Schools
Aalto University School of Business

Biography

Aalto University School of Business
Professor, Process Control and Automation

Peer-reviewed scientific articles

Journal article-refereed, Original research

Improvement of load-following capacity of grate boilers based on the combustion power soft-sensor

Kortela, Jukka; Jämsä-Jounela, Sirkka Liisa
2017 in Energy Procedia (Elsevier BV)
ISSN: 1876-6102

Data and Reliability Characterization Strategy for Automatic Detection of Valve Stiction in Control Loops

Pozo Garcia, Octavio; Zakharov, Alexey; Jamsa-Jounela, Sirkka Liisa
2017 in IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (Institute of Electrical and Electronics Engineers Inc.)
ISSN: 1063-6536

Data-reconciliation based fault-tolerant model predictive control for a biomass boiler

Sarkar, Palash; Kortela, Jukka; Boriouchkine, Alexandre; Zattoni, Elena; Jämsä-Jounela, Sirkka Liisa
2017 in ENERGIES (MDPI AG)
ISSN: 1996-1073

Simplification of a mechanistic model of biomass combustion for on-line computations

Boriouchkine, Alexandre; Jämsä-Jounela, Sirkka Liisa
2016 in ENERGIES (MDPI AG)
ISSN: 1996-1073

Hybrid approach to casual analysis on a complex industrial system based on transfer entropy in conjunction with process connectivity information

Landman, R.; Jämsä-Jounela, S. L.
2016 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)
ISSN: 0967-0661

Experiments and modeling of fixed-bed debarking residue pyrolysis The effect of fuel bed properties on product yields

Boriouchkine, Alexandre; Sharifi, Vida; Swithenbank, Jim; Jämsä-Jounela, Sirkka-Liisa
2015 in CHEMICAL ENGINEERING SCIENCE (PERGAMON-ELSEVIER SCIENCE LTD)
ISSN: 0009-2509

Dynamic modeling of a multiple hearth furnace for kaolin calcination

Eskelinen, Aleksi ; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa; Hearle, Jonathan
2015 in AICHE JOURNAL (Wiley)
ISSN: 0001-1541

Modeling and model predictive control of the BioPower combined heat and power (CHP) plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2015 in INTERNATIONAL JOURNAL OF ELECTRICAL POWER AND ENERGY SYSTEMS (Elsevier Limited)
ISSN: 0142-0615

A performance optimization algorithm for controller reconfiguration in fault tolerant distributed model predictive control

Zakharov, Alexey; Zattoni, Elena; Yu, Miao; Jämsä-Jounela, Sirkka-Liisa
2015 in JOURNAL OF PROCESS CONTROL (Elsevier Limited)
ISSN: 0959-1524

A study on the dynamic combustion behavior of a biomass fuel bed

Boriouchkine, Alexandre; Sharifi, Vida; Swithenbank, Jim; Jämsä-Jounela, Sirkka-Liisa
2014 in FUEL (Elsevier BV)
ISSN: 0016-2361

Model predictive control utilizing fuel and moisture soft-sensors for the BioPower 5 combined heat and power (CHP) plant Original

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2014 in APPLIED ENERGY (ELSEVIER SCI LTD)
ISSN: 0306-2619

Fault Tolerant Model Predictive Control for the BioPower 5 CHP Plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2014 in CHEMICAL ENGINEERING TRANSACTIONS (ELSEVIER SCI LTD)

Fault propagation analysis of oscillations in control loops using data-driven causality and plant connectivity

Landman, Rinat; Kortela, Jukka; Sun, Qiang; Jämsä-Jounela, Sirkka-Liisa
2014 in Computers and Chemical Engineering (Elsevier BV)
ISSN: 0098-1354

A method for detecting non-stationary oscillations in process plants

Tikkala, Vesa-Matti; Zakharov, Alexey; Jamsa-Jounela, Sirkka-Liisa
2014 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)
ISSN: 0967-0661

Robust oscillation detection index and characterization of oscillating signals for valve stiction detection

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2014 in INDUSTRIAL AND ENGINEERING CHEMISTRY RESEARCH (AMER CHEMICAL SOC)
ISSN: 0888-5885

Outline of a fault diagnosis system for a large-scale board machine

Jämsä-Jounela, Sirkka-Liisa; Tikkala, Vesa-Matti; Zakharov, Alexey; Pozo Garcia, Octavio; Laavi, Helena; Myller, Tommi; Kulomaa, Tomi; Hämäläinen, Veikko
2013 in INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (SPRINGER LONDON LTD)
ISSN: 0268-3768

Fuel moisture soft-sensor and its validation for the industrial BioPower 5 CHP plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2013 in APPLIED ENERGY (ELSEVIER SCI LTD)
ISSN: 0306-2619

Integrated FDD system for valve stiction in a paperboard machine

Pozo Garcia, Octavio; Tikkala, Vesa-Matti; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2013 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)
ISSN: 0967-0661

An autonomous valve stiction detection system based on data characterization

Zakharov, Alexey; Zattoni, Elena; Xie, Lei; Pozo Garcia, Octavio; Jämsä-Jounela, Sirkka-Liisa
2013 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)
ISSN: 0967-0661

A fault detection and diagnosis approach based on nonlinear parity equations and its application to leakages and blockages in the drying section of a board machine

Zakharov, Alexey; Tikkala, Vesa-Matti; Jämsä-Jounela, Sirkka-Liisa
2013 in JOURNAL OF PROCESS CONTROL (Elsevier Limited)
ISSN: 0959-1524

Two-phase model predictive control and its application to the Tennessee Eastman process

Zakharov, Alexey; Bosman, Stefan; Jämsä-Jounela, Sirkka-Liisa
2013 in INDUSTRIAL AND ENGINEERING CHEMISTRY RESEARCH (AMER CHEMICAL SOC)
ISSN: 0888-5885

Dynamic modeling of combustion in a BioGrate furnace: The effect of operation parameters on biomass firing

Boriouchkine, Alexandre; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2012 in CHEMICAL ENGINEERING SCIENCE (PERGAMON-ELSEVIER SCIENCE LTD)
ISSN: 0009-2509

Fuel-quality soft sensor using the dynamic superheater model for control strategy improvement of the Biopower 5 CHP plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2012 in INTERNATIONAL JOURNAL OF ELECTRICAL POWER AND ENERGY SYSTEMS (Elsevier Limited)
ISSN: 0142-0615

Optimization of grinding parameters in the production of colorant paste

Mäntynen, A.; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa; Graeffe, M.
2012 in POWDER TECHNOLOGY (Elsevier)
ISSN: 0032-5910

Monitoring of Caliper Sensor Fouling in a Board Machine Using Self-Organizing Maps

Tikkala, Vesa-Matti; Jämsä-Jounela, Sirkka-Liisa
2012 in EXPERT SYSTEMS WITH APPLICATIONS (Elsevier Limited)
ISSN: 0957-4174

Application of the Enhanced Dynamic Causal Digraph Method on a Three-Layer Board Machine

Cheng, Hui; Tikkala, Vesa-Matti; Zakharov, Alexey; Myller, Tommi; Jamsa-Jounela, Sirkka-Liisa
2011 in IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (Institute of Electrical and Electronics Engineers Inc.)
ISSN: 1063-6536

Data-Based, Fault-Tolerant Model Predictive Control of a Complex Industrial Dearomatization Process

Kettunen, Markus; Jämsä-Jounela, Sirkka-Liisa
2011 in INDUSTRIAL AND ENGINEERING CHEMISTRY RESEARCH (AMER CHEMICAL SOC)
ISSN: 0888-5885

