Antti Korhonen

Professor at Aalto University School of Business

Schools

  • Aalto University School of Business

Links

Biography

Aalto University School of Business

Research Interests:

  • Sheet metal forming processes
  • Formability and forming limits
  • Constitutive models for plasticity
  • Forming and formability of stainless steels
  • Numerical simulation and modelling of metal forming processes
  • Rolling of metals
  • Thin films and hard coatings
  • Plasma nitriding and heat treatment
  • Nanostructured metals

Peer-reviewed scientific articles

Journal article-refereed, Original research

On the work-hardening of AA 3104 aluminum alloy

Korhonen, Antti S.
2013 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)
ISSN: 1059-9495

The Influence of Austenite Stability on Latge-strain Kinematic Hardening of Austenitic Stainless Steel steel research international

Manninen, T.; Myllykoski, P.; Korhonen, Antti
2012 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)
ISSN: 1611-3683

Forming and Fracture Limits of Two Metastable High-strength Austenitic Stainless Steels

Korhonen, Antti; Manninen, Timo; Larkiola, Jari
2011 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)
ISSN: 1611-3683

Forming and fracture limits of aluminum alloy

Korhonen, Antti; Heikinheimo, Erkki
2011 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)
ISSN: 0267-0836

Plastic deformation of solderless press-fit connectors

Manninen, T.; Kanervo, K.; Revuelta, A.; Larkiola, J.; Korhonen, A.S.
2007 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)
ISSN: 0921-5093

Logistics from IMS towards virtual factory

Cser, L.; Cselenyi, J.; Geiger, M.; Mäntylä, M.; Korhonen, A.S.
2000 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Surface Engineering with Light Alloys - Hard Coatings, Thin Films and Plasma Nitriding

Korhonen, A.; Harju, E.
2000 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)
ISSN: 1059-9495

Formation of a wear resistant non-metallic protective layer on PVD-coated cutting and forming tools

Harju, E.; Kivivuori, S.; Korhonen, A.S.
1999 in Surface & Coating Technology (Springer New York)

Structure investigations of wear reducing non-metallic layers on TiN-coated HSS turning tools

Harju, E.; Korhonen, A.S.; Adamik, M.; Barna, P.B.
1999 in Surface & Coatings Technology (Springer New York)

The role of neural networks in the optimisation of rolling processes

Larkiola, J.; Myllykoski, P.; Korhonen, A.; Cser, L.
1998 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Suomalaisia kokemuksia yliopistojen ja teollisuuden välisestä yhteistyöstä materiaalitieteessä ja fysikaalisessa metallurgiassa

Sulonen, M.S.; Korhonen, A.S.
1997 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)

Effect of the heat-transfer coefficient in ring-compression test

Andersson, K.; Kivivuori, S.; Korhonen, A.S.
1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Effect of work material composition on the wear life of TiN-coated tools

Harju, Esko; Korhonen, A.S.; Laizhu, Jiang; Ristolainen, E.
1996 in Surface and Coating Technology (Elsevier BV)

Levynmuovaajat kokoontuivat Unkarin helteessä

Korhonen, A.
1996 in Ohutlevy (Elsevier BV)

Muovausmenetelmät ja materiaalit, joilla auton painoa voidaan vähentää

Korhonen, Antti; Hayashi, H.
1996 in Ohutlevy (Elsevier BV)

Prediction of rolling force in cold rolling by using physical models and neural computing

Larkiola, J.; Myllykoski, P.; Nylander, J.; Korhonen, A.S.
1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Uusia mikroskopiatekniikoita kehitetään Teknillisessä korkeakoulussa

Penttinen, I.; Korhonen, A.S.
1995 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)

Corrosion of thin hard PVD coatings

Korhonen, A.
1994 in VACUUM (Elsevier Limited)

Corrosion behavior of decorative car parts and outdoor lighting fixtures fabricated from TiN-coated stainless steel

Pischow, Kaj; Eriksson, L.; Korhonen, A.S.; Forsen, O.; Turkia, M.; Ristolainen, E.O.
1994 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

Ion beam etching technique in the preparation of samples for cross-sectional microscopy studies of thin films and hard coatings

