Heikki Remes

Assistant Professor at Aalto University School of Business

Schools

  • Aalto University School of Business

Links

Aalto University School of Business

Peer-reviewed scientific articles

Journal article-refereed, Original research

Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel

Malitckii, E.; Remes, H.; Lehto, P.; Yagodzinskyy, Y.; Bossuyt, S.; Hänninen, H.
2018 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)
ISSN: 1359-6454

A benchmark study of uncertainness in welding simulation

Caprace, Jean David; Fu, Guangming; Carrara, Joice F.; Remes, Heikki; Shin, Sang Beom
2017 in MARINE STRUCTURES (Elsevier BV)
ISSN: 0951-8339

Influence of crack tip plasticity on the slope of fatigue curves for laser stake-welded T-joints loaded under tension and bending

Gallo, Pasquale; Remes, Heikki; Romanoff, Jani
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Fatigue strength of laser-welded foam-filled steel sandwich beams

Karttunen, Anssi; Kanerva, Mikko; Frank, Darko; Romanoff, Jani; Remes, Heikki; Jelovica, Jasmin; Bossuyt, Sven; Sarlin, Essi
2017 in MATERIALS AND DESIGN (Elsevier BV)
ISSN: 0264-1275

Free flexural vibration of symmetric beams with inertia induced cross section deformations

Laakso, A.; Romanoff, J.; Remes, H.
2017 in THIN-WALLED STRUCTURES (Elsevier Limited)
ISSN: 0263-8231

Statistical size effect on multiaxial fatigue strength of notched steel components

Leitner, Martin; Vormwald, Michael; Remes, Heikki
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

Leitner, Martin; Garb, Christian; Remes, Heikki; Stoschka, Michael
2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)
ISSN: 0921-5093

Fatigue strength of thin laser-hybrid welded full-scale deck structure

Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki; Itävuo, Antti; Niemelä, Ari
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Hydrogen effects on mechanical properties of 18%Cr ferritic stainless steel

Malitckii, E.; Yagodzinskyy, Y.; Lehto, P.; Remes, H.; Romu, J.; Hänninen, H.
2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)
ISSN: 0921-5093

Allowable stresses in high-frequency mechanical impact (HFMI)-treated joints subjected to variable amplitude loading

Mikkola, Eeva; Remes, Heikki
2017 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)
ISSN: 0043-2288

A finite element study on residual stress stability and fatigue damage in high-frequency mechanical impact (HFMI)-treated welded joint

Mikkola, Eeva; Remes, Heikki; Marquis, Gary
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Factors affecting the fatigue strength of thin-plates in large structures

Remes, Heikki; Romanoff, Jani; Lillemäe, Ingrit; Frank, Darko; Liinalampi, Sami; Lehto, Pauli; Varsta, Petri
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

The effect of the extension of the instrumentation on the measured ice-induced load on a ship hull

Suominen, Mikko; Kujala, Pentti; Romanoff, Jani; Remes, Heikki
2017 in OCEAN ENGINEERING (Elsevier BV)
ISSN: 0029-8018

Influence of load length on short-term ice load statistics in full-scale

Suominen, Mikko; Kujala, Pentti; Romanoff, Jani; Remes, Heikki
2017 in MARINE STRUCTURES (Elsevier BV)
ISSN: 0951-8339

Interaction effect of adjacent small defects on the fatigue limit of a medium carbon steel

Åman, M.; Okazaki, S.; Matsunaga, H.; Marquis, G. B.; Remes, H.
2017 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)
ISSN: 8756-758X

Fatigue strength assessment of laser stake-welded T-joints subjected to reversed bending

Frank, D.; Dissel, P.; Remes, H.; Romanoff, J.; Klostermann, O.
2016 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)
ISSN: 8756-758X

Non-linear effective properties for web-core steel sandwich panels in tension

Körgesaar, Mihkel; Reinaldo, Goncalves; Romanoff, Jani; Remes, Heikki
2016 in INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (Elsevier Limited)
ISSN: 0020-7403

