Antero Arkkio
Professor of Electrical Engineering at Aalto University School of Business
Schools
- Aalto University School of Business
Links
Biography
Aalto University School of Business
Peer-reviewed scientific articles
Journal article-refereed, Original researchAdditional Losses of Electrical Machines under Torsional Vibration
Arkkio, A.; Cederstrom, S.; Awan, H. Asad Ali; Saarakkala, S. E.; Holopainen, T. P.2017 in IEEE TRANSACTIONS ON ENERGY CONVERSION (Institute of Electrical and Electronics Engineers)ISSN: 0885-8969Modeling the Effect of Multiaxial Stress on Magnetic Hysteresis of Electrical Steel Sheets: A Comparison
Aydin, U.; Rasilo, P.; Martin, F.; Singh, D.; Daniel, L.; Belahcen, A.; Kouhia, R.; Arkkio, A.2017 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Magneto-mechanical modeling of electrical steel sheets
Aydin, Ugur; Rasilo, Paavo; Martin, Floran; Singh, Deepak; Daniel, Laurent; Belahcen, Anouar; Rekik, Mahmoud; Hubert, Olivier; Kouhia, Reijo; Arkkio, Antero2017 in JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (Elsevier Science B.V.)ISSN: 0304-8853Simulation of an Induction Motor’s Rotor After Connection
Climente-Alarcon, Vicente; Sundaria, Ravi; Panchal, Jay; Arkkio, Antero2017 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Combined Model for Simulating the Effect of Transients on a Damaged Rotor Cage
Climente-Alarcon, Vicente; Nair, Devi; Sundaria, Ravi; Antonino-Daviu, Jose A.; Arkkio, Antero2017 in IEEE Transactions on Industry Applications (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0093-9994Identification of Magnetic Properties for Cutting Edge of Electrical Steel Sheets
Holopainen, Timo P.; Rasilo, Paavo; Arkkio, Antero2017 in IEEE Transactions on Industry Applications (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0093-9994Reduced Basis Finite Element Modeling of Electrical Machines with Multiconductor Windings
Lehikoinen, Antti; Arkkio, Antero; Belahcen, Anouar2017 in IEEE Transactions on Industry Applications (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0093-9994Domain Decomposition Approach for Efficient Time-Domain Finite-Element Computation of Winding Losses in Electrical Machines
Lehikoinen, Antti; Ikäheimo, Jouni; Arkkio, Antero; Belahcen, Anouar2017 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Inverse Thermal Modeling to Determine Power Losses in Induction Motor
Nair, Devi Geetha; Arkkio, Antero2017 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Efficient finite element method to estimate eddy current loss due to random interlaminar contacts in electrical sheets
Shah, Sahas Bikram; Rasilo, Paavo; Hakula, Harri; Arkkio, Antero2017 in INTERNATIONAL JOURNAL OF NUMERICAL MODELLING: ELECTRONIC NETWORKS DEVICES AND FIELDS (John Wiley and Sons Ltd)ISSN: 0894-3370Influence of the rotor eccentricity on the torque of a cage induction machine
Silwal, Bishal; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2017 in Archives of Electrical Engineering (Wydawnictwo Naukowe PWN)ISSN: 1427-4221Modelling anisotropy in non-oriented electrical steel sheet using vector Jiles-Atherton model
Upadhaya, Brijesh; Martin, Floran; Rasilo, Paavo; Handgruber, Paul; Belahcen, Anouar; Arkkio, Antero2017 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)ISSN: 0332-1649Space-Vector Models for Torsional Vibration of Cage Induction Motors
Arkkio, Antero; Holopainen, Timo P.2016 in IEEE Transactions on Industry Applications (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0093-9994Coupled Magneto-Mechanical Analysis of Iron Sheets under Biaxial Stress
Aydin, U.; Rasilo, P.; Singh, D.; Lehikoinen, A.; Belahcen, A.; Arkkio, A.2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464The Use of a Multilabel Classification Framework for the Detection of Broken Bars and Mixed Eccentricity Faults Based on the Start-Up Transient
Georgoulas, George; Climente-Alarcon, Vicente; Antonino-Daviu, Jose A.; Tsoumas, Ioannis P.; Stylios, Chrysostomos D.; Arkkio, Antero; Nikolakopoulos, George2016 in IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (IEEE Computer Society)ISSN: 1551-3203Efficient Finite-Element Computation of Circulating Currents in Thin Parallel Strands
Lehikoinen, Antti; Arkkio, Antero2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Monte Carlo Analysis of Circulating Currents in Random-Wound Electrical Machines
Lehikoinen, Antti; Chiodetto, Nicola; Lantto, Erkki; Arkkio, Antero; Belahcen, Anouar2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Model of Magnetic Anisotropy of Non-Oriented Steel Sheets for Finite-Element Method
Martin, Floran; Singh, Deepak; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Energy-Preserving Methods and Torque Computation from Energy Balance in Electrical Machine Simulations
Perkkiö, Lauri; Rasilo, Paavo; Silwal, Bishal; Hannukainen, Antti; Arkkio, Antero; Eirola, Timo2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress
Rasilo, P.; Singh, D.; Aydin, U.; Martin, F.; Kouhia, R.; Belahcen, A.; Arkkio, A.2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Numerical Analysis of the Power Balance of an Electrical Machine with Rotor Eccentricity
Silwal, B.; Rasilo, P.; Perkkiö, Lauri; Hannukainen, A.; Eirola, T.; Arkkio, A.2016 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Diagnosis of Induction Motors Under Varying Speed Operation by Principal Slot Harmonic Tracking
Climente-Alarcon, Vicente; Antonino-Daviu, Jose A.; Haavisto, Ari; Arkkio, Antero2015 in IEEE Transactions on Industry Applications (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0093-9994Analytical model for magnetic anisotropy of non-oriented steel sheets
Martin, Floran; Singh, Deepak; Belahcen, Anouar; Rasilo, Paavo; Haavisto, Ari; Arkkio, Antero2015 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)ISSN: 0332-16493D permeance model of induction machines taking into account saturation effects and its connection with stator current and shaft speed spectra
Martinez, Javier; Belahcen, Anouar; Arkkio, Antero2015 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Identification of Synchronous Machine Magnetization Characteristics From Calorimetric Core-Loss and No-Load Curve Measurements
Rasilo, Paavo; Abdallh, Ahmed; Belahcen, Anouar; Arkkio, Antero; Dupre, Luc2015 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Estimation of additional losses due to random contacts at the edges of stator of an electrical machine
Shah, Sahas Bikram; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2015 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)ISSN: 0332-1649Effect of Mechanical Stress on Excess Loss of Electrical Steel Sheets
Singh, Deepak; Rasilo, Paavo; Martin, Floran; Belahcen, Anouar; Arkkio, Antero2015 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Segregation of Iron Losses From Rotational Field Measurements and Application to Electrical Machine
Belahcen, Anouar; Rasilo, Paavo; Arkkio, Antero2014 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Particle filter-based estimation of instantaneous frequency for the diagnosis of electrical asymmetries in induction machines
Climente-Alarcon, Vicente; Antonino-Daviu, Jose Alfonso; Haavisto, Ari; Arkkio, Antero2014 in IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (Institute of Electrical and Electronics Engineers Inc.)ISSN: 0018-9456A 2D FEM analysis of electromechanical signatures in induction motors under dynamic eccentricity
Martinez, Javier; Belahcen, Anouar; Detoni, Joaquim; Arkkio, Antero2014 in INTERNATIONAL JOURNAL OF NUMERICAL MODELLING: ELECTRONIC NETWORKS DEVICES AND FIELDS (John Wiley and Sons Ltd)ISSN: 0894-3370Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed Synchronous Motors
Rasilo, P.; Belahcen, A.; Arkkio, A.2014 in IEEE Transactions on Industry Applications (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0093-9994Instantaneous power balance in finite-element simulation of electrical machines
Rasilo, Paavo; Perkkio, Lauri; Hannukainen, Antti; Silwal, Bishal; Eirola, Timo; Arkkio, Antero2014 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Comparison of finite-element based state-space models for PM synchronous machines
Rasilo, Paavo; Lemesle, Marc-Antoine; Belahcen, Anouar; Arkkio, Antero; Hinkkanen, Marko2014 in IEEE TRANSACTIONS ON ENERGY CONVERSION (Institute of Electrical and Electronics Engineers)ISSN: 0885-8969Computation of torque of an electrical machine with different types of finite element mesh in the air gap
Silwal, Bishal; Rasilo, Paavo; Perkkiö, Lauri; Oksman, Miika; Hannukainen, Antti; Eirola, Timo; Arkkio, Antero2014 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Rotor radial position control and its effect on the total efficiency of a bearingless induction motor with a cage rotor
Sinervo, Anssi; Arkkio, Antero2014 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Magnetomechanical coupled FE simulations of rotating electrical machines
Belahcen, Anouar; Fonteyn, Katarzyna; Kouhia, Reijo; Rasilo, Paavo; Arkkio, Antero2013 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)ISSN: 0332-1649Broken bar indicators for cage induction motors and their relationship with the number of consecutive broken bars
Martinez, Javier; Belahcen, Anouar; Arkkio, Antero2013 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Experimental determination and numerical evaluation of core losses in a 150-kVA wound-field synchronous machine
Rasilo, P.; Belahcen, A.; Arkkio, A.2013 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Iron Losses, Magnetoelasticity and Magnetostriction in Ferromagnetic Steel Laminations
Rasilo, P.; Singh, D.; Belahcen, A.; Arkkio, A.2013 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Modeling of Losses Due to Inter-Laminar Short-Circuit Currents in Lamination Stacks
Shah, Sahas; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2013 in ELECTRICAL, CONTROL AND COMMUNICATION ENGINEERING (Institute of Electrical and Electronics Engineers)ISSN: 2255-9140Eccentricity related forces in two-pole induction motor with four-pole stator damper winding analyzed using measured rotor orbits
