produced stainless steels by using TiN-coated high speed steel tools.
Paro, J.; Hänninen, H.; Kauppinen, V.1997 Corrosion and mechanical properties of nitrogen alloyed P/M HIP austentic stainless steels
Romu, J.; Tervo, J.; Hänninen, H.1997 Slow strain rate testing of corrosion resistant alloys in high temperature H_(2)S environments
Saarinen, K.; Hämäläinen, E.; Hänninen, H.1997 SSC resistance oh HIPed P/M super duplex stainless steels in sour H_(2)S environments
Saarinen, K.; Hänninen, H.; Hämäläinen, E.; Liimatainen, J.1997 Properties of P/M High Nitrogen Austenitic and Duplex Stainless Steels
Tervo, J.; Romu, J.; Hämäläinen, E.; Hänninen, H.; Liimatainen, J.1997 Properties of Fe-Al-Si- High-Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1996 Properties of Fe-Al-Si high-damping steel
Aaltio, Ilkka; Ullakko, Kari; Hänninen, Hannu1996 ISBN: 0819420956Vacancy-Creep Model for EAC of Metallic Materials in High Temperature Water
Aaltonen, P.; Saario, T.; Karjalainen-Roikonen, P.; Piippo, J.; Tähtinen, S.; Itäaho, M.; Hänninen, H.1996 Selective Dissolution - Vacancy - Creep Model For EAC of Brass
Aaltonen, P.; Saario, T.; Ehrnstén, U.; Itäaho, M.; Hänninen, H.1996 Mechanical Properties of Cold-Rolled AISI 304LN Steel at Low Temperatures
Ilola, R.; Hänninen, H.; Heinäkari, M.1996 Properties of Submerged Arc Welded TMCP-steel Weldments
Kotamies, J.; Brederholm, A.; Hänninen, H.1996 Stainless Steel in a Bus Frame
Lahti, K.; Vilpas, M.; Kyröläinen, A.; Lokka, M.; Hänninen, H.1996 Corrosion Resistance of Stainless Steel Welds in Vehicle Applications
Lahti, K.; Vilpas, M.; Kyröläinen, A.; Hänninen, H.1996 Prediction of Stress Corrosion Cracing Susceptibility of Austenitic Stainless Steels in 50 % CaCl2 Solution
Leinonen, H.; Hänninen, H.1996 Hydrogen Interaction with Dislocations in Austenitic AISI 310 Stainless Steels
Smouk, S.; Hänninen, H.; Tarassenko, A.1996 Welding of Low-carbon 12 % Cr Stainless Steels with Austenitic Consumables - Fracture Toughness and Fatigue of Welded Joints
Vilpas, m.; Lokka, M.; Planman, t.; Lahti, K.; Hänninen, H.1996 Fracture Toughness and Fatigue Properties of Welded Stainless Steels used in Transport Vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Kyröläinen, A.; Hänninen, H.1996 Welding and properties of welds of TMCP-Steel
Brederholm, Anssi; Kotamies, J.M.N.; Hänninen, Hannu1995 ISBN: 0-87170-555-9Internal Friction in Hydrogen-Charged CrNi and CrNiMn Austenitic Stainless Steels, Hydrogen Transport and Cracking in Materials
Guvriljuk, V.G.; Hänninen, Hannu; Smouk, S.Y.; Tarasenko, A.V.; Ullakko, K.1995 Teräkset
Hänninen, H.1995 Duplex-terästen käyttöalueet, mahdollisuudet, ominaisuudet ja kehitysnäkymät
Hänninen, H.1995 Cracking and corrosion in black liquor recovery boilers
Hänninen, Hannu; POHJANNE, P; NIEMINEN, P1995 in VTT SYMPOSIA (Technical Research Centre of Finland)ISBN: 951-38-4542-7ISSN: 0357-9387Cracking and Corrosion Problems in Black Liquor Recovery Boilers
Hänninen, H.; Pohjanne, P.; Nieminen, P.1995 Materiaalin valinnan asiantuntijäjärjestelmät
Hänninen, H.1995 Mechanical Properties of Austenitic High-Nitrogen Cr-Ni and Cr-Mn Steels at Low Temperatures
Ilola, R.; Hänninen, H.; Ullakko, K.1995 Isothermal Martensitic Transformation as an Internal-Stress-Increasing Process
Liu, Y.; Xie, Z.; Hänninen, H.; van Humbeeck, J.; Pietikäinen, J.1995 Development of Properties of P/M Austenitic Stainless Steels by Nitrogen Infusion
Romu, Jyrki; Tervo, J.; Hänninen, H.; Liimatainen, J.1995 Selective Dissolution - Vacancy - Creep Model for IGSCC of Alloy 600
Saario, T.; Aaltonen, P.; Karjalainen-Roikonen, P.; Piippo, J.; Mäkelä, K.; Tähtinen, S.; Hänninen, H.1995 Stabilization of Austenite Associated with prior Formation of Martensite
Xie, Z.; Liu, Y.; Hänninen, H.1995 Water Chemistry and Materials Behaviour in PWR's and BWR's
Aaltonen, P.; Hänninen, H.1994 Application of a multipotential test method for rapid screening of austenitic stainless steels in process environments
Aaltonen, Pertti A.; Pohjanne, Pekka K.; Tahtinen, Seppo J.; Hänninen, Hannu1994 in AMERICAN SOCIETY FOR TESTING AND MATERIALS SPECIAL TECHNICAL PUBLICATION (AMERICAN SOCIETY FOR TESTING AND MATERIALS)ISBN: 0803118538ISSN: 1071-5827Properties of Nitrogen Alloyed P/M Duplex Stainless Steels
Hämäläinen, E.; Laitinen, A.; Hänninen, H.; Liimatainen, J.1994 Properties of Nitrogen Alloyed P/M + HIP Duplex Stainless Steels
Hämäläinen, E.; Laitinen, A.; Hänninen, H.; Liimatainen, J.1994 Failures of Stainless Steel Components, 6.Jahrestagung Schadensanalyse: Nichtrostende Stähle im Kraftwerks- und Anlagenbau
Hänninen, H.1994 Cracking and Corrosion Problems in Black Liquor Recovery Boilers
Hänninen, H.1994 Materiaalin valinnan asiantuntijajärjestelmät, Vaativien rakenteiden materiaalitekniikka
Hänninen, H.1994 Welding of Stainless Steels for Transport Industries
Hänninen, H.; Nordberg, H.; Johansson, L.; Hertzmann, S.; Fostervoll, H.; Lokka, M.; Vilpas, M.1994 Corrosion Risks Associated with Changing Environmental Conditions for Stainless Steels
Hänninen, H.1994 Active Wear and Failure Mechanisms of TiN Coated HSS and TiN Coated Cemented Carbide Tools when Machining HIPed Stainless Steels
Jiang, L.; Hänninen, H.; Paro, J.; Kauppinen, V.1994 Active Wear and Failure Mechanisms of TiN-Coated HSS and TiN-Coated Cemented Carbide Tools when Machining HIPped Stainless Steels
Liang, L.; Hänninen, H.; Paro, J.; Kauppinen, V.1994 Sliding Wear of High Nitrogen Austenitic Stainless Steel
Tervo, J.; Ylöstalo, O.; Hänninen, H.; Liimatainen, J.1994 Sliding Wear of High Nitrogen Austenitic Stainless Steels
Tervo, J.; Ylöstalo, O.; Hänninen, H.; Liimatainen, J.1994 Water Chemistry and Materials Degradiation in LWR's
Törrönen, K.; Aaltonen, P.; Hänninen, H.1994 Phase Transformations and Relaxation Phenomena Caused by Hydrogen in Stable Austenitic Stainless Steels
Gavriljuk, V.; Hänninen, H.; Tarasenko, A.; Tereshchenko, A.S.; Ullakko, K.1993 Stress Corrosion Cracking of Low Alloy Steel Weldments in LWR
Hänninen, H.; Aaltonen, P.; Ehnsten, U.; Arilahti, E.1993 Effects of Nitrogen on Corrosion Resistance and Hydrogen Embrittlement, Plenar speech
Hänninen, H.1993 Stress corrosion cracking of low alloy steel weldments in LWR environments
Hänninen, Hannu; Aaltonen, Pertti; Arilahti, Esko; Ehrnsten, Ulla1993 ISBN: 0873392582Internal Friction Behaviour of Virgin Dislocated Martensite
Liu, Yong; Hänninen, Hannu; Pietikäinen, Juhani1993 Low Temperature Structural Changes of Virgin Martensite as Observed by Internal Friction Method
Liu, Y.; Hänninen, H.1993 STRUCTURE AND AGING BEHAVIOUR OF FE-NI MARTENSITES
NADUTOV, VM; ULLAKKO, KM; GAVRILJUK, VG; Hänninen, Hannu1993 Wear Resistance of High Nitrogen Austenitic Stainless Steels Manufactored by Molten and Powder Metallurgy Routes
Romu, Jyrki; Tervo, J.; Hänninen, H.; Liimatainen, J.1993 Stress Corrosion Cracking of Cold Worked Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Trolle, M.1993 Stress corrosion cracking of cold worked austenitic stainless steel pipes in BWR reactor water
Tähtinen, Seppo; Hänninen, Hannu; Trolle, Margareta1993 ISBN: 0-87339-258-2Hot and Cold Rolling of High Nitrogen Fe-Mn-Cr-N and Fe-Ni-Cr-N Austenites
Ullakko, K.; Tarkiainen, R.; Levonmaa, R.; Gavriljuk, V.; Hänninen, H.1993 Welding of Duplex and Superduplex stainless steels with Nitrogen Containing Shielding Gas
Väisänen, P.; Hänninen, H.; Kyröläinen, A.1993 Effect of Hydrostatic Pressure on Isothermal Martensitic Transformation in an Fe-Ni-C Alloy at Low Temperatures
XIE, ZL; Hänninen, Hannu; Pietikäinen, Juhani1993 The Aging of Martensite of Iron-Nitrogen Alloys
Gavriljuk, V.; Nadutov, V.; Ullakko, K.; Hänninen, H.1992 Threshold Values for Corrosion Fatigue Crack Growth Rate of Pressure Vessel Steels on PWR Primary Water
Hänninen, H.; Arilahti, E.; Ehrnsten, U.1992 Direct Observations on Hydrogen Effects on Fracture of A533B Steel
Hänninen, H.; Lee, T.; Robertson, I.; Birnbaum, H.1992 THRESHOLD VALUES FOR CORROSION-FATIGUE CRACK-GROWTH RATE OF PRESSURE-VESSEL STEELS IN PWR PRIMARY WATER
Hänninen, Hannu; ARILAHTI, E; EHRNSTEN, U1992 ISBN: 951-96485-1-8On the Use of a New Electrode Design for Studying Pitting Corrosion Potensials of Stainless Steels with a Scratched Electrode Technique
Onnela, J.; Forsen, O.; Hänninen, H.; Yläsaari, S.1992 ON THE USE OF A NEW ELECTRODE DESIGN FOR STUDYING PITTING CORROSION POTENTIALS OF STAINLESS-STEELS WITH A SCRATCHED ELECTRODE TECHNIQUE
ONNELA, J; FORSEN, O; Hänninen, Hannu; YLASAARI, S1992 ISBN: 951-96485-0-XCompound Tube Cracking Problems in Black Liquor Recovery Boilers
Pohjanne, P.; Hänninen, H.1992 Cracking of Compound Tubes in Black Liquor Recovery Boilers
POHJANNE, P; Hänninen, Hannu; MAKIPAA, M; EHRNSTEN, U1992 in TAPPI PROCEEDINGS (TAPPI PRESS)ISBN: 0-89852-862-3ISSN: 1047-305XStress Corrosion Cracking of INCONEL X-750 in LWR Environments
SAARINEN, K; Hänninen, Hannu; EHRNSTEN, U1992 ISBN: 951-96485-1-8Application of Contact Electric Resistance Technique for Corrosion Studies of Nuclear Power Plant Material in LWR Water Environments
Saario, T.; Hänninen, H.1992 APPLICATION OF CONTACT ELECTRIC-RESISTANCE TECHNIQUE FOR CORROSION STUDIES OF NUCLEAR-POWER-PLANT MATERIALS IN LWR WATER ENVIRONMENTS
SAARIO, T; MARICHEV, VA; Hänninen, Hannu1992 ISBN: 951-96485-1-8HYDROGEN EFFECTS IN AUSTENITIC STAINLESS STEELS
Hänninen, Hannu; Hannula, Simo Pekka; Tähtinen, Seppo1981 Non-refereed scientific articles
Book sectionInfluence of Material, Environment and Strain Rate on Environmentally Assisted Cracking of Austenitic Nuclear Materials
Ehrnsten, Ulla; Karlsen, Wade; Pakarinen, Janne; Ahonen, Matias; Kuivalainen, Pasi; Ivanchenko, Mykola; Saukkonen, Tapio; Hänninen, Hannu2011 ISBN: 978-951-38-7689-0ISSN: 1235-0605Unrefereed conference proceedingsInfluence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 Actuation of magnetic shape memory alloys at low temperatures
Straka, Ladislav; Hänninen, Hannu; Heczko, Oleg; Sozinov, Alexei2014 ISBN: 978-3-933339-22-5Enhanced Fatigue Behavior of Ni-Mn-Ga Magnetic Shape Memory Alloys with Tailor-made Fine Twin Microstructure
Straka, L.; Hänninen, H.; Soroka, A.; Ezer, Y.2012 ISBN: 978-3-933339-19-5EAC Susceptibility of Nickel Based Weld Metals in Doped Steam
Hänninen, Hannu; Toivonen, Aki; Karlsen, Wade; Saukkonen, Tapio; Brederholm, Anssi; Aaltonen, Pertti; Ehrnstén, Ulla2010 Scientific books (monographs)
Book (editor)Statistical Aspects of Fatigue and Fracture
Virkkunen, I.; Marquis, G.; Wallin, Kim; Hänninen, Hannu2000 Publications intended for professional communities
Article in professional journalKäyttövarmuutta kattiloihin uusilla materiaalivaihtoehdoilla
Tuurna, Satu; Romu, Jyrki; Hänninen, Hannu; Mahanen, Jouni; Puikkonen, Tony2017 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hydrogen effects on mechanical properties of reduced activation ferrite-martensite and ODS-RAFM steels
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Ultralujien rakenneterästen hitsattavuus ja hitsausliitosten ominaisuudet
Peltonen, Mikko; Kukkonen, Akseli; Nummela, Sami; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinjätekapselin kuparivaippa: kestääkö, syökö korroosio, murtaako vety?
Rantala, Juhani; Hänninen, Hannu; Aromaa, Jari; Carpén, Leena; Rajala, Pauliina2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Aalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Aalto-yliopiston opetus- ja tutkimustoiminta hitsaustekniikan eturintamassa
Vilaça, Pedro; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Hänninen, Hannu2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Ydinvoimalaitosten vaativien ruostumattomista teräksistä valmistettujen komponenttien hitsaus
Aaltonen, Pertti; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Ukkonen, A.; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2004 in Welder (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels.
Paro, Jukka; Hänninen, Hannu; Kauppinen, Veijo2001 in WEAR (Elsevier BV)ISSN: 0043-1648Stainless steel research in the laboratory of Engineering Materials
Hänninen, H.1997 in Polysteekki (Elsevier BV)ISSN: 1455-9595Termomekaanisesti valssatun lujan RAEX 500 M teräksen hitsaus
Kotamies, J.; Brederholm, A.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Uusien ruostumattimien 12%Cr terästen hitsaus
Lokka, M.; Lahti, K.; Vilpas, M.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Adhesive wear of high nitrogen austenitic stainless steels
Tervo, J.; Hänninen, H.; Ylöstalo, O.; Liimatainen, J.1994 in TRIBOLOGIA (Suomen Tribologiayhdistys)Article in professional conference proceedingsEffect of welding conditions on the hot cracking susceptibility of carbon steel
Amaya, Toru; Yonezawa, Toshio; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu2016 Modelling fracture behaviour of high strength low alloy steel with microstructural FE model and crystal plasticity
Andersson, Tom; Laukkanen, Anssi; Sippola, Merja; Saukkonen, Tapio; Hänninen, Hannu2016 Thermal aging induced phase transformations in nuclear grade type 316L stainless steel weld metals
Ivanchenko, Mykola; Ehrnstén, Ulla; Forsström, Antti; Hänninen, Hannu; Ballinger, Ronald2016 Hydrogen absorption and behavior in copper as a result of corrosion reactions and γ-radiation in spent nuclear fuel repository conditions
Yagodzinskyy, Yuriy; Hänninen, Hannu2016 Hot cracking susceptibility evaluation of Alloy 52 and 152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi2016 Hot cracking susceptibility evaluation of Alloy 52/152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi; Hänninen, Hannu2016 Characterization of strain localization in metastable austenitic stainless steel by digital image correlation
Antin, Kim-Niklas; Talonen, Juho; Bossuyt, Sven; Hänninen, Hannu2015 Computational estimation of risk of hot cracking in narrow gap welding
Keinänen, Heikki; Hänninen, Hannu; Sarikka, Teemu2015 Published development or research reportStructural integrity of Ni-base alloy welds
Hänninen, Hannu; Brederholm, Anssi; Sarikka, Teemu; Mouginot, Roman; Holmström, Petra; Saukkonen, Tapio; Toivonen, Aki; Karjalainen-Roikonen, Päivi; Nevasmaa, Pekka; Keinänen, Heikki; Leskelä, Esa; Ahonen, Matias; Ehrnstén, Ulla; Aaltonen, Pertti2014 Microstructures of nickel-base alloy dissimilar metal welds
Mouginot, Roman; Hänninen, Hannu2013 Materials Science and Technology - Nuclear Materials, Advanced Course
Hänninen, Hannu; Kiesi, Timo2012 Hydrogen Sensitivity of Different Advanced High Strength Microstructures (HYDRAMICROS)
Hickel, Tilmann; Duprez, L.; Hänninen, Hannu; Thiessen, R.; Mraczek, K.2011 Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2011 White Paper on Crack Initiation of Structural Materials in LWRs
Rik-Wouter, B.; Kilian, R.; Oijerholm, J.; Horner, T.; Raquet, O.; Ehrnsten, U.; Martin, O.; Novotny, R.; Ritter, S.; Perosanz, F.; Wessels, J.; Hänninen, H.2011 Toughness Properties of Ferritic Stainless Steels
Levonmaa, Raimo; Hänninen, Hannu; Romu, Jyrki2010 Properties of FeCrAl Alloys and Austenitic Stainless Steel for Boiler Environments
Pohja, Rami; Hänninen, Hannu2010 State-of-the-art of thermoelectric materials processing
Tervo, Jyrki; Manninen, Antti; Ilola, Risto; Hänninen, Hannu2009 Friction Stir Welding, Stir, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu; Api, Marko; Keinänen, Heikki; Martikainen, Hannu; Tervo, Jyrki; Sirén, Mika2008 Friction Stir Welding of High Temperature Materials, Kuuma, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2008 New Amorphous Alloys in Metal Layers
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2008 Hot Cracking and Environment-assisted Cracking Susceptibility of Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Gripenberg, Hans; Toivonen, Aki; Ehrnsten, Ulla; Aaltonen, Pertti2007 Mechanical Characterisation of Austenitic Stainless Steels and Inconel Alloys under Dynamic Strain Aging Conditions
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 Residual Stress Measurements of Copper Canister EB-welds
Gripenberg, Hans; Hänninen, Hannu2006 Dissimilar Metal Weld Joints and their Performance in Nuclear Power Plant and Oil Refinery Conditions
Hänninen, Hannu; Aaltonen, Pertti; Brederholm, Anssi; Ehrnstén, Ulla; Gripenberg, Hans; Toivonen, Aki; Pitkänen, Jorma; Virkkunen, Iikka2006 Dynamic Strain Aging of Nuclear Power Plant Materials
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Hänninen, Hannu2006 Hitsaushuurun vähentäminen teollisuudessa
Koskinen, Ari; Schimberg, R.; Hänninen, Hannu2006 Hitsaamon pienhiukkaset - Fine Particles in Welding Workshop
Koskinen, Ari; Hänninen, Hannu2006 Thermal Fatigue Testing of the PWR Secondary Circuit Piping
Mononen, Janne; Virkkunen, Iikka; Hänninen, Hannu2006 Microstructure of Friction Stir Welded Copper Joints
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2006 Hitsaushuurun pienhiukkaset ja niiden terveydelliset vaikutukset
Keränen, Marko; Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2005 Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking
Petterson, R.; Flyg, J.; Wessman, S.; Herting, G.; Ibrahim, N.; Fatehi, K.; Qvarfot, R.; Lo Piccolo, E.; Scoppio, L.; Ladwein, T.; Ligier, V.; Coudreuse, L.; Matres Serrano, V.; Hochölter, G.; Kristzt, K.; Richter, A.; Kivisäkk, U.; Leinonen, H.; Kinnunen, T.; Varis, P.; Nöjd, K.; Ohligschläger, T.; Virkkunen, Iikka; Hänninen, Hannu; Romu, Jyrki; Taulavuori, T.2005 Selvitys: Soodakattila tulevaisuudessa materiaalivaihtoehtojen valinta osaprojekti
Pohjanne, P.; Hänninen, Hannu; Kiesi, Timo2005 Copper-carbon Composites
Romu, Jyrki; Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Materials Selection for High Temperature Applications
Savolainen, Kati; Mononen, Janne; Ilola, Risto; Hänninen, Hannu2005 Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet
Romu, Jyrki; Hänninen, Hannu2004 Katalyyttipinnat ja niiden valmistus
Ilola, Risto; Romu, Jyrki; Papula, Suvi; Hänninen, Hannu2003 Narrow Gap Arc Welding Experiments of Thick Copper Sections
Pohja, Rami; Vestman, Heikki; Jauhiainen, Petra; Hänninen, Hannu2003 Rakenteiden keventäminen termomekaanisesti valmistettuja teräksiä käyttämällä (TERMO)
Brederholm, Anssi; Nevasmaa, Pekka; Laukkanen, Anssi; Wallin, Kim; Nenonen, Pertti; Gripenberg, Hans; Karppi, Risto; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; Japanin matkakertomus
Hänninen, Hannu; Tiitinen, Eero; Tanaka, Toshi; Kiesi, Timo2002 GT-MAT: Kaasuturbiinien materiaalit: Inconel 738 LC superseoksen termisen väsymisen kestävyys ja vaurioasteen arviointi ainettarikkomattomasti
Kemppainen, Mika; Aalto, Miikka; Hänninen, Hannu2002 Pinnoitushitsaus eri menetelmillä
Keränen, Marko; Luukas, Mikko; Kasurinen, Heikki; Kakko, Ago; Hänninen, Hannu2002 Kapearailohitsaus perinteisillä menetelmillä
Paljakka, Vivi; Korhonen, Mika; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; rakennusasteen noston vaikutukset materiaalin valintaan, materiaalitutkimus
Pohjanne, Pekka; Hänninen, Hannu; Kiesi, Timo2002 Superplasticity in stainless steels
Romu, Jyrki; Hänninen, Hannu2002 Precipitation of secondary phases in Duplok 27 stainless steel with emphasis on copper effects
Smuk, Olena; Nenonen, Pertti; Hänninen, Hannu; Liimatainen, Jari2002 Corrosion Resistance of Welded Stainless Steels in Salt Spray Chanber Tests and Road Conditions
Alenius, Marko; Kyröläinen, A.; Vilpas, Martti; Hänninen, Hannu2001 Effects of EDM on Surface Residual Stresses in a TMCP Steel
Gripenberg, H.; Siiriäinen, J.; Saukkonen, T.; Hänninen, Hannu2000 Termisesti väsytettyjen kaasuturbiinimateriaalien karakterisointi: tulokset väsytyskokeista, rikkovasta tarkastuksesta sekä jäännösjännitys- ja röntgendiffraktiomittauksista
Kemppainen, M.; Hänninen, Hannu2000 Design and Implementation of Ring-Core Method for Residual Stress Measurement
Siiriäinen, J.; Gripenberg, H.; Hänninen, Hannu2000 Residual Stresses Induced by Cyclic Thermal Loads
Virkkunen, I.; Kemppainen, M.; Hänninen, Hannu2000 Fabrication and properties of stainless steel sandwich structures
Alenius, M.; Hänninen, H.1999 Kaasuturbiinien korkean lämpötilan vaurioitumismekanismit
Kemppainen, M.; Hänninen, H.1999 Hitsatut ja hipatut paksut pinnoitteet korkean lämpötilan sovelluksissa
Viitala, T.; Hänninen, H.1999 The effect of sulphate on crack growth rates in stainless steel and alloy 182 weld metal in BWR environment
Aaltonen, P.; Ehrnsten, U.; Hänninen, H.1998 Proceedings of the NI-seminar "Stainless Steels in Transport Industry" February 4-5. 1998
Alenius, M.; Lokka, M.; Hänninen, H.1998 Esiselvitys soodakattilan uusista rakennemateriaaleista
Hänninen, H.; Pohjanne, P.; Laitinen, A.; Saarinen, P.1998 Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Jagodzinski, yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Internal Friction Study of Interstitial Behaviour in Low Activated Martensitic F82H Steel
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Tähtinen, S.; Hänninen, H.1998 Kilpailukykyinen hitsaustuotanto: kustannus ja laatutehokkuus
Karppi, R.; Brederholm, A.; Hänninen, H.1998 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCil2 solution
Leinonen, H.; Hänninen, H.1998 Elastic behaviour of nitrogen alloyed austenitic stainless steels
Tervo, J.; Tasarenko, A.; Hänninen, H.1998 Kaasuturpiinit - esiselvitys
Auerkari, P.; Heikinheimo, L.; Korpiola, K.; Kauppinen, P.; Lepistö, T.; Vuoristo, P.; Hänninen, H.; Virkkunen, I.1997 Low temperature sensitisation of austenitic stainless steels
Ehrnstén, U.; Aaltonen, P.; Hänninen, H.1997 Ruostumattomat teräkset kuljetusvälineissä - Teollisuussovellukset
Lahti, K.; Vilpas, M.; Heikonen, M.; Lokka, M.; Hänninen, H.1997 Thermal fatigue of recovery boiler composite tube