Characterisation of local grain size variation of welded structural steel

Lehto, Pauli; Romanoff, Jani; Remes, Heikki; Sarikka, Teemu
2016 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)
ISSN: 0043-2288

Fatigue strength analysis of laser-hybrid welds in thin plate considering weld geometry in microscale

Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Romanoff, Jani; Porter, David
2016 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints

Lillemäe, I.; Remes, H.; Liinalampi, S.; Itävuo, Antti
2016 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)
ISSN: 0043-2288

Material characterization of high-frequency mechanical impact (HFMI)-treated high-strength steel

Mikkola, Eeva; Marquis, Gary; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu
2016 in MATERIALS AND DESIGN (Elsevier BV)
ISSN: 0264-1275

Influence of nonsymmetric steel sandwich panel joints on response and fatigue strength of passenger ship deck structures

Romanoff, Jani; Ehlers, Sören; Remes, Heikki
2016 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)
ISSN: 2158-2866

Block erection in the event of delays in shipbuilding A scenario-based approach

Tokola, Henri Alfred; Niemi, Esko; Remes, Heikki
2016 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)
ISSN: 2158-2866

Fatigue strength of laser-welded thin-plate ship structures based on nominal and structural hot-spot stress approach

Fricke, W.; Remes, H; Feltz, O.; Lillemäe, I.; Tchuindjang, D.; Reinert, T.; Nevierov, A.; Sichermann, W.; Brinkmann, M.; Kontkanen, T.; Bohlmann, B.; Molter, L.
2015 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)
ISSN: 1744-5302

Equivalent mechanical properties for cylindrical cell honeycomb core structure

Cernescu, Anghel; Romanoff, Jani; Remes, Heikki; Faur, Nicolae; Jelovica, Jasmin
2014 in COMPOSITE STRUCTURES (Elsevier BV)
ISSN: 0263-8223

Influence of general corrosion on buckling strength of laser-welded web-core sandwich plates

Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki
2014 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)
ISSN: 0143-974X

Size dependent response of large shell elements under in-plane tensile loading

Körgesaar, Mihkel; Remes, Heikki; Romanoff, Jani
2014 in INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (PERGAMON-ELSEVIER SCIENCE LTD)
ISSN: 0020-7683

Influence of grain size distribution on the Hall-Petch relationship of welded structural steel

Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani
2014 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)
ISSN: 0921-5093

Influence of initial distortion of 3 mm thin superstructure decks on hull girder response for fatigue assessment

Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2014 in MARINE STRUCTURES (Elsevier BV)
ISSN: 0951-8339

Influencing factors on fatigue strength of welded thin plates based on structural stress assessment

Remes, Heikki; Fricke, W.
2014 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)
ISSN: 0043-2288

J-integral-based approach to fatigue assessment of laser stake-welded T-joints

Frank, Darko; Remes, Heikki; Romanoff, Jani
2013 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Fatigue strength assessment of laser stake-welded web-core steel sandwich panels

Frank, Darko; Romanoff, Jani; Remes, Heikki
2013 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)
ISSN: 8756-758X

On the slope of the fatigue resistance curve for laser stake-welded T-joints

Frank, Darko; Remes, Heikki; Romanoff, Jani
2013 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)
ISSN: 8756-758X

Round robin study on local stress and fatigue assessment of lap joints and doubler plates

Fricke, Wolfgang; Codda, Matteo; Feltz, Olav; Garbatov, Yordan; Remes, Heikki; Risso, Giovanni; Rizzo, Cesare; Romanoff, Jani
2013 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)
ISSN: 1744-5302

Influence of initial distortion on the structural stress in 3 mm thick stiffened panels

Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2013 in THIN-WALLED STRUCTURES (Elsevier Limited)
ISSN: 0263-8231

Strain-based approach to fatigue crack initiation and propagation in welded steel joints with arbitrary notch shape