Sinervo, Anssi; Arkkio, Antero2013 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Numerical Investigation of the Effects of Loading and Slot Harmonics on the Core Losses of Induction Machines
Dlala, Emad; Bottauscio, Oriano; Chiampi, Mario; Zucca, Mauro; Belahcen, Anouar; Arkkio, Antero2012 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Contribution of Maxwell stress in air on the deformations of induction machines
Fonteyn, Katarzyna Anna; Belahcen, Anouar; Rasilo, Paavo; Kouhia, Reijo; Arkkio, Antero2012 in JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (Korean Institute of Electrical Engineers)ISSN: 1975-0102A hybrid PBIL-based harmony search method
Gao, X.Z.; Wang, X.; Jokinen, T.; Ovaska, S.J.; Arkkio, A.; Zenger, K.2012 in NEURAL COMPUTING AND APPLICATIONS (Springer London)ISSN: 0941-0643A hybrid optimization method for wind generator design
Gao, X.Z.; Wang, X.; Jokinen, T.; Ovaska, S.J.; Arkkio, A.; Zenger, K.2012 in INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING, INFORMATION AND CONTROL (Springer London)Eddy-Current Loss Modeling for a Form-Wound Induction Motor Using Circuit Model
Huynh Van, Khang; Arkkio, Antero2012 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Loss minimization for form-wound stator winding of a high-speed induction motor
Huynh Van, Khang; Arkkio, Antero; Saari, Juha2012 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Parameter estimation for a deep-bar induction motor
Huynh Van, Khang; Arkkio, Antero2012 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660A 2D FEM model for transient and fault analysis of induction machines
Martinez, Javier; Belahcen, Anouar; Arkkio, Antero2012 in PRZEGLAD ELEKTROTECHNICZNY (Wydawnictwo SIGMA - N O T Sp. z o.o.)ISSN: 0033-2097Calorimetric system for measurement of synchronous machine losses
Rasilo, Paavo; Ekström, Jussi; Haavisto, Ari; Belahcen, Anouar; Arkkio, Antero2012 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Importance of Iron-Loss Modeling in Simulation of Wound-Field Synchronous Machines
Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2012 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Including slot harmonics to mechanical model of two-pole induction machine with a force actuator
Sinervo, Anssi; Arkkio, Antero2012 in MECHANICAL SYSTEMS AND SIGNAL PROCESSING (Academic Press Inc.)ISSN: 0888-3270Controlling rotor vibrations of a two-pole induction machine with unipolar actuator
Sinervo, Anssi; Jokela, Tommi; Arkkio, Antero2012 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Fault diagnosis in induction motors using the Hilbert-Huang transform
Antonino-Daviu, Jose; Riera-Guasp, Martin; Pineda-Sanchez, Manuel; Puche-Panadero, Ruben; Pérez, R.B.; Jover-Rodriguez, Pedro; Arkkio, Antero2011 in NUCLEAR TECHNOLOGY (AMER NUCLEAR SOC)ISSN: 0029-5450Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools
Climente-Alarcon, Vicente; Antonino-Daviu, Jose; Riera-Guasp, Martin; Pons-Llinares, Joan; Roger-Folch, Jose; Jover-Rodriguez, Pedro; Arkkio, Antero2011 in MECHANICAL SYSTEMS AND SIGNAL PROCESSING (Academic Press Inc.)ISSN: 0888-3270Power limits of high-speed permanent-magnet electrical machines for compressor applications
Kolondzovski, Zlatko; Arkkio, Antero; Larjola, Jaakko; Sallinen, Petri2011 in IEEE TRANSACTIONS ON ENERGY CONVERSION (Institute of Electrical and Electronics Engineers)ISSN: 0885-8969Circuit models for predicting core losses in the stator and rotor of a caged induction machine with sinusoidal supplies
Laldin, Omar; Dlala, Emad; Arkkio, Antero2011 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Model of laminated ferromagnetic cores for loss prediction in electrical machines
Rasilo, P.; Dlala, E.; Fonteyn, K.; Pippuri, J.; Belahcen, A.; Arkkio, A.2011 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Low-frequency oscillation in rotor vibration of a two-pole induction machine with extra four-pole stator winding
Sinervo, Anssi; Laiho, Antti; Arkkio, Antero2011 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Finite-element analysis for a rolling-rotor electrical machine
Arkkio, Antero; Biernat, Adam; Bucki, Bogdan; Kaminski, Grzegorz; Niemenmaa, Asko; Smak, Andrzej; Staszewski, Pawel2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Computation of additional losses due to rotor eccentricity in electrical machines
Belahcen, Anouar; Arkkio, Antero2010 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660On the importance of incorporating iron losses in the magnetic field solution of electrical machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Interdependence of hysteresis and eddy-current losses in laminated magnetic cores of electrical machines
Dlala, Emad; Belahcen, Anouar; Pippuri, Jenni; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464FEM for directly coupled magneto-mechanical phenomena in electrical machines