Saarinen, P.; Hänninen, H.1997 The use of stainless steels in transport vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Heikonen, M.; Alenius, M.; Hänninen, H.1997 Phase Transformations and Relaxation Phenomena in Hydrogen-Charged CrNiMn and CrNi Stable Austenitic Stainless Steel
Gavriljuk, V.G.; Hänninen, H.; Smouk, S.Yu; Tarasenko, A.V.; Tereshchenko, A.S.; Ullakko, K.1996 Kompound materiaalit
Hänninen, H.1996 Kompound-putken termisen ruiskupinnoitteen karakterisointi
Ilola, R.; Hänninen, H.1996 Ruostumattoman 12%Cr RHS-putkipalkin pienaliitoksen väsymiskestävyys
Lahti, K.; Hänninen, H.; Vilpas, M.1996 Stainless for Transport - Milestone report 1.10.1993 - 30.9.1995
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Stainless for Transport
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Properties of NKK-Serena Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1995 Funktionaaliset materiaalit ja älykkäät rakenteet koneenrakennuksessa
Brederholm, A.; Ullakko, K.; Hänninen, H.1995 HIPed P/M Duplex Stainless Steels
Hämäläinen, Esa; Hänninen, H.; Liimatainen, J.1995 HIPped/ P/M Maraging steels
Nieminen, M.; Hänninen, H.; Liimatainen, J.1995 HIPed P/M High Nirtogen Austenitic Stainless Steels
Tervo, J.; Romu, Jyrki; Hänninen, H.; Liimatainen, J.1995 Elinjaksokustannus- ja elinkaarianalyysi ja niiden soveltaminen materiaalinvalinnassa
Lokka, M.; Hänninen, H.1994 Nitrogen Alloyed Martensitic Steels
Romu, J.; Liu, Y.; Hänninen, H.1994 The Use of Narrow-Gap Welding for Stabilized Stainless Steel Pipings - A Literature Survey
Vilpas, M.; Pelli, R.; Aaltonen, P.; Hänninen, H.1994 Cyclic Crack Growth Evaluation of a 20MnMoNi55 Piping Steel in High-Oxygen Reactor Water
Aaltonen, P.; Rintamaa, R.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 ICG-EAC Bolt-loaded WOL-Specimen Round Robin results on VTT for RPV-steel Weldments Tested in PWR Water
Aaltonen, P.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 Thermal Fatigue - A Literature Review
Bartsch, K.; Hänninen, H.; Nieminen, M.1993 Materiaalin valinnan asiantuntijajärjestelmät, vaativien rakenteiden materiaalitekniikka
Hänninen, H.1993 Typpiseostuksen vaikutus ruostumattomien terästen ominaisuuksiin
Nieminen, M.; Hänninen, H.1993 High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies
Romu, J.; Hänninen, H.1993 Ydinvoimalaitosten paineastiaterästen vetyhaurauden ja säteilyhaurastumisen yhteisvaikutukset
Hänninen, H.1992 Pulverimetallurgisesti valmistettujen maraging-terästen ominaisuudet
Laitinen, Eero; Nieminen, Markku; Hänninen, H.1992 Muotohitsaus, menetelmät, käyttöperusteet ja tulevaisuudennäkymät
Niini, E.; Vartiainen, S.; Vilpas, M.; Hänninen, H.1992 Ruostumattomien terästen jännityskorroosion ja korroosioväsymisen estäminen
Pohjanne, P.; Hänninen, H.1992 Austeniittisen ja duplex ruostumattomien terästen jännityskorroosio ja korroosioväsyminen kuumissa kloridiliuoksissa
Pohjanne, P.; Hänninen, H.1992 Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Nenonen, P.; Ehrnsten, U.1992 Overview of the Nuclear Power Plant Structural Integrity Research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, H.; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.1992 Patents and invention disclosures
PatentMethod for Producing Defects and Tensile Residual Stresses
Elfving, K.; Hänninen, Hannu; Kemppainen, Mika; Saarinen, P.; Virkkunen, Iikka2004 TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Antin, Kim-Niklas; Talonen, Juho; Hänninen, Hannu; Singh, Preet2014 Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Kemppainen, H.; Hänninen, Hannu; Törrönen, K.; Salonen, S.1982 in ULTRAMICROSCOPY (Elsevier Science B.V.)ISSN: 0304-3991
Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel
Localisation of plastic deformation in friction stir and electron beam copper welds
Effects of grain size and deformation temperature on hydrogen-enhanced vacancy formation in Ni alloys
Hydrogen effects on mechanical properties of 18%Cr ferritic stainless steel
Thermal ageing and short-range ordering of Alloy 690 between 350 and 550 °C
Hydrogen-induced delayed cracking in TRIP-aided lean-alloyed ferritic-austenitic stainless steels
Behavior of small cracks under negative stress ratio fatigue loading
Effect of mechanical mismatch on fracture mechanical behavior of SA 508 – Alloy 52 narrow gap dissimilar metal weld
Environmentally assisted cracking crack initiation in nickel-based alloy dissimilar metal welds in doped and pure steam and pressurized water reactor water
Investigation of microstructure changes in ODS-EUROFER after hydrogen loading
Weldability of Ni-Based Superalloys Waspaloy® and Haynes® 282® - A Study Performed with Varestraint Testing
Gamma radiation induces hydrogen absorption by copper in water
Material characterization of high-frequency mechanical impact (HFMI)-treated high-strength steel
Strain hardening of cold-rolled lean-alloyed metastable ferritic-austenitic stainless steels
The relation between lattice parameters and very low twinning stress in Ni50Mn25+xGa25-x magnetic shape memory alloys
Role of excessive vacancies in transgranular stress corrosion cracking of pure copper
Grain boundary engineering of metastable 204Cu, 301, and 301LN austenitic stainless steels to improve their sensitization resistance
Hydrogen-induced crack nucleation in tensile testing of EUROFER 97 and ODS-EUROFER steels at elevated temperature
Hydrogen uptake from plasma and its effect on EUROFER 97 and ODS-EUROFER steels at elevated temperatures
Hydrogen charging process instrument
Characterization of delayed cracking in deep drawn swift cups of metastable austenitic stainless steels
Delayed cracking of low-nickel austenitic stainless steel studied with constant load tensile testing
Delayed cracking of metastable austenitic stainless steels after deep drawing
Effect of Electrochemical Potential on Stress Corrosion Cracking Susceptibility of EN 1.4301 (AISI 304) Austenitic Stainless Steels in Simulated Hot Black Liquor
Hydrogen effects on fracture of high-strength steels with different micro-alloying
Effect of MnS inclusion dissolution on carbon steel stress corrosion cracking in fuel-grade ethanol
Effects of hydrogen and impurities on void nucleation in copper Simulation point of view
Influence of grain size distribution on the Hall-Petch relationship of welded structural steel
Effect of internal hydrogen on delayed fracture of metastable low-Ni austenitic stainless steels
Effect of Residual Stress and Strain-Induced a´-Martensite on Delayed Cracking of Metastable Austenitic Stainless Steels
Pitting Corrosion Resistance of Mn-alloyed Austenitic Stainless Steels
Mechanically-induced demagnetization and remanent magnetization rotation in Ni-Mn-Ga(-B) magnetic shape memory alloy
Role of Nonmetallic Inclusions on Hydrogen Embrittlement of High-strength Carbon Steels with Different Micro-alloying
Stress corrosion cracking of carbon steel in ethanolgasoline blends
Differences between secondary and primary flash formation on coating of HSS with AISI 316 using friction surfacing
Hydrogen Effect of Tensile Properties of EUROFER 97 and ODS-EUROFER Steels
Comparative Study of Hydrogen Uptake and Diffusion in ODS Steels
Effect of Inclusions and Precipitates on Hydrogen Embrittlement of Mn-Alloyed Austenitic Stainless Steels
Corrosion resistance of alloys F91 and Fe-12Cr-2Si in lead-bismuth eutectic up to 715°C
Effect of intermartensite transformation on twinning stress in Ni-Mn-Ga 10?M martensite
Thermal Desorption of Hydrogen from AISI 316L Stainless Steel and Pure Nickel
Mechanistic study of stress corrosion cracking of carbon steel in ethanol
Hydrogen-Induced Mechanical Losses in Oxygen-Free Copper
Anisotropic distribution of non-metallic inclusions in a forged steel roll and its influence on fatigue limit
Banding in Copper Friction Stir Weld
Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel
Steady-State Tensile Viscous Flow Forming of Bulk Metallic Glass
Temperature Dependence of Twinning Stress of Type I and Type II Twins in 10M Modulated Ni-Mn-Ga Martensite
Hydrogen-Enhanced Creep and Cracking of Oxygen-Free Phosphorus-Doped Copper
Hydrogen-Dislocation Interaction in Austenitic Stainless Steel Studied with Mechanical Loss Spectroscopy
Thermodynamic modeling of the stacking fault energy of austenitic steels
Stress Corrosion Cracking of Carbon Steel in Ethanol
Stress Corrosion Cracking Crevice Interaction in Austenitic Stainless Steels Characterized by Acoustic Emission
A combined arc-melting and tilt-casting furnace for the manufacture of high-purity bulk metallic glass materials
Bulk metallic glass tube casting
Highly mobile twinned interface in 10 M modulated Ni-Mn-Ga martensite: Analysis beyond the tetragonal approximation of lattice
Twin interaction and large magnetoelasticity in Ni-Mn-Ga single crystals
Temperature dependence of single twin boundary motion in NiMnGa martensite
Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption Spectroscopy
Effect of Hydrogen on Plastic Strain Localization in Single Crystals of Austenitic Stainless Steel
Effect of Plastic Deformation on Anelastic Mechanical Losses in Multicomponent Substitutional Austenitic Alloys
Microstructural Manifestation of Dynamic Strain Aging in AISI 316 Stainless Steel
Corrosion Properties of Nickel-Free Austenitic Stainless Steels in 0.5M H2SO4 and 0.5M H2SO4 + 0.4M NaCl
Influence of Chunky Graphite on Mechanical and Fatigue Properties of Heavy Section Cast Iron
Effect of substrate deformation on functional properties of atomic-layer-deposited TiO2 coatings on stainless steel
Anelastic Mechanical Loss Spectrometry of Hydrogen in Austenitic Stainless Steels
Mechanical and Corrosion Properties of Spot-welded High-strength Austenitic Stainless Steel EN 1.4318
Photocatalytic Activity of Atomic Layer Deposited TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys
Impact Toughness Properties of Nickel-Free Austenitic Stainless Steels
Characterization of the Mechanical Properties of Low-nickel Austenitic Stainless Steels
Detection of structural damage of aluminum alloy 6082 using elastic wave modulation spectroscopy
Open-circuit potential as an indicator of damage of atomic layer deposited TiO2 on AISI 304 stainless steel
Activation of magnetic shape memory effect in Ni-Mn-Ga alloys by mechanical and magnetic treatment
Mechanical Properties of Spot-Welded Austenitic Stainless Steels and their Dissimilar Metal Joints
Fracture of Titanium Plates Used for Mandibular Reconstruction Following Ablative Tumor Surgery
Formation of Shear Bands and Strain-induced Martensite During Plastic Deformation of Metastable Austenitic Stainless Steels
Energetics of Plastic Deformation of Metastable Austenitic Stainless Steels
Exploring the Mechanical Properties of Spot Welded Dissimilar Joints for Stainless and Galvanized Steels
Internal Friction Studies of Carbon and its Redistribution Kinetics in Inconel 600 and 690 Alloys under Dynamic Strain Aging Conditions
State-of-the-Art of Friction Stir Processing (FSP)
Corrosion Fatigue of Weld-Bonded Austenitic Stainless Steels in 3.5 % NaCl Solution
Effect of Tensile Properties on the Energy-Absorbing Capacity of Weld-Bonded Austenitic Stainless Steel Profiles
Forced Torsion Pendulum for Studies of Internal Friction at Solid-liquid Interface
Forced torsion pendulum for studies of interactions at solid-liquid interface
MFI®-suodatinteknologia hitsaushuurujen poistamiseen
Hitsaajan henkilökohtaisen altistuksen vähentäminen puhallinmaskeilla
Friction Stir Weldability of Copper Alloys
Effect of strain rate on the strain-induced γ, → α′-martensite transformation and mechanical properties of austenitic stainless steels
Effect of Strain-induced g->a' Transformation on Mechanical Properties of Austenitic Stainless Steels
Interactions of Hydrogen in Copper Studied by Internal Friction Method
Interactions of hydrogen in copper studied by internal friction technique
Manufacturing of shapes forms from stainless steels with superplastic forming
Manufacturing of Shaped Forms from Stainless Steels with Superplastic Forming
Mechanical ana corrosion properities of P/M-HIP super duplex stainless steel after different industrial heat treatments as used for large components
Mechanical and Corrosion Properties of P/M-HIP Super Duplex Stainless Steel after Different Industrial Heat Treatments as Used for Large Components
Microstructures of a Powder Metallurgy--Hot-Isostatically Pressed Super Duplex Stainless Steel Forming in Industrial Heat Treatments
Corrosion Fatigue of Spot-Welded Austenitic Stainless Steels in 3.5 % NaCl Solution
Characterisation and Corrosion of Spot Welds of Austenitic Stainless Steels
Comparison of the Electric Properties and ESCA Result of Oxide Films Formed on AISI 316L Steel in Simulated BWR Conditions During SSRT
Comparison of the Electric Properties and ASCA Result of Oxide Films Formed on AISI 316 LNG Steel in Simulated BWR Conditions During SSRT
Comparison of Different Methods to Measure Strain-Induced a?-Martensite Content in Austenitic Steels
Damping Properties of Austenitic Stainless Steels Containing Strain-Induced Martensite
Comparison of different methods for measuring strain induced α′-martensite content in austenitic steels
Grain Refinement Process for Superplastic Forming of AISI 301 and 304L Austenitic Stainless Steels
Grain refinement processes for superplastic forming of AISI 304 and 304L austenitic stainless steels
Comparison of Realistic Artificial Cracks and In-service Cracks
Advanced Flaw Production Method for In-Service Inspection Qualification Mock-ups
Realistic Cracks for In-Service Inspection Qualification Mock-ups
Cost Comparison of FSW and MIG Welded Aluminium Panels
Prediction and Measurement of Residual Stresses in Cladded Steel
On Irradiation Embrittlement and Recovery Annealing Mechanisms of Cr-Mo-V Type Pressure Vessel Steels
Dwell effects on high temperature fatigue behavior. Part I
Dwell Effects on High Temperature Fatigue - Damage Mechanisms: Part II
Effects of Processing and Manufacturing of High Nitrogen-containing Stainless Steels on their Mechanical, Corrosion and Wear Properties
Tool wear and machinability of X5 CrMnN 18 18 stainless steels
Effects of the temperature of warm rolling on the superplastic behaviour of AA5083 aluminium base alloy
A New Method for Studing Thermal Desorption of Hydrogen from Metals Based on Internal Friction Technique
A new method for studying thermal desorption of hydrogen from metals based on internal friction technique
Materiaalitekniikan opetuksen ja tutkimuksen kehitys Suomessa ja ulkomailla
Hydrogen-probe mechanical spectroscopy for studying local ordering in concentrated substitutional alloy
Interaction of Hydrogen with Dislocation Pile-Ups and Vacancy Generation at Plastic Deformation
Internal Friction Study of Environmental Effects on Metals and Alloys
Interaction of hydrogen with dislocation pile-ups and hydrogen induced softening of pure iron
Narrow Gap GTA Welding of Stainless Steels
Use of Stainless Steels in Bus Coach Structures
Nominal Stress Range Fatigue of Stainless Steel Fillet Welds - the Effect of Weld Size
Application of the internal friction method to studying microstructural effects in fusion materials
Corrosion properties of HNS
Dynamic strain aging of austenitic high nitrogen Cr-Ni and Cr-Mn steels
Internal friction study of hydrogen behaviour in low activated martensitic F82H steel
Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steels studied by means of internal friction
Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCl2 solution
Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
Internal friction study of decomposition kinetics of SAF 2507 type duplex stainless steel
Effect of nitrogen alloying on elastic coefficients of austenitic stainless steels
Role of nitrogen in improving pitting corrosion resistance of high-alloy austenitic and duplex stainless steel welds
Study of Snoek-type relaxation in hydrogenated Inconel 600
Internal friction in brasses after oxidation in tap water by anodic polarisation
Study of Snoektype relaxation in hydrogenated Inconel-600
Low-frequency internal friction of pure copper after anodic polarisation in sodium nitrite solution
Corrosion properties of HIPed P/M duplex stainless steels
Hot and Cold Rolling of High Nitrogen Cr-Ni and Cr-Mn Austenitic Stainless Steels
Mechanical properties of powder metallurgy duplex stainless steels
Internal friction of Fe-N martensite at low temperature
Internal Friction in Hydrogen-Changed CrNi and CrNiMn Austenitic Stainless Steels
Internal friction in hydrogen-charged CrNi and CrNiMn austenitic stainless steels
Mechanical properties of austenitic high-nitrogen Cr-Ni and Cr-Mn steels at low temperatures
Comparison of grindability of HIPped austenitic 316L, duplex 2205 and super duplex 2507 and as-cast 304 stainless steels using alumina wheels
Active wear and failure mechanisms of TiN-coated high speed steel and TiN-coated cemented carbide tools when machining powder metallurgically made stainless steels
Effects of the composition, shape factor and area fraction of sulfide inclusions on the machinability of re-sulfurized free-machining steel
Effect of non-metallic inclusions on corrosion fatigue resistance of P/M duplex stainless steels
Corrosion fatigue resistance of powder metallurgy and forged duplex stainless steels
Chloride-Induced Stress Corrosion Cracking of Powder Metallurgy Duplex Stainless Steels
Active Wear and Failure Mechanisms of Tin-Coated High Speed and TiN-Coated Cemented Carbide Tools when Machining Powder Metallurgically Made Stainless Steels
Development of properties of P/M austenitic stainless steels by nitrogen infusion
Phase transformations and relaxation phenomena caused by hydrogen in stable austenitic stainless steels
Stabilization of Austenite Associated with Pior Formation of Martensite
Jälkikäsittelyn vaikutus ruostumattoman teräksen hitsin koroosionkestävyyteen
Isothermal martensitic transformation as an internal stress-increasing process
Ruostumattomat teräkset kuljetusvälineissä
Stabilization of austenite associated with prior formation of martensite
Hydrogen-induced phases in AISI 310 type steel
Welding Research
Adhesive Wear of High Nitrogen Austenitic Stainless Steel
Stabilization of retained austenite due to partial martensitic transformations
Cyclic crack growth evaluation of a 20MnMoNi55 piping steel in high-oxygen reactor water
Effects of nitrogen on hydrogen-induced phase transformations in stable austenitic steel
On Internal Friction Mechanisms in Hydrogen Charges Stable Austenitic Stainless Steel
Effect of nitrogen on internal friction of hydrogen charged stable austenitic stainless steels
On internal friction mechanisms in hydrogen charged stable austenitic stainless steel
In situ observations on effects of hydrogen on deformation and fracture of A533B pressure vessel steel
Phenomena of material degradation with time relevant to reactor pressure vessels
Overview of the Nuclear Power Plant Structural Integrite Research in Finland
Overview of the nuclear power plant structural integrity research in Finland
Substructures of Thin Plate Martensite Formed under Applied Plane Stresses at 4K
Isothermal martensitic transformation under hydrostatic pressure in an Fe-Ni-C alloy at low temperatures
Substructures of thin-plate martensite formed under applied plane stress at 4 K
The Use of Different Techniques for Determination of Pitting Corrosion Potential of Austenitic Stainless Steel
Characterization of austenitic stainless steel pipe welds after prolonged power plant exposure
Static and cyclic crack growth of low alloy steels in high-oxygen water simulating HDR test conditions
Evaluation of the EPR technique for measuring sensitization in type 304 stainless steel
Stress corrosion and thermal fatigue - Experiences and countermeasures in austenitic SS pipings of finnish bwr-plants
Effects of MnS inclusion dissolution on environmentally assisted cracking in low-alloy and carbon steels
Environment sensitive cracking in pressure boundary materials of light water reactors
Hydrogen-induced microtwinning in ferritic stainless steels
Hydrogen-induced phase transformations in an austenitic stainless steel
EFFECT OF TEMPERING ON CORROSION AND MECHANICAL PROPERTIES OF CAST ALUMINIUM BRONZES.
The effect of heat treatment on the microstructure and corrosion resistance of inconel X-750 alloy
INTERGRANULAR CORROSION TESTING OF NICKEL-BASE ALLOYS.
Metallurgical effects on the corrosion resistance of a low temperature sensitized welded aisi type 304 stainless steel
Crystallography of hydrogen-induced surface cracking in a spherical austentic stainless steel single crystal
Optimization of metallurgical variables in fracture prevention
Influence of nitrogen alloying on hydrogen embrittlement in AISI 304-type stainless steels
ON THE STRUCTURE OF OXIDE LAYERS OF STAINLESS STEELS FORMED IN SIMULATED LIGHT WATER REACTOR CONDITIONS.
The Effect of Sigma Phase Formation on the Corrosion and Mechanical Properties of Nb-Stabilized Stainless Steel Cladding
Electrochemical methods for testing the intergranular corrosion susceptibility of stainless steels
On the mechanisms of environment sensitive cyclic crack growth of nuclear reactor pressure vessel steels
MICROPROCESSES IN STRESS-CORROSION CRACK INITIATION IN AUSTENITIC STAINLESS-STEELS
On grain boundary segregation in austenitic stainless steels
Pipe failure caused by thermal loading in BWR water conditions
ON THE EFFECTS OF alpha prime MARTENSITE IN HYDROGEN EMBRITTLEMENT OF A CATHODICALLY CHARGED AlSl TYPE 304 AUSTENITIC STAINLESS STEEL.