Iterative optimization of the economic efficiency of an industrial process within the validity area of the static plant model and its application to a Pulp Mill

Zakharov, A.; Jämsä-Jounela, Sirkka-Liisa
2011 in Computers and Chemical Engineering (Elsevier BV)
ISSN: 0098-1354

Control of Industrial Copper Solvent Extraction Process

Komulainen, T.; Rantala, A.; Doyle, F.; Jämsä-Jounela, Sirkka-Liisa
2009 in JOURNAL OF PROCESS CONTROL (Elsevier Limited)

Fault Tolerant Control for a Dearomatisation Process

Sourander, M.; Vermasvuori, M.; Sauter, D.; Liikala, T.; Jämsä-Jounela, Sirkka-Liisa
2009 in JOURNAL OF PROCESS CONTROL (Elsevier Limited)
ISSN: 0959-1524

Networked control with delay measurement and estimation

Vatanski, Nikolai; Georges, Jean-Philippe; Aubrun, Christophe; Jämsä-Jounela, Sirkka-Liisa
2009 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)
ISSN: 0967-0661

Evaluation of PCA methods with improved fault isolation capabilities on a paper machine simulator

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2008 in CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (Elsevier)
ISSN: 0169-7439

Fault Diagnosis of the Paper Machine Short Circulation Process using Novel Dynamic Causal Digraph Reasoning

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2008 in JOURNAL OF PROCESS CONTROL (Elsevier Limited)

An embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process

Kettunen, Markus; Zhang, P.; Jämsä-Jounela, Sirkka-Liisa
2008 in Computers and Chemical Engineering (Elsevier BV)

Fault detection and isolation of an online analyzer for an ethylene cracking process

Kämpjärvi, P.; Sourander, M.; Komulainen, T.; Nikus, M.; Vatanski, N.; Jämsä-Jounela, Sirkka-Liisa
2008 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Future Trends in Process Automation

Jämsä-Jounela, Sirkka-Liisa
2007 in Annual Reviews on Control (Elsevier Limited)

Effect of speed and accuracy of on-line elemental analysis on flotation control performance

Remes, Antti; Saloheimo, K.; Jämsä-Jounela, Sirkka-Liisa
2007 in Minerals Engineering (Elsevier Limited)
ISSN: 0892-6875

Dynamic modelling of an industrial copper solvent extraction process

Komulainen, Tiina; Pekkala, Pertti; Rantala, Ari; Jämsä-Jounela, Sirkka-Liisa
2006 in HYDROMETALLURGY (Elsevier Science B.V.)

Operator Support System for the Pressure Filter

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Kämpe, Jerri; Koskela, Kari
2005 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

An online application of dynamic PLS to a dearomatization process

Komulainen, Tiina; Sourander, Mauri; Jämsä-Jounela, Sirkka-Liisa
2004 in Computers and Chemical Engineering (Elsevier BV)
ISSN: 0098-1354

Milestone report for area 7 industrial applications

McAvoy, Tom; Jämsä-Jounela, Sirkka-Liisa; Patton, Ron
2004 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Evaluation of control performance: methods, monitoring tool and applications in a flotation plant

Jämsä-Jounela, Sirkka-Liisa; Poikonen, Risto; Vatanski, Nikolai; Rantala, Ari
2003 in Minerals Engineering (Elsevier Limited)

A process monitoring system based on the Kohonen self-organizing maps

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Endén, Petri; Haavisto, Sasa
2003 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Control of pulp levels flotation cells

Jämsä-Jounela, Sirkka-Liisa; Dietrich, Maija; Halmevaara, Kalle; Tiili, Otso
2003 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Level control strategies for flotation cells

Kämpjärvi, Petteri; Jämsä-Jounela, Sirkka-Liisa
2003 in Minerals Engineering (Elsevier Limited)

State of the art in copper hydrometallurgic process control

Bergh, Luis; Jämsä-Jounela, Sirkka-Liisa; Hodouin, Daniel
2001 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

State of the art and challenges in mineral processing control

Hodouin, Daniel; Jämsä-Jounela, Sirkka-Liisa; Carvalho, Teresa C.; Bergh, Luis
2001 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Current status and future trends in the automation of mineral and metal processing

Jämsä-Jounela, Sirkka-Liisa
2001 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Intelligent Control System for Low Emission and Heat Losses with Maximum Lime Kiln Production

Järvensivu, Mika; Jämsä-Jounela, Sirkka-Liisa; Ahava, Olli
2001 in Solutions! for People,Process and Paper (Elsevier Limited)

Intelligent control system of an industrial lime kiln process

Järvensivu, Mika; Saari, K.; Jämsä-Jounela, Sirkka-Liisa
2001 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)

Modelling module of the intelligent control system for variable volume pressure filter

Jämsä-Jounela, Sirkka-Liisa; Oja, Marja
2000 in FILTRATION AND SEPARATION (Elsevier BV)
ISSN: 0015-1882

Field survey of the Reduced-sulfur emissions from a modern Finnish pulp mill

Järvensivu, M.; Mäenpää, T.; Jämsä-Jounela, S-L; Saari, K.
2000 in ENVIRONMENTAL PROGRESS AND SUSTAINABLE ENERGY (John Wiley and Sons Inc.)
ISSN: 1944-7442

On-line determination of the concentrator feed type at Outokumpu Hitura mine

Laine, Sampsa; Pulkkinen, K.; Jämsä-Jounela, Sirkka-Liisa
2000 in Minerals Engineering (Elsevier Limited)

Transient studies of adsorption kinetics

Kanervo, Jaana; Backman, Leif; Krause, Outi; Jämsä-Jounela, Sirkka-Liisa
1999 in STUDIES IN SURFACE SCIENCE AND CATALYSIS (Elsevier BV)

Ore Type based Expert Systems in Mineral Processing Plants

Jämsä-Jounela, S-L.; Laine, S.; Ruokonen, E.
1998 in Particle & Particle Systems Characterization (Elsevier BV)

Copper flotation profit and control-system accuracy

Tenno, R.; Jämsä-Jounela, Sirkka-Liisa
1996 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)
ISSN: 0967-0661

Simulation study of self-tuning adaptive control for rougher flotation

Jämsä-Jounela, Sirkka-Liisa
1992 in POWDER TECHNOLOGY (Elsevier)
ISSN: 0032-5910

Book section, Chapters in research books

Computer Control in Mining and Extractive Metallurgy

Baiden, Greig; Jämsä-Jounela, Sirkka-Liisa
2011
ISBN: 978-1-4398-1776-6

Automation and Robotics in Mining and Mineral Processing

Jämsä-Jounela, Sirkka-Liisa; Baiden, Greg
2009
ISBN: 978-3-540-78830-0

Operational decision making in the process industry; Multidiciplinary approach

Mätäsniemi, Teemu; Ritala, R.; Leiviskä, K.; Jämsä-Jounela, Sirkka-Liisa
2008

Conference proceedings

Perspective for equipment automation in process industries

Sun, Bei; Jämsä-Jounela, Sirkka-Liisa; Todorov, Yancho; Olivier, Laurentz; Craig, Ian
2017

Dynamic modelling of a multiple hearth furnace for kaolin calcination with a sensitivity analysis with respect to reaction rates

Eskelinen, Aleksi; Zakharov, Alexey; Hearle, Jonathan; Jämsä-Jounela, Sirkka Liisa
2016 in IFAC-PapersOnLine (VTT)
ISSN: 2405-8963