Remes, Heikki
2013 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Influence of surface integrity on the fatigue strength of high-strength steels

Remes, Heikki; Korhonen, Eero; Lehto, Pauli; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo
2013 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)
ISSN: 0143-974X

Hull-superstructure interaction in optimised passenger ships

Romanoff, Jani; Remes, Heikki; Varsta, Petri; Jelovica, Jasmin; Klanac, Alan; Niemelä, Ari; Bralic, Svemir; Naar, Hendrik
2013 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)
ISSN: 1744-5302

Block erection sequencing in shipbuilding with general lifting and joining times

Tokola, Henri; Niemi, Esko; Remes, Heikki
2013 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)
ISSN: 2158-2866

Fatigue strength of welded butt joints in thin and slender specimens

Lillemäe, Ingrit; Lammi, Heikki; Molter, Lars; Remes, Heikki
2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Continuum approach to fatigue crack initiation and propagation in welded steel joints

Remes, Heikki; Varsta, Petri; Romanoff, Jani
2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

Fatigue Assessment of Laser Stake-Welded T-Joints

Frank, Darko; Remes, Heikki; Romanoff, Jani
2011 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)
ISSN: 0142-1123

A multi-objective optimisation-based structural design procedure for the concept stage - a chemical product tanker case study

Ehlers, Sören; Remes, H.; Klanac, A.; Naar, H.
2010 in SHIP TECHNOLOGY RESEARCH (Schiffahrts Verlag Hansa)
ISSN: 0937-7255

Statistics of Weld Geometry for Laser-Hybrid welded Joints and Its Application within Notch Stress Approach

Remes, Heikki; Varsta, Petri
2010 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)
ISSN: 0043-2288

Round robin study on structural hot-spot and effective notch stress analysis

Fricke, Wolfgang; Bollero, Anfrea; Chirica, Ionel; Garbatov, Yordan; Jancart, Gabrice; Kahl, Adrian; Remes, Heikki; Rizzo, Cesare M.; von Selle, Hubertus; Urban, Axel; Wei, Liwu
2008 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)
ISSN: 1744-5302

Differences in Fatigue Strength between Arc and Laser Hybrid Welded Joints

Remes, Heikki; Varsta, Petri
2008 in JOURNAL OF SHIP PRODUCTION (Society of Naval Architects and Marine Engineers)
ISSN: 8756-1417

The stiffness of laser stake welded T-joints in web-core sandwich structures

Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko; Varsta, Petri
2007 in THIN-WALLED STRUCTURES (Elsevier Limited)
ISSN: 0263-8231

Laser-Welded Web-Core Sandwich Plates under Patch-Loading

Romanoff, Jani; Varsta, Petri; Remes, Heikki
2007 in MARINE STRUCTURES (Elsevier BV)

Book section, Chapters in research books

Committee V.3: Materials and fabrication technology

Caprace, J.-D.; Mishra, B.; Pires, F.; Roland, F.; Schipperen, I.; Andric, J.; Li, L.; Osawa, N.; Lindstrom, P.; Doig, R.; Remes, Heikki; Kim, M.H.
2015
ISBN: 9781138028951

Fatigue and Fracture (Committee III.2)

Biot, Marco; Bohlmann, Berend; Remes, Heikki; Ringsberg, Jonas; Horn, Agnes M.; Andersen, Michael; Cammen, Jeron van der; Aihara, Shuji; Choi, Byung Ki; Garbatov, Yordan; Mishra, Brajendra; Qian, Xudong; Samanta, Asokendu; Wang, Deyu; Zhang, Shengming
2012
ISBN: 978-3-87700-131

Fatigue and fracture (Committee III.2.)