Fractographic characteristics of a hydrogen-charged AISI 316 type austenitic stainless steel
Tekniska barriärer
Kapsel
Dynamic Strain Ageing of Deformed Nitrogen-Alloyed AISI 316 Stainless Steels
Stress Corrosion Cracking
Properties of dissimilar joints between stainless steels and structural steels
Toughness properties of martensitic/ferritic stainless steels
Redistribution of alloying elements in electron-irradiated iron-based FCC alloys studied by hydrogen-probe mechanical spectroscopy
Conference proceedingsHydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu2017 ISBN: 9780791861387Hydrogen uptake and embrittlement susceptibility of ferrite pearlite pipeline steels
Todoshchenko, Olga Madelen Ingrid; Yagodzinskyy, Yuriy; Hänninen, Hannu2017 ISBN: 9780791861387Hydrogen effects on strain localization in FCC metals at the initial stage of plastic deformation
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Hänninen, Hannu2017 ISBN: 9780791861387Fracture mechanical and microstructural characterization of narrow-gap safe-end dissimilar metal weld
Ahonen, Matias; Mouginot, Roman; Lindqvist, S.; Sarikka, Teemu; Nevasmaa, Pekka; Ehrnstén, Ulla; Hänninen, Hannu2016 in VTT Technology (Teknologian tutkimuskeskus VTT Oy)ISBN: 978-951-38-8436-9ISSN: 2242-122XImproved Understanding of Varestraint Testing—Nickel-Based Superalloys
Andersson, Joel; Jacobsson, Jonny; Brederholm, Anssi; Hänninen, Hannu2016 ISBN: 978-3-319-28432-3Short-range ordering of Alloy 690 aged for 10 000 h at 420, 475 and 550 °C
Mouginot, Roman; Sarikka, Teemu; Ehrnstén, Ulla; Kim, Y.S.; Kim, S.S.; Hänninen, Hannu2016 in VTT Technology (Teknologian tutkimuskeskus VTT Oy)ISBN: 978-951-38-8436-9ISSN: 2242-122XFactors Affecting Low Temperature Crack Propagation (LTCP) Susceptibility of Nickel-Based Alloy 182, 82, 152 and 52 Weld Metals
Ahonen, Matias; Ehrnstén, Ulla; Saukkonen, Tapio; Todoshchenko, Olga; Hänninen, Hannu2015 ISBN: 978-1-926773-19-3Effect of heat treatment and cold work on the ordering of alloy 690 at 475°C
Mouginot, Roman; Sarikka, Teemu; Heikkilä, Mikko; Ehrnstén, Ulla; Kim, Young Suk; Kim, Sung Soo; Hänninen, Hannu2015 ISBN: 978-1-926773-19-3Fatigue strength of welded extra high-strength and thin steel plates
Remes, H.; Peltonen, M.; Seppänen, T.; Kukkonen, A.; Liinalampi, S.; Lillemäe, I.; Lehto, P.; Hänninen, H.; Romanoff, J.; Nummela, S.2015 ISBN: 978-1-138-02789-3The effect of microstructure on Low-Temperature Crack Propagation (LTCP) susceptibility of nickel-based Alloy 182, 152 and 52 weld metals in PWR primary water
Ahonen, Matias; Ehrnstén, Ulla; Saukkonen, Tapio; Todoshchenko, Olga; Hänninen, Hannu2014 Effect of strain on hydrogen solubility and trapping in AISI 316L austenitic stainless steel
Ganchenkova, Maria; Yagodzinskyy, Yuriy; Hänninen, Hannu2014 Effect of second pass in 2-sided FSW of high-strength structural steel
Luumi, Lauri; Santos Vilaca da Silva, Pedro; Sato, Yutaka S.; Hänninen, Hannu; Kokawa, Hiroyuki2014 Hydrogen effect of tensile properties of EUROFER 97 and ODS-EUROFER steels at elevated temperatures
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Ganchenkova, Maria; Emelyanova, O.; Saukkonen, Tapio; Hänninen, Hannu2014 Characterization of a Ni-base NG-DMW weld of modern PWR
Mouginot, Roman; Sarikka, Teemu; Brederholm, Anssi; Saukkonen, Tapio; Hänninen, Hannu2014 Effect of strength mismatch on fracture mechanical behavior of NG-DMW
Sarikka, Teemu; Ahonen, Matias; Karjalainen-Roikonen, Päivi; Brederholm, Anssi; Mouginot, Roman; Saukkonen, Tapio; Nevasmaa, Pekka; Hänninen, Hannu2014 Hydrogen-induced delayed fracture of high-strength carbon steels
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Saukkonen, Tapio; Hänninen, Hannu2014 Hydrogen-induced Strain Localization at Meso-scale in Austenitic Stainless Steels
Yagodzinskyy, Yuriy; Hänninen, Hannu2014 Hydrogen-induced strain localization in austenitic stainless steels and possible origins of their hydrogen embrittlement
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Saukkonen, Tapio; Hänninen, Hannu2014 Role of non-metallic inclusions in hydrogen-induced fracture of high-strength carbon steels
Yagodzinskyy, Yuriy; Todoshchenko, Olga; Saukkonen, Tapio; Hänninen, Hannu2014 Ageing degradation of a hard-facing alloy after long-time exposure to BWR conditions
Aaltonen, Pertti; Ehrnstén, Ulla; Karjalainen-Roikonen, Päivi; Autio, Juha-Matti; Saukkonen, Tapio; Hänninen, Hannu2013 Low temperature crack propagation (LTCP) susceptibility of nickel-based weld metals alloy 182, 152 and 52 in PWR primary water
Ahonen, Matias; Ehrnsten, Ulla; Saukkonen, Tapio; Todoshchenko, Olga; Hänninen, Hannu2013 Hydrogen Solubility and Trapping in AISI 316L Austenitic Stainless Steel
Ganchenkova, Maria; Todoshchenko, Olga; Yagodzinskyy, Yuriy; Hänninen, Hannu2013 Effect of strength mismatch and microstructure on mechanical properties of BWR dissimilar metal safe-end weld
Holmström, Petra; Sarikka, Teemu; Brederholm, Anssi; Karjalainen-Roikonen, Päivi; Saukkonen, Tapio; Toivonen, Aki; Nevasmaa, Pekka; Hänninen, Hannu2013 Hydrogen-induced Cracking of Oxygen-free Phosphorous-doped Copper
Hänninen, Hannu; Malitckii, Evgenii; Saukkonen, Tapio; Yagodzinskyy, Yuriy2013 Application of alloy 690 and associated weld metals in PWRs
Hänninen, Hannu2013 Hydrogen solubility and diffusion and its effects on plastic deformation in austenitic stainless steels
Hänninen, Hannu2013 Hydrogen uptake and its effect on tensile properties of Eurofer 97-2 and ODS-Eurofer steels
Malitckii, E.; Yagodzinskyy, Y.; Ganchenkova, M.; Saukkonen, T.; Hänninen, H.; Lindau, R.; Vladimirov, P.; Moeslang, A.2013 Fracture mechanical characterisation of ferrite-austenite dissimilar metal welds (DMWs) for elevated temperature service in view of metallurgical mis-match
Nevasmaa, Pekka; Holmström, Petra; Karjalainen-Roikonen, Päivi; Sarikka, Teemu; Ahonen, Matias; Mouginot, Roman; Ehrnsten, Ulla; Brederholm, Anssi; Aaltonen, Pertti; Hänninen, Hannu2013 Corrosion resistance of Kanthal A-1 and Fe-12Cr-2Si alloy coatings in Cl-containing environment
Sarikka, Teemu; Ilola, Risto; Pohja, Rami; Hänninen, Hannu2013 Intermartensite transformation in Ni50Mn25+xGa25-x alloys and its effect on twinning stress
Straka, Ladislav; Heczko, Oleg; Sozinov, Alexei; Hänninen, Hannu2013 ISBN: 978-966-491-465-6Hydrogen Solubility and Diffusion in Metastable Austenitic Stainless Steels Studied with Thermal Desorption Spectroscopy
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Papula, Suvi; Hänninen, Hannu2013 Effect of Alloy Composition and Temperature on Corrosion Behavior of Stainless Steels in Hot Alkaline Solutions
Vepsäläinen, M.; Pohjanne, P.; Romu, J.; Saukkonen, T.; Hänninen, H.; Heikkilä, M.; Ohligschläger, T.; Berg, C-G.; Pulliainen, M.2013 Influence of secondary flash formation on friction surfacing of high-strength steel substrate with AISI 316 consumable
Vilaça, Pedro; Hänninen, Hannu; Saukkonen, Tapio; Miranda, Rosa M.2013 Hydrogen Effects on Plastic Deformation of AISI 316LN Single Crystals
Yagodzinskyy, Yuriy; Malitckii, Evgenii; Saukkonen, Tapio; Hänninen, Hannu2013 Forced torsion pendulum for studies of interactions at solid-liquid interface
Yagodzinskyy, Yuriy; Straka, Ladislav; Hänninen, Hannu2013 ISBN: 978-966-491-465-6Improved Varestraint Testing by Modification of Sample Geometry
Andersson, J.; Jacobsson, J.; Sjöberg, G.; Brederholm, Anssi; Hänninen, Hannu2012 Stress Corrosion Cracking and Crack Tip Characterization of Alloy X-750 in Boiling Water Reactor Environments
Gibbs, Jonathan; Ballinger, Ronald; Jackson, John; Isheim, Dieter; Hänninen, Hannu2012 ISBN: 9781118132418Effect of Hot Cracks on EAC Crack Initiation and Growth in Nickel-base Alloy Weld Metals
Hänninen, Hannu; Toivonen, Aki; Brederholm, Anssi; Saukkonen, Tapio; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2012 ISBN: 9781118132418Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Sulfide Containing Alkaline Solutions
Leinonen, Heikki; Pohjanne, Pekka; Romu, Jyrki; Saukkonen, Tapio; Schildt, Tanja; Hänninen, Hannu2012 Effect of Alloy Composition on Stress Corrosion Cracking Susceptibility of Duplex Stainless Steels in Hot Alkaline Sulfide Solution
Leinonen, Heikki; Pohjanne, Pekka; Chasse, Kevin; Singh, Preet; Romu, Jyrki; Saukkonen, Tapio; Hänninen, Hannu2012 Effect of Thermal Aging on SCC, Material Properties and Fracture Toughness of Stainless Steel Weld Metals
Lucas, Timothy; Ballinger, Ronald; Hänninen, Hannu; Saukkonen, Tapio2012 ISBN: 9781118132418New Generation Ferritic and Duplex Stainless Steels: Preliminary Study on Mechanical and In-Service Properties of Base Materials and Welded Joints
Nevasmaa, Pekka; Sirén, Mika; Karjalainen-Roikonen, Päivi; Hirn, Justus; Romu, Jyrki; Hänninen, Hannu; Sieppi, Ville; Heikkinen, Hannu-Pekka; Manninen, Timo; Säynäjäkangas, Jukka2012 Plastic Strain and Residual Stress Distributions in AISI 304 Stainless Steel Power Plant Pipe Welds
Saukkonen, Tapio; Aalto, Miikka; Virkkunen, Iikka; Ehrnsten, Ulla; Hänninen, Hannu2012 ISBN: 978-1-118-13241-8Role of Excessive Vacancy Generated in p-n Type Duplex Cu2O Film under Anodic Bias in TGSCC of Pure Copper
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Kilpeläinen, Simo; Tuomisto, Filip; Hänninen, Hannu2011 Metallurgical Response of Electron Beam Welded Allvac® 718Plus™
Andersson, Joel; Sjöberg, Göran; Hänninen, Hannu2011 ISBN: 978-3-642-16863-5Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnstén, Ulla; Aaltonen, Pertti2011 Effect of Selective Dissolution on Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions
Leinonen, Heikki; Pohjanne, Pekka; Saukkonen, Tapio; Schildt, Tanja; Romu, Jyrki; Hänninen, Hannu2011 Effect of Sodium Sulphide Addition on Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions
Romu, Jyrki; Saukkonen, Tapio; Schildt, Tanja; Hänninen, Hannu; Leinonen, Heikki; Pohjanne, Pekka2011 Plastic strain and residual stress distributions in an AISI 304 stainless steel BWR pipe weld
Saukkonen, Tapio; Aalto, Miikka; Virkkunen, Iikka; Ehrnstén, Ulla; Hänninen, Hannu2011 ISBN: 9781118132418Ni-Mn-Ga single crystals with very low twinning stress
Straka, Ladislav; Hänninen, Hannu; Soroka, Aleksandr; Sozinov, Alexei2011 in Journal of Physics: Conference Series (IOP PUBLISHING LTD)ISSN: 1742-6588Evaluation of Post-Weld Heat Treatment as a Method to Prevent Stress Corrosion Cracking of Carbon Steel in Ethanol by Notched Constant Tensile Load Testing
Torkkeli, Janne; Hirsi, Kalle Valtteri; Saukkonen, Tapio; Hänninen, Hannu2011 Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption and Mechanical Loss Spectroscopy
Yagodzinskyy, Yuriy; Todoshchenko, Olga; Ivanchenko, Mykola; Papula, Suvi; Hänninen, Hannu2011 ISBN: 9789081794206Environment-Assisted Cracking and Hot Cracking of Ni-Base Alloy Dissimilar Metal Welds
Aaltonen, Pertti; Hänninen, Hannu; Brederholm, Anssi; Toivonen, Aki; Ehrnstén, Ulla2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Low Temperature Crack Propagation of Nickel-based Weld Metals in Hydrogenerated PWR Primary Water
Ahonen, Matias; Ehrnstén, Ulla; Hänninen, Hannu2010 Effect of Hydrogenated Low Temperature Water on Fracture Toughness of Nickel-Based Weld Metals
Ahonen, Matias; Ehrnstén, Ulla; Hänninen, Hannu2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Thermoplastic Wire Drawing from Bulk Metallic Glass
Bossuyt, Sven; Soinila, Erno; Penttinen, Henri; Pulkki, Ville; Hänninen, Hannu2010 Development of Materials for Nuclear Power Plants
Hänninen, Hannu2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel
Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2010 in VTT Symposia (VALTION TEKNILLINEN TUTKIMUSKESKUS)ISBN: 978-951-38-7591-6ISSN: 0357-9387Hydrogen solubility and diffusion in austenitic and duplex stainless steels studied with thermal desorption spectroscopy
Todoshchenko, Olga; Yagodzinskyy, Yuriy; Hänninen, Hannu2010 Deformation Localisation and EAC Inhomogenous Microstructures of Austenitic Stainless Steels
Ehrnstén, Ulla; Saukkonen, Tapio; Hänninen, Hannu2009 EAC Crack Initiation in Nickel-Based Dissimilar Metal Welds Using Doped Steam Test
Hänninen, Hannu; Toivonen, Aki; Saukkonen, Tapio; Brederholm, Anssi; Aaltonen, Pertti; Ehrnstén, Ulla2009 Dynamic Strain Aging of NI-Base Weld Metals in Comparison to Alloy 600 and 690
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Ehrnstén, Ulla; Hänninen, Hannu2009 Optical Strain Measurement of Plastic Strain Localization in Nuclear Waste Copper Canisters
Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2009 Bulk metallic glass coating of polymer substrates
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2009 in Journal of Physics: Conference Series (IOP PUBLISHING LTD)ISSN: 1742-6588Solidification Cracking of Alloy Allvac 718Plus and Alloy 718 at Transvarestraint Testing
Andersson, Joel; Sjöberg, G.; Brederholm, Anssi; Hänninen, Hannu2008 in EPD Congress (MINERALS, METALS & MATERIALS SOCIETY)ISBN: 978-0-87339-715-5ISSN: 1079-7580Hot Cracking of Allvac 718Plus, Alloy 718 and Waspaloy at Varestraint Testing
Andersson, Joel; Sjöberg, G.; Viskari, L.; Brederholm, Anssi; Hänninen, Hannu; Knee, Christopher S.2008 Trends in Forming and Welding of Stainless Steels
Hänninen, Hannu; Romu, Jyrki2008 ISBN: 91-974131-9-4Hot Cracking Susceptibility of Inconel Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio2008 Hot cracking susceptibility of ni-base alloy dissimilar metal welds
Hänninen, Hannu; Brederholm, A.; Saukkonen, T.2008 ISBN: 9783540786276Photocatalytic Activity of Atomic Layer Deposited (ALD) TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys
Ilola, R.; Kawakami, H.; Straka, L.; Papula, S.; Romu, J.; Hänninen, Hannu; Mahlberg, R.; Heikkilä, M.2008 Microstructure and Plastic Strain Distribution of an AISI 304 Stainless Steel Power Plant Pipe Weld Studied by EBSD
Saukkonen, Tapio; Ehrnstén, Ulla; Hänninen, Hannu2008 Microstructure and Texture Analysis of Friction Stir Welds of Copper
Saukkonen, Tapio; Savolainen, Kati; Mononen, Jukka; Hänninen, Hannu2008 in Ceramic Transactions (The American Ceramic Society)ISBN: 9780470408346ISSN: 1042-1122EBSD Lessons from Various Plastic Strain Mapping Cases
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2008 Entrapped Oxide Particles in Copper Friction Stir Welds
Savolainen, Kati; Saukkonen, Tapio; Mononen, Jukka; Hänninen, Hannu2008 ISBN: 978-903761-06-9Static Strain Ageing of Metastable Austenitic Stainless Steel
Talonen, Juho; Hänninen, Hannu2008 ISBN: 91-974131-9-4Effect of Hydrogen on Plastic Strain Localization in Single Crystals of Nickel and Austenitic Stainless Steel
Yagodzinskyy, Yuriy; Saukkonen, T.; Tuomisto, Filip; Barannikova, Svetlana; Zuev, Lev; Hänninen, Hannu2008 ISBN: 978-1-61503-003-3Hydrogen-induced Cracking of Metastable Austenitic Stainless and High-Strength Carbon Steels
Yagodzinskyy, Yuriy; Saukkonen, T.; Andronova, E. ; Rissanen, L.; Hänninen, Hannu2008 ISBN: 978-1-61503-003-3Environment-Assisted Cracking and Hot Cracking of Ni-base Alloy Dissimilar Metal Welds
Hänninen, Hannu; Toivonen, Aki; Brederholm, Anssi; Saukkonen, Tapio; Ehrnstén, Ulla; Aaltonen, Pertti2007 Characterization of Solute Redistribution and Microstructural Development in Ni-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio2007 Environmentally Assisted Cracking of Cold-worked Stainless Steels Mechanistic Point of Wiew
Hänninen, Hannu; Ehrnstén, Ulla; Talonen, Juho2007 Structural Damage of Aluminum Alloy 6082 Determined by Nonlinear Elastic Wave Modulation Spectroscopy
Straka, Ladislav; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 ISBN: 84-87985-12-2Effects of Straining on Oxide Films and Passivity of Copper in Nitrite Solution at Ambient Temperature
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 ISBN: 0-444-52224-7Dynamic Strain Ageing and EAC of Deformed Nitrogen-alloyed AISI 316 Stainless Steels
Ehrnstén, Ulla; Ivanchenko, Mykola; Nevdacha, Vitaly; Yagodzinskyy, Yuriy; Toivonen, Aki; Hänninen, Hannu2006 Dynamic Strain Aging of Ni-base Alloys Inconel 600 and 690
Hänninen, Hannu; Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Nevdacha, Vitaly; Ehrnstén, Ulla; Aaltonen, Pertti2006 FSW of PH 15-7 Stainless Steel Sheet
Mononen, Jukka; Hänninen, Hannu2006 A Preliminary Study on Friction Stir Welding of Dissimilar Metal Joints of Copper and Aluminium
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu2006 Effect of Temperature on Tensile Behaviour and Microstructural Evolution of Nitrogen Alloyed Austenitic Stainless Steel
Talonen, Juho; Taulavuori, Tero; Hänninen, Hannu2006 ISBN: 7-5024-4079-8Electrochemical Potential Oscillations During Galvanostatic Passivation of Copper in NaNO2 Solution and their Role in TGSCC Mechanism
Yagodzinskyy, Yuriy; Aaltonen, Pertti; Hänninen, Hannu2006 ISBN: 0-444-52224-7Comparative Study of Nitrogen and Carbon Effects on Mechanism of Reversion of a´ Martensite to Austenite in Metastable AISI 301 Steel Grades
Yagodzinskyy, Yuriy; Saukkonen, Tapio; Romu, Jyrki; Hänninen, Hannu2006 ISBN: 7-5024-4079-8Effect of Forming Temperature and Cooling Rate on Superplastic Formability and Corrosion Resistance of EN 1.4162 Duplex Stainless Steel
Romu, Jyrki; Yagodzinskyy, Yuriy; Papula, Suvi; Beck, W.; Hänninen, Hannu2005 Mechanical and Electrical Properties of CNT/copper Nanocomposites Processed by Hot Pressing
Yagodzinskyy, Yuriy; Romu, Jyrki; Hänninen, Hannu2005 Hydrogen-Dislocation Interactions and their Role in HELP Mechanism of Hydrogen Embrittlement
Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Surface Contamination on Stainless Steel in Paper Machine Environment
Carpén, L.; Papula, Suvi; Leino, T.; Pohjanne, Pekka; Stenius, P.; Hänninen, Hannu2004 Application and Performance of High Nirogen Steels
Hänninen, Hannu2004 Kopparkapslar ?Tillverkning, Förslutsning, Beständighet
Hänninen, Hannu2004 Dynamic Strain Ageing of Nitrogen-alloyed AISI 316L Stainless Steel
Ivanchenko, Mykola; Ehrnstén, Ulla; Nevadacha, Vitaly; Yagodzinskyy, Yuriy; Hänninen, Hannu2004 Hitsaamon pienhiukkaset
Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2004 Determination of Fine Particles in Welding Fumes
Kasurinen, Heikki; Hänninen, Hannu; Koskinen, A.; Hämeri, K.; Lähde, T.; Ukkonen, A.2004 Advanced Flaw Manufacturing and Crack Growth Control
Kemppainen, M.; Pitkänen, J.; Virkkunen, Iikka; Hänninen, Hannu2004 ISBN: 0-7354-0173-XSuperplastic Forming of LDX 2101 (EN 1.4162) Duplex Stainless Steel
Romu, Jyrki; Yagodzinskyy, Yuriy; Beck, W.; Hänninen, Hannu2004 Design of the Grain Structure in Copper by Friction Stir Processing
Saukkonen, Tapio; Savolainen, Kati; Mononen, Jukka; Hänninen, Hannu2004 Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2004 Static Strain Aging of Cold-worked Austenitic Stainless Steel
Talonen, Juho; Nenonen, Pertti; Hänninen, Hannu2004 Effect of Thermal Stresses along Crack Surface on Ultrasonic Response
Virkkunen, Iikka; Kemppainen, Mika; Pitkänen, Jorma; Hänninen, Hannu2004 ISBN: 0-7354-0173-XNitrogen and Carbon Effects on Mechanisms of Reversion of Martensite to Austenite in Metastable AISI 301 Steel Grades and Their Hot Formability
Yagodzinskyy, Yuriy; Romu, Jyrki; Nenonen, Pertti; Hänninen, Hannu2004 Vacancy Generation in Electrochemical Oxidation/Dissolution of Copper in NaNo2 Solution and its Role in SCC Mechanism
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Tarasenko, O.; Hänninen, Hannu2003 ISBN: 0-87339-501-8Vacancy generation in electrochemical oxidation / dissolution of copper in NaNO2 solutions and its role in SCC mechanism
Aaltonen, Pertti; Yagodzinskyy, Yuriy; Tarasenko, Oleksandr; Hänninen, Hannu2003 Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Hänninen, Hannu2003 Summary of Recent Research on N-alloying of Steels in Finland
Hänninen, Hannu; Talonen, Juho; Romu, Jyrki; Leinonen, Heikki; Laitinen, Arttu; Korhonen, Mika2003 Hydrogen Interactions with 2.25Cr and 9Cr Steels
Hänninen, Hannu; Yagodzinskyy, Yuriy; Tarasenko, O.; Castello, P.; Schosger, J.-P.2003 ISBN: 0-87339-501-8Role of Dynamic Strain Aging in Environment Sensitive Cracking of Low Alloy and Stainless Steels in LWRs
Hänninen, Hannu2003 Effects of dynamic strain aging on environment-assisted cracking of low alloy pressure vessel and piping steels
Hänninen, Hannu; Seifert, Hans Peter; Yagodzinskyy, Yuriy; Ehrnstén, Ulla; Tarasenko, O.; Aaltonen, Pertti2003 in VTT Symposia (VTT)ISBN: 951-38-6280-1ISSN: 0357-9387Main Working Principles of Nuclear Reactors: Materials Science.
Hänninen, Hannu2003 Production of Realistic Flaw in Inconel 600
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Hukkanen, Kari; Hänninen, Hannu2003 Stress corrosion cracking and life prediction of austenitic stainless steels in calcium chloride solution
Leinonen, H.; Virkkunen, I.; Hänninen, Hannu2003 ISBN: 0873395018Experimental Investigations Concearning the Possible Effect of Dynamic Strain Aging on Environmentally-Assisted Cracking of Low Alloy Steels in Oxygenated High-Temperature Water
Roth, Armin; Hänninen, Hannu; Brümmer, Günther; Wachter, Otto; Ilg, Ulf; Widera, Martin; Hoffman, Harald2003 Investigation of Dynamic Strain Aging Effects of Low Alloy Steels and their Possible Relevance for Environmentally-Assisted Cracking in Oxygenated High-Temperature Water
Roth, Armin; Hänninen, Hannu; Brümmer, Günther; Wachter, Otto; Ilg, Ulf; Widera, Martin; Hoffman, Harald2003 Effect of Strain and Strain Rate on the Electric Properties of the Oxide Film Growing on an Austenitic Stainless Steel in Simulated BWR Conditions
Takeda, Yoichi; Bojinov, Martin; Hänninen, Hannu; Kinnunen, Petri; Laitinen, Timo; Mäkelä, Kari; Saario, Timo; Sakaguchi, K.; Shoji, T.; Sirkiä, Pekka; Toivonen, Aki2003 Effect of Strain on Electric Properties of Oxide Films Growing on AISI 316L Steel in Simulated BWR Conditions
Takeda, Yoichi; Bojinov, Martin; Hänninen, Hannu; Kinnunen, Petri; Laitinen, Timo; Mäkelä, Kari; Saario, Timo; Sakaguchi, K.; Shoji, T.; Sirkiä, Pekka; Toivonen, Aki2003 The Effect of Plastic Deformation on Damping Properties of Austenitic Stainless Steels
Talonen, Juho; Hänninen, Hannu2003 Thermal Fatigue In NDE Artificial Flaw Manufacturing for LWR Applications
Virkkunen, Iikka; Kemppainen, Mika; Hänninen, Hannu2003 Effect of Hydrogen on Plastic Deformation of Stable 18Cr-16Ni-10Mn Austenitic Stainless Steel Single Crystals
Yagodzinskyy, Yuriy; Tarasenko, O.; Hänninen, Hannu2003 ISBN: 0-87339-501-8Interactions of Hydrogen in Copper Studied by Internal Friction Method
Aaltonen, Pertti; Nevdacha, Vitaliy; Tarasenko, O.; Yagodzinskyy, Youri; Hänninen, Hannu2002 Dwell time effects on fatigue life and damage mechanisms
Goswami, Tarun; Krohn, J.; Hänninen, Hannu2002 Ydinvoimalaitosten painelaitteiden, putkistojen ja höyrynkehittimien rakenteet ja materiaalit
Hänninen, Hannu2002 Realistic Cracks for In-Service Inspection Qualification Mock-ups
Kemppainen, Mika; Virkkunen, Iikka; Pitkänen, Jorma; Paussu, Rami; Hänninen, Hannu2002 Hydrogen Mechanical Spectroscopy Study of Atomic Ordering in Inconel 939 Alloy
Kemppainen, Mika; Nevdacha, Vitaliy; Yagodzinskyy, Yurii; Hänninen, Hannu2002 Stress Corrosion Cracing and Life Prediction of Austenitic Stainless Steels in Calcium Chloride Solution
Leinonen, Heikki; Virkkunen, Iikka; Hänninen, Hannu2002 Cost comparison of FSW and MIG welded aluminium panels
Mononen, Jukka; Hänninen, Hannu2002 Superplasticity and Superplastic Forming in Finland - Recent Advancements and Future Prospects
Pimenoff, Joe; Romu, Jyrki; Yagodzinskyy, Yuouri; Hänninen, Hannu2002 Thermal Fatigue and NDE Qualification Applications
Virkkunen, Iikka; Kemppainen, Mika; Hänninen, Hannu2002 Intergranular Cracking of AISI 316NG Stainless Steel in BWR Environment
Ehrnsten, Ulla; Aaltonen, Pertti; Nenonen, Pertti; Hänninen, Hannu; Jansson, Christer; Angeliu, Thomas2001 Cracking of recovery boiler composite tubes - thermal fatigue or stress corrosion cracking ?