Fonteyn, Katarzyna; Belahcen, Anouar; Kouhia, Reijo; Rasilo, Paavo; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Eddy-current losses and temperature rise in the form-wound stator winding of an inverter-fed cage induction motor
Islam, Mohammed Jahirul; Huynh, Van Khang; Repo, Anna-Kaisa; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Rotordynamic analysis of different rotor structures for high-speed permanent-magnet electrical machines
Kolondzovski, Zlatko; Sallinen, Petri; Belahcen, Anouar; Arkkio, Antero2010 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660End-winding vibrations caused by steady-state magnetic forces in an induction machine
Lin, Ranran; Laiho, Antti; Haavisto, Ari; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Analysis of eddy-current loss in end shield and frame of a large induction machine
Lin, Ranran; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Axial flux and eddy-current loss in active region of a large-sized squirrel-cage induction motor
Lin, Ranran; Haavisto, Ari; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Numerical pulse test for synchronous machines
Mäkelä, Olli; Repo, Anna-Kaisa; Arkkio, Antero2010 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)ISSN: 0332-1649Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Niemenmaa, Asko; Salmia, Lauri; Arkkio, Antero; Saari, Juha2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Inclusion of eddy currents in laminations in two-dimensional finite element analysis
Pippuri, Jenni; Belahcen, Anouar; Dlala, Emad; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Interdependence of demagnetization, loading, and temperature rise in a permanent-magnet synchronous motor
Ruoho, Sami; Kolehmainen, Jere; Ikäheimo, Jouni; Arkkio, Antero2010 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Transient detection of eccentricity-related components in induction motors through the Hilbert-Huang transform
Antonino-Daviu, Jose; Jover Rodriguez, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose; Perez, R.B.2009 in ENERGY CONVERSION AND MANAGEMENT (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0196-8904Detection of combined faults in induction machines with stator parallel branches through the DWT of the start-up current
Antonino-Daviu, Jose; Jover Rodriguez, Pedro; Riera-Guasp, Martin; Pineda-Sánchez, M.; Arkkio, Antero2009 in MECHANICAL SYSTEMS AND SIGNAL PROCESSING (Academic Press Inc.)ISSN: 0888-3270A General Model for Investigating the Effects of the Frequency Converter on the Magnetic Iron Losses of a Squirrel-Cage Induction Motor
Dlala, Emad; Arkkio, Antero2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Effects of pulse-width-modulated supply voltage on eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2009 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Comparative thermal analysis of different rotor types for a high-speed permanent-magnet electrical machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2009 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)ISSN: 1751-8660Multiphysics thermal design of a high-speed permanent-magnet machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2009 in APPLIED THERMAL ENGINEERING (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-4311Attenuation of harmonic rotor vibration in a cage rotor induction machine by a self-bearing force actuator
Laiho, Antti; Orivuori, Juha; Tammi, Kari; Arkkio, Antero; Zenger, Kai2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Electromechanical interaction in eccentric-rotor cage induction machine equipped with a self-bearing force actuator
Laiho, Antti; Tammi, Kari; Orivuori, Juha; Sinervo, Anssi; Zenger, Kai; Arkkio, Antero2009 in VEHICLE SYSTEM DYNAMICS (Taylor and Francis Ltd.)ISSN: 0042-3114A built-in force actuator for active control of lateral rotor vibration in cage induction electrical machines
Laiho, Antti; Tammi, Kari; Burakov, Andrej; Arkkio, Antero; Zenger, Kai2009 in JOURNAL OF SOUND AND VIBRATION (Academic Press Inc.)ISSN: 0022-460XCalculation and analysis of stator end-winding leakage inductance of an induction machine
Lin, Ranran; Arkkio, Antero2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Validation of a time-harmonic numerical model for solving magnetic field in end region of a radial-flux machine
Lin, Ranran; Haavisto, Ari; Arkkio, Antero2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Time-Harmonic Induction-Machine Model Including Hysteresis and Eddy Currents in Steel Laminations
Pippuri, Jenni; Arkkio, Antero2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Modeling magnet length within 2d finite-element analysis of electric machines
Ruoho, Sami; Santa-Nokki, Timo; Kolehmainen, Jere; Arkkio, Antero2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Demagnetization testing for a mixed-grade dove-tail permanent magnet machine
Ruoho, Sami; Kolehmainen, Jere; Ikäheimo, Jouni; Arkkio, Antero2009 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Modifications of construction of rolling rotor switched reluctance motors