Improvement of load-following capacity of grate boilers based on the combustion power soft-sensor

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2016
ISBN: 9781509013142

A new approach for implementing Transfer Entropy using Process Topology

Landman, Rinat; Jämsä-Jounela, Sirkka-Liisa
2016 in Conference on Control and Fault-Tolerant Systems (IEEE Computer Society)
ISBN: 978-1-5090-0657-1
ISSN: 2162-1195

A study on the combustion dynamics of a biomass fuel bed in a BioGrate boiler

Boriouchkine, Alexandre; Sharifi, Vida; Swithenbank, Jim; Jämsä-Jounela, Sirkka-Liisa
2015

A Study on the Combustion Dynamics of a Biomass Fuel Bed in a BioGrate Boiler

Boriouchkine, Alexandre; Sharifi, Vida; Swithenbank, Jim; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 978-88-95608-30-3
ISSN: 2283-9216

Dynamic modelling of kaolin calcination in a multiple hearth furnace

Eskelinen, Aleksi; Zakharov, Alexey; Hearle, Jonathan; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 13 978952-5183-46-7
ISSN: 1455-6502

Fault-tolerant model predictive control (FTMPC) for the BioGrate boiler

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 978-1-4673-7929-8

Fault tolerant model predictive control for the BioPower 5 CHP plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 13 978952-5183-46-7
ISSN: 1455-6502

Fault-tolerant model predictive control (FTMPC) for the BioGrate boiler

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 978-1-4673-7928-1

Integrated fault detection system for a boardmaking process

Tikkala, Vesa-Matti; Zakharov, Alexey; Pozo Garcia, Octavio; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 13978-952-5183-46-7
ISSN: 1455-6502

Detection method for non-stationary oscillations in process plants

Tikkala, Vesa-Matti; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 13978-952-5183-46-7
ISSN: 1455-6502

A study on the fault tolerant control of a board machine

Yu, Miao; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 13 978952-5183-46-7
ISSN: 1455-6502

A performance optimization algorithm for controller reconfiguration in fault tolerant distributed model predictive control

Zakharov, Alexey; Zattoni, Elena; Yu, Miao; Jämsä-Jounela, Sirkka Liisa
2015
ISBN: 9781467381833

A performance optimization algorithm for Controller Reconfiguration in Fault Tolerant Model Predictive Control

Zakharov, Alexey; Zattoni, Elena; Yu, Miao; Jämsä-Jounela, Sirkka-Liisa
2015
ISBN: 978-1-4673-8183-3

A study on the combustion dynamics of a biomass fuel bed in a BioGrate boiler

Boriouchkine, Alexandre; Sharifi, Vida; Swithenbank, Jim; Jämsä-Jounela, Sirkka-Liisa
2014

Fault propagation analysis by combining data-driven causal analysis and plant connectivity

Landman, Rinat; Kortela, Jukka; Jämsä-Jounela, Sirkka Liisa
2014
ISBN: 9781479948468

A dynamic prognosis algorithm in distributed fault tolerant model predictive control

Zakharov, Alexey; Yu, Miao; Jamsa-Jounela, Sirkka-Liisa
2014

Biomass combustion for power generation: Dynamic modeling and full-scale industrial experiments

Boriouchkine, Alexandre; Zakharov, Alexey; Huotari, Juha; Jämsä-Jounela, Sirkka-Liisa
2013

Outline of a fault diagnosis system for a large-scale board machine

Jämsä-Jounela, Sirkka-Liisa; Tikkala, Vesa-Matti; Zakharov, Alexey; Pozo Garcia, Octavio
2013
ISBN: 978-952-5183-44-3
ISSN: 1455-6502

Model predictive control utilizing fuel bed height model and moisture soft-sensor for the BioPower plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2013

Modeling and model predictive control utilizing a fuel moisture soft-sensor and fuel flow estimation for the BioPower 5 CHP plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2013
ISBN: 978-952-5183-44-3
ISSN: 1455-6502

Integrated FDD system for valve stiction in a paperboard machine

Pozo Garcia, Octavio; Tikkala, Vesa-Matti; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2013

Adaptive Iterative Learning Control for Discrete-Time Nonlinear Systems without Knowing the Control Gain Signs

Yu, Miao; Jämsä-Jounela, Sirkka-Liisa
2013

An autonomous valve stiction detection system based on data characterization

Zakharov, Alexey; Zattoni, Elena; Xie, Lei; Pozo Garcia, Octavio; Jämsä-Jounela, Sirkka-Liisa
2013

An autonomous valve stiction detection system based on data characterization

Zakharov, Alexey; Zattoni, Elena; Xie, Lei; Pozo Garcia, Octavio; Jämsä-Jounela, Sirkka-Liisa
2013

Data characterization for automatic selection of valve stiction detection algorithms

Zakharov, Alexey; Zattoni, Elena; Xie, Lei; Pozo Garcia, Octavio; Jämsä-Jounela, Sirkka-Liisa
2013 in IEEE Conference on Decision and Control (IEEE)
ISSN: 0743-1546

Fault detection and diagnosis approach based on nonlinear parity equations and its application to the drying section of a board machine

Zakharov, Alexey; Tikkala, Vesa-Matti; Jämsä-Jounela, Sirkka-Liisa
2013

Outline of a Fault Diagnosis System for a Large-Scale Board Machine

Jämsä-Jounela, Sirkka-Liisa; Tikkala, Vesa-Matti; Zakharov, Alexey; Pozo Garcia, Octavio
2012
ISBN: 978-1-4673-4503-3

Model predictive control for BioPower combined heat and power (CHP) plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-0-444-59505-8
ISSN: 1570-7946

Fuel moisture soft-sensor and its validation for the industrial BioGrate boiler

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

Educational toolkit for teaching FDD methods

Kuuluvainen, Venla; Tikkala, Vesa-Matti; Kiiski, Esa; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

Integrated FDD system for valve stiction in a paperboard machine

Pozo Garcia, Octavio; Tikkala, Vesa-Matti; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2012

Application of Shape-based Stiction Detection Methods for the Critical Valves of a Board Machine

Pozo Garcia, Octavio; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

Fault Analysis as a Tool for Fault Detection and Diagnosis Development in Large-Scale Systems

Tikkala, Vesa-Matti; Laavi, Helena; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

Data Analysis and Monitoring of Thickness Sensor Fouling using Self-Organized Maps

Tikkala, Vesa-Matti; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

Fault detection and diagnosis system for the drying section of a board machine

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

A model-based FDD method of interacting control loops and its application to a mixing tank process

Özdenkci, Karhan; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2012
ISBN: 978-87-643-0946-1

Fault Diagnosis Methods and their Applications in the Process industry

Jämsä-Jounela, Sirkka-Liisa
2011
ISBN: 978-9989-2175-8-6

Fuel quality soft-sensor using dynamic superheater model for control strategy improvement of the Biopower 5 CHP plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2011
ISBN: 978-952-5183-43-6
ISSN: 1455-6502

Fault Analysis as a Tool for Fault Detection and Diagnosis Development in Large-Scale Systems

Laavi, Helena; Tikkala, Vesa-Matti; Myller, Tommi; Kulomaa, Tomi; Hämäläinen, Veikko; Jämsä-Jounela, Sirkka-Liisa
2011

Data Analysis and Monitoring of Thickness Sensor Fouling Using Self-Organized Maps

Tikkala, Vesa-Matti; Myller, Tommi; Kulomaa, Tomi; Hämäläinen, Veikko; Jämsä-Jounela, Sirkka-Liisa
2011