Hänninen, Hannu; Pohjanne, Petri; Saarinen, Pekka; Kiesi, T.2001 Effects of Dynamic Strain Aging on Environment-Assisted Cracking of Low Alloy Pressure Vessel and Piping Steels
Hänninen, Hannu; Yagodzinskyy, Youri; Tarasenko, O.; Seifert, Hans-Peter; Ehrnsten, Ulla; Aaltonen, Pertti2001 Modelling of material ageing
Jagodzinski, Yu.; Hänninen, Hannu2001 in VTT SYMPOSIA (VTT)ISBN: 951-38-5727-1ISSN: 0357-9387New HIPed Powder Metallurgy Super Duplex Stainless Steel Suction Roll Shells with Excellent Corrosion and Fatigue Properties for Paper Machine Applications
Korhonen, Mika; Hänninen, Hannu; Laitinen, Arttu; Hämäläinen, E.; Heikkinen, J.; Liimatainen, J.2001 Superplastic Forming of Commercial Grade Aluminium and Stainless Steel Sandwich Panels
Pimenoff, Joe; Yagodzinskyy, Youri; Romu, Jyrki; Hänninen, Hannu2001 Commercial Grade Aluminium and Stainless Steel Sandwich Panels - Preparation, Superplastic Forming and Post-Formed Properties
Pimenoff, Joe; Yagodzinskyy, Youri; Romu, Joe; Hänninen, Hannu2001 Advanced Composite Tube Materials for Lower Furnace in Black Liquor Recovery Boilers
Pohjanne, Petri; Saarinen, Pekka; Mäkipää, M.; Oksa, M.; Hänninen, Hannu2001 Effects of secondary phase precipitation on corrosion properties of duplex stainless steels
Smuk, Sergiy; Nenonen, P.; Hänninen, Hannu2001 Load Sharing in Duplex Stainless Steels Determined by Barkhausen Noise
Virkkunen, Iikka; Gripenberg, Hans; Hänninen, Hannu; Vilpas, Martti2001 Mechanical Properties of Austenitic High Nitrogen Steels at Elevated Temperatures
Ilola, R.; Kemppainen, M.; Hänninen, Hannu2000 ISBN: 0-08-042815-0Manufacturing aluminium sandwich structures by means of superplastic forming
Impiö, P.; Pimenoff, J.; Hänninen, Hannu; Heinäkari, M.2000 in MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS (MATERIALS RESEARCH SOCIETY)ISBN: 1-55899-509-9ISSN: 0272-9172Fatigue Behaviour of Calcium-treated and Non-Calcium-Treated AlSl 8620 Carburizing Steel
Juvonen, P.; Hänninen, Hannu2000 Fatigue behaviour of calcium-treated and non-calcium-treated AISI 8620 carburizing steel
Juvonen, P.; Hänninen, Hannu2000 ISBN: 0-08-042815-0A Powder-Metallurgy Approach to Fabricating a Nitrogen-Gradient Structure for Multi-Material Biomedical Implants
Karlsen, W.; Hänninen, Hannu2000 Narrow Gap GTA Welding of P/M Super Duplex Stainless Steels
Korhonen, M.; Luukas, M.; Hänninen, Hannu2000 Narrow Gap GTA Welding of P/M Super Duplex Stainless Steels
Korhonen, M.; Luukas, M.; Hänninen, Hannu; Liimatainen, J.2000 Carbide Containing Metal Matrix Composite Coatings Produced by PTAW Method
Luukas, M.; Hänninen, Hannu2000 Fatigue Strength of Plasma Arc-, Tandem MiG- and Friction Stir Butt Welds in 5083 and 6082 Aluminium Alloys
Mononen, J.; Hänninen, Hannu; Haagensen, P.J.2000 Drilling and tapping of hard tempered steels
Paro, J.; Hänninen, Hannu; Kauppinen, V.2000 Drilling of hiped P/M and conventional duplex stainless steels
Paro, JA; Hänninen, Hannu; Kauppinen, VA2000 ISBN: 9985894219Tool wear and machinability of hipped P/M and conventional duplex stainless steels
Paro, Jukka; Hänninen, Hannu; Kauppinen, V.2000 Tool wear and machinability of hipped P/M and conventional cast duplex stainless steels
Paro, J.; Hänninen, Hannu; Kauppinen, V.2000 in VTT SYMPOSIA (VTT)ISBN: 951-38-5278-4ISSN: 0357-9387Thermal Fatigue of New Composite Tube Materials
Saarinen, Pekka; Hänninen, Hannu; Nenonen, P.2000 ISBN: 0-89852-971-9The Inner and Outer Surface Cracking of the Recovery Boiler Floor Tubes
Saarinen, P.; Hänninen, Hannu; Tuiremo, J.; Salmi, K.2000 ISBN: 0-89852-971-9Study of the Mechanisms of the Secondary Phase Precipitation in P/M-HIP Super Stainless Steels
Smuk, S.; Smuk, O.; Nenonen, P.; Hänninen, Hannu2000 Internal Friction Study of Phase Transformations and Hydrogen Effects in Super duplex stainless Steels
Smuk, O.; Hänninen, Hannu; Yagodzinskyy, Yu.; Tarasenko, O.; Smuk, S.2000 ISBN: 0-08-042815-0Effects of Copper on Precipitation of Secondary Phases in Duplex Stainless Steels
Smuk, O.; Nenonen, P.; Hänninen, Hannu; Liimatainen, J.2000 ISBN: 0-08-042815-0Thermal Fatigue of Duplex Stainless Steels
Virkkunen, I.; Hänninen, Hannu2000 Study of Hydrogen Diffusion in P/M-HIP SAF 2507 Super Duplex Stainless Steel by the Internal Friction Method
Yagodzinskyy, Yu.; Smuk, O.; Tarasenko, O; Smuk, S.; Hänninen, Hannu2000 Effect of Recrystallisation Annealing on Grain Refinement for Superplastic Forming of Cold Rolled AA 5083 Aluminium Base Alloy
Yagodzinskyy, J.; Pimenoff, J.; Romu, J.; Tarasenko, O.; Hänninen, Hannu2000 Laser beam welded stainless steel sandwich panels
Alenius, M.; Vilpas, M.; Hänninen, H.1999 Mikä on vaurio, milloin tarvitaan vaurioanalyysiä
Hänninen, H.1999 Corrosion properties of HNS
Hänninen, H.1999 Materiaalien ominaisuudet
Hänninen, H.1999 Dynamic Strain Ageing of Austenitic High Nitrogen Cr-Mn Steels
Ilalo, R.; Kemppainen, M.; Hänninen, H.1999 Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steels studied by means of internal friction
Jagodzinski, Yu.; Smuk, S.; Tarasenko, A.; Hänninen, H.1999 Interaction of nitrogen with diislocations studied by means of amplitude-dependent internal friction
Jagodzinski, Yu.; Tarasenko, A.; Smuk, S.; Hänninen, H.1999 Norrow gap GTA welding of stainless steels
Korhonen, M.; Luukas, M.; Hänninen, H.1999 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCl_2 solution
Leinonen, H.; Hänninen, H.1999 Tool wear and machinability of X5 CrMnN 18 18 stainless steels
Paro, Jukka; Hänninen, H.; Kauppinen, V.1999 Comparison of hydrogen effects on alloy 600 and 690
Smuk, S.; Hänninen, Hannu; Jagodzinski, Yu; Tarasenko, O.; Aaltonen, P.1999 ISBN: 0873394755Redistribution of Alloying Elements in Electron-Irradiated Iron-Based FCC Alloys Studied by Hydrogen-Probe Mechanical Spectrosscopy
Smuk, S.; Hänninen, H.; Jagodzinski, Y.; Tarasenko, O.1999 Fracture toughness and internal friction of GlidCop®Al-25 alloy
Tähtinen, S.; Pyykkönen, M.; Smuk, S.; Hänninen, Hannu; Jagodzinski, Y.; Tarasenko, O.1999 in MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS (MATERIALS RESEARCH SOCIETY)ISBN: 1-55899-446-7ISSN: 0272-9172Fracture Toughness and Internal Friction of CuAL25 Alloy
Tähtinen, S.; Pyykkönen, M.; Smuk, S.; Hänninen, H.; Jagodzinski, Y.; Tarasenko, O.1999 The role of nitrogen improving pitting corrosion resistance of high-alloy austenitic stainless steel welds
Vilpas, M.; Hänninen, H.1999 Thermal fatigue crack growth in austenitic stainless steels
Virkkunen, Iikka; Kemppainen, M; Hänninen, Hannu1999 ISBN: 7-04-007582-2Modelling of environmentally assisted cracking
Aaltonen, P.; Saario, T.; Hänninen, H.; Piippo, J.; Ehrnsten, U.; Itäaho, M.1998 Corrosion properties of HNS
Hänninen, H.1998 Dynamic Stain Ageing of Austenitic High Nitrogen Cr-Ni and Cr-Mn Steels
Ilola, R.; Kemppainen, M.; Hänninen, H.1998 Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steel studied by means of internal friction
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Nominal stress range of stainless steels fillet welds
Lahti, K.; Niemi, E.; Hänninen, H.1998 Nominal stress range fatigue of stainless steel fillet welds
Lahti, KE; Niemi, E; Hänninen, Hannu1998 ISBN: 90-5809-001-9Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
Romu, Jyrki; Hänninen, H.1998 The role of nitrogen in improving pitting corrosion resistance of high-alloy austenitic stainless steel welds
Vilpas, M.; Hänninen, H.1998 Influence of hydrogen changing on mechanical behaviour of Inconel-600 alloy measured by internal friction
Aaltonen, P.; Jagodinski, Y.; Tarasenko, A.; Smouk, S.; Hänninen, H.1997 Influence of hydrogen charging on mechanical behaviour of Inconel-600 alloy measured by internal friction
Aaltonen, P; Jagodzinski, Y; Tarasenko, A; Smouk, S; Hänninen, Hannu1997 ISBN: 0-89448-626-8Hydrogen interaction with dislocations in austenitic AISI 310 stainless steel
Amouk, S.; Hänninen, H.; Tarasenko, A.1997 Environmentally Assisted Cracking of Alloy 600 in PWR Primary Water
Ehrnsten, U.; Lagerström, J.; Saario, T.; Piippo, J.; Aaltonen, P.; Tähtinen, S.; Laitinen, T.; Hänninen, H.1997 Corrosion properties of HIPed P/M duplex stainless steels
Hämäläinen, E.; Korhonen, M.; Hänninen, H.; Liimatainen, J.1997 Combound teräkset
Hänninen, H.1997 Stress corrosion cracking, corrosion fatigue, irradiation assisted stress corrosion cracking and irradiation embrittlement
Hänninen, H.1997 Ferriittisten niukkahiilisten 12 % kromiterästen hitsaus ja liitosten mekaaniset ominaisuudet
Hänninen, H.1997 Projektin "Ruostumattomien terästen käyttö kuljetusvälineissä" esittely
Hänninen, H.1997 Model for environmentally assisted cracking of alloy 600 in PWR primary water
Lagerstrom, J; Ehrnsten, U; Saario, T; Hänninen, Hannu1997 ISBN: 0-89448-626-8The use of stainless steels in welded vehicle structures
Lahti, K.; Vilpas, M.; Kyröläinen, A.; Hänninen, H.1997 Prediction of stress corrosion cracking susceptibility of stainless steels in 50 % CaCl2 solution
Leinonen, H.; Hänninen, H.1997 Prediction of stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50 % CaCl2 solution
Leinonen, H.; Saario, T.; Hänninen, H.1997 Drilling of P/M produced stainless steels by using TiN-coated high speed steel tools.
Paro, J.; Hänninen, H.; Kauppinen, V.1997 Corrosion and mechanical properties of nitrogen alloyed P/M HIP austentic stainless steels
Romu, J.; Tervo, J.; Hänninen, H.1997 Slow strain rate testing of corrosion resistant alloys in high temperature H_(2)S environments
Saarinen, K.; Hämäläinen, E.; Hänninen, H.1997 SSC resistance oh HIPed P/M super duplex stainless steels in sour H_(2)S environments
Saarinen, K.; Hänninen, H.; Hämäläinen, E.; Liimatainen, J.1997 Properties of P/M High Nitrogen Austenitic and Duplex Stainless Steels
Tervo, J.; Romu, J.; Hämäläinen, E.; Hänninen, H.; Liimatainen, J.1997 Properties of Fe-Al-Si- High-Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1996 Properties of Fe-Al-Si high-damping steel
Aaltio, Ilkka; Ullakko, Kari; Hänninen, Hannu1996 ISBN: 0819420956Vacancy-Creep Model for EAC of Metallic Materials in High Temperature Water
Aaltonen, P.; Saario, T.; Karjalainen-Roikonen, P.; Piippo, J.; Tähtinen, S.; Itäaho, M.; Hänninen, H.1996 Selective Dissolution - Vacancy - Creep Model For EAC of Brass
Aaltonen, P.; Saario, T.; Ehrnstén, U.; Itäaho, M.; Hänninen, H.1996 Mechanical Properties of Cold-Rolled AISI 304LN Steel at Low Temperatures
Ilola, R.; Hänninen, H.; Heinäkari, M.1996 Properties of Submerged Arc Welded TMCP-steel Weldments
Kotamies, J.; Brederholm, A.; Hänninen, H.1996 Stainless Steel in a Bus Frame
Lahti, K.; Vilpas, M.; Kyröläinen, A.; Lokka, M.; Hänninen, H.1996 Corrosion Resistance of Stainless Steel Welds in Vehicle Applications
Lahti, K.; Vilpas, M.; Kyröläinen, A.; Hänninen, H.1996 Prediction of Stress Corrosion Cracing Susceptibility of Austenitic Stainless Steels in 50 % CaCl2 Solution
Leinonen, H.; Hänninen, H.1996 Hydrogen Interaction with Dislocations in Austenitic AISI 310 Stainless Steels
Smouk, S.; Hänninen, H.; Tarassenko, A.1996 Welding of Low-carbon 12 % Cr Stainless Steels with Austenitic Consumables - Fracture Toughness and Fatigue of Welded Joints
Vilpas, m.; Lokka, M.; Planman, t.; Lahti, K.; Hänninen, H.1996 Fracture Toughness and Fatigue Properties of Welded Stainless Steels used in Transport Vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Kyröläinen, A.; Hänninen, H.1996 Welding and properties of welds of TMCP-Steel
Brederholm, Anssi; Kotamies, J.M.N.; Hänninen, Hannu1995 ISBN: 0-87170-555-9Internal Friction in Hydrogen-Charged CrNi and CrNiMn Austenitic Stainless Steels, Hydrogen Transport and Cracking in Materials
Guvriljuk, V.G.; Hänninen, Hannu; Smouk, S.Y.; Tarasenko, A.V.; Ullakko, K.1995 Teräkset
Hänninen, H.1995 Duplex-terästen käyttöalueet, mahdollisuudet, ominaisuudet ja kehitysnäkymät
Hänninen, H.1995 Cracking and corrosion in black liquor recovery boilers
Hänninen, Hannu; POHJANNE, P; NIEMINEN, P1995 in VTT SYMPOSIA (Technical Research Centre of Finland)ISBN: 951-38-4542-7ISSN: 0357-9387Cracking and Corrosion Problems in Black Liquor Recovery Boilers
Hänninen, H.; Pohjanne, P.; Nieminen, P.1995 Materiaalin valinnan asiantuntijäjärjestelmät
Hänninen, H.1995 Mechanical Properties of Austenitic High-Nitrogen Cr-Ni and Cr-Mn Steels at Low Temperatures
Ilola, R.; Hänninen, H.; Ullakko, K.1995 Isothermal Martensitic Transformation as an Internal-Stress-Increasing Process
Liu, Y.; Xie, Z.; Hänninen, H.; van Humbeeck, J.; Pietikäinen, J.1995 Development of Properties of P/M Austenitic Stainless Steels by Nitrogen Infusion
Romu, Jyrki; Tervo, J.; Hänninen, H.; Liimatainen, J.1995 Selective Dissolution - Vacancy - Creep Model for IGSCC of Alloy 600
Saario, T.; Aaltonen, P.; Karjalainen-Roikonen, P.; Piippo, J.; Mäkelä, K.; Tähtinen, S.; Hänninen, H.1995 Stabilization of Austenite Associated with prior Formation of Martensite
Xie, Z.; Liu, Y.; Hänninen, H.1995 Water Chemistry and Materials Behaviour in PWR's and BWR's
Aaltonen, P.; Hänninen, H.1994 Application of a multipotential test method for rapid screening of austenitic stainless steels in process environments
Aaltonen, Pertti A.; Pohjanne, Pekka K.; Tahtinen, Seppo J.; Hänninen, Hannu1994 in AMERICAN SOCIETY FOR TESTING AND MATERIALS SPECIAL TECHNICAL PUBLICATION (AMERICAN SOCIETY FOR TESTING AND MATERIALS)ISBN: 0803118538ISSN: 1071-5827Properties of Nitrogen Alloyed P/M Duplex Stainless Steels
Hämäläinen, E.; Laitinen, A.; Hänninen, H.; Liimatainen, J.1994 Properties of Nitrogen Alloyed P/M + HIP Duplex Stainless Steels
Hämäläinen, E.; Laitinen, A.; Hänninen, H.; Liimatainen, J.1994 Failures of Stainless Steel Components, 6.Jahrestagung Schadensanalyse: Nichtrostende Stähle im Kraftwerks- und Anlagenbau
Hänninen, H.1994 Cracking and Corrosion Problems in Black Liquor Recovery Boilers
Hänninen, H.1994 Materiaalin valinnan asiantuntijajärjestelmät, Vaativien rakenteiden materiaalitekniikka
Hänninen, H.1994 Welding of Stainless Steels for Transport Industries
Hänninen, H.; Nordberg, H.; Johansson, L.; Hertzmann, S.; Fostervoll, H.; Lokka, M.; Vilpas, M.1994 Corrosion Risks Associated with Changing Environmental Conditions for Stainless Steels
Hänninen, H.1994 Active Wear and Failure Mechanisms of TiN Coated HSS and TiN Coated Cemented Carbide Tools when Machining HIPed Stainless Steels
Jiang, L.; Hänninen, H.; Paro, J.; Kauppinen, V.1994 Active Wear and Failure Mechanisms of TiN-Coated HSS and TiN-Coated Cemented Carbide Tools when Machining HIPped Stainless Steels
Liang, L.; Hänninen, H.; Paro, J.; Kauppinen, V.1994 Sliding Wear of High Nitrogen Austenitic Stainless Steel
Tervo, J.; Ylöstalo, O.; Hänninen, H.; Liimatainen, J.1994 Sliding Wear of High Nitrogen Austenitic Stainless Steels
Tervo, J.; Ylöstalo, O.; Hänninen, H.; Liimatainen, J.1994 Water Chemistry and Materials Degradiation in LWR's
Törrönen, K.; Aaltonen, P.; Hänninen, H.1994 Phase Transformations and Relaxation Phenomena Caused by Hydrogen in Stable Austenitic Stainless Steels
Gavriljuk, V.; Hänninen, H.; Tarasenko, A.; Tereshchenko, A.S.; Ullakko, K.1993 Stress Corrosion Cracking of Low Alloy Steel Weldments in LWR
Hänninen, H.; Aaltonen, P.; Ehnsten, U.; Arilahti, E.1993 Effects of Nitrogen on Corrosion Resistance and Hydrogen Embrittlement, Plenar speech
Hänninen, H.1993 Stress corrosion cracking of low alloy steel weldments in LWR environments
Hänninen, Hannu; Aaltonen, Pertti; Arilahti, Esko; Ehrnsten, Ulla1993 ISBN: 0873392582Internal Friction Behaviour of Virgin Dislocated Martensite
Liu, Yong; Hänninen, Hannu; Pietikäinen, Juhani1993 Low Temperature Structural Changes of Virgin Martensite as Observed by Internal Friction Method
Liu, Y.; Hänninen, H.1993 STRUCTURE AND AGING BEHAVIOUR OF FE-NI MARTENSITES
NADUTOV, VM; ULLAKKO, KM; GAVRILJUK, VG; Hänninen, Hannu1993 Wear Resistance of High Nitrogen Austenitic Stainless Steels Manufactored by Molten and Powder Metallurgy Routes
Romu, Jyrki; Tervo, J.; Hänninen, H.; Liimatainen, J.1993 Stress Corrosion Cracking of Cold Worked Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Trolle, M.1993 Stress corrosion cracking of cold worked austenitic stainless steel pipes in BWR reactor water
Tähtinen, Seppo; Hänninen, Hannu; Trolle, Margareta1993 ISBN: 0-87339-258-2Hot and Cold Rolling of High Nitrogen Fe-Mn-Cr-N and Fe-Ni-Cr-N Austenites
Ullakko, K.; Tarkiainen, R.; Levonmaa, R.; Gavriljuk, V.; Hänninen, H.1993 Welding of Duplex and Superduplex stainless steels with Nitrogen Containing Shielding Gas
Väisänen, P.; Hänninen, H.; Kyröläinen, A.1993 Effect of Hydrostatic Pressure on Isothermal Martensitic Transformation in an Fe-Ni-C Alloy at Low Temperatures
XIE, ZL; Hänninen, Hannu; Pietikäinen, Juhani1993 The Aging of Martensite of Iron-Nitrogen Alloys
Gavriljuk, V.; Nadutov, V.; Ullakko, K.; Hänninen, H.1992 Threshold Values for Corrosion Fatigue Crack Growth Rate of Pressure Vessel Steels on PWR Primary Water
Hänninen, H.; Arilahti, E.; Ehrnsten, U.1992 Direct Observations on Hydrogen Effects on Fracture of A533B Steel
Hänninen, H.; Lee, T.; Robertson, I.; Birnbaum, H.1992 THRESHOLD VALUES FOR CORROSION-FATIGUE CRACK-GROWTH RATE OF PRESSURE-VESSEL STEELS IN PWR PRIMARY WATER
Hänninen, Hannu; ARILAHTI, E; EHRNSTEN, U1992 ISBN: 951-96485-1-8On the Use of a New Electrode Design for Studying Pitting Corrosion Potensials of Stainless Steels with a Scratched Electrode Technique
Onnela, J.; Forsen, O.; Hänninen, H.; Yläsaari, S.1992 ON THE USE OF A NEW ELECTRODE DESIGN FOR STUDYING PITTING CORROSION POTENTIALS OF STAINLESS-STEELS WITH A SCRATCHED ELECTRODE TECHNIQUE
ONNELA, J; FORSEN, O; Hänninen, Hannu; YLASAARI, S1992 ISBN: 951-96485-0-XCompound Tube Cracking Problems in Black Liquor Recovery Boilers
Pohjanne, P.; Hänninen, H.1992 Cracking of Compound Tubes in Black Liquor Recovery Boilers
POHJANNE, P; Hänninen, Hannu; MAKIPAA, M; EHRNSTEN, U1992 in TAPPI PROCEEDINGS (TAPPI PRESS)ISBN: 0-89852-862-3ISSN: 1047-305XStress Corrosion Cracking of INCONEL X-750 in LWR Environments
SAARINEN, K; Hänninen, Hannu; EHRNSTEN, U1992 ISBN: 951-96485-1-8Application of Contact Electric Resistance Technique for Corrosion Studies of Nuclear Power Plant Material in LWR Water Environments
Saario, T.; Hänninen, H.1992 APPLICATION OF CONTACT ELECTRIC-RESISTANCE TECHNIQUE FOR CORROSION STUDIES OF NUCLEAR-POWER-PLANT MATERIALS IN LWR WATER ENVIRONMENTS
SAARIO, T; MARICHEV, VA; Hänninen, Hannu1992 ISBN: 951-96485-1-8HYDROGEN EFFECTS IN AUSTENITIC STAINLESS STEELS
Hänninen, Hannu; Hannula, Simo Pekka; Tähtinen, Seppo1981 Non-refereed scientific articles
Book sectionInfluence of Material, Environment and Strain Rate on Environmentally Assisted Cracking of Austenitic Nuclear Materials
Ehrnsten, Ulla; Karlsen, Wade; Pakarinen, Janne; Ahonen, Matias; Kuivalainen, Pasi; Ivanchenko, Mykola; Saukkonen, Tapio; Hänninen, Hannu2011 ISBN: 978-951-38-7689-0ISSN: 1235-0605Unrefereed conference proceedingsInfluence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 Actuation of magnetic shape memory alloys at low temperatures
Straka, Ladislav; Hänninen, Hannu; Heczko, Oleg; Sozinov, Alexei2014 ISBN: 978-3-933339-22-5Enhanced Fatigue Behavior of Ni-Mn-Ga Magnetic Shape Memory Alloys with Tailor-made Fine Twin Microstructure
Straka, L.; Hänninen, H.; Soroka, A.; Ezer, Y.2012 ISBN: 978-3-933339-19-5EAC Susceptibility of Nickel Based Weld Metals in Doped Steam
Hänninen, Hannu; Toivonen, Aki; Karlsen, Wade; Saukkonen, Tapio; Brederholm, Anssi; Aaltonen, Pertti; Ehrnstén, Ulla2010 Scientific books (monographs)
Book (editor)Statistical Aspects of Fatigue and Fracture
Virkkunen, I.; Marquis, G.; Wallin, Kim; Hänninen, Hannu2000 Publications intended for professional communities
Article in professional journalKäyttövarmuutta kattiloihin uusilla materiaalivaihtoehdoilla
Tuurna, Satu; Romu, Jyrki; Hänninen, Hannu; Mahanen, Jouni; Puikkonen, Tony2017 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hydrogen effects on mechanical properties of reduced activation ferrite-martensite and ODS-RAFM steels
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Ultralujien rakenneterästen hitsattavuus ja hitsausliitosten ominaisuudet
Peltonen, Mikko; Kukkonen, Akseli; Nummela, Sami; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinjätekapselin kuparivaippa: kestääkö, syökö korroosio, murtaako vety?