Arkkio, Antero; Biernat, Adam; Bucki, Bogdan; Kaminski, Grzegorz; Smak, Andrzej; Staszewski, Pawel2008 in PRZEGLAD ELEKTROTECHNICZNY (Wydawnictwo SIGMA - N O T Sp. z o.o.)Locally coupled magneto-mechanical model of electrical steel
Belahcen, Anouar; Arkkio, Antero2008 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)ISSN: 0332-1649Comprehensive Dynamic Loss Model of Electrical Steel Applied to FE Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2008 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)A Fast Fixed-Point Method for Solving Magnetic Field Problems in Media of Hysteresis
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2008 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2008 in JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (Elsevier Science B.V.)Magnetodynamic vector hysteresis model of ferromagnetic steel laminations
Dlala, Emad; Arkkio, Antero2008 in Physica B (Elsevier Science B.V.)Analysis of the Convergence of the Fixed-Point Method Used for Solving Nonlinear Rotational Magnetic Field Problems
Dlala, Emad; Arkkio, Antero2008 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Time-stepping finite element analysis of eddy currents in the form-wound stator winding of a cage induction motor supplied from a sinusoidal voltage source
Islam, Mohammad Jahirul; Arkkio, Antero2008 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)Air-gap force distribution and vibration pattern of Induction motors under dynamic eccentricity
Jover Rodriguez, Pedro; Belahcen, Anouar; Arkkio, Antero; Laiho, Antti; Antonino-Daviu, Jose2008 in ELECTRICAL ENGINEERING (Springer Verlag)ISSN: 0948-7921A simplified scheme for induction motor condition monitoring
Jover Rodriguez, Pedro; Negrea, Marian; Arkkio, Antero2008 in MECHANICAL SYSTEMS AND SIGNAL PROCESSING (Academic Press Inc.)ISSN: 0888-3270A model-based flexural rotor vibration control in cage induction electrical machines by a built-in force actuator
Laiho, Antti; Tammi, Kari; Zenger, Kai; Arkkio, Antero2008 in ELECTRICAL ENGINEERING (Springer Verlag)ISSN: 0948-79213-D finite element analysis of magnetic forces on stator end-windings of an induction machine
Lin, Ranran; Arkkio, Antero2008 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Identification of Electromagnetic Torque Model for Induction Machines With Numerical Magnetic Field Solution
Repo, Anna-Kaisa; Rasilo, Paavo; Niemenmaa, Asko; Arkkio, Antero2008 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Dynamic electromagnetic torque model and parameter estimation for a deep-bar induction machine
Repo, Anna-Kaisa; Rasilo, Paavo; Arkkio, Antero2008 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)Partial Demagnetization of Permanent Magnets in Electrical Machines Caused by an Inclined Field
Ruoho, Sami; Arkkio, Antero2008 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Low-order parametric force model for eccentric-rotor electrical machine equipped with parallel stator windings and rotor cage
Burakov, Andrej; Arkkio, Antero2007 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)Comparison of the unbalanced magnetic pull mitigation by the parallel paths in the stator and rotor windings
Burakov, Andrej; Arkkio, Antero2007 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Measurement and analysis of hysteresis torque in a high-speed induction machine
Dlala, Emad; Arkkio, Antero2007 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)Locally convergent fixed-point method for solving time-stepping nonlinear field problems
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Effects of the slot harmonics on the unbalanced magnetic pull in an induction motor with an eccentric rotor
Frauman, Pierre; Burakov, Andrej; Arkkio, Antero2007 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Time-harmonic finite-element analysis of eddy currents in the form-wound stator winding of a cage induction motor
Islam, M.Jahirul; Pippuri, Jenni; Perho, Jarmo; Arkkio, Antero2007 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)DWT analysis of numerical and experimental data for the diagnoses of dynamic eccentricity in induction motors
Jover, Pedro; Jose, Antonino-Daviu; Riera, M.; Arkkio, Antero; Roger-Folch, J.2007 in MECHANICAL SYSTEMS AND SIGNAL PROCESSING (Academic Press Inc.)Distributed model for electromechanical interaction in rotordynamics of cage-rotor electrical machines
Laiho, Antti; Holopainen, Timo; Klinge, Paul; Arkkio, Antero2007 in JOURNAL OF SOUND AND VIBRATION (Academic Press Inc.)Numerical impulse response test to identify parametric models for closed-slot deep-bar induction motors
Repo, Anna-Kaisa; Arkkio, Antero2007 in IET ELECTRIC POWER APPLICATIONS (INST ENGINEERING TECHNOLOGY-IET)Detection of Stator Winding Fault in Induction Motor Using Fuzzy Logic
Rodriguez, Jover; Vicente, Pedro; Arkkio, Antero2007 in Applied softcomputing journal, Elsevier (INST ENGINEERING TECHNOLOGY-IET)Comparison of Demagnetization Models for Finite-Element Analysis of Permanent-Magnet Synchronous Machines