A two phase MPC and its application to a grinding process

Zakharov, Alexey; Boriouchkine, Alexandre; Jämsä-Jounela, Sirkka-Liisa
2011

Dynamic Modelling of combustion in a BioGrate furnace; a sensitivity analysis on the fuel quality and combustion air aupply

Boriouchkine, Alexandre; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2010
ISSN: 0280-5316

Fuel moisture content analysis as a basis for process monitoring of a BioGrate boiler

Boriouchkine, Alexander; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2010

Fuel quality soft-sensor for control strategy improvement of the Biopower 5 CHP plant

Kortela, Jukka; Jämsä-Jounela, Sirkka-Liisa
2010
ISBN: 978-1-4244-8154-5

Detection and Isolation of Oscillations Using the Dynamic Causal Digraph Method

Tikkala, Vesa-Matti; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2010
ISBN: 978-1-4244-8152-1

A Two Phase MPC and its Application to a Grinding Process

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa; Boriouchkine, Alexandre
2010

A Two Phase MPC and its Application to a Grinding Process

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa; Boriouchkine, Alexandre
2010
ISBN: 978-142448154-5

A two phase objective function for a constrained MPC and its application to the grinding process

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa; Boriouchkine, Alexander
2010

Application of the Enhanced Dynamic Causal Digraph Method on a Three-Layer Board Machine

Hui, Cheng; Tikkala, Vesa-Matti; Jämsä-Jounela, Sirkka-Liisa
2009
ISBN: 978-963-311-369-1

Embedded Control and Monitoring Systems in Production Machine Networks

Jämsä-Jounela, Sirkka-Liisa; Huovinen, Mikko
2009

Optimization of the Pulp Mill Economical Efficiency: Study on the Behaviour Effect of the Economically Significant Variables

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2009

Application of dynamic causal digraph method for fault diagnosis on wastewater treatment process

Cheng, Hui; Mulas, Michela; Jämsä-Jounela, Sirkka-Liisa
2008
ISBN: 978-952-5183-35-1
ISSN: 1455-6502

Novel Causal Digraph Reasoning For Fault Diagnosis with Application on the Paper Machine Short Circulation Process

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2008

An Application of the Enhanced Dynamic Causal Digraph Fault Diagnosis Method on a Three-layer Board Machine

Cheng, Hui; Tikkala, Vesa-Matti; Jämsä-Jounela, Sirkka-Liisa
2008
ISBN: 978-952-5183-35-1
ISSN: 1455-6502

Current status and future trends in process automation

Jämsä-Jounela, Sirkka-Liisa
2008

New time variant control system design for networked control systems

Vatanski, Nikolai; Ylinen, Raimo; Jämsä-Jounela, Sirkka-Liisa
2008

FTC based on data driven FDI for a dearomatisation process

Vermasvuori, Mikko; Sourander, Mauri; Liikala, Teemu; Sauter, Dominique; Jämsä-Jounela, Sirkka-Liisa
2008

Optimization of the Pulp Mill Economical Efficiency; study on the behavior effect of the economically significant variables

Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2008
ISBN: 978-952-5183-35-1
ISSN: 1455-6502

Plant-wide disturbance assessment with an application on a paper making process

Zhang, Di; Cheng, Hui; Jämsä-Jounela, Sirkka-Liisa
2008
ISBN: 978-952-5183-35-1
ISSN: 1455-6502

ENHANCED CAUSAL DIGRAPH REASONING FOR FAULT DIAGNOSIS WITH APPLICATION ON THE PAPER MACHINE SHORT CIRCULATION PROCESS

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2007
ISBN: 978-951-22-8913-4
ISSN: 1455-4046

Enhanced Causal Digraph Reasoning For Fault Diagnosis With Application On The Paper Machine Short Circulation Process

Cheng, Hui; Nikus, Mats; Jämsa-Jounela, Sirkka-Liisa
2007

A new fault diagnosis method for process components based on causal digraph and parameter estimation methods - with application on the paper making process

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2007

Enhanced Causal digraph reasoning for fault diagnosis with application on the paper machine short circulation

Hui, Cheng; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2007

Future Trends in Process Automation

Jämsä-Jounela, Sirkka-Liisa
2007

An Embedded Fault Detection, Isolation and Accommodation System in a Model Predictive Controller for an Industrial Benchmark Process

Kettunen, Markus; Jämsä-Jounela, Sirkka-Liisa
2007
ISBN: 978-951-22-8913-4
ISSN: 1455-4046

Vikasietoinen MPC säädin

Kettunen, Markus; Jämsä-Jounela, Sirkka-Liisa
2007

PCA methods with improved fault isolation capabilities applied on a paper machine simulator

Nikus, Mats; Cheng, Hui; Jämsä-Jounela, Sirkka-Liisa
2007

Offline testing of the FTC-strategy for dearomasation process of the Naantali refinary

Sourander, Mauri; Liikala, Teemu; Vermasvuori, Mikko; Jämsä-Jounela, Sirkka-Liisa
2007

Offline testing of the FTC-strategy for dearomatization process of the Naantali refinary

Sourander, Mauri; Liikala, Teemu; Vermasvuori, Mikko; Jämsä-Jounela, Sirkka-Liisa
2007
ISBN: 978-951-22-8913-4
ISSN: 1445-4046

Compensating the transmission delay in networked control systems

Vatanski, Nikolai; Georges, Jean-Philip; Aubrun, Christopher; Rondeau, Eric; Jämsä-Jounela, Sirkka-Liisa
2007
ISBN: 978-951-22-8913-4
ISSN: 1455-4046

Compensating the transmission delay in networked control systems

Vatanski, Nikolai; Georges, Jean-Philippe; Aubrun, Christophe; Rondeau, Erik; Jämsä-Jounela, Sirkka-Liisa
2007

Data-based fault detection of the online analysers in a dearomatisation process

Vermasvuori, Mikko; Vatanski, Nikolai; Liikala, Teemu; Jämsä-Jounela, Sirkka-Liisa
2007

Application of Causal Digraph Based Fault Diagnosis Method with State-space Models on a Paper Making Process Simulator

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2006

Causal model based fault diagnosis applied on a paper machine simulator

Cheng, H.; Nikus, M.; Jämsä-Jounela, S-L
2006

Application of Causal Digraph Based Fault Diagnosis Method with Discrete State-space Models on a Paper Making process Simulator

Cheng, Hui; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2006

Operator Support System for Pressure Filters

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Kämpe, Jerri; Koskela, Kari
2006

FAULT TOLERANT MPC WITH AN EMBEDDED FDI SYSTEM

Kettunen, Markus; Jämsä-Jounela, Sirkka-Liisa
2006

Modelling and control of copper solvent extraction process

Komulainen, Tiina; Rantala, Ari; Jämsä-Jounela, Sirkka-Liisa
2006

Data-based Fault Diagnosis of the Online Analysers in an Ethylene Cracking Process

Kämpjärvi, Petteri; Sourander, Mauri; Komulainen, Tiina; Vatanski, Nikolai; Nikus, Mats; Jämsä-Jounela, Sirkka-Liisa
2006

Evaluation of PCA Methods with Improved Fault Isolation Capabilities on a Paper Machine Simulator

Nikus, Mats; Cheng, Hui; Jämsä-Jounela, Sirkka-Liisa
2006

Support vector machines for detection of analyzer faults- a case study

Nikus, Mats; Vermasvuori, Mikko; Vatanski, Nikolai; Jämsä-Jounela, Sirkka-Liisa
2006
ISBN: 952-5183-28-9