Rantala, Juhani; Hänninen, Hannu; Aromaa, Jari; Carpén, Leena; Rajala, Pauliina2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Aalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Aalto-yliopiston opetus- ja tutkimustoiminta hitsaustekniikan eturintamassa
Vilaça, Pedro; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Hänninen, Hannu2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Ydinvoimalaitosten vaativien ruostumattomista teräksistä valmistettujen komponenttien hitsaus
Aaltonen, Pertti; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Ukkonen, A.; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2004 in Welder (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels.
Paro, Jukka; Hänninen, Hannu; Kauppinen, Veijo2001 in WEAR (Elsevier BV)ISSN: 0043-1648Stainless steel research in the laboratory of Engineering Materials
Hänninen, H.1997 in Polysteekki (Elsevier BV)ISSN: 1455-9595Termomekaanisesti valssatun lujan RAEX 500 M teräksen hitsaus
Kotamies, J.; Brederholm, A.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Uusien ruostumattimien 12%Cr terästen hitsaus
Lokka, M.; Lahti, K.; Vilpas, M.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Adhesive wear of high nitrogen austenitic stainless steels
Tervo, J.; Hänninen, H.; Ylöstalo, O.; Liimatainen, J.1994 in TRIBOLOGIA (Suomen Tribologiayhdistys)Article in professional conference proceedingsEffect of welding conditions on the hot cracking susceptibility of carbon steel
Amaya, Toru; Yonezawa, Toshio; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu2016 Modelling fracture behaviour of high strength low alloy steel with microstructural FE model and crystal plasticity
Andersson, Tom; Laukkanen, Anssi; Sippola, Merja; Saukkonen, Tapio; Hänninen, Hannu2016 Thermal aging induced phase transformations in nuclear grade type 316L stainless steel weld metals
Ivanchenko, Mykola; Ehrnstén, Ulla; Forsström, Antti; Hänninen, Hannu; Ballinger, Ronald2016 Hydrogen absorption and behavior in copper as a result of corrosion reactions and γ-radiation in spent nuclear fuel repository conditions
Yagodzinskyy, Yuriy; Hänninen, Hannu2016 Hot cracking susceptibility evaluation of Alloy 52 and 152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi2016 Hot cracking susceptibility evaluation of Alloy 52/152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi; Hänninen, Hannu2016 Characterization of strain localization in metastable austenitic stainless steel by digital image correlation
Antin, Kim-Niklas; Talonen, Juho; Bossuyt, Sven; Hänninen, Hannu2015 Computational estimation of risk of hot cracking in narrow gap welding
Keinänen, Heikki; Hänninen, Hannu; Sarikka, Teemu2015 Published development or research reportStructural integrity of Ni-base alloy welds
Hänninen, Hannu; Brederholm, Anssi; Sarikka, Teemu; Mouginot, Roman; Holmström, Petra; Saukkonen, Tapio; Toivonen, Aki; Karjalainen-Roikonen, Päivi; Nevasmaa, Pekka; Keinänen, Heikki; Leskelä, Esa; Ahonen, Matias; Ehrnstén, Ulla; Aaltonen, Pertti2014 Microstructures of nickel-base alloy dissimilar metal welds
Mouginot, Roman; Hänninen, Hannu2013 Materials Science and Technology - Nuclear Materials, Advanced Course
Hänninen, Hannu; Kiesi, Timo2012 Hydrogen Sensitivity of Different Advanced High Strength Microstructures (HYDRAMICROS)
Hickel, Tilmann; Duprez, L.; Hänninen, Hannu; Thiessen, R.; Mraczek, K.2011 Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2011 White Paper on Crack Initiation of Structural Materials in LWRs
Rik-Wouter, B.; Kilian, R.; Oijerholm, J.; Horner, T.; Raquet, O.; Ehrnsten, U.; Martin, O.; Novotny, R.; Ritter, S.; Perosanz, F.; Wessels, J.; Hänninen, H.2011 Toughness Properties of Ferritic Stainless Steels
Levonmaa, Raimo; Hänninen, Hannu; Romu, Jyrki2010 Properties of FeCrAl Alloys and Austenitic Stainless Steel for Boiler Environments
Pohja, Rami; Hänninen, Hannu2010 State-of-the-art of thermoelectric materials processing
Tervo, Jyrki; Manninen, Antti; Ilola, Risto; Hänninen, Hannu2009 Friction Stir Welding, Stir, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu; Api, Marko; Keinänen, Heikki; Martikainen, Hannu; Tervo, Jyrki; Sirén, Mika2008 Friction Stir Welding of High Temperature Materials, Kuuma, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2008 New Amorphous Alloys in Metal Layers
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2008 Hot Cracking and Environment-assisted Cracking Susceptibility of Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Gripenberg, Hans; Toivonen, Aki; Ehrnsten, Ulla; Aaltonen, Pertti2007 Mechanical Characterisation of Austenitic Stainless Steels and Inconel Alloys under Dynamic Strain Aging Conditions
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 Residual Stress Measurements of Copper Canister EB-welds
Gripenberg, Hans; Hänninen, Hannu2006 Dissimilar Metal Weld Joints and their Performance in Nuclear Power Plant and Oil Refinery Conditions
Hänninen, Hannu; Aaltonen, Pertti; Brederholm, Anssi; Ehrnstén, Ulla; Gripenberg, Hans; Toivonen, Aki; Pitkänen, Jorma; Virkkunen, Iikka2006 Dynamic Strain Aging of Nuclear Power Plant Materials
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Hänninen, Hannu2006 Hitsaushuurun vähentäminen teollisuudessa
Koskinen, Ari; Schimberg, R.; Hänninen, Hannu2006 Hitsaamon pienhiukkaset - Fine Particles in Welding Workshop
Koskinen, Ari; Hänninen, Hannu2006 Thermal Fatigue Testing of the PWR Secondary Circuit Piping
Mononen, Janne; Virkkunen, Iikka; Hänninen, Hannu2006 Microstructure of Friction Stir Welded Copper Joints
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2006 Hitsaushuurun pienhiukkaset ja niiden terveydelliset vaikutukset
Keränen, Marko; Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2005 Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking
Petterson, R.; Flyg, J.; Wessman, S.; Herting, G.; Ibrahim, N.; Fatehi, K.; Qvarfot, R.; Lo Piccolo, E.; Scoppio, L.; Ladwein, T.; Ligier, V.; Coudreuse, L.; Matres Serrano, V.; Hochölter, G.; Kristzt, K.; Richter, A.; Kivisäkk, U.; Leinonen, H.; Kinnunen, T.; Varis, P.; Nöjd, K.; Ohligschläger, T.; Virkkunen, Iikka; Hänninen, Hannu; Romu, Jyrki; Taulavuori, T.2005 Selvitys: Soodakattila tulevaisuudessa materiaalivaihtoehtojen valinta osaprojekti
Pohjanne, P.; Hänninen, Hannu; Kiesi, Timo2005 Copper-carbon Composites
Romu, Jyrki; Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Materials Selection for High Temperature Applications
Savolainen, Kati; Mononen, Janne; Ilola, Risto; Hänninen, Hannu2005 Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet
Romu, Jyrki; Hänninen, Hannu2004 Katalyyttipinnat ja niiden valmistus
Ilola, Risto; Romu, Jyrki; Papula, Suvi; Hänninen, Hannu2003 Narrow Gap Arc Welding Experiments of Thick Copper Sections
Pohja, Rami; Vestman, Heikki; Jauhiainen, Petra; Hänninen, Hannu2003 Rakenteiden keventäminen termomekaanisesti valmistettuja teräksiä käyttämällä (TERMO)
Brederholm, Anssi; Nevasmaa, Pekka; Laukkanen, Anssi; Wallin, Kim; Nenonen, Pertti; Gripenberg, Hans; Karppi, Risto; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; Japanin matkakertomus
Hänninen, Hannu; Tiitinen, Eero; Tanaka, Toshi; Kiesi, Timo2002 GT-MAT: Kaasuturbiinien materiaalit: Inconel 738 LC superseoksen termisen väsymisen kestävyys ja vaurioasteen arviointi ainettarikkomattomasti
Kemppainen, Mika; Aalto, Miikka; Hänninen, Hannu2002 Pinnoitushitsaus eri menetelmillä
Keränen, Marko; Luukas, Mikko; Kasurinen, Heikki; Kakko, Ago; Hänninen, Hannu2002 Kapearailohitsaus perinteisillä menetelmillä
Paljakka, Vivi; Korhonen, Mika; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; rakennusasteen noston vaikutukset materiaalin valintaan, materiaalitutkimus
Pohjanne, Pekka; Hänninen, Hannu; Kiesi, Timo2002 Superplasticity in stainless steels
Romu, Jyrki; Hänninen, Hannu2002 Precipitation of secondary phases in Duplok 27 stainless steel with emphasis on copper effects
Smuk, Olena; Nenonen, Pertti; Hänninen, Hannu; Liimatainen, Jari2002 Corrosion Resistance of Welded Stainless Steels in Salt Spray Chanber Tests and Road Conditions
Alenius, Marko; Kyröläinen, A.; Vilpas, Martti; Hänninen, Hannu2001 Effects of EDM on Surface Residual Stresses in a TMCP Steel
Gripenberg, H.; Siiriäinen, J.; Saukkonen, T.; Hänninen, Hannu2000 Termisesti väsytettyjen kaasuturbiinimateriaalien karakterisointi: tulokset väsytyskokeista, rikkovasta tarkastuksesta sekä jäännösjännitys- ja röntgendiffraktiomittauksista
Kemppainen, M.; Hänninen, Hannu2000 Design and Implementation of Ring-Core Method for Residual Stress Measurement
Siiriäinen, J.; Gripenberg, H.; Hänninen, Hannu2000 Residual Stresses Induced by Cyclic Thermal Loads
Virkkunen, I.; Kemppainen, M.; Hänninen, Hannu2000 Fabrication and properties of stainless steel sandwich structures
Alenius, M.; Hänninen, H.1999 Kaasuturbiinien korkean lämpötilan vaurioitumismekanismit
Kemppainen, M.; Hänninen, H.1999 Hitsatut ja hipatut paksut pinnoitteet korkean lämpötilan sovelluksissa
Viitala, T.; Hänninen, H.1999 The effect of sulphate on crack growth rates in stainless steel and alloy 182 weld metal in BWR environment
Aaltonen, P.; Ehrnsten, U.; Hänninen, H.1998 Proceedings of the NI-seminar "Stainless Steels in Transport Industry" February 4-5. 1998
Alenius, M.; Lokka, M.; Hänninen, H.1998 Esiselvitys soodakattilan uusista rakennemateriaaleista
Hänninen, H.; Pohjanne, P.; Laitinen, A.; Saarinen, P.1998 Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Jagodzinski, yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Internal Friction Study of Interstitial Behaviour in Low Activated Martensitic F82H Steel
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Tähtinen, S.; Hänninen, H.1998 Kilpailukykyinen hitsaustuotanto: kustannus ja laatutehokkuus
Karppi, R.; Brederholm, A.; Hänninen, H.1998 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCil2 solution
Leinonen, H.; Hänninen, H.1998 Elastic behaviour of nitrogen alloyed austenitic stainless steels
Tervo, J.; Tasarenko, A.; Hänninen, H.1998 Kaasuturpiinit - esiselvitys
Auerkari, P.; Heikinheimo, L.; Korpiola, K.; Kauppinen, P.; Lepistö, T.; Vuoristo, P.; Hänninen, H.; Virkkunen, I.1997 Low temperature sensitisation of austenitic stainless steels
Ehrnstén, U.; Aaltonen, P.; Hänninen, H.1997 Ruostumattomat teräkset kuljetusvälineissä - Teollisuussovellukset
Lahti, K.; Vilpas, M.; Heikonen, M.; Lokka, M.; Hänninen, H.1997 Thermal fatigue of recovery boiler composite tube
Saarinen, P.; Hänninen, H.1997 The use of stainless steels in transport vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Heikonen, M.; Alenius, M.; Hänninen, H.1997 Phase Transformations and Relaxation Phenomena in Hydrogen-Charged CrNiMn and CrNi Stable Austenitic Stainless Steel
Gavriljuk, V.G.; Hänninen, H.; Smouk, S.Yu; Tarasenko, A.V.; Tereshchenko, A.S.; Ullakko, K.1996 Kompound materiaalit
Hänninen, H.1996 Kompound-putken termisen ruiskupinnoitteen karakterisointi
Ilola, R.; Hänninen, H.1996 Ruostumattoman 12%Cr RHS-putkipalkin pienaliitoksen väsymiskestävyys
Lahti, K.; Hänninen, H.; Vilpas, M.1996 Stainless for Transport - Milestone report 1.10.1993 - 30.9.1995
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Stainless for Transport
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Properties of NKK-Serena Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1995 Funktionaaliset materiaalit ja älykkäät rakenteet koneenrakennuksessa
Brederholm, A.; Ullakko, K.; Hänninen, H.1995 HIPed P/M Duplex Stainless Steels
Hämäläinen, Esa; Hänninen, H.; Liimatainen, J.1995 HIPped/ P/M Maraging steels
Nieminen, M.; Hänninen, H.; Liimatainen, J.1995 HIPed P/M High Nirtogen Austenitic Stainless Steels
Tervo, J.; Romu, Jyrki; Hänninen, H.; Liimatainen, J.1995 Elinjaksokustannus- ja elinkaarianalyysi ja niiden soveltaminen materiaalinvalinnassa
Lokka, M.; Hänninen, H.1994 Nitrogen Alloyed Martensitic Steels
Romu, J.; Liu, Y.; Hänninen, H.1994 The Use of Narrow-Gap Welding for Stabilized Stainless Steel Pipings - A Literature Survey
Vilpas, M.; Pelli, R.; Aaltonen, P.; Hänninen, H.1994 Cyclic Crack Growth Evaluation of a 20MnMoNi55 Piping Steel in High-Oxygen Reactor Water
Aaltonen, P.; Rintamaa, R.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 ICG-EAC Bolt-loaded WOL-Specimen Round Robin results on VTT for RPV-steel Weldments Tested in PWR Water
Aaltonen, P.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 Thermal Fatigue - A Literature Review
Bartsch, K.; Hänninen, H.; Nieminen, M.1993 Materiaalin valinnan asiantuntijajärjestelmät, vaativien rakenteiden materiaalitekniikka
Hänninen, H.1993 Typpiseostuksen vaikutus ruostumattomien terästen ominaisuuksiin
Nieminen, M.; Hänninen, H.1993 High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies
Romu, J.; Hänninen, H.1993 Ydinvoimalaitosten paineastiaterästen vetyhaurauden ja säteilyhaurastumisen yhteisvaikutukset
Hänninen, H.1992 Pulverimetallurgisesti valmistettujen maraging-terästen ominaisuudet
Laitinen, Eero; Nieminen, Markku; Hänninen, H.1992 Muotohitsaus, menetelmät, käyttöperusteet ja tulevaisuudennäkymät
Niini, E.; Vartiainen, S.; Vilpas, M.; Hänninen, H.1992 Ruostumattomien terästen jännityskorroosion ja korroosioväsymisen estäminen
Pohjanne, P.; Hänninen, H.1992 Austeniittisen ja duplex ruostumattomien terästen jännityskorroosio ja korroosioväsyminen kuumissa kloridiliuoksissa
Pohjanne, P.; Hänninen, H.1992 Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Nenonen, P.; Ehrnsten, U.1992 Overview of the Nuclear Power Plant Structural Integrity Research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, H.; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.1992 Patents and invention disclosures
PatentMethod for Producing Defects and Tensile Residual Stresses
Elfving, K.; Hänninen, Hannu; Kemppainen, Mika; Saarinen, P.; Virkkunen, Iikka2004 TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Antin, Kim-Niklas; Talonen, Juho; Hänninen, Hannu; Singh, Preet2014 Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Kemppainen, H.; Hänninen, Hannu; Törrönen, K.; Salonen, S.1982 in ULTRAMICROSCOPY (Elsevier Science B.V.)ISSN: 0304-3991
Hydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel
Hydrogen uptake and embrittlement susceptibility of ferrite pearlite pipeline steels
Hydrogen effects on strain localization in FCC metals at the initial stage of plastic deformation
Fracture mechanical and microstructural characterization of narrow-gap safe-end dissimilar metal weld
Improved Understanding of Varestraint Testing—Nickel-Based Superalloys
Short-range ordering of Alloy 690 aged for 10 000 h at 420, 475 and 550 °C
Factors Affecting Low Temperature Crack Propagation (LTCP) Susceptibility of Nickel-Based Alloy 182, 82, 152 and 52 Weld Metals
Effect of heat treatment and cold work on the ordering of alloy 690 at 475°C
Fatigue strength of welded extra high-strength and thin steel plates
The effect of microstructure on Low-Temperature Crack Propagation (LTCP) susceptibility of nickel-based Alloy 182, 152 and 52 weld metals in PWR primary water
Effect of strain on hydrogen solubility and trapping in AISI 316L austenitic stainless steel
Effect of second pass in 2-sided FSW of high-strength structural steel
Hydrogen effect of tensile properties of EUROFER 97 and ODS-EUROFER steels at elevated temperatures
Characterization of a Ni-base NG-DMW weld of modern PWR
Effect of strength mismatch on fracture mechanical behavior of NG-DMW
Hydrogen-induced delayed fracture of high-strength carbon steels
Hydrogen-induced Strain Localization at Meso-scale in Austenitic Stainless Steels
Hydrogen-induced strain localization in austenitic stainless steels and possible origins of their hydrogen embrittlement
Role of non-metallic inclusions in hydrogen-induced fracture of high-strength carbon steels
Ageing degradation of a hard-facing alloy after long-time exposure to BWR conditions
Low temperature crack propagation (LTCP) susceptibility of nickel-based weld metals alloy 182, 152 and 52 in PWR primary water
Hydrogen Solubility and Trapping in AISI 316L Austenitic Stainless Steel
Effect of strength mismatch and microstructure on mechanical properties of BWR dissimilar metal safe-end weld
Hydrogen-induced Cracking of Oxygen-free Phosphorous-doped Copper
Application of alloy 690 and associated weld metals in PWRs
Hydrogen solubility and diffusion and its effects on plastic deformation in austenitic stainless steels
Hydrogen uptake and its effect on tensile properties of Eurofer 97-2 and ODS-Eurofer steels
Fracture mechanical characterisation of ferrite-austenite dissimilar metal welds (DMWs) for elevated temperature service in view of metallurgical mis-match
Corrosion resistance of Kanthal A-1 and Fe-12Cr-2Si alloy coatings in Cl-containing environment
Intermartensite transformation in Ni50Mn25+xGa25-x alloys and its effect on twinning stress
Hydrogen Solubility and Diffusion in Metastable Austenitic Stainless Steels Studied with Thermal Desorption Spectroscopy
Effect of Alloy Composition and Temperature on Corrosion Behavior of Stainless Steels in Hot Alkaline Solutions
Influence of secondary flash formation on friction surfacing of high-strength steel substrate with AISI 316 consumable
Hydrogen Effects on Plastic Deformation of AISI 316LN Single Crystals
Forced torsion pendulum for studies of interactions at solid-liquid interface
Improved Varestraint Testing by Modification of Sample Geometry
Stress Corrosion Cracking and Crack Tip Characterization of Alloy X-750 in Boiling Water Reactor Environments
Effect of Hot Cracks on EAC Crack Initiation and Growth in Nickel-base Alloy Weld Metals
Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Sulfide Containing Alkaline Solutions
Effect of Alloy Composition on Stress Corrosion Cracking Susceptibility of Duplex Stainless Steels in Hot Alkaline Sulfide Solution
Effect of Thermal Aging on SCC, Material Properties and Fracture Toughness of Stainless Steel Weld Metals
New Generation Ferritic and Duplex Stainless Steels: Preliminary Study on Mechanical and In-Service Properties of Base Materials and Welded Joints
Plastic Strain and Residual Stress Distributions in AISI 304 Stainless Steel Power Plant Pipe Welds
Role of Excessive Vacancy Generated in p-n Type Duplex Cu2O Film under Anodic Bias in TGSCC of Pure Copper
Metallurgical Response of Electron Beam Welded Allvac® 718Plus™
Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Effect of Selective Dissolution on Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions
Effect of Sodium Sulphide Addition on Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions
Plastic strain and residual stress distributions in an AISI 304 stainless steel BWR pipe weld
Ni-Mn-Ga single crystals with very low twinning stress
Evaluation of Post-Weld Heat Treatment as a Method to Prevent Stress Corrosion Cracking of Carbon Steel in Ethanol by Notched Constant Tensile Load Testing
Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption and Mechanical Loss Spectroscopy
Environment-Assisted Cracking and Hot Cracking of Ni-Base Alloy Dissimilar Metal Welds
Low Temperature Crack Propagation of Nickel-based Weld Metals in Hydrogenerated PWR Primary Water
Effect of Hydrogenated Low Temperature Water on Fracture Toughness of Nickel-Based Weld Metals
Thermoplastic Wire Drawing from Bulk Metallic Glass
Development of Materials for Nuclear Power Plants
Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel
Hydrogen solubility and diffusion in austenitic and duplex stainless steels studied with thermal desorption spectroscopy
Deformation Localisation and EAC Inhomogenous Microstructures of Austenitic Stainless Steels
EAC Crack Initiation in Nickel-Based Dissimilar Metal Welds Using Doped Steam Test
Dynamic Strain Aging of NI-Base Weld Metals in Comparison to Alloy 600 and 690
Optical Strain Measurement of Plastic Strain Localization in Nuclear Waste Copper Canisters
Bulk metallic glass coating of polymer substrates
Solidification Cracking of Alloy Allvac 718Plus and Alloy 718 at Transvarestraint Testing
Hot Cracking of Allvac 718Plus, Alloy 718 and Waspaloy at Varestraint Testing
Trends in Forming and Welding of Stainless Steels
Hot Cracking Susceptibility of Inconel Dissimilar Metal Welds
Hot cracking susceptibility of ni-base alloy dissimilar metal welds
Photocatalytic Activity of Atomic Layer Deposited (ALD) TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys
Microstructure and Plastic Strain Distribution of an AISI 304 Stainless Steel Power Plant Pipe Weld Studied by EBSD
Microstructure and Texture Analysis of Friction Stir Welds of Copper
EBSD Lessons from Various Plastic Strain Mapping Cases
Entrapped Oxide Particles in Copper Friction Stir Welds
Static Strain Ageing of Metastable Austenitic Stainless Steel
Effect of Hydrogen on Plastic Strain Localization in Single Crystals of Nickel and Austenitic Stainless Steel
Hydrogen-induced Cracking of Metastable Austenitic Stainless and High-Strength Carbon Steels
Environment-Assisted Cracking and Hot Cracking of Ni-base Alloy Dissimilar Metal Welds
Characterization of Solute Redistribution and Microstructural Development in Ni-base Alloy Weld Metals
Environmentally Assisted Cracking of Cold-worked Stainless Steels Mechanistic Point of Wiew
Structural Damage of Aluminum Alloy 6082 Determined by Nonlinear Elastic Wave Modulation Spectroscopy
Effects of Straining on Oxide Films and Passivity of Copper in Nitrite Solution at Ambient Temperature
Dynamic Strain Ageing and EAC of Deformed Nitrogen-alloyed AISI 316 Stainless Steels
Dynamic Strain Aging of Ni-base Alloys Inconel 600 and 690
FSW of PH 15-7 Stainless Steel Sheet
A Preliminary Study on Friction Stir Welding of Dissimilar Metal Joints of Copper and Aluminium
Effect of Temperature on Tensile Behaviour and Microstructural Evolution of Nitrogen Alloyed Austenitic Stainless Steel
Electrochemical Potential Oscillations During Galvanostatic Passivation of Copper in NaNO2 Solution and their Role in TGSCC Mechanism
Comparative Study of Nitrogen and Carbon Effects on Mechanism of Reversion of a´ Martensite to Austenite in Metastable AISI 301 Steel Grades
Effect of Forming Temperature and Cooling Rate on Superplastic Formability and Corrosion Resistance of EN 1.4162 Duplex Stainless Steel
Mechanical and Electrical Properties of CNT/copper Nanocomposites Processed by Hot Pressing
Hydrogen-Dislocation Interactions and their Role in HELP Mechanism of Hydrogen Embrittlement
Surface Contamination on Stainless Steel in Paper Machine Environment
Application and Performance of High Nirogen Steels
Kopparkapslar ?Tillverkning, Förslutsning, Beständighet
Dynamic Strain Ageing of Nitrogen-alloyed AISI 316L Stainless Steel
Hitsaamon pienhiukkaset
Determination of Fine Particles in Welding Fumes
Advanced Flaw Manufacturing and Crack Growth Control
Superplastic Forming of LDX 2101 (EN 1.4162) Duplex Stainless Steel
Design of the Grain Structure in Copper by Friction Stir Processing
Friction Stir Weldability of Copper Alloys
Static Strain Aging of Cold-worked Austenitic Stainless Steel
Effect of Thermal Stresses along Crack Surface on Ultrasonic Response
Nitrogen and Carbon Effects on Mechanisms of Reversion of Martensite to Austenite in Metastable AISI 301 Steel Grades and Their Hot Formability
Vacancy Generation in Electrochemical Oxidation/Dissolution of Copper in NaNo2 Solution and its Role in SCC Mechanism
Vacancy generation in electrochemical oxidation / dissolution of copper in NaNO2 solutions and its role in SCC mechanism
Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Summary of Recent Research on N-alloying of Steels in Finland
Hydrogen Interactions with 2.25Cr and 9Cr Steels
Role of Dynamic Strain Aging in Environment Sensitive Cracking of Low Alloy and Stainless Steels in LWRs
Effects of dynamic strain aging on environment-assisted cracking of low alloy pressure vessel and piping steels
Main Working Principles of Nuclear Reactors: Materials Science.