Ruoho, Sami; Dlala, Emad; Arkkio, Antero2007 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Low-order parametric force model for eccentric-rotor electrical machine with parallel connections in stator winding
Burakov, Andrej; Arkkio, Antero2006 in IEE Proceedings - Electric Power Applications (Institute of Electrical and Electronics Engineers)Low-order parametric force model for a salient-pole synchronous machine with eccentric rotor
Burakov, Andrej; Arkkio, Antero2006 in ELECTRICAL ENGINEERING (Springer Verlag)Inverted and Forward Preisach Models for Numerical Analysis of Electromagnetic Field Problems
Dlala, Emad; Saitz, Julius; Arkkio, Antero2006 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)A Neuro-fuzzy-based Preisach approach on hysteresis modeling
Dlala, Emad; Arkkio, Antero2006 in PHYSICA B: CONDENSED MATTER (Elsevier Science B.V.)ISSN: 0921-4526Signatures of electrical faults in force distribution and vibration pattern of induction motors
Jover Rodriguez, Pedro; Belahcen, Anouar; Arkkio, Antero2006 in IEE Proceedings - Electric Power Applications (Elsevier Science B.V.)Extraction of circuit parameters from time stepping FEM computation for coupled field-circuit simulation
Kanerva, Sami; Arkkio, Antero2006 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)2D 1D Time-harmonic model for rotating electrical machines
Pippuri, Jenni; Arkkio, Antero2006 in POLLACK PERIODICA - An International Journal for Engineering and Information Sciences (Akademiai Kiado)ISSN: 1788-1994Numerical impulse response test to estimate circuit-model parameters for induction machines
Repo, Anna-Kaisa; Arkkio, Antero2006 in IEE Proceedings - Electric Power Applications (Akademiai Kiado)Performance study of a doubly fed wind-power induction generator under network disturbances
Seman, Slavomir; Niiranen, Jouko; Kanerva, Sami; Arkkio, Antero; Saitz, Julius2006 in IEEE Transaction on Energy Conversion (Akademiai Kiado)Comparison of simulators for variable-speed wind-turbine transient analysis
Seman, Slavomir; Iov, Florin; Niiranen, Jouko; Arkkio, Antero2006 in INTERNATIONAL JOURNAL OF ENERGY RESEARCH (WILEY-BLACKWELL)Ride-through analysis of doubly fed induction wind-power generator under unsymmetrical network disturbance
Seman, Slavomir; Niiranen, Jouko; Arkkio, Antero2006 in IEEE TRANSACTIONS ON POWER SYSTEMS (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)Hysteresis model for finite element analysis of permanent magnet demagnetization in a large synchronous motor under a fault condition
Arkkio, Antero; Rosu, Marius; Saitz, Julius2005 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Hysteresis modeling based on symmetric minor loops
Dlala, Emad; Saitz, Julius; Arkkio, Antero2005 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Unbalanced magnetic pull induced by arbitrary eccentric motion of cage rotor in transient operation.Part 1: Analytical model
Holopainen, Timo; Tenhunen, Asmo; Lantto, Erkki; Arkkio, Antero2005 in ELECTRICAL ENGINEERING (Springer Verlag)Electromechanical interaction in rotordynamics of cage induction motors
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2005 in JOURNAL OF SOUND AND VIBRATION (Academic Press Inc.)Unbalanced magnetic pull induced by arbitrary eccentric motion of cage rotor in transient operation.Part 2: Verification and numerical parameter estimation
Holopainen, Timo; Tenhunen, Asmo; Lantto, Erkki; Arkkio, Antero2005 in ELECTRICAL ENGINEERING (Springer Verlag)Thermal analysis of Azipod permanent magnet propulsion motor
Jokinen, Tapani; Arkkio, Antero; Negrea, Marian; Waltzer, Ingmar2005 in International Journal of Electrical Engineering in Transportation (Springer Verlag)Inductance model for coupling finite element analysis with circuit simulation
Kanerva, Sami; Seman, Slavomir; Arkkio, Antero2005 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Coupling pairwise support vector machines for fault classification
Pöyhönen, S.; Arkkio, A.; Jover, P.; Hyötyniemi, H.2005 in CONTROL ENGINEERING PRACTICE (Elsevier Limited)ISSN: 0967-0661Numerical identification of electromagnetic force parameters for linearized rotordynamic model of cage induction motors
Holopainen, Timo; Tenhunen, Asmo; Lantto, Erkki; Arkkio, Antero2004 in Journal of Vibration and Acoustic (Elsevier Limited)Effects of saturation on the forces of induction motors with whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2004 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Pöyhönen, S.; Negrea, M.; Jover, P.; Arkkio, A.; Hyötyniemi, H.2003 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)Spatial linearity of an unbalanced magnetic pull in induction motors during eccentric rotor motions
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)Impulse method to calculate the frequency response of the electromagnetic forces on whirling cage rotors