Horn, A.M.; Andersen, M.R.; Biot, M.; Bohlmann, B.; Mahérault-Mougin, S.; Kozak, J.; Osawa, N.; Jang, Y.S.; Remes, H.; Ringsberg, J.; Cammen, J.van der
2009

Conference proceedings

Hydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel

Malitckii, Evgenii; Yagodzinskyy, Yuriy; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu
2017
ISBN: 9780791861387

Towards efficient crash analysis of large ship structures Equivalent single layer approach for stiffened orthotropic panels under tensile loading

Körgesaar, Mihkel; Reinaldo, Goncalves; Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki
2016
ISBN: 978-87-7475-473-2

Influence of welding distortion on the structural stress in thin deck panels

Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Avi, Eero; Romanoff, Jani
2016
ISBN: 978-87-7475-473-2

Fatigue strength modelling of high-performance welds using local approaches

Remes, Heikki; Jelovica, Jasmin; Romanoff, Jani; Lehto, Pauli; Liinalampi, Sami
2016
ISBN: 978-87-7475-473-2

Use of a Equivalent Single Layer Plate Theory in Ship Structural Design

Romanoff, Jani; Jelovica, Jasmin; Avi, Eero; Reinaldo, Goncalves; Körgesaar, Mihkel; Raikunen, Joni; Remes, Heikki; Niemelä, Ari; Reddy, Junthula; Varsta, Petri
2016
ISBN: 978-87-7475-473-2

Hull and superstructure interaction using coupled beam method

Toming, Risto; Kerge, Els-Hedvig; Naar, Hendrik; Tabri, Kristjan; Romanoff, Jani; Remes, Heikki
2016
ISBN: 978-87-7475-473-2

The effect of interacting small defects on the fatigue limit of a medium carbon steel

Åman, Mari; Okazaki, Saburo; Matsunaga, Hisao; Marquis, Gary B.; Remes, Heikki
2016 in Procedia Structural Integrity (Elsevier Science B.V.)
ISSN: 2452-3216

Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials

Frank, Darko; Romanoff, Jani; Remes, Heikki
2015
ISBN: 978-1-138-02789-3

Influence of Block Building Method on Outfitting Efficiency at an Assembly Shipyard

Kujala, L.M.; Nallikari, M.; Tokola, H.A.; Remes, H.
2015
ISBN: 978-1-909024-43-4

Fatigue strength of welded extra high-strength and thin steel plates

Remes, H.; Peltonen, M.; Seppänen, T.; Kukkonen, A.; Liinalampi, S.; Lillemäe, I.; Lehto, P.; Hänninen, H.; Romanoff, J.; Nummela, S.
2015
ISBN: 978-1-138-02789-3

The determination of ice-induced loads on ship hull from shear strain measurements

Suominen, Mikko; Romanoff, Jani; Remes, Heikki; Kujala, Pentti
2015
ISBN: 978-1-138-02789-3

Fatigue crack growth rate in laser-welded web core sandwich panels - fatigue crack propagation in welded base metal

Cernescu, Anghel; Romanoff, Jani; Lehto, Pauli; Remes, Heikki
2014

Fatigue assessment of large thin-walled structures with initial distortions

Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2014

Microstructure and strain -based fatigue life approach for high-performance welds

Remes, Heikki; Lehto, Pauli; Romanoff, Jani
2014

The effect of the secondary bending moment on the fracture strength evaluation of the laser welded joints from a web core sandwich structure

Cernescu, Anghel; Romanoff, Jani; Remes, Heikki
2013 in Key Engineering Materials (TRANS TECH PUBLICATIONS)
ISSN: 1013-9826

Fatigue strength of laser-welded thin plate ship structures based on nominal and structural hot-spot stress approach

Fricke, Wolfgang; Remes, Heikki; Feltz, Olav; Lillemäe, Ingrit; Tchuindjang, Didi; Reinert, Thomas; Nevierov, Alessandro; Sichermann, Wolfgang; Brinkmann, Markus; Kontkanen, Tuomo; Bohlmann, Berend; Molter, Lars
2013

Influence of Surface Integrity on the Fatigue Strength of High Strength Steel in Balcony Openings of Cruise Ship Structures

Korhonen, Eero; Remes, Heikki; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo.
2013