Production of Realistic Flaw in Inconel 600
Stress corrosion cracking and life prediction of austenitic stainless steels in calcium chloride solution
Experimental Investigations Concearning the Possible Effect of Dynamic Strain Aging on Environmentally-Assisted Cracking of Low Alloy Steels in Oxygenated High-Temperature Water
Investigation of Dynamic Strain Aging Effects of Low Alloy Steels and their Possible Relevance for Environmentally-Assisted Cracking in Oxygenated High-Temperature Water
Effect of Strain and Strain Rate on the Electric Properties of the Oxide Film Growing on an Austenitic Stainless Steel in Simulated BWR Conditions
Effect of Strain on Electric Properties of Oxide Films Growing on AISI 316L Steel in Simulated BWR Conditions
The Effect of Plastic Deformation on Damping Properties of Austenitic Stainless Steels
Thermal Fatigue In NDE Artificial Flaw Manufacturing for LWR Applications
Effect of Hydrogen on Plastic Deformation of Stable 18Cr-16Ni-10Mn Austenitic Stainless Steel Single Crystals
Interactions of Hydrogen in Copper Studied by Internal Friction Method
Dwell time effects on fatigue life and damage mechanisms
Ydinvoimalaitosten painelaitteiden, putkistojen ja höyrynkehittimien rakenteet ja materiaalit
Realistic Cracks for In-Service Inspection Qualification Mock-ups
Hydrogen Mechanical Spectroscopy Study of Atomic Ordering in Inconel 939 Alloy
Stress Corrosion Cracing and Life Prediction of Austenitic Stainless Steels in Calcium Chloride Solution
Cost comparison of FSW and MIG welded aluminium panels
Superplasticity and Superplastic Forming in Finland - Recent Advancements and Future Prospects
Thermal Fatigue and NDE Qualification Applications
Intergranular Cracking of AISI 316NG Stainless Steel in BWR Environment
Cracking of recovery boiler composite tubes - thermal fatigue or stress corrosion cracking ?
Effects of Dynamic Strain Aging on Environment-Assisted Cracking of Low Alloy Pressure Vessel and Piping Steels
Modelling of material ageing
New HIPed Powder Metallurgy Super Duplex Stainless Steel Suction Roll Shells with Excellent Corrosion and Fatigue Properties for Paper Machine Applications
Superplastic Forming of Commercial Grade Aluminium and Stainless Steel Sandwich Panels
Commercial Grade Aluminium and Stainless Steel Sandwich Panels - Preparation, Superplastic Forming and Post-Formed Properties
Advanced Composite Tube Materials for Lower Furnace in Black Liquor Recovery Boilers
Effects of secondary phase precipitation on corrosion properties of duplex stainless steels
Load Sharing in Duplex Stainless Steels Determined by Barkhausen Noise
Mechanical Properties of Austenitic High Nitrogen Steels at Elevated Temperatures
Manufacturing aluminium sandwich structures by means of superplastic forming
Fatigue Behaviour of Calcium-treated and Non-Calcium-Treated AlSl 8620 Carburizing Steel
Fatigue behaviour of calcium-treated and non-calcium-treated AISI 8620 carburizing steel
A Powder-Metallurgy Approach to Fabricating a Nitrogen-Gradient Structure for Multi-Material Biomedical Implants
Narrow Gap GTA Welding of P/M Super Duplex Stainless Steels
Narrow Gap GTA Welding of P/M Super Duplex Stainless Steels
Carbide Containing Metal Matrix Composite Coatings Produced by PTAW Method
Fatigue Strength of Plasma Arc-, Tandem MiG- and Friction Stir Butt Welds in 5083 and 6082 Aluminium Alloys
Drilling and tapping of hard tempered steels
Drilling of hiped P/M and conventional duplex stainless steels
Tool wear and machinability of hipped P/M and conventional duplex stainless steels
Tool wear and machinability of hipped P/M and conventional cast duplex stainless steels
Thermal Fatigue of New Composite Tube Materials
The Inner and Outer Surface Cracking of the Recovery Boiler Floor Tubes
Study of the Mechanisms of the Secondary Phase Precipitation in P/M-HIP Super Stainless Steels
Internal Friction Study of Phase Transformations and Hydrogen Effects in Super duplex stainless Steels
Effects of Copper on Precipitation of Secondary Phases in Duplex Stainless Steels
Thermal Fatigue of Duplex Stainless Steels
Study of Hydrogen Diffusion in P/M-HIP SAF 2507 Super Duplex Stainless Steel by the Internal Friction Method
Effect of Recrystallisation Annealing on Grain Refinement for Superplastic Forming of Cold Rolled AA 5083 Aluminium Base Alloy
Laser beam welded stainless steel sandwich panels
Mikä on vaurio, milloin tarvitaan vaurioanalyysiä
Corrosion properties of HNS
Materiaalien ominaisuudet
Dynamic Strain Ageing of Austenitic High Nitrogen Cr-Mn Steels
Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steels studied by means of internal friction
Interaction of nitrogen with diislocations studied by means of amplitude-dependent internal friction
Norrow gap GTA welding of stainless steels
Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCl_2 solution
Tool wear and machinability of X5 CrMnN 18 18 stainless steels
Comparison of hydrogen effects on alloy 600 and 690
Redistribution of Alloying Elements in Electron-Irradiated Iron-Based FCC Alloys Studied by Hydrogen-Probe Mechanical Spectrosscopy
Fracture toughness and internal friction of GlidCop®Al-25 alloy
Fracture Toughness and Internal Friction of CuAL25 Alloy
The role of nitrogen improving pitting corrosion resistance of high-alloy austenitic stainless steel welds
Thermal fatigue crack growth in austenitic stainless steels
Modelling of environmentally assisted cracking
Corrosion properties of HNS
Dynamic Stain Ageing of Austenitic High Nitrogen Cr-Ni and Cr-Mn Steels
Distribution of interstitial impurities and their diffusion parameters in high-nitrogen steel studied by means of internal friction
Nominal stress range of stainless steels fillet welds
Nominal stress range fatigue of stainless steel fillet welds
Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
The role of nitrogen in improving pitting corrosion resistance of high-alloy austenitic stainless steel welds
Influence of hydrogen changing on mechanical behaviour of Inconel-600 alloy measured by internal friction
Influence of hydrogen charging on mechanical behaviour of Inconel-600 alloy measured by internal friction
Hydrogen interaction with dislocations in austenitic AISI 310 stainless steel
Environmentally Assisted Cracking of Alloy 600 in PWR Primary Water
Corrosion properties of HIPed P/M duplex stainless steels
Combound teräkset
Stress corrosion cracking, corrosion fatigue, irradiation assisted stress corrosion cracking and irradiation embrittlement
Ferriittisten niukkahiilisten 12 % kromiterästen hitsaus ja liitosten mekaaniset ominaisuudet
Projektin "Ruostumattomien terästen käyttö kuljetusvälineissä" esittely
Model for environmentally assisted cracking of alloy 600 in PWR primary water
The use of stainless steels in welded vehicle structures
Prediction of stress corrosion cracking susceptibility of stainless steels in 50 % CaCl2 solution
Prediction of stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50 % CaCl2 solution
Drilling of P/M produced stainless steels by using TiN-coated high speed steel tools.
Corrosion and mechanical properties of nitrogen alloyed P/M HIP austentic stainless steels
Slow strain rate testing of corrosion resistant alloys in high temperature H_(2)S environments
SSC resistance oh HIPed P/M super duplex stainless steels in sour H_(2)S environments
Properties of P/M High Nitrogen Austenitic and Duplex Stainless Steels
Properties of Fe-Al-Si- High-Damping Steel
Properties of Fe-Al-Si high-damping steel
Vacancy-Creep Model for EAC of Metallic Materials in High Temperature Water
Selective Dissolution - Vacancy - Creep Model For EAC of Brass
Mechanical Properties of Cold-Rolled AISI 304LN Steel at Low Temperatures
Properties of Submerged Arc Welded TMCP-steel Weldments
Stainless Steel in a Bus Frame
Corrosion Resistance of Stainless Steel Welds in Vehicle Applications
Prediction of Stress Corrosion Cracing Susceptibility of Austenitic Stainless Steels in 50 % CaCl2 Solution
Hydrogen Interaction with Dislocations in Austenitic AISI 310 Stainless Steels
Welding of Low-carbon 12 % Cr Stainless Steels with Austenitic Consumables - Fracture Toughness and Fatigue of Welded Joints
Fracture Toughness and Fatigue Properties of Welded Stainless Steels used in Transport Vehicles
Welding and properties of welds of TMCP-Steel
Internal Friction in Hydrogen-Charged CrNi and CrNiMn Austenitic Stainless Steels, Hydrogen Transport and Cracking in Materials
Teräkset
Duplex-terästen käyttöalueet, mahdollisuudet, ominaisuudet ja kehitysnäkymät
Cracking and corrosion in black liquor recovery boilers
Cracking and Corrosion Problems in Black Liquor Recovery Boilers
Materiaalin valinnan asiantuntijäjärjestelmät
Mechanical Properties of Austenitic High-Nitrogen Cr-Ni and Cr-Mn Steels at Low Temperatures
Isothermal Martensitic Transformation as an Internal-Stress-Increasing Process
Development of Properties of P/M Austenitic Stainless Steels by Nitrogen Infusion
Selective Dissolution - Vacancy - Creep Model for IGSCC of Alloy 600
Stabilization of Austenite Associated with prior Formation of Martensite
Water Chemistry and Materials Behaviour in PWR's and BWR's
Application of a multipotential test method for rapid screening of austenitic stainless steels in process environments
Properties of Nitrogen Alloyed P/M Duplex Stainless Steels
Properties of Nitrogen Alloyed P/M + HIP Duplex Stainless Steels
Failures of Stainless Steel Components, 6.Jahrestagung Schadensanalyse: Nichtrostende Stähle im Kraftwerks- und Anlagenbau
Cracking and Corrosion Problems in Black Liquor Recovery Boilers
Materiaalin valinnan asiantuntijajärjestelmät, Vaativien rakenteiden materiaalitekniikka
Welding of Stainless Steels for Transport Industries
Corrosion Risks Associated with Changing Environmental Conditions for Stainless Steels
Active Wear and Failure Mechanisms of TiN Coated HSS and TiN Coated Cemented Carbide Tools when Machining HIPed Stainless Steels
Active Wear and Failure Mechanisms of TiN-Coated HSS and TiN-Coated Cemented Carbide Tools when Machining HIPped Stainless Steels
Sliding Wear of High Nitrogen Austenitic Stainless Steel
Sliding Wear of High Nitrogen Austenitic Stainless Steels
Water Chemistry and Materials Degradiation in LWR's
Phase Transformations and Relaxation Phenomena Caused by Hydrogen in Stable Austenitic Stainless Steels
Stress Corrosion Cracking of Low Alloy Steel Weldments in LWR
Effects of Nitrogen on Corrosion Resistance and Hydrogen Embrittlement, Plenar speech
Stress corrosion cracking of low alloy steel weldments in LWR environments
Internal Friction Behaviour of Virgin Dislocated Martensite
Low Temperature Structural Changes of Virgin Martensite as Observed by Internal Friction Method
STRUCTURE AND AGING BEHAVIOUR OF FE-NI MARTENSITES
Wear Resistance of High Nitrogen Austenitic Stainless Steels Manufactored by Molten and Powder Metallurgy Routes
Stress Corrosion Cracking of Cold Worked Steel Tubes in BWR-Reactor Water
Stress corrosion cracking of cold worked austenitic stainless steel pipes in BWR reactor water
Hot and Cold Rolling of High Nitrogen Fe-Mn-Cr-N and Fe-Ni-Cr-N Austenites
Welding of Duplex and Superduplex stainless steels with Nitrogen Containing Shielding Gas
Effect of Hydrostatic Pressure on Isothermal Martensitic Transformation in an Fe-Ni-C Alloy at Low Temperatures
The Aging of Martensite of Iron-Nitrogen Alloys
Threshold Values for Corrosion Fatigue Crack Growth Rate of Pressure Vessel Steels on PWR Primary Water
Direct Observations on Hydrogen Effects on Fracture of A533B Steel
THRESHOLD VALUES FOR CORROSION-FATIGUE CRACK-GROWTH RATE OF PRESSURE-VESSEL STEELS IN PWR PRIMARY WATER
On the Use of a New Electrode Design for Studying Pitting Corrosion Potensials of Stainless Steels with a Scratched Electrode Technique
ON THE USE OF A NEW ELECTRODE DESIGN FOR STUDYING PITTING CORROSION POTENTIALS OF STAINLESS-STEELS WITH A SCRATCHED ELECTRODE TECHNIQUE
Compound Tube Cracking Problems in Black Liquor Recovery Boilers
Cracking of Compound Tubes in Black Liquor Recovery Boilers
Stress Corrosion Cracking of INCONEL X-750 in LWR Environments
Application of Contact Electric Resistance Technique for Corrosion Studies of Nuclear Power Plant Material in LWR Water Environments
APPLICATION OF CONTACT ELECTRIC-RESISTANCE TECHNIQUE FOR CORROSION STUDIES OF NUCLEAR-POWER-PLANT MATERIALS IN LWR WATER ENVIRONMENTS
HYDROGEN EFFECTS IN AUSTENITIC STAINLESS STEELS
Influence of Material, Environment and Strain Rate on Environmentally Assisted Cracking of Austenitic Nuclear Materials
Unrefereed conference proceedingsInfluence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 Actuation of magnetic shape memory alloys at low temperatures
Straka, Ladislav; Hänninen, Hannu; Heczko, Oleg; Sozinov, Alexei2014 ISBN: 978-3-933339-22-5Enhanced Fatigue Behavior of Ni-Mn-Ga Magnetic Shape Memory Alloys with Tailor-made Fine Twin Microstructure
Straka, L.; Hänninen, H.; Soroka, A.; Ezer, Y.2012 ISBN: 978-3-933339-19-5EAC Susceptibility of Nickel Based Weld Metals in Doped Steam
Hänninen, Hannu; Toivonen, Aki; Karlsen, Wade; Saukkonen, Tapio; Brederholm, Anssi; Aaltonen, Pertti; Ehrnstén, Ulla2010 Scientific books (monographs)
Book (editor)Statistical Aspects of Fatigue and Fracture
Virkkunen, I.; Marquis, G.; Wallin, Kim; Hänninen, Hannu2000 Publications intended for professional communities
Article in professional journalKäyttövarmuutta kattiloihin uusilla materiaalivaihtoehdoilla
Tuurna, Satu; Romu, Jyrki; Hänninen, Hannu; Mahanen, Jouni; Puikkonen, Tony2017 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hydrogen effects on mechanical properties of reduced activation ferrite-martensite and ODS-RAFM steels
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Ultralujien rakenneterästen hitsattavuus ja hitsausliitosten ominaisuudet
Peltonen, Mikko; Kukkonen, Akseli; Nummela, Sami; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinjätekapselin kuparivaippa: kestääkö, syökö korroosio, murtaako vety?
Rantala, Juhani; Hänninen, Hannu; Aromaa, Jari; Carpén, Leena; Rajala, Pauliina2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Aalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Aalto-yliopiston opetus- ja tutkimustoiminta hitsaustekniikan eturintamassa
Vilaça, Pedro; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Hänninen, Hannu2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Ydinvoimalaitosten vaativien ruostumattomista teräksistä valmistettujen komponenttien hitsaus
Aaltonen, Pertti; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Ukkonen, A.; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2004 in Welder (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels.