Effect of Mill Rotation Speed on the Grinding Circuit Operation at OUTOKUMPU CHROME’s KEMI Concentrator Plant

Remes, Antti; Vaara, Niina; Jämsä-Jounela, Sirkka-Liisa
2006

Intelligent Grinding Concept

Remes, Antti; Karesvuori, J.; Pekkarinen, H.; Jämsä-Jounela, Sirkka-Liisa
2006

INTEGRATED APPROACH TO MONITORING AND CONTROL OF MINERAL GRINDING PROCESSES

Remes, Antti; Karesvuori, Jarkko; Pekkarinen, Heikki; Jämsä-Jounela, Sirkka-Liisa
2006

Analysis of Industrial Grinding Circuits using PCA, PLS and Neural Networks

Remes, Antti; Vaara, Niina; Jämsä-Jounela, Sirkka-Liisa
2006

Intelligent Grinding Concept

Remes, Antti; Karesvuori, J.; Pekkarinen, H.; Jämsä-Jounela, Sirkka-Liisa
2006

Control compensation based on upper bound delay in networked control systems

Vatanski, Nikolai; Georges, Jean-Philippe; Aubrun, C.; Rondeau, E.; Jämsä-Jounela, Sirkka-Liisa
2006

Use of Upper Bound Delay Estimate in Stability Analysis and Robust Control Compensation in Networked Control Systems

Vatanski, Nikolai; Georges, Jean-Philippe; Rondeau, E.; Jämsä-Jounela, Sirkka-Liisa
2006
ISBN: 0-08-044654 -X

Control Reconfiguration in Networked Control System

Vatanski, Nikolai; Georges, Jean-Philippe; Aubrun, C.; Jämsä-Jounela, Sirkka-Liisa
2006
ISBN: 978-0-08-044485-7

Robust Control Compensation Based on Upper Bound Delay in Networked Control Systems

Vatanski, Nikolai; Georges, Jean-Philippe; Jämsä-Jounela, Sirkka-Liisa; Rondeau, E.
2006

Dynamic Modelling of an industrial copper solvent extraction process

Komulainen, Tiina; Rantala, Ari; Jämsä-Jounela, Sirkka-Liisa
2005

INTELLIGENT GRINDING CONCEPT

Remes, A.; Saloheimo, K.; Pekkarinen, H.; Jämsä-Jounela, Sirkka-Liisa
2005

Development issues on the life cycle management of mineral grinding processes and equipment

Remes, Antti; Suontaka, Ville; Saloheimo, Kari; Jämsä-Jounela, Sirkka-Liisa
2005

Economical effects of on-line elemental analysis performance on flotation control

Remes, Antti; Kongas, Matti; Saloheimo, Kari; Jämsä-Jounela, Sirkka-Liisa
2005

Control Loop Performance Measures in the Evaluation of Process economics

Vatanski, Nikolai; Jämsä-Jounela, Sirkka-Liisa; Rantala, Ari; Harju, Timo
2005

DATA BASED FAULT DETECTION OF THE ONLINE ANALYSERS IN A DEAROMATISATION PROCESS

Vermasvuori, Mikko; Vatanski, Nikolai; Jämsä-Jounela, Sirkka-Liisa
2005

Current status and future trends in automation in mineral processing

Jämsä-Jounela, Sirkka-Liisa
2004

Kuparin liekkisulatuksen vikadiagnostiikkajäjestelmä

Jämsä-Jounela, Sirkka-Liisa
2004

Operation Cycle Optimization of the Larox Pressure Filter

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Kämpe, Jerri; Koskela, Kari
2004

Integrating Process Indicators with Monitoring Method Hybrids

Jämsä-Jounela, Sirkka-Liisa; Komulainen, Tiina
2004

Particle Size Analuzer-a case project of an extended product in mineral processing

Remes, Antti; Kongas, Matti; Saloheimo, Kari; Jämsä-Jounela, Sirkka-Liisa
2004

A Process Monitoring System for Copper Solvent Extraction

Suontaka, Ville; Rantala, Ari; Jämsä-Jounela, Sirkka-Liisa
2004

The Economical Aspects of Control Loop Performance Measures in the Remote Maintenance Center Concept

Vatanski, Nikolai; Harju, Timo; Rantala, Ari; Jämsä-Jounela, Sirkka-Liisa
2004

New directions in process control education

Jämsä-Jounela, Sirkka-Liisa
2003

Evaluation of Control Performance in Remote mainetnance Centers

Jämsä-Jounela, Sirkka-Liisa; Poikonen, Risto; Vatanski, Nikolai; Rantala, Ari
2003

Operator Support System For the Larox Pressure Filter

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Kämpe, Jerri; Kesti, Anna-Riikka; Koskela, Kari
2003

Intelligent Support System for a Pressure Filter

Jämsä-Jounela, Sirkka-Liisa; Kämpe, Jerri; Vermasvuori, Mikko; Koskela, Kari
2003

Experiences with industrial applications of soft computing and hybrid AI approaches to process monitoring

Jämsä-Jounela, Sirkka-Liisa
2003

Future trends i n process automation

Jämsä-Jounela, Sirkka-Liisa
2003

Säätöjen suorituskykyindeksien monitorointiohjelman suunnittelu ja toteutus

Jämsä-Jounela, Sirkka-Liisa; Poikonen, Risto; Vatanski, Nikolai; Rantala, Ari
2003

Evaluation of control performance: Methods, Monitoring Tool and Applications in a zinc plant

Jämsä-Jounela, Sirkka-Liisa; Poikonen, Risto; Vatanski, Nikolai; Rantala, Ari
2003

Liuottimien aromaattien poistoprosessin online-monitorointi

Komulainen, Tiina; Sourander, Mauri; Jämsä-Jounela, Sirkka-Liisa
2003

A Monitoring system for the Copper Solvent Extraction-Electrowinning Process

Suontaka, Ville; Saloheimo, Kari; Marttila, Tom; Jämsä-Jounela, Sirkka-Liisa
2003

Monítoring of an industrial dearomatisation process

Bergman, Samuli; Sourander, Mauri; Jämsä-Jounela, Sirkka-Liisa
2002

A decoupling grinding circuit control system

Hauksdóttir, Anna Soffia; Ierapetritou, Marianthi; Jämsä-Jounela, Sirkka-Liisa; Zuehlke, Ursula
2002

Evaluation of level control performance

Jämsä-Jounela, Sirkka-Liisa; Poikonen, Risto; Halmevaara, Kalle
2002

Evaluation of control performance: methods and applications

Jämsä-Jounela, Sirkka-Liisa; Poikonen, Risto; Georgiev, Zdravko; Zuehlke, Ulla; Halmevaara, Kalle
2002

Effects of automation and information technologies on process control education

Jämsä-Jounela, Sirkka-Liisa; Kämpe, Jerri
2002

A toolbox for on-line process monitoring with some industrial applications

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Haavisto, Sasa; Endén, Petri
2002

An intelligent control system for a Pressure Filter

Jämsä-Jounela, Sirkka-Liisa; Kesti, Anna; Vermasvuori, Mikko; Ryynänen, Timo; Endén, Petri; Kämpe, Jerri
2002

Level control strategies for flotation cells

Kämpjärvi, Petteri; Jämsä-Jounela, Sirkka-Liisa
2002

IFAC 2002 Milestone Report on Industrial applications

Mc Avoy, Thomas; Jämsä-Jounela, Sirkka-Liisa; Patton, Ron; Perrier, Michael; Weber, Harald; Georgakis, Christos
2002