Tenhunen, Asmo; Holopainen, Timo; Arkkio, A.2003 in IEE Proceedings - Electric Power Applications (Emerald Group Publishing Ltd.)Electromagnetic forces of the cage rotor in conical whirling motion
Tenhunen, Asmo; Benedetti, Tommaso; Holopainen, Timo; Arkkio, Antero2003 in IEE Proceedings - Electric Power Applications (Emerald Group Publishing Ltd.)Modelling of induction machines with skewed rotor slots
Tenhunen, A.; Arkkio, A.2001 in IEE Proceedings - Electric Power Applications (Emerald Group Publishing Ltd.)Electromagnetic force on a whirling cage rotor
Arkkio, Antero; Antila, M.; Pokki, K.; Simon, A.; Lantto, E.2000 in IEE Proceedings - Electric Power Applications (Emerald Group Publishing Ltd.)A Comparative Analysis of a Permanent Magnet Synchronous Motor Design
Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.2000 in REVUE ROUMAINE DES SCIENCES TECHNIQUES-SERIE ELECTROTECHNIQUE ET ENERGETIQUE (Editions de l'Academie Republique Populaire)Active Magnetic Bearing for High-Speed Electric Machine
Antila, Matti; Arkkio, Antero; Jokinen, T.1999 in Electromotion (Editions de l'Academie Republique Populaire)Consideration of eddy currents in multi-conductor windings using the finite element method and the elimination of inner nodes
Szúcs, A.; Arkkio, A.1999 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)Contribution to the finite element analysis of eddy-currents in multi-conductor windings surrounded by magnetically non-linear media
Szücs, Á.; Arkkio, A.; Jokinen, T.1999 in COMPEL: THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING (Emerald Group Publishing Ltd.)Determination of forces and linearized parameters of radial active magnetic bearings by finite element technique
Antila, M.; Lantto, E.; Arkkio, A.1998 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)A 50 kW Homopolar Motor with superconducting field windings
Arkkio, A.; Berglund, P.; Eriksson, J. T.; Luomi, J.; Savelainen, M.1981 in IEEE TRANSACTIONS ON MAGNETICS (Institute of Electrical and Electronics Engineers)ISSN: 0018-9464Book section, Chapters in research booksModelling the sources and transmission of acoustic noise in electrical machines -The chain from the electromagnetic excitation to sound radiation
Arkkio, Antero; Belahcen, Anouar; Klinge, P.2001 Conference proceedingsModelling the effect of multiaxial stress on magnetic hysteresis of electrical steel sheets A comparison
Aydin, U.; Rasilo, P.; Martin, F.; Singh, D.; Daniel, L.; Belahcen, A.; Kouhia, R.; Arkkio, A.2017 ISBN: 9781509010325Simulation of an induction motor's rotor after connection
Climente-Alarcon, Vicente; Sundaria, Ravi; Panchal, Jay; Arkkio, Antero2017 ISBN: 9781509010325Higher-order finite element modeling of material degradation due to cutting
Sundaria, Ravi; Lehikoinen, Antti; Hannukainen, Antti; Arkkio, Antero2017 ISBN: 9781509042814Two-axis models for torsional vibration of synchronous machines
Arkkio, Antero; Holopainen, Timo P.2016 ISBN: 9781509025381Space-vector models for torsional vibration of cage induction motors
Arkkio, Antero; Holopainen, Timo P.2016 ISBN: 9781479988044Analytical investigation of DC link overvoltages during freewheeling for inverters in EV
Chandran, Aravind Ramesh ; Hennen, Martin; Arkkio, Antero2016 ISBN: 9781509004034Current variation in a rotor bar during transients due to a hot spot
Climente-Alarcon, Vicente; Sathyan, Sabin; Arkkio, Antero; Antonino-Daviu, Jose A.2016 ISBN: 9781479917624Combined model for simulating the effect of a heavy transient on a damaged rotor cage
Climente-Alarcon, Vicente; Nair, Devi; Sundaria, Ravi; Antonino-Daviu, Jose A.; Arkkio, Antero2016 ISBN: 9781509025381Improved model for the prediction of core loss in finite element analysis of electric machines
Dlala, Emad; Solveson, Mark; Stanton, Scott; Arkkio, Antero2016 ISBN: 978-1-4799-7941-7A multi-label classification approach for the detection of broken bars and mixed eccentricity faults using the start-up transient
Georgoulas, George; Climente-Alarcon, Vicente; Antonino-Daviu, Jose A.; Stylios, Chrysostomos D.; Arkkio, Antero; Nikolakopoulos, George2016 in IEEE International Conference on Industrial Informatics (Institute of Electrical and Electronics Engineers Inc.)ISBN: 9781509028702ISSN: 1935-4576Identification of magnetic properties for cutting edge of electrical steel sheets
Holopainen, Timo P.; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 9781509025381Identification of magnetic model parameters for cutting edge of electrical steel sheets
Holopainen, Timo; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 978-1-5090-2537-4 Simulation Model of Electrical Steel Piercing
Laakso, Sampsa; Väänänen, Arijussi; Bossuyt, Sven; Arkkio, Antero2016 in Procedia Manufacturing (Elsevier B.V.)ISSN: 2351-9789Reduced basis finite element modelling of electrical machines with multi-conductor windings
Lehikoinen, Antti; Arkkio, Antero; Belahcen, Anouar2016 ISBN: 9781509025381Inverse thermal modelling to determine power losses in induction motor