Paro, Jukka; Hänninen, Hannu; Kauppinen, Veijo2001 in WEAR (Elsevier BV)ISSN: 0043-1648Stainless steel research in the laboratory of Engineering Materials
Hänninen, H.1997 in Polysteekki (Elsevier BV)ISSN: 1455-9595Termomekaanisesti valssatun lujan RAEX 500 M teräksen hitsaus
Kotamies, J.; Brederholm, A.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Uusien ruostumattimien 12%Cr terästen hitsaus
Lokka, M.; Lahti, K.; Vilpas, M.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Adhesive wear of high nitrogen austenitic stainless steels
Tervo, J.; Hänninen, H.; Ylöstalo, O.; Liimatainen, J.1994 in TRIBOLOGIA (Suomen Tribologiayhdistys)Article in professional conference proceedingsEffect of welding conditions on the hot cracking susceptibility of carbon steel
Amaya, Toru; Yonezawa, Toshio; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu2016 Modelling fracture behaviour of high strength low alloy steel with microstructural FE model and crystal plasticity
Andersson, Tom; Laukkanen, Anssi; Sippola, Merja; Saukkonen, Tapio; Hänninen, Hannu2016 Thermal aging induced phase transformations in nuclear grade type 316L stainless steel weld metals
Ivanchenko, Mykola; Ehrnstén, Ulla; Forsström, Antti; Hänninen, Hannu; Ballinger, Ronald2016 Hydrogen absorption and behavior in copper as a result of corrosion reactions and γ-radiation in spent nuclear fuel repository conditions
Yagodzinskyy, Yuriy; Hänninen, Hannu2016 Hot cracking susceptibility evaluation of Alloy 52 and 152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi2016 Hot cracking susceptibility evaluation of Alloy 52/152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi; Hänninen, Hannu2016 Characterization of strain localization in metastable austenitic stainless steel by digital image correlation
Antin, Kim-Niklas; Talonen, Juho; Bossuyt, Sven; Hänninen, Hannu2015 Computational estimation of risk of hot cracking in narrow gap welding
Keinänen, Heikki; Hänninen, Hannu; Sarikka, Teemu2015 Published development or research reportStructural integrity of Ni-base alloy welds
Hänninen, Hannu; Brederholm, Anssi; Sarikka, Teemu; Mouginot, Roman; Holmström, Petra; Saukkonen, Tapio; Toivonen, Aki; Karjalainen-Roikonen, Päivi; Nevasmaa, Pekka; Keinänen, Heikki; Leskelä, Esa; Ahonen, Matias; Ehrnstén, Ulla; Aaltonen, Pertti2014 Microstructures of nickel-base alloy dissimilar metal welds
Mouginot, Roman; Hänninen, Hannu2013 Materials Science and Technology - Nuclear Materials, Advanced Course
Hänninen, Hannu; Kiesi, Timo2012 Hydrogen Sensitivity of Different Advanced High Strength Microstructures (HYDRAMICROS)
Hickel, Tilmann; Duprez, L.; Hänninen, Hannu; Thiessen, R.; Mraczek, K.2011 Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2011 White Paper on Crack Initiation of Structural Materials in LWRs
Rik-Wouter, B.; Kilian, R.; Oijerholm, J.; Horner, T.; Raquet, O.; Ehrnsten, U.; Martin, O.; Novotny, R.; Ritter, S.; Perosanz, F.; Wessels, J.; Hänninen, H.2011 Toughness Properties of Ferritic Stainless Steels
Levonmaa, Raimo; Hänninen, Hannu; Romu, Jyrki2010 Properties of FeCrAl Alloys and Austenitic Stainless Steel for Boiler Environments
Pohja, Rami; Hänninen, Hannu2010 State-of-the-art of thermoelectric materials processing
Tervo, Jyrki; Manninen, Antti; Ilola, Risto; Hänninen, Hannu2009 Friction Stir Welding, Stir, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu; Api, Marko; Keinänen, Heikki; Martikainen, Hannu; Tervo, Jyrki; Sirén, Mika2008 Friction Stir Welding of High Temperature Materials, Kuuma, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2008 New Amorphous Alloys in Metal Layers
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2008 Hot Cracking and Environment-assisted Cracking Susceptibility of Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Gripenberg, Hans; Toivonen, Aki; Ehrnsten, Ulla; Aaltonen, Pertti2007 Mechanical Characterisation of Austenitic Stainless Steels and Inconel Alloys under Dynamic Strain Aging Conditions
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 Residual Stress Measurements of Copper Canister EB-welds
Gripenberg, Hans; Hänninen, Hannu2006 Dissimilar Metal Weld Joints and their Performance in Nuclear Power Plant and Oil Refinery Conditions
Hänninen, Hannu; Aaltonen, Pertti; Brederholm, Anssi; Ehrnstén, Ulla; Gripenberg, Hans; Toivonen, Aki; Pitkänen, Jorma; Virkkunen, Iikka2006 Dynamic Strain Aging of Nuclear Power Plant Materials
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Hänninen, Hannu2006 Hitsaushuurun vähentäminen teollisuudessa
Koskinen, Ari; Schimberg, R.; Hänninen, Hannu2006 Hitsaamon pienhiukkaset - Fine Particles in Welding Workshop
Koskinen, Ari; Hänninen, Hannu2006 Thermal Fatigue Testing of the PWR Secondary Circuit Piping
Mononen, Janne; Virkkunen, Iikka; Hänninen, Hannu2006 Microstructure of Friction Stir Welded Copper Joints
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2006 Hitsaushuurun pienhiukkaset ja niiden terveydelliset vaikutukset
Keränen, Marko; Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2005 Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking
Petterson, R.; Flyg, J.; Wessman, S.; Herting, G.; Ibrahim, N.; Fatehi, K.; Qvarfot, R.; Lo Piccolo, E.; Scoppio, L.; Ladwein, T.; Ligier, V.; Coudreuse, L.; Matres Serrano, V.; Hochölter, G.; Kristzt, K.; Richter, A.; Kivisäkk, U.; Leinonen, H.; Kinnunen, T.; Varis, P.; Nöjd, K.; Ohligschläger, T.; Virkkunen, Iikka; Hänninen, Hannu; Romu, Jyrki; Taulavuori, T.2005 Selvitys: Soodakattila tulevaisuudessa materiaalivaihtoehtojen valinta osaprojekti
Pohjanne, P.; Hänninen, Hannu; Kiesi, Timo2005 Copper-carbon Composites
Romu, Jyrki; Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Materials Selection for High Temperature Applications
Savolainen, Kati; Mononen, Janne; Ilola, Risto; Hänninen, Hannu2005 Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet
Romu, Jyrki; Hänninen, Hannu2004 Katalyyttipinnat ja niiden valmistus
Ilola, Risto; Romu, Jyrki; Papula, Suvi; Hänninen, Hannu2003 Narrow Gap Arc Welding Experiments of Thick Copper Sections
Pohja, Rami; Vestman, Heikki; Jauhiainen, Petra; Hänninen, Hannu2003 Rakenteiden keventäminen termomekaanisesti valmistettuja teräksiä käyttämällä (TERMO)
Brederholm, Anssi; Nevasmaa, Pekka; Laukkanen, Anssi; Wallin, Kim; Nenonen, Pertti; Gripenberg, Hans; Karppi, Risto; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; Japanin matkakertomus
Hänninen, Hannu; Tiitinen, Eero; Tanaka, Toshi; Kiesi, Timo2002 GT-MAT: Kaasuturbiinien materiaalit: Inconel 738 LC superseoksen termisen väsymisen kestävyys ja vaurioasteen arviointi ainettarikkomattomasti
Kemppainen, Mika; Aalto, Miikka; Hänninen, Hannu2002 Pinnoitushitsaus eri menetelmillä
Keränen, Marko; Luukas, Mikko; Kasurinen, Heikki; Kakko, Ago; Hänninen, Hannu2002 Kapearailohitsaus perinteisillä menetelmillä
Paljakka, Vivi; Korhonen, Mika; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; rakennusasteen noston vaikutukset materiaalin valintaan, materiaalitutkimus
Pohjanne, Pekka; Hänninen, Hannu; Kiesi, Timo2002 Superplasticity in stainless steels
Romu, Jyrki; Hänninen, Hannu2002 Precipitation of secondary phases in Duplok 27 stainless steel with emphasis on copper effects
Smuk, Olena; Nenonen, Pertti; Hänninen, Hannu; Liimatainen, Jari2002 Corrosion Resistance of Welded Stainless Steels in Salt Spray Chanber Tests and Road Conditions
Alenius, Marko; Kyröläinen, A.; Vilpas, Martti; Hänninen, Hannu2001 Effects of EDM on Surface Residual Stresses in a TMCP Steel
Gripenberg, H.; Siiriäinen, J.; Saukkonen, T.; Hänninen, Hannu2000 Termisesti väsytettyjen kaasuturbiinimateriaalien karakterisointi: tulokset väsytyskokeista, rikkovasta tarkastuksesta sekä jäännösjännitys- ja röntgendiffraktiomittauksista
Kemppainen, M.; Hänninen, Hannu2000 Design and Implementation of Ring-Core Method for Residual Stress Measurement
Siiriäinen, J.; Gripenberg, H.; Hänninen, Hannu2000 Residual Stresses Induced by Cyclic Thermal Loads
Virkkunen, I.; Kemppainen, M.; Hänninen, Hannu2000 Fabrication and properties of stainless steel sandwich structures
Alenius, M.; Hänninen, H.1999 Kaasuturbiinien korkean lämpötilan vaurioitumismekanismit
Kemppainen, M.; Hänninen, H.1999 Hitsatut ja hipatut paksut pinnoitteet korkean lämpötilan sovelluksissa
Viitala, T.; Hänninen, H.1999 The effect of sulphate on crack growth rates in stainless steel and alloy 182 weld metal in BWR environment
Aaltonen, P.; Ehrnsten, U.; Hänninen, H.1998 Proceedings of the NI-seminar "Stainless Steels in Transport Industry" February 4-5. 1998
Alenius, M.; Lokka, M.; Hänninen, H.1998 Esiselvitys soodakattilan uusista rakennemateriaaleista
Hänninen, H.; Pohjanne, P.; Laitinen, A.; Saarinen, P.1998 Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Jagodzinski, yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Internal Friction Study of Interstitial Behaviour in Low Activated Martensitic F82H Steel
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Tähtinen, S.; Hänninen, H.1998 Kilpailukykyinen hitsaustuotanto: kustannus ja laatutehokkuus
Karppi, R.; Brederholm, A.; Hänninen, H.1998 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCil2 solution
Leinonen, H.; Hänninen, H.1998 Elastic behaviour of nitrogen alloyed austenitic stainless steels
Tervo, J.; Tasarenko, A.; Hänninen, H.1998 Kaasuturpiinit - esiselvitys
Auerkari, P.; Heikinheimo, L.; Korpiola, K.; Kauppinen, P.; Lepistö, T.; Vuoristo, P.; Hänninen, H.; Virkkunen, I.1997 Low temperature sensitisation of austenitic stainless steels
Ehrnstén, U.; Aaltonen, P.; Hänninen, H.1997 Ruostumattomat teräkset kuljetusvälineissä - Teollisuussovellukset
Lahti, K.; Vilpas, M.; Heikonen, M.; Lokka, M.; Hänninen, H.1997 Thermal fatigue of recovery boiler composite tube
Saarinen, P.; Hänninen, H.1997 The use of stainless steels in transport vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Heikonen, M.; Alenius, M.; Hänninen, H.1997 Phase Transformations and Relaxation Phenomena in Hydrogen-Charged CrNiMn and CrNi Stable Austenitic Stainless Steel
Gavriljuk, V.G.; Hänninen, H.; Smouk, S.Yu; Tarasenko, A.V.; Tereshchenko, A.S.; Ullakko, K.1996 Kompound materiaalit
Hänninen, H.1996 Kompound-putken termisen ruiskupinnoitteen karakterisointi
Ilola, R.; Hänninen, H.1996 Ruostumattoman 12%Cr RHS-putkipalkin pienaliitoksen väsymiskestävyys
Lahti, K.; Hänninen, H.; Vilpas, M.1996 Stainless for Transport - Milestone report 1.10.1993 - 30.9.1995
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Stainless for Transport
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Properties of NKK-Serena Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1995 Funktionaaliset materiaalit ja älykkäät rakenteet koneenrakennuksessa
Brederholm, A.; Ullakko, K.; Hänninen, H.1995 HIPed P/M Duplex Stainless Steels
Hämäläinen, Esa; Hänninen, H.; Liimatainen, J.1995 HIPped/ P/M Maraging steels
Nieminen, M.; Hänninen, H.; Liimatainen, J.1995 HIPed P/M High Nirtogen Austenitic Stainless Steels
Tervo, J.; Romu, Jyrki; Hänninen, H.; Liimatainen, J.1995 Elinjaksokustannus- ja elinkaarianalyysi ja niiden soveltaminen materiaalinvalinnassa
Lokka, M.; Hänninen, H.1994 Nitrogen Alloyed Martensitic Steels
Romu, J.; Liu, Y.; Hänninen, H.1994 The Use of Narrow-Gap Welding for Stabilized Stainless Steel Pipings - A Literature Survey
Vilpas, M.; Pelli, R.; Aaltonen, P.; Hänninen, H.1994 Cyclic Crack Growth Evaluation of a 20MnMoNi55 Piping Steel in High-Oxygen Reactor Water
Aaltonen, P.; Rintamaa, R.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 ICG-EAC Bolt-loaded WOL-Specimen Round Robin results on VTT for RPV-steel Weldments Tested in PWR Water
Aaltonen, P.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 Thermal Fatigue - A Literature Review
Bartsch, K.; Hänninen, H.; Nieminen, M.1993 Materiaalin valinnan asiantuntijajärjestelmät, vaativien rakenteiden materiaalitekniikka
Hänninen, H.1993 Typpiseostuksen vaikutus ruostumattomien terästen ominaisuuksiin
Nieminen, M.; Hänninen, H.1993 High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies
Romu, J.; Hänninen, H.1993 Ydinvoimalaitosten paineastiaterästen vetyhaurauden ja säteilyhaurastumisen yhteisvaikutukset
Hänninen, H.1992 Pulverimetallurgisesti valmistettujen maraging-terästen ominaisuudet
Laitinen, Eero; Nieminen, Markku; Hänninen, H.1992 Muotohitsaus, menetelmät, käyttöperusteet ja tulevaisuudennäkymät
Niini, E.; Vartiainen, S.; Vilpas, M.; Hänninen, H.1992 Ruostumattomien terästen jännityskorroosion ja korroosioväsymisen estäminen
Pohjanne, P.; Hänninen, H.1992 Austeniittisen ja duplex ruostumattomien terästen jännityskorroosio ja korroosioväsyminen kuumissa kloridiliuoksissa
Pohjanne, P.; Hänninen, H.1992 Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Nenonen, P.; Ehrnsten, U.1992 Overview of the Nuclear Power Plant Structural Integrity Research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, H.; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.1992 Patents and invention disclosures
PatentMethod for Producing Defects and Tensile Residual Stresses
Elfving, K.; Hänninen, Hannu; Kemppainen, Mika; Saarinen, P.; Virkkunen, Iikka2004 TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Antin, Kim-Niklas; Talonen, Juho; Hänninen, Hannu; Singh, Preet2014 Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Kemppainen, H.; Hänninen, Hannu; Törrönen, K.; Salonen, S.1982 in ULTRAMICROSCOPY (Elsevier Science B.V.)ISSN: 0304-3991
Influence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Actuation of magnetic shape memory alloys at low temperatures
Enhanced Fatigue Behavior of Ni-Mn-Ga Magnetic Shape Memory Alloys with Tailor-made Fine Twin Microstructure
EAC Susceptibility of Nickel Based Weld Metals in Doped Steam
Statistical Aspects of Fatigue and Fracture
Publications intended for professional communities
Article in professional journalKäyttövarmuutta kattiloihin uusilla materiaalivaihtoehdoilla
Tuurna, Satu; Romu, Jyrki; Hänninen, Hannu; Mahanen, Jouni; Puikkonen, Tony2017 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hydrogen effects on mechanical properties of reduced activation ferrite-martensite and ODS-RAFM steels
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Hänninen, Hannu2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Ultralujien rakenneterästen hitsattavuus ja hitsausliitosten ominaisuudet
Peltonen, Mikko; Kukkonen, Akseli; Nummela, Sami; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinjätekapselin kuparivaippa: kestääkö, syökö korroosio, murtaako vety?
Rantala, Juhani; Hänninen, Hannu; Aromaa, Jari; Carpén, Leena; Rajala, Pauliina2015 in ATS Ydintekniikka (TKK, MTR 1)ISSN: 0356-0473Aalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Aalto-yliopiston opetus- ja tutkimustoiminta hitsaustekniikan eturintamassa
Vilaça, Pedro; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (TKK, MTR 1)ISSN: 0437-6056Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Hänninen, Hannu2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Ydinvoimalaitosten vaativien ruostumattomista teräksistä valmistettujen komponenttien hitsaus
Aaltonen, Pertti; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Ukkonen, A.; Hänninen, Hannu2004 in HITSAUSTEKNIIKKA (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Friction Stir Weldability of Copper Alloys
Savolainen, Kati; Mononen, Jukka; Saukkonen, Tapio; Hänninen, Hannu; Koivula, Jouko2004 in Welder (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels.
Paro, Jukka; Hänninen, Hannu; Kauppinen, Veijo2001 in WEAR (Elsevier BV)ISSN: 0043-1648Stainless steel research in the laboratory of Engineering Materials
Hänninen, H.1997 in Polysteekki (Elsevier BV)ISSN: 1455-9595Termomekaanisesti valssatun lujan RAEX 500 M teräksen hitsaus
Kotamies, J.; Brederholm, A.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Uusien ruostumattimien 12%Cr terästen hitsaus
Lokka, M.; Lahti, K.; Vilpas, M.; Hänninen, H.1996 in HITSAUSTEKNIIKKA (Elsevier BV)Adhesive wear of high nitrogen austenitic stainless steels
Tervo, J.; Hänninen, H.; Ylöstalo, O.; Liimatainen, J.1994 in TRIBOLOGIA (Suomen Tribologiayhdistys)Article in professional conference proceedingsEffect of welding conditions on the hot cracking susceptibility of carbon steel
Amaya, Toru; Yonezawa, Toshio; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu2016 Modelling fracture behaviour of high strength low alloy steel with microstructural FE model and crystal plasticity
Andersson, Tom; Laukkanen, Anssi; Sippola, Merja; Saukkonen, Tapio; Hänninen, Hannu2016 Thermal aging induced phase transformations in nuclear grade type 316L stainless steel weld metals
Ivanchenko, Mykola; Ehrnstén, Ulla; Forsström, Antti; Hänninen, Hannu; Ballinger, Ronald2016 Hydrogen absorption and behavior in copper as a result of corrosion reactions and γ-radiation in spent nuclear fuel repository conditions
Yagodzinskyy, Yuriy; Hänninen, Hannu2016 Hot cracking susceptibility evaluation of Alloy 52 and 152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Hänninen, Hannu; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi2016 Hot cracking susceptibility evaluation of Alloy 52/152 weld metals and their improvement
Yonezawa, Toshio; Miyahara, Yuichi; Peltonen, Mikko; Sarikka, Teemu; Brederholm, Anssi; Hänninen, Hannu2016 Characterization of strain localization in metastable austenitic stainless steel by digital image correlation
Antin, Kim-Niklas; Talonen, Juho; Bossuyt, Sven; Hänninen, Hannu2015 Computational estimation of risk of hot cracking in narrow gap welding
Keinänen, Heikki; Hänninen, Hannu; Sarikka, Teemu2015 Published development or research reportStructural integrity of Ni-base alloy welds
Hänninen, Hannu; Brederholm, Anssi; Sarikka, Teemu; Mouginot, Roman; Holmström, Petra; Saukkonen, Tapio; Toivonen, Aki; Karjalainen-Roikonen, Päivi; Nevasmaa, Pekka; Keinänen, Heikki; Leskelä, Esa; Ahonen, Matias; Ehrnstén, Ulla; Aaltonen, Pertti2014 Microstructures of nickel-base alloy dissimilar metal welds
Mouginot, Roman; Hänninen, Hannu2013 Materials Science and Technology - Nuclear Materials, Advanced Course
Hänninen, Hannu; Kiesi, Timo2012 Hydrogen Sensitivity of Different Advanced High Strength Microstructures (HYDRAMICROS)
Hickel, Tilmann; Duprez, L.; Hänninen, Hannu; Thiessen, R.; Mraczek, K.2011 Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2011 White Paper on Crack Initiation of Structural Materials in LWRs
Rik-Wouter, B.; Kilian, R.; Oijerholm, J.; Horner, T.; Raquet, O.; Ehrnsten, U.; Martin, O.; Novotny, R.; Ritter, S.; Perosanz, F.; Wessels, J.; Hänninen, H.2011 Toughness Properties of Ferritic Stainless Steels
Levonmaa, Raimo; Hänninen, Hannu; Romu, Jyrki2010 Properties of FeCrAl Alloys and Austenitic Stainless Steel for Boiler Environments
Pohja, Rami; Hänninen, Hannu2010 State-of-the-art of thermoelectric materials processing
Tervo, Jyrki; Manninen, Antti; Ilola, Risto; Hänninen, Hannu2009 Friction Stir Welding, Stir, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu; Api, Marko; Keinänen, Heikki; Martikainen, Hannu; Tervo, Jyrki; Sirén, Mika2008 Friction Stir Welding of High Temperature Materials, Kuuma, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2008 New Amorphous Alloys in Metal Layers
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2008 Hot Cracking and Environment-assisted Cracking Susceptibility of Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Gripenberg, Hans; Toivonen, Aki; Ehrnsten, Ulla; Aaltonen, Pertti2007 Mechanical Characterisation of Austenitic Stainless Steels and Inconel Alloys under Dynamic Strain Aging Conditions
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 Residual Stress Measurements of Copper Canister EB-welds
Gripenberg, Hans; Hänninen, Hannu2006 Dissimilar Metal Weld Joints and their Performance in Nuclear Power Plant and Oil Refinery Conditions
Hänninen, Hannu; Aaltonen, Pertti; Brederholm, Anssi; Ehrnstén, Ulla; Gripenberg, Hans; Toivonen, Aki; Pitkänen, Jorma; Virkkunen, Iikka2006 Dynamic Strain Aging of Nuclear Power Plant Materials
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Hänninen, Hannu2006 Hitsaushuurun vähentäminen teollisuudessa
Koskinen, Ari; Schimberg, R.; Hänninen, Hannu2006 Hitsaamon pienhiukkaset - Fine Particles in Welding Workshop
Koskinen, Ari; Hänninen, Hannu2006 Thermal Fatigue Testing of the PWR Secondary Circuit Piping
Mononen, Janne; Virkkunen, Iikka; Hänninen, Hannu2006 Microstructure of Friction Stir Welded Copper Joints
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2006 Hitsaushuurun pienhiukkaset ja niiden terveydelliset vaikutukset
Keränen, Marko; Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2005 Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking
Petterson, R.; Flyg, J.; Wessman, S.; Herting, G.; Ibrahim, N.; Fatehi, K.; Qvarfot, R.; Lo Piccolo, E.; Scoppio, L.; Ladwein, T.; Ligier, V.; Coudreuse, L.; Matres Serrano, V.; Hochölter, G.; Kristzt, K.; Richter, A.; Kivisäkk, U.; Leinonen, H.; Kinnunen, T.; Varis, P.; Nöjd, K.; Ohligschläger, T.; Virkkunen, Iikka; Hänninen, Hannu; Romu, Jyrki; Taulavuori, T.2005 Selvitys: Soodakattila tulevaisuudessa materiaalivaihtoehtojen valinta osaprojekti
Pohjanne, P.; Hänninen, Hannu; Kiesi, Timo2005 Copper-carbon Composites
Romu, Jyrki; Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Materials Selection for High Temperature Applications
Savolainen, Kati; Mononen, Janne; Ilola, Risto; Hänninen, Hannu2005 Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet
Romu, Jyrki; Hänninen, Hannu2004 Katalyyttipinnat ja niiden valmistus
Ilola, Risto; Romu, Jyrki; Papula, Suvi; Hänninen, Hannu2003 Narrow Gap Arc Welding Experiments of Thick Copper Sections
Pohja, Rami; Vestman, Heikki; Jauhiainen, Petra; Hänninen, Hannu2003 Rakenteiden keventäminen termomekaanisesti valmistettuja teräksiä käyttämällä (TERMO)
Brederholm, Anssi; Nevasmaa, Pekka; Laukkanen, Anssi; Wallin, Kim; Nenonen, Pertti; Gripenberg, Hans; Karppi, Risto; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; Japanin matkakertomus
Hänninen, Hannu; Tiitinen, Eero; Tanaka, Toshi; Kiesi, Timo2002 GT-MAT: Kaasuturbiinien materiaalit: Inconel 738 LC superseoksen termisen väsymisen kestävyys ja vaurioasteen arviointi ainettarikkomattomasti
Kemppainen, Mika; Aalto, Miikka; Hänninen, Hannu2002 Pinnoitushitsaus eri menetelmillä
Keränen, Marko; Luukas, Mikko; Kasurinen, Heikki; Kakko, Ago; Hänninen, Hannu2002 Kapearailohitsaus perinteisillä menetelmillä
Paljakka, Vivi; Korhonen, Mika; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; rakennusasteen noston vaikutukset materiaalin valintaan, materiaalitutkimus
Pohjanne, Pekka; Hänninen, Hannu; Kiesi, Timo2002 Superplasticity in stainless steels
Romu, Jyrki; Hänninen, Hannu2002 Precipitation of secondary phases in Duplok 27 stainless steel with emphasis on copper effects
Smuk, Olena; Nenonen, Pertti; Hänninen, Hannu; Liimatainen, Jari2002 Corrosion Resistance of Welded Stainless Steels in Salt Spray Chanber Tests and Road Conditions
Alenius, Marko; Kyröläinen, A.; Vilpas, Martti; Hänninen, Hannu2001 Effects of EDM on Surface Residual Stresses in a TMCP Steel
Gripenberg, H.; Siiriäinen, J.; Saukkonen, T.; Hänninen, Hannu2000 Termisesti väsytettyjen kaasuturbiinimateriaalien karakterisointi: tulokset väsytyskokeista, rikkovasta tarkastuksesta sekä jäännösjännitys- ja röntgendiffraktiomittauksista
Kemppainen, M.; Hänninen, Hannu2000 Design and Implementation of Ring-Core Method for Residual Stress Measurement
Siiriäinen, J.; Gripenberg, H.; Hänninen, Hannu2000 Residual Stresses Induced by Cyclic Thermal Loads
Virkkunen, I.; Kemppainen, M.; Hänninen, Hannu2000 Fabrication and properties of stainless steel sandwich structures
Alenius, M.; Hänninen, H.1999 Kaasuturbiinien korkean lämpötilan vaurioitumismekanismit
Kemppainen, M.; Hänninen, H.1999 Hitsatut ja hipatut paksut pinnoitteet korkean lämpötilan sovelluksissa
Viitala, T.; Hänninen, H.1999 The effect of sulphate on crack growth rates in stainless steel and alloy 182 weld metal in BWR environment
Aaltonen, P.; Ehrnsten, U.; Hänninen, H.1998 Proceedings of the NI-seminar "Stainless Steels in Transport Industry" February 4-5. 1998
Alenius, M.; Lokka, M.; Hänninen, H.1998 Esiselvitys soodakattilan uusista rakennemateriaaleista
Hänninen, H.; Pohjanne, P.; Laitinen, A.; Saarinen, P.1998 Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Jagodzinski, yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Internal Friction Study of Interstitial Behaviour in Low Activated Martensitic F82H Steel
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Tähtinen, S.; Hänninen, H.1998 Kilpailukykyinen hitsaustuotanto: kustannus ja laatutehokkuus
Karppi, R.; Brederholm, A.; Hänninen, H.1998 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCil2 solution
Leinonen, H.; Hänninen, H.1998 Elastic behaviour of nitrogen alloyed austenitic stainless steels
Tervo, J.; Tasarenko, A.; Hänninen, H.1998 Kaasuturpiinit - esiselvitys
Auerkari, P.; Heikinheimo, L.; Korpiola, K.; Kauppinen, P.; Lepistö, T.; Vuoristo, P.; Hänninen, H.; Virkkunen, I.1997 Low temperature sensitisation of austenitic stainless steels
Ehrnstén, U.; Aaltonen, P.; Hänninen, H.1997 Ruostumattomat teräkset kuljetusvälineissä - Teollisuussovellukset
Lahti, K.; Vilpas, M.; Heikonen, M.; Lokka, M.; Hänninen, H.1997 Thermal fatigue of recovery boiler composite tube
Saarinen, P.; Hänninen, H.1997 The use of stainless steels in transport vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Heikonen, M.; Alenius, M.; Hänninen, H.1997 Phase Transformations and Relaxation Phenomena in Hydrogen-Charged CrNiMn and CrNi Stable Austenitic Stainless Steel
Gavriljuk, V.G.; Hänninen, H.; Smouk, S.Yu; Tarasenko, A.V.; Tereshchenko, A.S.; Ullakko, K.1996 Kompound materiaalit
Hänninen, H.1996 Kompound-putken termisen ruiskupinnoitteen karakterisointi
Ilola, R.; Hänninen, H.1996 Ruostumattoman 12%Cr RHS-putkipalkin pienaliitoksen väsymiskestävyys
Lahti, K.; Hänninen, H.; Vilpas, M.1996 Stainless for Transport - Milestone report 1.10.1993 - 30.9.1995
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Stainless for Transport
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Properties of NKK-Serena Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1995 Funktionaaliset materiaalit ja älykkäät rakenteet koneenrakennuksessa
Brederholm, A.; Ullakko, K.; Hänninen, H.1995 HIPed P/M Duplex Stainless Steels
Hämäläinen, Esa; Hänninen, H.; Liimatainen, J.1995 HIPped/ P/M Maraging steels
Nieminen, M.; Hänninen, H.; Liimatainen, J.1995 HIPed P/M High Nirtogen Austenitic Stainless Steels
Tervo, J.; Romu, Jyrki; Hänninen, H.; Liimatainen, J.1995 Elinjaksokustannus- ja elinkaarianalyysi ja niiden soveltaminen materiaalinvalinnassa
Lokka, M.; Hänninen, H.1994 Nitrogen Alloyed Martensitic Steels
Romu, J.; Liu, Y.; Hänninen, H.1994 The Use of Narrow-Gap Welding for Stabilized Stainless Steel Pipings - A Literature Survey
Vilpas, M.; Pelli, R.; Aaltonen, P.; Hänninen, H.1994 Cyclic Crack Growth Evaluation of a 20MnMoNi55 Piping Steel in High-Oxygen Reactor Water
Aaltonen, P.; Rintamaa, R.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 ICG-EAC Bolt-loaded WOL-Specimen Round Robin results on VTT for RPV-steel Weldments Tested in PWR Water
Aaltonen, P.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 Thermal Fatigue - A Literature Review
Bartsch, K.; Hänninen, H.; Nieminen, M.1993 Materiaalin valinnan asiantuntijajärjestelmät, vaativien rakenteiden materiaalitekniikka
Hänninen, H.1993 Typpiseostuksen vaikutus ruostumattomien terästen ominaisuuksiin
Nieminen, M.; Hänninen, H.1993 High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies
Romu, J.; Hänninen, H.1993 Ydinvoimalaitosten paineastiaterästen vetyhaurauden ja säteilyhaurastumisen yhteisvaikutukset
Hänninen, H.1992 Pulverimetallurgisesti valmistettujen maraging-terästen ominaisuudet
Laitinen, Eero; Nieminen, Markku; Hänninen, H.1992 Muotohitsaus, menetelmät, käyttöperusteet ja tulevaisuudennäkymät
Niini, E.; Vartiainen, S.; Vilpas, M.; Hänninen, H.1992 Ruostumattomien terästen jännityskorroosion ja korroosioväsymisen estäminen
Pohjanne, P.; Hänninen, H.1992 Austeniittisen ja duplex ruostumattomien terästen jännityskorroosio ja korroosioväsyminen kuumissa kloridiliuoksissa
Pohjanne, P.; Hänninen, H.1992 Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Nenonen, P.; Ehrnsten, U.1992 Overview of the Nuclear Power Plant Structural Integrity Research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, H.; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.1992 Patents and invention disclosures
PatentMethod for Producing Defects and Tensile Residual Stresses
Elfving, K.; Hänninen, Hannu; Kemppainen, Mika; Saarinen, P.; Virkkunen, Iikka2004 TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Antin, Kim-Niklas; Talonen, Juho; Hänninen, Hannu; Singh, Preet2014 Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Kemppainen, H.; Hänninen, Hannu; Törrönen, K.; Salonen, S.1982 in ULTRAMICROSCOPY (Elsevier Science B.V.)ISSN: 0304-3991
Käyttövarmuutta kattiloihin uusilla materiaalivaihtoehdoilla
Hydrogen effects on mechanical properties of reduced activation ferrite-martensite and ODS-RAFM steels
Ultralujien rakenneterästen hitsattavuus ja hitsausliitosten ominaisuudet
Ydinjätekapselin kuparivaippa: kestääkö, syökö korroosio, murtaako vety?