Pischow, Kaj; Korhonen, A.S.; Adamik, M.; Barna, P.B.
1994 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

Cross-section X-scanning force microscopy analysis of different hard coatings and thin films

Pischow, Kaj; Adamik, M.; Barna, P.B.; Korhonen, A.S.
1994 in Journal of Vacuum Science and Technology. Part B. Microelectronics and Nanometer Structures (Elsevier Science)

Comparison of two commercial FEM codes in cold extrusion simulation

Reinikainen, Tommi; Welo, T.; Korhonen, A.S.; Kivivuori, Seppo
1994 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Teräslevyn repeilystä ongelmia television kuvaputken kehysten taivutuksessa

Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)

Teräksen sinkki- ja alumiinipinnoitteet

Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)

Lävistys- ja leikkaustyökaluista

Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)

Tutkaheijastuksen vähentäminen levykonstruktioissa

Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)

Effects of Voltage Pulses on Precipitates During Scanning Tunneling Microscopy Studies

Pischow, Kaj; Korhonen, A.S.
1993 in MATERIALS CHARACTERIZATION (Elsevier Inc.)

Scanning Tunneling Microscopy Study of Precipitates in a Microalloyed Steel

Pischow, Kaj; Haraldsen, A.K.; Korhonen, A.S.
1993 in MATERIALS CHARACTERIZATION (Elsevier Inc.)

The influence of titanium interlayers on the adhesion of PVD TiN coatings on oxidized stainless steels substrates

Pischow, Kaj; Eriksson, L.; Harju, E.; Korhonen, A.S.; Ristolainen, E.O.
1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

The Influence of Titanium Interlayers on the Adhesion of PVD TiN Coating on oxidized Stainless Steel Substrates

Pischow, K.A.; Eriksson, L.; Harju, E.; Korhonen, A.S.; Ristolainen, E.O.
1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

Nopeutetun jäähdytyksen laitteisto ja sen käyttö tutkimustyössä

Ranta, Heikki; Korhonen, Antti
1993 in Teräspalat (Elsevier Science)

Computer-aided modeling of a new copper extrusion process

Reinikainen, Tommi; Korhonen, A.S.; Andersson, Klas; Kivivuori, S.
1993 in Annals of the CIRP (Elsevier Science)

Finite-element analysis of copper extrusion processes

Andersson, K.; Kivivuori, S.; Korhonen, A.S.; Reinikainen, Tommi
1992 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Formability and Corrosion Resistance of TiN-coated Stainless Steel Sheet

Harju, E.; Korhonen, Antti; Pischow, K.; Eriksson, Leif
1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

Hot wear resistance of TiN-coated mould and tool materials

Kivivuori, S.O.; Korhonen, A.S.; Pishow, Kaj
1992 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)

Superplastinen muovaus - levynmuovauksen erikoismenetelmä

Korhonen, A.
1992 in Ohutlevyuutiset (Elsevier BV)

Comparison of the Corrosion Resistance of TiN and (Ti, Al)N coatings

Korhonen, A.S.; Harju, E.; Turkia, M.A.; Forsen, O.; Ristolainen, E.O.
1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

Uusia materiaaliratkaisuja auton teräksisten levypyörien valmistukseen

Korhonen, A.
1992 in Ohutlevyuutiset (Elsevier Science)

Pidätyspaineen säätäminen syvävedossa

Korhonen, A.
1992 in Ohutlevyuutiset (Elsevier Science)

Comparison of the corrosion resistance of TiN and (Ti,Al)N coatings

Penttinen, I.; Korhonen, A.S.; Harju, E.; Turkia, M.A.; Forsen, O.; Ristolainen, E.O.
1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)

Book section, Chapters in research books

Application of forming simulation in the post-buckling analysis of cold-formed stainless steel columns

Manninen, Timo; Korhonen, A.S.; Larkiola, J.
2003

Modelling of deep drawing of stainless steel

Manninen, T.; Larkiola, J.; Korhonen, Antti
2002

Three-dimensional numerical modeling of continuous extrusion

Manninen, T.; Ramsay, P.; Korhonen, Antti
2002

Modeling and optimization of metal forming processes

Manninen, T.; Larkiola, J.; Czer, L.; Revuelta, A.; Korhonen, Antti
2002

Editors Preface

Seeger, A.; Korhonen, Antti
2002

Data Mining in Metalforming.New Possibility in Tool Life Analysis?