The use of Kohonen self-organizing map in process monitoring

Vermasvuori, Mikko; Endén, Petri; Haavisto, Sasa; Jämsä-Jounela, Sirkka-Liisa
2002

Prosessien monitorointimenetelmät kemian teollisuudessa

Jämsä-Jounela, Sirkka-Liisa; Bergman, Samuli; Melin, Kristian
2001

Control of pulp levels in flotation cells

Jämsä-Jounela, Sirkka-Liisa; Dietrich, Maija; Halmevaara, Kalle; Tiili, Otso
2001

Evaluation of future automation trends in control and fault diagnostics of a flotation plant

Jämsä-Jounela, Sirkka-Liisa; Laurila, Heikki; Karesvuori, Jarkko; Timperi, Juha
2001

Fault diagnosis system for the Outokumpu flash smelting process

Jämsä-Jounela, Sirkka-Liisa; Kojo, Ilkka; Vapaavuori, E.; Salmi, T.; Grönbärj, M.; Vermasvuori, Mikko
2001

Outokummun liekkisulatusprosessin vikadiagnostiikkajärjestelmä

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Haavisto, Sasa; Endén, Petri; Harri, Ilkka; Anttila, Kai
2001

Remote support system for a pressure filter

Jämsä-Jounela, Sirkka-Liisa; Kämpe, Jerri; Ryynänen, Timo
2001

Fault diagnosis system for the Outokumpu flash smelting process

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Haavisto, Sasa; Endén, Petri
2001

Vaahdotuskennojen pinnansäätö

Jämsä-Jounela, Sirkka-Liisa; Dietrich, Maija; Halmevaara, Kalle; Kämpjärvi, Petteri; Laiho, Emmi; Tiili, Otso
2001

Industrial applications of the intelligent fault diagnosis system

Jämsä-Jounela, Sirkka-Liisa; Kämpe, Jerri; Haavisto, Sasa; Vermasvuori, Mikko
2001

Current status and future trends in the automation of mineral and metal processing

Jämsä-Jounela, Sirkka-Liisa
2001

Hierarchically structured intelligent system for stabilizing and optimizing industrial processes

Järvensivu, Mika; Jämsä-Jounela, Sirkka-Liisa
2001

State of art in copper hydrometallurgic processes control

Bergh, L.; Jämsä-Jounela, Sirkka-Liisa; Hodouin, D.
2000

State of the art and challenges in mineral processing control

Hodouin, D.; Jämsä-Jounela, Sirkka-Liisa; Caravalho, M.T.; Bergh, L.
2000

Current status and future trends in the automation of mineral and metal processing

Jämsä-Jounela, Sirkka-Liisa
2000

Flotation process neural data analysis and on-line monitoring

Jämsä-Jounela, Sirkka-Liisa; Karesvuori, J.; Laurila, H.
2000

Fault diagnosis and remote support system for the variable volume pressure filter

Jämsä-Jounela, Sirkka-Liisa; Kuitunen, T.; Quiroz, C.; Kämpe, Jerri
2000

Intelligent process monitoring system

Jämsä-Jounela, Sirkka-Liisa; Quiroz, C.
2000

Fault diagnosis system for the variable volume pressure filter

Jämsä-Jounela, Sirkka-Liisa; Kuitunen, T.; Quiroz, C.; Kämpe, Jerri
2000

Fault diagnosis system for the Outokumpu flash smelting process

Jämsä-Jounela, Sirkka-Liisa; Vapaavuori, E.; Salmi, T.; Grönbärj, M.; Vermasvuori, M.
2000

Using principal componenet analysis and self-organizing map to estimate the physical quality of cathode copper

Rantala, A.; Virtanen, H.; Saloheimo, K.; Jämsä-Jounela, S-L
2000

A unified approach to process simulation

Cziprian, Z.; Grau, R.; Jämsä-Jounela, S-L.
1999

Simulation of chemical and hydrometallurgical processes

Cziprian, Z.; Grau, R.; Jämsä-Jounela, S-L.
1999

Feed type based expert systems in mineral processing plants

Jämsä-Jounela, Sirkka-Liisa; Laine, S.; Laurila, H.
1999

Feed type based expert systems in mineral processing plants

Jämsä-Jounela, Sirkka-Liisa; Laine, S.; Laurila, H.
1999

Modern fault diagnosis system for the variable volume pressure filter

Jämsä-Jounela, S-L; Paavola, E.; Kuitunen, T.; Kämpe, Jerri
1999

Fault diagnosis system for variable volume pressure filter

Jämsä-Jounela, S-L.; Toth, D.; Kuitunen, T.; Kämpe, Jerri
1999

Fault diagnosis system for variable volume pressure filter

Jämsä-Jounela, S-L.; Kuitunen, T.; Kämpe, Jerri
1999

Advanced lime kiln control

Järvensivu, M.; Juuso, E.; Sievola, H.; Leiviskä, K.; Jämsä-Jounela, S-L.
1999

Intelligent control system for the lime kiln

Järvensivu, Mika; Jämsä-Jounela, Sirkka-Liisa; Saari, K.
1999

Transient studies of adsorption kinetics

Kanervo, Jaana; Backman, B.; Krause, O.; Jämsä-Jounela, Sirkka-Liisa
1999

Fault diagnosis system for the Outokumpu flash smelting process

Vapaavuori, Eija; Jämsä-Jounela, Sirkka-Liisa
1999

Fault diagnosis system for the Outokumpu flash smelting process

Vapaavuori, Eija; Jämsä-Jounela, Sirkka-Liisa; Yianatos, J.
1999

Performance monitoring of the Outokumpu flash smelting process through PCA

Vapaavuori, Eija; Jämsä-Jounela, Sirkka-Liisa
1999

Modelling and simulation of heap leaching processes

Cziprian, Z.; Jämsä-Jounela, S-L.; Munzo, P.
1998

Expert systems in solid-liquid separation

Jämsä-Jounela, Sirkka-Liisa
1998

Heap leaching simulation

Jämsä-Jounela, Sirkka-Liisa; Cziprian, Z.
1998

Modelling module of the intelligent control system for the variable volume pressure filter

Jämsä-Jounela, S-L.; Toth, S.; Oja, M.; Junkkarinen, K.
1998

Transient kinetic modeling of adsorption

Kanervo, J.; Backman, L.; Jämsä-Jounela, S-L.; Krause, O.
1998

Automaattisen painesuodattimen suodatussyklin optimointi

Junkkarinen, K.; Jämsä-Jounela, S-L.; Oja, M.; Mäkelä, J.
1997

Scale-up Verification of a Variable Volume Pressure Filter

Junkkarinen, K.; Oja, M.; Jämsä-Jounela, Sirkka-Liisa
1997

Ore type based expert systems in mineral processing plants

Jämsä-Jounela, Sirkka-Liisa; Laine, S.; Ruokonen, E.
1997

Ore-type based expert system for the concentrators

Jämsä-Jounela, S-L.; Laine, S.; Ruokonen, E.
1997

Novel process study software for ore dresing

Jämsä-Jounela, Sirkka-Liisa
1997

Experiences of ore type based expert system at the Hitura and Kemi Concentrators

Jämsä-Jounela, S-L.; Laine, S.; Ruokonen, E.
1997

Expert systems for the variable pressure filter

Jämsä-Jounela, S-L.; Oja, M.; Mäkelä, J.; Junkkarinen, K.
1997

Modeling module for variable volume pressure filter

Oja, M.; Jämsä-Jounela, S.-L.; Junkkarinen, K.
1997

Expert system for variable volume pressure filter

Oja, M.; Jämsä-Jounela, S-L.; Mäkelä, J.; Junkkarinen, K.
1997

Recent developments in the simulation of mineral processing operations

Jämsä-Jounela, S-L.; Lättilä, T.; Teijonsalo, M.; Kummarapurugu, P.
1996

Latest experience and benefits utilizing Outokumpu Mintec automation systems at mineral processing plants

Jämsä-Jounela, Sirkka-Liisa; Karhu, L.
1996

Recent developments in designing ore type based expert system at the Hitura and Kemi concentrators

Jämsä-Jounela, S-L.; Laine, S.; Ruokonen, E.
1996

Utilization of artificial intelligence in a process study software for ore dressing processes.