Aalto University: Research and Education in Welded Structures
Aalto-yliopiston opetus- ja tutkimustoiminta hitsaustekniikan eturintamassa
Hitsaustutkimus Aalto-yliopistossa
Ydinvoimalaitosten materiaalit ja hitsatut rakenteet
Ydinvoimalaitosten vaativien ruostumattomista teräksistä valmistettujen komponenttien hitsaus
Hitsaamon pienhiukkaset
Friction Stir Weldability of Copper Alloys
Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels.
Stainless steel research in the laboratory of Engineering Materials
Termomekaanisesti valssatun lujan RAEX 500 M teräksen hitsaus
Uusien ruostumattimien 12%Cr terästen hitsaus
Adhesive wear of high nitrogen austenitic stainless steels
Effect of welding conditions on the hot cracking susceptibility of carbon steel
Modelling fracture behaviour of high strength low alloy steel with microstructural FE model and crystal plasticity
Thermal aging induced phase transformations in nuclear grade type 316L stainless steel weld metals
Hydrogen absorption and behavior in copper as a result of corrosion reactions and γ-radiation in spent nuclear fuel repository conditions
Hot cracking susceptibility evaluation of Alloy 52 and 152 weld metals and their improvement
Hot cracking susceptibility evaluation of Alloy 52/152 weld metals and their improvement
Characterization of strain localization in metastable austenitic stainless steel by digital image correlation
Computational estimation of risk of hot cracking in narrow gap welding
Published development or research reportStructural integrity of Ni-base alloy welds
Hänninen, Hannu; Brederholm, Anssi; Sarikka, Teemu; Mouginot, Roman; Holmström, Petra; Saukkonen, Tapio; Toivonen, Aki; Karjalainen-Roikonen, Päivi; Nevasmaa, Pekka; Keinänen, Heikki; Leskelä, Esa; Ahonen, Matias; Ehrnstén, Ulla; Aaltonen, Pertti2014 Microstructures of nickel-base alloy dissimilar metal welds
Mouginot, Roman; Hänninen, Hannu2013 Materials Science and Technology - Nuclear Materials, Advanced Course
Hänninen, Hannu; Kiesi, Timo2012 Hydrogen Sensitivity of Different Advanced High Strength Microstructures (HYDRAMICROS)
Hickel, Tilmann; Duprez, L.; Hänninen, Hannu; Thiessen, R.; Mraczek, K.2011 Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Ivanchenko, Mykola; Toivonen, Aki; Karlsen, Wade; Ehrnsten, Ulla; Aaltonen, Pertti2011 White Paper on Crack Initiation of Structural Materials in LWRs
Rik-Wouter, B.; Kilian, R.; Oijerholm, J.; Horner, T.; Raquet, O.; Ehrnsten, U.; Martin, O.; Novotny, R.; Ritter, S.; Perosanz, F.; Wessels, J.; Hänninen, H.2011 Toughness Properties of Ferritic Stainless Steels
Levonmaa, Raimo; Hänninen, Hannu; Romu, Jyrki2010 Properties of FeCrAl Alloys and Austenitic Stainless Steel for Boiler Environments
Pohja, Rami; Hänninen, Hannu2010 State-of-the-art of thermoelectric materials processing
Tervo, Jyrki; Manninen, Antti; Ilola, Risto; Hänninen, Hannu2009 Friction Stir Welding, Stir, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu; Api, Marko; Keinänen, Heikki; Martikainen, Hannu; Tervo, Jyrki; Sirén, Mika2008 Friction Stir Welding of High Temperature Materials, Kuuma, Final Report
Mononen, Jukka; Savolainen, Kati; Saukkonen, Tapio; Hänninen, Hannu2008 New Amorphous Alloys in Metal Layers
Soinila, Erno; Sharma, Parmanand; Heino, Markku; Pischow, Kaj; Inoue, Akihisa; Hänninen, Hannu2008 Hot Cracking and Environment-assisted Cracking Susceptibility of Dissimilar Metal Welds
Hänninen, Hannu; Brederholm, Anssi; Saukkonen, Tapio; Gripenberg, Hans; Toivonen, Aki; Ehrnsten, Ulla; Aaltonen, Pertti2007 Mechanical Characterisation of Austenitic Stainless Steels and Inconel Alloys under Dynamic Strain Aging Conditions
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2007 Residual Stress Measurements of Copper Canister EB-welds
Gripenberg, Hans; Hänninen, Hannu2006 Dissimilar Metal Weld Joints and their Performance in Nuclear Power Plant and Oil Refinery Conditions
Hänninen, Hannu; Aaltonen, Pertti; Brederholm, Anssi; Ehrnstén, Ulla; Gripenberg, Hans; Toivonen, Aki; Pitkänen, Jorma; Virkkunen, Iikka2006 Dynamic Strain Aging of Nuclear Power Plant Materials
Ivanchenko, Mykola; Yagodzinskyy, Yuriy; Hänninen, Hannu2006 Hitsaamon pienhiukkaset
Koskinen, Ari; Kasurinen, Heikki; Hänninen, Hannu2006 Hitsaushuurun vähentäminen teollisuudessa
Koskinen, Ari; Schimberg, R.; Hänninen, Hannu2006 Hitsaamon pienhiukkaset - Fine Particles in Welding Workshop
Koskinen, Ari; Hänninen, Hannu2006 Thermal Fatigue Testing of the PWR Secondary Circuit Piping
Mononen, Janne; Virkkunen, Iikka; Hänninen, Hannu2006 Microstructure of Friction Stir Welded Copper Joints
Saukkonen, Tapio; Savolainen, Kati; Hänninen, Hannu2006 Hitsaushuurun pienhiukkaset ja niiden terveydelliset vaikutukset
Keränen, Marko; Kasurinen, Heikki; Koskinen, Ari; Hänninen, Hannu2005 Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking
Petterson, R.; Flyg, J.; Wessman, S.; Herting, G.; Ibrahim, N.; Fatehi, K.; Qvarfot, R.; Lo Piccolo, E.; Scoppio, L.; Ladwein, T.; Ligier, V.; Coudreuse, L.; Matres Serrano, V.; Hochölter, G.; Kristzt, K.; Richter, A.; Kivisäkk, U.; Leinonen, H.; Kinnunen, T.; Varis, P.; Nöjd, K.; Ohligschläger, T.; Virkkunen, Iikka; Hänninen, Hannu; Romu, Jyrki; Taulavuori, T.2005 Selvitys: Soodakattila tulevaisuudessa materiaalivaihtoehtojen valinta osaprojekti
Pohjanne, P.; Hänninen, Hannu; Kiesi, Timo2005 Copper-carbon Composites
Romu, Jyrki; Yagodzinskyy, Yuriy; Hänninen, Hannu2005 Materials Selection for High Temperature Applications
Savolainen, Kati; Mononen, Janne; Ilola, Risto; Hänninen, Hannu2005 Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet
Romu, Jyrki; Hänninen, Hannu2004 Katalyyttipinnat ja niiden valmistus
Ilola, Risto; Romu, Jyrki; Papula, Suvi; Hänninen, Hannu2003 Narrow Gap Arc Welding Experiments of Thick Copper Sections
Pohja, Rami; Vestman, Heikki; Jauhiainen, Petra; Hänninen, Hannu2003 Rakenteiden keventäminen termomekaanisesti valmistettuja teräksiä käyttämällä (TERMO)
Brederholm, Anssi; Nevasmaa, Pekka; Laukkanen, Anssi; Wallin, Kim; Nenonen, Pertti; Gripenberg, Hans; Karppi, Risto; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; Japanin matkakertomus
Hänninen, Hannu; Tiitinen, Eero; Tanaka, Toshi; Kiesi, Timo2002 GT-MAT: Kaasuturbiinien materiaalit: Inconel 738 LC superseoksen termisen väsymisen kestävyys ja vaurioasteen arviointi ainettarikkomattomasti
Kemppainen, Mika; Aalto, Miikka; Hänninen, Hannu2002 Pinnoitushitsaus eri menetelmillä
Keränen, Marko; Luukas, Mikko; Kasurinen, Heikki; Kakko, Ago; Hänninen, Hannu2002 Kapearailohitsaus perinteisillä menetelmillä
Paljakka, Vivi; Korhonen, Mika; Hänninen, Hannu2002 Soodakattila tulevaisuudessa - esiselvitysraportit; rakennusasteen noston vaikutukset materiaalin valintaan, materiaalitutkimus
Pohjanne, Pekka; Hänninen, Hannu; Kiesi, Timo2002 Superplasticity in stainless steels
Romu, Jyrki; Hänninen, Hannu2002 Precipitation of secondary phases in Duplok 27 stainless steel with emphasis on copper effects
Smuk, Olena; Nenonen, Pertti; Hänninen, Hannu; Liimatainen, Jari2002 Corrosion Resistance of Welded Stainless Steels in Salt Spray Chanber Tests and Road Conditions
Alenius, Marko; Kyröläinen, A.; Vilpas, Martti; Hänninen, Hannu2001 Effects of EDM on Surface Residual Stresses in a TMCP Steel
Gripenberg, H.; Siiriäinen, J.; Saukkonen, T.; Hänninen, Hannu2000 Termisesti väsytettyjen kaasuturbiinimateriaalien karakterisointi: tulokset väsytyskokeista, rikkovasta tarkastuksesta sekä jäännösjännitys- ja röntgendiffraktiomittauksista
Kemppainen, M.; Hänninen, Hannu2000 Design and Implementation of Ring-Core Method for Residual Stress Measurement
Siiriäinen, J.; Gripenberg, H.; Hänninen, Hannu2000 Residual Stresses Induced by Cyclic Thermal Loads
Virkkunen, I.; Kemppainen, M.; Hänninen, Hannu2000 Fabrication and properties of stainless steel sandwich structures
Alenius, M.; Hänninen, H.1999 Kaasuturbiinien korkean lämpötilan vaurioitumismekanismit
Kemppainen, M.; Hänninen, H.1999 Hitsatut ja hipatut paksut pinnoitteet korkean lämpötilan sovelluksissa
Viitala, T.; Hänninen, H.1999 The effect of sulphate on crack growth rates in stainless steel and alloy 182 weld metal in BWR environment
Aaltonen, P.; Ehrnsten, U.; Hänninen, H.1998 Proceedings of the NI-seminar "Stainless Steels in Transport Industry" February 4-5. 1998
Alenius, M.; Lokka, M.; Hänninen, H.1998 Esiselvitys soodakattilan uusista rakennemateriaaleista
Hänninen, H.; Pohjanne, P.; Laitinen, A.; Saarinen, P.1998 Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Jagodzinski, yu.; Tarasenko, A.; Smouk, S.; Hänninen, H.1998 Internal Friction Study of Interstitial Behaviour in Low Activated Martensitic F82H Steel
Jagodzinski, Yu.; Tarasenko, A.; Smouk, S.; Tähtinen, S.; Hänninen, H.1998 Kilpailukykyinen hitsaustuotanto: kustannus ja laatutehokkuus
Karppi, R.; Brederholm, A.; Hänninen, H.1998 Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCil2 solution
Leinonen, H.; Hänninen, H.1998 Elastic behaviour of nitrogen alloyed austenitic stainless steels
Tervo, J.; Tasarenko, A.; Hänninen, H.1998 Kaasuturpiinit - esiselvitys
Auerkari, P.; Heikinheimo, L.; Korpiola, K.; Kauppinen, P.; Lepistö, T.; Vuoristo, P.; Hänninen, H.; Virkkunen, I.1997 Low temperature sensitisation of austenitic stainless steels
Ehrnstén, U.; Aaltonen, P.; Hänninen, H.1997 Ruostumattomat teräkset kuljetusvälineissä - Teollisuussovellukset
Lahti, K.; Vilpas, M.; Heikonen, M.; Lokka, M.; Hänninen, H.1997 Thermal fatigue of recovery boiler composite tube
Saarinen, P.; Hänninen, H.1997 The use of stainless steels in transport vehicles
Vilpas, M.; Lahti, K.; Lokka, M.; Heikonen, M.; Alenius, M.; Hänninen, H.1997 Phase Transformations and Relaxation Phenomena in Hydrogen-Charged CrNiMn and CrNi Stable Austenitic Stainless Steel
Gavriljuk, V.G.; Hänninen, H.; Smouk, S.Yu; Tarasenko, A.V.; Tereshchenko, A.S.; Ullakko, K.1996 Kompound materiaalit
Hänninen, H.1996 Kompound-putken termisen ruiskupinnoitteen karakterisointi
Ilola, R.; Hänninen, H.1996 Ruostumattoman 12%Cr RHS-putkipalkin pienaliitoksen väsymiskestävyys
Lahti, K.; Hänninen, H.; Vilpas, M.1996 Stainless for Transport - Milestone report 1.10.1993 - 30.9.1995
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Stainless for Transport
Vilpas, M.; Lahti, K.; Hänninen, H.1996 Properties of NKK-Serena Damping Steel
Aaltio, I.; Ullakko, K.; Hänninen, H.1995 Funktionaaliset materiaalit ja älykkäät rakenteet koneenrakennuksessa
Brederholm, A.; Ullakko, K.; Hänninen, H.1995 HIPed P/M Duplex Stainless Steels
Hämäläinen, Esa; Hänninen, H.; Liimatainen, J.1995 HIPped/ P/M Maraging steels
Nieminen, M.; Hänninen, H.; Liimatainen, J.1995 HIPed P/M High Nirtogen Austenitic Stainless Steels
Tervo, J.; Romu, Jyrki; Hänninen, H.; Liimatainen, J.1995 Elinjaksokustannus- ja elinkaarianalyysi ja niiden soveltaminen materiaalinvalinnassa
Lokka, M.; Hänninen, H.1994 Nitrogen Alloyed Martensitic Steels
Romu, J.; Liu, Y.; Hänninen, H.1994 The Use of Narrow-Gap Welding for Stabilized Stainless Steel Pipings - A Literature Survey
Vilpas, M.; Pelli, R.; Aaltonen, P.; Hänninen, H.1994 Cyclic Crack Growth Evaluation of a 20MnMoNi55 Piping Steel in High-Oxygen Reactor Water
Aaltonen, P.; Rintamaa, R.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 ICG-EAC Bolt-loaded WOL-Specimen Round Robin results on VTT for RPV-steel Weldments Tested in PWR Water
Aaltonen, P.; Hänninen, H.; Ehrnsten, U.; Arilahti, E.1993 Thermal Fatigue - A Literature Review
Bartsch, K.; Hänninen, H.; Nieminen, M.1993 Materiaalin valinnan asiantuntijajärjestelmät, vaativien rakenteiden materiaalitekniikka
Hänninen, H.1993 Typpiseostuksen vaikutus ruostumattomien terästen ominaisuuksiin
Nieminen, M.; Hänninen, H.1993 High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies
Romu, J.; Hänninen, H.1993 Ydinvoimalaitosten paineastiaterästen vetyhaurauden ja säteilyhaurastumisen yhteisvaikutukset
Hänninen, H.1992 Pulverimetallurgisesti valmistettujen maraging-terästen ominaisuudet
Laitinen, Eero; Nieminen, Markku; Hänninen, H.1992 Muotohitsaus, menetelmät, käyttöperusteet ja tulevaisuudennäkymät
Niini, E.; Vartiainen, S.; Vilpas, M.; Hänninen, H.1992 Ruostumattomien terästen jännityskorroosion ja korroosioväsymisen estäminen
Pohjanne, P.; Hänninen, H.1992 Austeniittisen ja duplex ruostumattomien terästen jännityskorroosio ja korroosioväsyminen kuumissa kloridiliuoksissa
Pohjanne, P.; Hänninen, H.1992 Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel Tubes in BWR-Reactor Water
Tähtinen, S.; Hänninen, H.; Nenonen, P.; Ehrnsten, U.1992 Overview of the Nuclear Power Plant Structural Integrity Research in Finland
Törrönen, K.; Aaltonen, P.; Hänninen, H.; Mäkelä, K.; Karjalainen-Roikonen, P.; Keinänen, H.; Kauppinen, P.; Rintamaa, R.; Talja, H.1992 Patents and invention disclosures
PatentMethod for Producing Defects and Tensile Residual Stresses
Elfving, K.; Hänninen, Hannu; Kemppainen, Mika; Saarinen, P.; Virkkunen, Iikka2004 TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Antin, Kim-Niklas; Talonen, Juho; Hänninen, Hannu; Singh, Preet2014 Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Kemppainen, H.; Hänninen, Hannu; Törrönen, K.; Salonen, S.1982 in ULTRAMICROSCOPY (Elsevier Science B.V.)ISSN: 0304-3991
Structural integrity of Ni-base alloy welds
Microstructures of nickel-base alloy dissimilar metal welds
Materials Science and Technology - Nuclear Materials, Advanced Course
Hydrogen Sensitivity of Different Advanced High Strength Microstructures (HYDRAMICROS)
Environment-assisted Cracking and Hot Cracking Susceptibility of Nickel-base Alloy Weld Metals
White Paper on Crack Initiation of Structural Materials in LWRs
Toughness Properties of Ferritic Stainless Steels
Properties of FeCrAl Alloys and Austenitic Stainless Steel for Boiler Environments
State-of-the-art of thermoelectric materials processing
Friction Stir Welding, Stir, Final Report
Friction Stir Welding of High Temperature Materials, Kuuma, Final Report
New Amorphous Alloys in Metal Layers
Hot Cracking and Environment-assisted Cracking Susceptibility of Dissimilar Metal Welds
Mechanical Characterisation of Austenitic Stainless Steels and Inconel Alloys under Dynamic Strain Aging Conditions
Residual Stress Measurements of Copper Canister EB-welds
Dissimilar Metal Weld Joints and their Performance in Nuclear Power Plant and Oil Refinery Conditions
Dynamic Strain Aging of Nuclear Power Plant Materials
Hitsaamon pienhiukkaset
Hitsaushuurun vähentäminen teollisuudessa
Hitsaamon pienhiukkaset - Fine Particles in Welding Workshop
Thermal Fatigue Testing of the PWR Secondary Circuit Piping
Microstructure of Friction Stir Welded Copper Joints
Hitsaushuurun pienhiukkaset ja niiden terveydelliset vaikutukset
Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking
Selvitys: Soodakattila tulevaisuudessa materiaalivaihtoehtojen valinta osaprojekti
Copper-carbon Composites
Materials Selection for High Temperature Applications
Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet
Katalyyttipinnat ja niiden valmistus
Narrow Gap Arc Welding Experiments of Thick Copper Sections
Rakenteiden keventäminen termomekaanisesti valmistettuja teräksiä käyttämällä (TERMO)
Soodakattila tulevaisuudessa - esiselvitysraportit; Japanin matkakertomus
GT-MAT: Kaasuturbiinien materiaalit: Inconel 738 LC superseoksen termisen väsymisen kestävyys ja vaurioasteen arviointi ainettarikkomattomasti
Pinnoitushitsaus eri menetelmillä
Kapearailohitsaus perinteisillä menetelmillä
Soodakattila tulevaisuudessa - esiselvitysraportit; rakennusasteen noston vaikutukset materiaalin valintaan, materiaalitutkimus
Superplasticity in stainless steels
Precipitation of secondary phases in Duplok 27 stainless steel with emphasis on copper effects
Corrosion Resistance of Welded Stainless Steels in Salt Spray Chanber Tests and Road Conditions
Effects of EDM on Surface Residual Stresses in a TMCP Steel
Termisesti väsytettyjen kaasuturbiinimateriaalien karakterisointi: tulokset väsytyskokeista, rikkovasta tarkastuksesta sekä jäännösjännitys- ja röntgendiffraktiomittauksista
Design and Implementation of Ring-Core Method for Residual Stress Measurement
Residual Stresses Induced by Cyclic Thermal Loads
Fabrication and properties of stainless steel sandwich structures
Kaasuturbiinien korkean lämpötilan vaurioitumismekanismit
Hitsatut ja hipatut paksut pinnoitteet korkean lämpötilan sovelluksissa
The effect of sulphate on crack growth rates in stainless steel and alloy 182 weld metal in BWR environment
Proceedings of the NI-seminar "Stainless Steels in Transport Industry" February 4-5. 1998
Esiselvitys soodakattilan uusista rakennemateriaaleista
Interaction of nitrogen with dislocations studied by means of amplitude-dependent internal friction
Internal Friction Study of Interstitial Behaviour in Low Activated Martensitic F82H Steel
Kilpailukykyinen hitsaustuotanto: kustannus ja laatutehokkuus
Stress corrosion cracking susceptibility of nitrogen alloyed stainless steels in 50% CaCil2 solution
Elastic behaviour of nitrogen alloyed austenitic stainless steels
Kaasuturpiinit - esiselvitys
Low temperature sensitisation of austenitic stainless steels
Ruostumattomat teräkset kuljetusvälineissä - Teollisuussovellukset
Thermal fatigue of recovery boiler composite tube
The use of stainless steels in transport vehicles
Phase Transformations and Relaxation Phenomena in Hydrogen-Charged CrNiMn and CrNi Stable Austenitic Stainless Steel
Kompound materiaalit
Kompound-putken termisen ruiskupinnoitteen karakterisointi
Ruostumattoman 12%Cr RHS-putkipalkin pienaliitoksen väsymiskestävyys
Stainless for Transport - Milestone report 1.10.1993 - 30.9.1995
Stainless for Transport
Properties of NKK-Serena Damping Steel
Funktionaaliset materiaalit ja älykkäät rakenteet koneenrakennuksessa
HIPed P/M Duplex Stainless Steels
HIPped/ P/M Maraging steels
HIPed P/M High Nirtogen Austenitic Stainless Steels
Elinjaksokustannus- ja elinkaarianalyysi ja niiden soveltaminen materiaalinvalinnassa
Nitrogen Alloyed Martensitic Steels
The Use of Narrow-Gap Welding for Stabilized Stainless Steel Pipings - A Literature Survey
Cyclic Crack Growth Evaluation of a 20MnMoNi55 Piping Steel in High-Oxygen Reactor Water
ICG-EAC Bolt-loaded WOL-Specimen Round Robin results on VTT for RPV-steel Weldments Tested in PWR Water
Thermal Fatigue - A Literature Review
Materiaalin valinnan asiantuntijajärjestelmät, vaativien rakenteiden materiaalitekniikka
Typpiseostuksen vaikutus ruostumattomien terästen ominaisuuksiin
High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies
Ydinvoimalaitosten paineastiaterästen vetyhaurauden ja säteilyhaurastumisen yhteisvaikutukset
Pulverimetallurgisesti valmistettujen maraging-terästen ominaisuudet
Muotohitsaus, menetelmät, käyttöperusteet ja tulevaisuudennäkymät
Ruostumattomien terästen jännityskorroosion ja korroosioväsymisen estäminen
Austeniittisen ja duplex ruostumattomien terästen jännityskorroosio ja korroosioväsyminen kuumissa kloridiliuoksissa
Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel Tubes in BWR-Reactor Water
Overview of the Nuclear Power Plant Structural Integrity Research in Finland
Method for Producing Defects and Tensile Residual Stresses
TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Antin, Kim-Niklas; Talonen, Juho; Hänninen, Hannu; Singh, Preet2014 Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Kemppainen, H.; Hänninen, Hannu; Törrönen, K.; Salonen, S.1982 in ULTRAMICROSCOPY (Elsevier Science B.V.)ISSN: 0304-3991
TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel
Fractography in evaluation of the mechanism of environment-sensitive cyclic crack growth of nuclear reactor pressure vessel steels
Read about executive education
Other experts
Hillary Elfenbein
Hillary Anger Elfenbein has been a business school professor at the Olin School of Washington University in St. Louis since 2008. She holds a Ph.D. in Organizational Behavior, a Master’s degree in Statistics, and undergraduate degrees in Physics and Sanskrit, all from Harvard University. Dr. Elf...
Günter Hitsch
Günter J. Hitsch is the Kilts Family Professor of Marketing at the University of Chicago Booth School of Business. He studies quantitative marketing and industrial organization. His research interests include dynamic models of firm and consumer decision-making with a specific focus on advertis...
Juan Manuel De Toro
Areas of Interest Advertising-communication Brand creation, management and appraisal Promotional strategy with the channel and the consumer Media management Marketing strategy Juan Manuel de Toro is professor in the Marketing Department. His areas of specialization include advertising, communi...
Looking for an expert?
Contact us and we'll find the best option for you.