Cser, L.; Korhonen, Antti
2001

Modelling and optimisation of thermomechanical processing of metals

Myllykoski, P.; Larkiola, J.; Ahokainen, T.; Korhonen, A.; Cser, L.
1999

Conference proceedings

Forming and fracture limits of an aluminum alloy

Korhonen, Antti; Heikinheimo, Erkki; Koivunen, Petri
2010
ISBN: 0-9659463-2-0

Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels

Korhonen, Antti; Manninen, Timo; Larkiola, Jari
2010
ISBN: 978-3-85125-108-1

Comparsion of Forming and Fracture Limits of an Aluminum Alloy and Austenitic Stainless Steel

Korhonen, A; Manninen, T.; Yoon, J.-W.; Larkiola, J.
2009

On the forming and fracture limits of sheet metals

Korhonen, A.; Manninen, T.; Yoon, J.-W.
2009

Comparison of forming and fracture limits of an aluminum alloy and austenitic stainless steel

Korhonen, A.; Manninen, T.; Yoon, J.-W.; Larkiola, J.
2009

Large-Strain Bauschinger Effect in Austenitic Stainless Steel Sheet,

Manninen, T.; Myllykoski, P.; Taulavuori, T.; Korhonen, A
2009

Severe Plastic Deformation (SPD) Processes for Metals

Azushima, Akira; Kopp, Reiner; Korhonen, Antti; Yang, D.Y.; Micari, Fabrizio; Lahoti, G.D.; Groche, Peter; Yanagimoto, Jun; Tsuji, N.; Rosochowski, Andrzej; Yanagida, Akira
2008

Forming and fracture criteria for austenitic stainless steel sheets

Korhonen, Antti; Manninen, Timo
2008

Comparison of two commercial FE codes for sheet metal forming

Revuelta, A.; Kanervo, K.; Myllykoski, P.; Larkiola, J.; Korhonen, A.S.
2007
ISBN: 978-0-7354-0415-1
ISSN: 0094-243X

Hardening models for austenitic stainless steels

Kanervo, K.; Manninen, T.; Korhonen, A.S.
2006

On formability and forming limits of austenitic stainless steels

Kanervo, K.; Manninen, T.; Larkiola, J.; Korhonen, A.S.
2006
ISBN: 83-89541-66-1

Plastic deformation of solderless press-fit connectors

Manninen, Timo; Kanervo, Kalle; Revuelta, A.; Larkiola, J.; Korhonen, Antti
2005
ISBN: 88-87331-74-X

Flash formation in continuous extrusion

Manninen, Timo; Ramsay, P.; Korhonen, Antti
2005
ISBN: 973-27-1175-2

Deep drawing of double bowl kitchen sinks of stainless steel

Häkkinen, E.; Korhonen, A.; Manninen, T.; Toivanen, T.; Tarkiainen, R.
2000

Process State Monitoring Based on Data Mining in Hot Rolling

Cser, L.; Korhonen, A.S.; Simula, O.; Ruha, P.
1999

Data mining in improving the geometric quality parameters of hot rolled strips

Cser, L.; Korhonen, A.S.; Mäntylä, P.; Simula, O.
1999

Uj modszerek a meleghengerlesi folyamatok elemzeseben es a folyamatkövetesben

Cser, L.; Korhonen, A.S.; Gulyas, J.; Reiss, G.; Myllykoski, P.; Larkiola, J.
1999

Data Mining and State Monitoring in Hot Rolling

Cser, L.; Korhonen, A.S.; Gulyas, J.; Mäntylä, P.; Simula, O.; Reiss, G.; Ruha, P.
1999

Notes on the history of iron and steel making and processing

Korhonen, A.
1999

Metals replacing ceramics in catalytic converters

Korhonen, A.
1999

Predicting and modelling flatness with neural networks

Larkiola, J.; Korhonen, A.; Cser, L.
1999

A Three Dimensional Finite Element Analysis of Hot Forging a Part for the Automotive Industry