An Analytical Method for Cabin Deck Fundamental Frequency

Laakso, A.; Romanoff, J.; Remes, H.; Niemelä, A.
2013

Hull-Superstructure Interaction Induced Secondary Effects in Passenger Ships

Parmasto, Oliver; Romanoff, Jani; Remes, Heikki
2013
ISBN: 978-89-950016-1-5

Shear Response of Prismatic Ship Hull Girders

Romanoff, J.; Remes, H.; Varsta, P.; Melk, K.; Naar, H.; Niemelä, A.
2013

Cruise and Ferry Experience program for Future Passenger Ship Designers

Ahola, Markus; Romanoff, Jani; Kujala, Pentti; Remes, Heikki; Varsta, Petri
2011
ISBN: 978-1-905040-93-3

Round-Robin on Local Stress Determination and Fatigue Assessment of Load-Carrying Fillet-Welded Joints

Fricke, W.; Codda, M.; Feltz, O.; Garbatov, Y.; Remes, H.; Risso, G.; Rizzo, C.; Romanoff, J.
2011
ISBN: 978-0-203-80811-5

Hull/Superstructure-Interaction in Optimized Passenger Ships

Remes, Heikki; Romanoff, J.; Varsta, P.; Naar, H.; Niemelä, A.; Jelovica, J.; Klanac, A.; Bralic, S.
2011
ISBN: 978-0-203-80811-5

The IMPROVEd chemical tanker

Ehlers, Sören; Klanac, A.; Remes, H.; Kapuscik, K.; Naar, H.; Andric, J.; Zanic, V.; Grgic, M.; Pircalabu, E.; Bair, F.
2009

ConStruct - Platform for Conceptual Structural Design

Remes, Heikki; Klanac, A.; Varsta, P.; Ehlers, S.
2009

Structural Omni-Optimization of a Tanker

Klanac, Alan; Jelovica, Jasmin; Niemeläinen, Matias; Domagallo, Stanislaw; Remes, Heikki; Romanoff, Jani
2008
ISBN: 978-2-9600785-0-3

Round Robin study on structural hot-spot and effective notch stress analysis

Fricke, W.; Bollero, A.; Chirica, I.; Garbatov, Y.; Jancart, F.; Kahl, A.; Remes, H.; Rizzo, C.M.; von Selle, H.; Urban, A.; Wei, L.
2007
ISBN: 978-0-415-43725-7

Fatigue Strength between Arc and Laser Hybrid Welded Joints

Remes, Heikki; Varsta, Petri
2007
ISBN: 0-943870-04-6

Experimental and Theoretical Investigation of Fatigue Characteristics of Laser Hybrid Welded Joints

Remes, Heikki; Kujala, Pentti
2004
ISBN: 3-87743-807-5 (Vol. 1), 3-87743-808-3 (Vol. 2)

CO2-laser MAG Weldability of Laser Cutting LASER RAEX Steels, Hull Structural Steel Grade A and High Strength Formable Steel OPTIM RAEX 700 MC

Laitinen, Risto; Kujala, Pentti; Remes, Heikki; Nielsen, Steen Erik
2003

Fatigue Strength of Laser and Hybrid Weldements in Shipbuilding Industry

Remes, Heikki
2003

Fatigue Charasteristics of CO2-laser MAG Welded joints of Laser Cutting RAEX Steels

Remes, Heikki; Kujala, Pentti; Laitinen, Risto
2003

Non-refereed scientific articles

Unrefereed conference proceedings

Influence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)

Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani
2014

A new cylindrical cell honeycomb core

Cernescu, Anghel; Faur, Nicolae; Romanoff, Jani; Remes, Heikki
2013

Influence of initial distortion of thin 3 mm superstructure decks on hull girder response, IIW Document SC-SHIP-47-13

Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2013

Influencing factors on fatigue strength of welded thin plates based on structural stress assessment

Remes, H.; Fricke, W.
2013

Influence of the initial distortions on the fatigue assessment of thin stiffened deck panels, IIW Document XIII-2448-12

Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2012

Fatigue assessment of thick plate laser-welded T-joints

Frank, Darko; Remes, Heikki; Romanoff, Jani
2011

Statistics of weld geometry for a laser-hybrid welded joints and its application within notch stress approach

Remes, Heikki.; Varsta, Petri
2009

Rational model to assess fatigue at the early design stage

Remes, H.; Liigsoo, M.; Amrane, A.; Chirica, I.; Giuglea, V.; Giuglea, S.
2009

Fatigue Strength Modelling of Laser Welded Joints

Remes, Heikki
2003

Publications intended for professional communities

Article in professional journal

Aalto University: Research and Education in Welded Structures

Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu
2015 in HITSAUSTEKNIIKKA (Tampere Technology Centre Ltd)
ISSN: 0437-6056

Shipbuilding Methods & technologies: Reworking the fatigue model.

Remes, Heikki; Romanoff, Jani
2013 in The Naval architect (Royal Institution of Naval Architects)
ISSN: 0306-0209

Model for metal fatigue

Remes, Heikki
2013 in Maritime Risk International (Royal Institution of Naval Architects)
ISSN: 1742-9404

Hitsaustutkimus Aalto-yliopistossa

Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko
2012 in HITSAUSTEKNIIKKA (Royal Institution of Naval Architects)
ISSN: 0437-6056

Article in professional conference proceedings

Fatigue strength of thin laser-hybrid welded panels based on small- and full-scale tests

Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki
2016

Utilization of Homogenized and Non-Local Beam and Plate Theories in Ship Structural Design

Romanoff, Jani; Jelovica, Jasmin; Reddy, Junthula; Reinaldo, Goncalves; Remes, Heikki
2016

Characterisation of local grain size variation of welded structural steel.IIW Doc.No IX-2516-15 (IX-L-1137-15)

Lehto, Pauli; Remes, Heikki; Romanoff, Jani; Sarikka, Teemu
2015

Fatigue Strength Analysis of Laser-Hybrid Welds in Thin Plate Considering Actual Weld Geometry

Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Heikkilä, Sami; Porter, David
2015

Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints

Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Itävuo, Antti
2015

Influence of residual stresses on elasto-plastic response in HFMI-treated welded joint under different load ratios

Mikkola, Eeva; Remes, Heikki; Marquis, Gary
2015

Published development or research report

Ultimate strength tests of corroded web-core and corrugated-core sandwich beams

Jelovica, Jasmin; Romanoff, Jani; Ehlers, Soren; Remes, Heikki
2011

Stiffness and strength testing of laser stake welds in steel sandwich panels

Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko
2006

Fatigue test of CO2-laser hybrid and submerged arc welded butt joint of RAEX S275 LASER and NVA.Volume 1 and 2

Remes, Heikki
2003

Fatigue Strength Modelling of Lase Welded Joints

Remes, Heikki
2003

Fatigue test of CO2-laser, CO2-laser hybrid and submerged arc welded material of RAEX S275 LASER

Remes, Heikki; Socha, Grzegorz
2003

Fatigue test of laser, laser hybrid and arc welded butt and T-joints of RAEX S275 LASER, RAEX 420MC, RAEX 700 OPTIM, GL-A36TM and NVA steels

Tamminen, Tero; Remes, Heikki
2003

Fatigue Tests of Laser, Laser Hybrid and Arc Welded Butt and T-joints of Raex S275 Laser, Raec 420MC Laser, Raex 700 optim, GLA36TM and NVA Steels

Tamminen, Tero; Remes, Heikki
2003

Hattuprofiililla jäykistetyn levykentän väsymislujuus

Remes, H.
1999

Nosturirakenteen pääkannattimessa toteutetun laserhitsatun limiliitoksen lujuusanalyysi

Remes, H.; Kujala, P.
1997

Other experts

Looking for an expert?

Contact us and we'll find the best option for you.

Something went wrong. We're trying to fix this error.