Jämsä-Jounela, S.-L.; Kummarapurugu, P.; Teijonsalo, M.
1996

Artificial intelligence applications in process industry

Jämsä-Jounela, Sirkka-Liisa
1996

Computer-aided process study of mineral treatment processes

Jämsä-Jounela, S-L.; Lättilä, T.
1995

Latest experiences and benefits utilizing Outokumpu Mintec automation systems at mineral processing plants

Jämsä-Jounela, S-L.; Karhu, L.
1995

A methodology for computer-aided process study at mineral processing plants.

Jämsä-Jounela, Sirkka-Liisa
1995

Design of the integrated control systems for mineral processing

Jämsä-Jounela, Sirkka-Liisa
1995

Design of the integrated control systems for mineral processing plants

Jämsä-Jounela, Sirkka-Liisa
1995

An intelligent methodology for computer aided process study at mineral processing plants

Lättilä, Timo; Jämsä-Jounela, Sirkka-Liisa
1995

Recent Advances in the Simulation of Mineral Processing Circuits

Lättilä, Timo; Teijonsalo, M.; Jämsä-Jounela, Sirkka-Liisa
1995

A Methodology to Design Integrated Contorl Systems for Mineral Processing Plants.

Jämsä-Jounela, Sirkka-Liisa
1994

Design of the Integrated Control Systems for Mineral Processing Plants

Jämsä-Jounela, Sirkka-Liisa
1994

Integrated Solutions by Outokumpu Mintec to Improve Process Control in Mineral Processing

Karhu, L.; Jämsä-Jounela, S-L
1994

Use of cluster analysis in process control

Ylinen, R.; Jämsä-Jounela, S.-L.; Miettunen, J.
1994

Integrated Solutions by Outokumpu to Improve Production Economy in Mineral Industry

Niitti, T.; Jämsä-Jounela, Sirkka-Liisa
1993

Integrated Gridings and Flotation Control System at the Hitura Concentrator

Pulkkinen, K.; Järvensivu, M.; Jämsä-Jounela, Sirkka-Liisa
1993

Integrated expert control system for grinding and flotation

Pulkkinen, K.; Ylinen, R.; Jämsä-Jounela, S.-L.; Järvensivu, M.
1993

Esitelmä

Niemi, A.; Jämsä-Jounela, Sirkka-Liisa
1992

Cluster based modelling and control of complex processes

Ylinen, R.; Jämsä-Jounela, Sirkka-Liisa
1992

Simulation study of expert control system for flotation

Jämsä-Jounela, Sirkka-Liisa; Herbst, J. A.
1988

DESIGN AND EXPERIMENTAL EVALUATION OF A MULTIVARIABLE GRINDING CIRCUIT CONTROL SYSTEM.

Jämsä-Jounela, Sirkka-Liisa; Melama, H.; Penttinen, J.
1984
ISBN: 0080305695

EXPERIENCES IN MULTIVARIABLE CONTROL OF SULPHIDE ORE GRINDING IN VUONOS CONCENTRATOR.

Niemi, A.; Heinonen, P.; Jämsä-Jounela, Sirkka-Liisa; Melama, H.; Iivarinen, T.; Paakkinen, U.
1983

Non-refereed scientific articles

Book section

Dynamic modeling and control strategy development of a BioGrate boiler

Kortela, Jukka; Boriouchkine, Alexandre; Jämsä-Jounela, Sirkka-Liisa
2011

Unrefereed conference proceedings

Dynamic modelling of a BioGrate boiler as a basis for Fault Detection and Diagnosis

Boriouchkine, Alexandre; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2011

An application of Shape-based stiction detection in critical valves of a board machine

Pozo Garcia, Octavio; Myller, Tommi; Kulomaa, Tomi; Hämäläinen, Veikko; Jämsä-Jounela, Sirkka-Liisa
2011

A model-based FDD of interacting control loops and its applications

Özdenkçi, Karhan; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2011

Detection and Isolation of Oscillations Using the Dynamic Causal Digraph Method

Tikkala, Vesa-Matti; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2010

Scientific books (monographs)

Book

Expert systems in mineral and metal processing

Jämsä-Jounela, Sirkka-Liisa; Niemi, A.J.
1992

Book (editor)

Proceedings of the14th Nordic Process Control Workshop

Jämsä-Jounela, Sirkka-Liisa
2007

Future Trends in Automation in Mineral and Metal Processing, IFAC Workshop, Finland 22-24 August 2000

Jämsä-Jounela, Sirkka-Liisa; Vapaavuori, E.
2000

Publications intended for professional communities

Article in professional journal

50th Anniversary of IFAC; Present and Future of Automatic Control

Jämsä-Jounela, Sirkka-Liisa
2006 in atp International (Finnish Society of Automation)

Plan for the future activities of the Technical board

Jämsä-Jounela, Sirkka-Liisa
2006 in IFAC Newsletter (Finnish Society of Automation)

Plan for the Future Activities of the Technical Board

Jämsä-Jounela, Sirkka-Liisa
2006 in atp-Automation Technology in Practice (Finnish Society of Automation)

IFAC ja Suomen Automaatioseura

Jämsä-Jounela, Sirkka-Liisa
2006 in Automaatioväylä (Finnish Society of Automation)
ISSN: 0784-6428

New Technologies for Automation of the Metallurgical Industry

Xu, Le Jiang; Wang, Wei; Jämsä-Jounela, Sirkka-Liisa; Won, San Chul
2004 in IFAC Newsletter (Finnish Society of Automation)

Uusia tuulia prosessiautomaation opetuksessa

Jämsä-Jounela, Sirkka-Liisa; Söderholm, Johanna; Sihvola, Aino
2003 in Tisle (Finnish Society of Automation)

New Master's Programme in Process Control

Söderholm, Johanna; Jämsä-Jounela, Sirkka-Liisa
2003 in Polysteekki (Finnish Society of Automation)

Mitä kansainvälisyys merkitsee opiskelijalle prosessien ohjauksen ja automaation laboratoriossa

Jämsä-Jounela, S-L.
1999 in Annaalit (Finnish Society of Automation)

Prosessiautomaation kehitysnäkymät

Jämsä-Jounela, Sirkka-Liisa
1998 in Prosessitekniikka (Prosessiteknillisen kerhon vuosijulkaisu) (Finnish Society of Automation)

Oppivat älykkäät prosessinohjausjärjestelmät

Jämsä-Jounela, Sirkka-Liisa
1997 in Polysteekki (Finnish Society of Automation)
ISSN: 1455-9595

Malmin rikastusprosessien ja hydrometallurgisten prosessien simulointi

Jämsä-Jounela, Sirkka-Liisa
1997 in Polysteekki (Finnish Society of Automation)
ISSN: 1455-9595

Prosessitietämys osana oppivia ja älykkäitä ohjausjärjestelmiä

Jämsä-Jounela, Sirkka-Liisa
1997 in Annaalit (Finnish Society of Automation)