Andersson, K.; Katajarinne, T.; Kivivuori, S.; Korhonen, A.S.
1998

Application of Neural Networks for Modelling of Rolling and Annealing of Steel Strip

Cser, L.; Korhonen, A.S.; Larkiola, J.; Myllykoski, P.; Simula, O.
1998

Application of neural networks in rolling of steel

Korhonen, A.; Larkiola, J.
1998

Application of neural networks in analysis of formability and flatness of steel strips

Myllykoski, P.; Larkiola, J.; Korhonen, A.S.
1998

Finnish experiences on university - industry collaboration in materials science and physical metallurgy

Korhonen, A.S.; Sulonen, M.S.
1997

Effect of work material composition on the cutting performance of PVD TiN-coated tools

Korhonen, A.
1997

Determining tandem cold rolling efficiency using physical models and neural computing

Larkiola, J.; Nylander, J.; Myllykoski, P.; Korhonen, A.S.
1996

Investigations of surface morphology, friction, elasticity and adhesion by SFM: Examples from metallurgy, polymers and biology

Leijala, A.; Penttinen, I.; Korhonen, A.S.
1996

Applications of scanning force microscopy

Leijala, A.; Penttinen, I.; Korhonen, A.S.; Utriainen, M.
1996

Prediction of the friction coefficient in cold rolling by neural computing

Myllykoski, P.; Nylander, J.; Korhonen, A.S.
1995

Finite-Element Modelling of Metal Forming Processes

Andersson, K.; Korhonen, A.S.
1994

Calculation of the Hardness Distribution in Cooled Steel Products

Kivivuori, S.; Korhonen, A.S.
1994

Hydromekanisk formgivning

Eriksson, Leif; Korhonen, Antti
1993

Profilvalsning-kontrol av processparametrar genom töjningnivåberäkningar

Larkiola, Jari; Eriksson, Leif; Häkkinen, Erkki; Korhonen, Antti
1993

Experiments on the Modelling of Profile in the Cold Rolling of Strips

Larkiola, Jari; Nylander, J.; Korhonen, A.S.
1993

Recycled cold-forged steels

Penttinen, Ilkka; Kivivuori, S.; Korhonen, A.S.
1993

The Effects of different Interlayers on the Corrosion and high temperature oxidation behavior of TiN Coated Steel Samples

Pischow, K.A.; Korhonen, A.S.Ristolainen; Rossi, F.; Datta, P.K.
1993

STM and SIMS Analysis of the Interfaces and Intermediate Layers of TiN/Ti/Substrate Systems

Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.
1993

Elevated Temperature Wear Surface of Some Mould Materials Studied by STM and SIMS

Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.
1993

SFM and SIMS study of tribofilms growing on TiN coatings during an elevated temperature wear test

Pischow, Kaj; Korhonen, A.S.; Ristolainen, E.O.
1993

Depth Profiling with STM

Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.
1993

STM and SIMS Study of Tribofilms Growing on TiN Coatingh during and elevated Temperature

Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.
1993

Study of Tribofilms Growing on TiN Coatingh during an Elevated Temperature Wear Test

Pischow, K.A.; Korhonen, A.S.; Ristolainen, Eero O.
1993

A Study of Scale-Effects During Accelerated Cooling

Ranta, Heikki; Larkiola, J.; Korhonen, A.S.; Nikula, A.
1993

Prediction of the hardness of a hot-forged steel product

Andersson, Klas; Kivivuori, S.; Korhonen, A.S.
1992

Computer Aided Forging Die Design Based on the Simulation of Metal Flow

Andersson, Klas; Kivivuori, S.; Korhonen, A.S.
1992

Numerical prediction of the mechanical properties of a microalloyed steel and low-carbon forging steel after controlled cooling

Kivivuori, S.; Andersson, Klas; Korhonen, A.S.; Ollilainen, V.
1992

Simulation of cold roll forming

Larkiola, Jari; Eriksson, L.; Korhonen, A.S.
1992

The Effects of Prolonged Scanning on the Oxidized Stainless Steel Substrate during Scanning Tunneling Microscopy

Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.
1992

The Influence of Sputtering Time and Tatanium Interlayers on the Adhesion of PVD TiN Coating on Stainless Steel Substrate

Pischow, K.A.; Ristolainen, E.O.; Eriksson, I.; Harju, E.; Korhonen, A.S.
1992

Simulation of copper extrusion by using Finite-element method

Reinikainen, Tommi; Kivivuori, S.; Korhonen, A.S.
1992

Comparison of two commercial FEM codes in metal forming simulations

Reinikainen, Tommi; Andersson, Klas; Kivivuori, S.; Korhonen, A.S.
1992

Non-refereed scientific articles

Unrefereed conference proceedings

Forming and fracture limits of aluminum alloy

Korhonen, Antti; Heikinheimo, Erkki
2011

Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels

Korhonen, Antti; Manninen, Timo; Larkiola, Jari
2011

Publications intended for professional communities

Article in professional journal

Forming and fracture limits of austenitic stainless steel sheets

Korhonen, Antti; Manninen, Timo
2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)
ISSN: 0921-5093

Forming and fracture limits of austenitic stainless steel sheet

Korhonen, Antti; Manninen, Timo
2008 in MEFORM 2008, Internationale Tagung zur Simulation von Umformprozessen (ELSEVIER SCIENCE SA LAUSANNE)

Forming and fracture limits of austenitic stainless steel sheet

Korhonen, Antti; Manninen, Timo
2008 in Plasticity (ELSEVIER SCIENCE SA LAUSANNE)

Large-Strain Baushinger Effect In AISI 301 Type Austenitic Stainless Steel Sheet

Manninen, Timo; Taulavuori, Tero; Myllykoski, Pirkka; Korhonen, Antti
2008 in The 9th International Conference on Technology of Plasticity (ICTP 2008) (ELSEVIER SCIENCE SA LAUSANNE)

Saksassa tutkitaan uusia levynmuovausmenetelmiä

Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)

Levynmuovaajat koolla Colmarissa Ranskassa

Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)

Räätälöityjä levyaihioita teräksestä ja alumiinista

Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)

Ruostumaton teräsohutlevy korvaa keraameja auton katalysaattorissa

Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)

Kevyitä rakenteita jäykistä monikerroslevyistä

Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)

Published development or research report

Ohutlevyjen muovattavuuden perusteet, Oulun yliopiston oppimateriaalia

Korhonen, Antti; Larkiola, Jari
2012

Biennial report 1993-94

Korhonen, Antti
1995

Biennial report 1991-92

Korhonen, A.
1993

Terästen kontrolloitu valssaus ja nopeutettu jäähdytys KTM Dn:o 261/881/88

Ranta, Heikki; Korhonen, Antti
1993

Controlled rolling and accelerated cooling of steel, KTM Dn:o 261/881/88

Ranta, Heikki; Korhonen, Antti; Partinen, Seija
1993

Tillämpning av FEM vid varmvalsning

Haraldsen, Ane Kristin; Ranta, N.N.; Malinen, N.N.; Korhonen, A.S.
1992

The Use of STM and SIMS in the Study of the Interlayers and the Interfaces in TiN Hard Coatings

Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.
1992

The Reactions of the Interlayer between PVD TiN Coating and Oxidized Stainless Steel Substrate

Pischow, K.A.; Korhonen, A.S.; Barna, P.A.; Ristolainen, E.O.
1992

Read about executive education

Other experts

Glen Cooper

Biography Glen studied as a post graduate student in MACE on the Mechanical Engineering Design MSc and then stayed on to complete a PhD in the Design Reliable Systems funded jointly by EPSRC & Volvo Cars. Glen left MACE to join the University of Sheffield as a Research Assistant to test and m...

Gregory Vanel

Areas of expertise Economy of Globalization International Political Economy Accounting norms and conceptual framework International relationships Money-Finance Biography Grégory Vanel, French Dissertation in international economics and Canadian Ph.D in political science. Grégory Vanel taught se...

Looking for an expert?

Contact us and we'll find the best option for you.

Something went wrong. We're trying to fix this error.