Automaatio kemianteollisuudessa

Jämsä-Jounela, Sirkka-Liisa
1995 in Automaatioväylä (Finnish Society of Automation)
ISSN: 0784-6428

Tekniikan hallinnasta muidenkin osaamisalueiden hallitsemiseen (pääkirjoitus)

Jämsä-Jounela, Sirkka-Liisa
1994 in Automaatioväylä (Finnish Society of Automation)
ISSN: 0784-6428

Article in professional conference proceedings

A methodology for fault propagation analysis based on nearest neighbors method combined with the information on process connectivity

Landman, Rinat; Jämsä-Jounela, Sirkka-Liisa
2017 in Automaatiopäivät22 Proceedings (Suomen Automaatioseura)

Optimization scenarios for Waste-to-Energy systems

Mikkola, Susanna; Harjunkoski, Iiro; Jämsä-Jounela, Sirkka-Liisa
2017 in Automaatiopäivät22 Proceedings (Suomen Automaatioseura)

Control Strategy for Supercritical Generator with Magnetic Bearings in Small Gas Turbine Application

Smirnov, Alexander; Sillanpää, Teemu; Hartikainen, Toni; Pyrhonen, Olli; Jämsä-Jounela, Sirkka-Liisa
2017 in Automaatiopäivät22 Proceedings (Suomen Automaatioseura)

A receding horizon gradient optimization approach for multiple reactor systems

Sun, Bei; Yang, Chunhua; Jämsä-Jounela, Sirkka-Liisa
2017 in Automaatiopäivät22 Proceedings (Finnish Society of Automation)

Dynamic modeling of combustion in a BioGrate furnace: a sensitivity analysis on the fuel quality and combustion air supply

Boriouchkine, Alexandre; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2011

Published development or research report

Activity Report 2003-2006

Jämsä-Jounela, Sirkka-Liisa
2007

Simulation of Fault Scenarios using a Paper Machine Simulator

Mats, Nikus; Cheng, Hui; Jämsä-Jounela, Sirkka-Liisa
2007

A dynamic model of the paper machine short circulation process

Nikus, Mats; Cheng, Hui; Jämsä-Jounela, Sirkka-Liisa
2007

Design,development and testing of an online process monitoring system

Tuononen, Lari; Jämsä-Jounela, Sirkka-Liisa
2007

Oper+: A new operator support system for complex industrial processes

Hui, Cheng; Jämsä-Jounela, Sirkka-Liisa; Nikus, Mats
2006

Fault Tolerant MPC with an Embedded FDI System

Kettunen, Markus; Jämsä-Jounela, Sirkka-liisa
2006

Data-Based Fault Detection of the Online Analysers in a Dearomatisation Process

Vermasvuori, Mikko; Vatanski, Nikolai; Jämsä-Jounela, Sirkka-Liisa
2006

Oper+; Konsepti operaattoreiden tukijärjestelmän suunnittelmiseksi

Jämsä-Jounela, Sirkka-Liisa; Kämpe, Jerri; Vermasvuori, Mikko
2005

Development trends of Operator Support Systems

Jämsä-Jounela, Sirkka-Liisa
2005

Kompleksisten teollisuusprosessien monitorointi ja hallinta

Jämsä-Jounela, Sirkka-Liisa
2005

Dynamic behaviour study of an industrial copper solvent extraction process

Komulainen, Tiina; Jämsä-Jounela, Sirkka-Liisa
2004

Influence of on-stream elemental analysis speed and accuracy to flotation process control

Remes, Antti; Kongas, Matti; Saloheimo, Kari; Jämsä-Jounela, Sirkka-Liisa
2004

Advanced operator support system for copper solvent extraction process

Suontaka, Ville; Jämsä-Jounela, Sirkka-Liisa
2004

Control loop performance indices in control economics evaluation

Vatanski, Nikolai; Jämsä-Jounela, Sirkka-Liisa
2004

Triennial Activity Report 2000 - 2002

Jämsä-Jounela, Sirkka-Liisa; Viherlaakso, Marja-Leena; Kämpe, Jerri; Jokinen, Tiina
2002

Älykkäät mittalaitteet ja kenttäväylät prosessiautomaation opetus- ja tutkimuskäytössä

Jämsä-Jounela, Sirkka-Liisa; Timperi, Juha; Kämpe, Jerri; Poikonen, Risto
2001

Painesuodattimen etävikadiagnostiikkajärjestelmä

Jämsä-Jounela, Sirkka-Liisa; Ryynänen, Timo; Kämpe, Jerri
2001

Modern fault diagnosis system for the variable volume pressure filter

Jämsä-Jounela, S-L.; Paavola, E.; Kuitunen, T.; Kämpe, Jerri
1999

Triennial Activity Report 1997-1999

Jämsä-Jounela, S-L.; Viherlaakso, M-L.; Vapaavuori, E.; Kämpe, Jerri
1999

Automation and information systems for a chemical research reactor

Quiroz, C.; Kanninen, V.; Jämsä-Jounela, S.-L.
1999

Automation and information system for a chemical research reactor

Quiroz, C.; Kanninen, V.; Jämsä-Jounela, S-L.
1999

Activity Report 1992-1994

Jämsä-Jounela, Sirkka-Liisa
1995

On-line determination of the ore type using neural networks and cluster analysis

Laine, S.; Jämsä-Jounela, S-L
1994

Audiovisual material, ICT software

Audiovisual materials

Automaatio Nesteen Naantalin öljyjalostamolla

Jämsä-Jounela, Sirkka-Liisa; Kanninen, V.; Kämpe, Jerri
2000

ICT programs or applications

online-voting system

Kiiski, Esa; Kämpe, Jerri; Jämsä-Jounela, Sirkka-Liisa
2007

Simulation platform for networked control system

Vatanski, Nikolai; Georges, Jean-Philippe; Jämsä-Jounela, Sirkka-Liisa
2007

Conference events handling system

Kiiski, Esa; Cheng, Hui; Tuononen, Lari; Kämpe, Jerri; Jämsä-Jounela, Sirkka-Liisa
2005

oper+

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Rönkönharju, Tommi
2004

Filter support2002 (versio 2)

Jämsä-Jounela, Sirkka-Liisa; Kämpe, Jerri; Vermasvuori, Mikko
2003

FilterSupport2002

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, Mikko; Kesti, Anna Riikka
2002

Vikadiag2001

Jämsä-Jounela, Sirkka-Liisa; Haavisto, Sasa; Vermasvuori, Mikko; Endén, Petri
2002

VIKADIAG2001

Jämsä-Jounela, Sirkka-Liisa; Vermasvuori, M.; Haavisto, S.; Enden, P.
2000

Knowpap-paperitekniikan ja tehtaan automaation oppimisjärjestelmä

Jämsä-Jounela, Sirkka-Liisa; Mäenpää, T.
2000

Simplified mechanistic model of the Multiple Hearth Furnace for control development

Gomez Fuentes, Jose; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
2016

Read about executive education

Other experts

Biography Dr. Mark Milstein is clinical professor of management and director of the Center for Sustainable Global Enterprise at the Samuel Curtis Johnson Graduate School of Management at Cornell University. He conducts applied research in and oversees the center''s work on market and enterprise c...
Specialization domain(s): Creativity, Sports Marketing, Consumer Behaviour, Cross-Cultural Consumer Behaviour and International Marketing Biography: Bill REEVES completed his doctorate in Advertising and Public Relations at University of Texas, Austin, USA where he also received both his M.A...