Nair, Devi Geetha; Arkkio, Antero2016 ISBN: 9781509010325Coupled analytical and 3D numerical thermal analysis of a TEFC induction motor
Nair, Devi Geetha; Jokinen, Tapani; Arkkio, Antero2016 ISBN: 9781479988044Multiaxial magneto-mechanical modelling of electrical machines with hysteresis
Rasilo, Paavo; Aydin, Ugur; Singh, Deepak; Martin, Floran; Kouhia, Reijo; Belahcen, Anouar; Arkkio, Antero2016 ISBN: 978-1-78561-188-9Analysis of iron losses on the cutting edges of induction motor core laminations
Rasilo, Paavo; Aydin, Ugur; Holopainen, Timo P.; Arkkio, Antero2016 ISBN: 9781509025381Permanent magnet assisted synchronous reluctance motor in hoist application
Salomäki, Janne; Repo, Anna-Kaisa; Uusiniitty, Toni; Arkkio, Antero2016 ISBN: 9781509020676Efficiency map prediction of flux switching machine
Shah, Sahas Bikram; Arkkio, Antero2016 ISBN: 9781479988044Eddy current loss calculation in burred laminated cores
Shah, Sahas Bikram; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 9781509010325Power balance approach to study electromagnetic damping in rotor dynamics
Silwal, Bishal; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 9781509010325Measurement of torque harmonics of a cage induction machine under rotor eccentricity
Silwal, B.; Rasilo, P.; Haavisto, Ari; Belahcen, A.; Arkkio, A.2016 ISBN: 97814799880443-D Eddy Current Modelling of Steel Laminations to Analyze Edge Effects
Sundaria, Ravi; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2016 ISBN: 978-83-62712-04-5Automation of the startup transient analysis of induction motors using a predictive stage
Climente-Alarcon, Vicente; Arkkio, Antero; Antonino-Daviu, Jose A.2015 ISBN: 978-1-4799-6649-3Diagnosis of induction machines under varying speed operation by principal slot harmonic tracking
Climente Alarcon, Vicente; Antonino-Daviu, Jose Alfonso; Haavisto, Ari; Arkkio, Antero2014 ISBN: 978-1-4799-4389-0Evolution of high order harmonics during a bar breakage with compensation
Climente Alarcon, Vicente; Antonino-Daviu, Jose Alfonso; Haavisto, Ari; Arkkio, Antero2014 ISBN: 978-1-4799-4389-0Evolution of high order fault harmonics during a bar breakage with compensation
Climente-Alarcon, V.; Antonino-Daviu, J. A.; Haavisto, A.; Arkkio, A.2014 ISBN: 9781479943890Electrical fault diagnosis for an induction motor using an electromechanical FE model
Farzam Far, Mehrnaz; Arkkio, Antero; Roivainen, Janne2014 ISBN: 978-1-4799-4775-1Form-wound stator winding for high-speed induction motors
Khang, Huynh; Saari, Juha; Arkkio, Antero2014 ISBN: 978-1-4799-4775-1Segregation of Iron Losses from Rotational Field Measurements and Application to Electrical Machine
Belahcen, Anouar; Rasilo, Paavo; Arkkio, Antero2013 Combined FE and two dimensional spectral analysis of broken cage faults in induction motors
Martinez, Javier; Belahcen, Anouar; Arkkio, Antero2013 ISBN: 978-1-4799-0223-1An accurate and fast technique for correcting spectral leakage in motor diagnosis
Martinez, Javier; Philipp, Francois; Glesner, Manfred; Arkkio, Antero2013 ISBN: 978-1-4799-0025-1Vector Generalization of Uniaxial Models for Magnetomechanical Hysteresis and Magnetostriction
Rasilo, Paavo; Singh, Deepak; Kouhia, Reijo; Belahcen, Anouar; Arkkio, Antero2013 Evaluation and comparison of different numerical computation methods for the electromagnetic torque in electrical machines
Silwal, Bishal; Rasilo, Paavo; Perkkiö, Lauri; Hannukainen, Antti; Eirola, Timo; Arkkio, Antero2013 ISBN: 978-1-4799-1446-3Proper finite-element discretization for torque computation of cage induction motors
Arkkio, Antero; Hannukainen, Antti2012 ISBN: 978-1-4673-1300-1Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines
Belahcen, Anouar; Fonteyn, Katarzyna; Kouhia, Reijo; Rasilo, Paavo; Arkkio, Antero2012 ISBN: 978-3-85125-258-3Active control method for attenuation of torque vibrations in AC induction motor
Kiviluoto, Sami; Hyvämäki, Tapani; Zenger, Kai; Kärkkäinen, Ilari; Arkkio, Antero2012 ISBN: 978-609-459-079-5A smart wireless sensor for the diagnosis of broken bars in induction motors
Philipp, F.; Martinez, Javier; Glesner, M.; Arkkio, Antero2012 ISBN: 978-1-4673-2774-9Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed Synchronous Motors
Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2012 ISBN: 978-1-4673-0141-1Unipolar flux in bearingless two-pole machine
Sinero, Anssi; Jokela, Tommi; Arkkio, Antero2012 ISBN: 978-1-4673-0141-1Modeling two-pole cage induction machine equipped with embedded force actuator
Sinervo, Anssi; Arkkio, Antero2012 Controlling rotor vibrations of two-pole induction machine under loaded operation
Sinervo, Anssi; Arkkio, Antero2012 ISBN: 978-609-459-079-5Calorimetric Measurement of Stator Core Losses
Singh, Deepak; Arkkio, Antero2012 Synchronous torques of a cage induction motor from time-discretized finite element analysis
Arkkio, Antero2011 Numerical Investigation of the Effects of Loading and Slot Harmonics on the Core Losses of Induction Machines
Dlala, Emad; Bottauscio, Oriano; Chiampi, Mario; Zucca, Mauro; Belahcen, Anouar; Arkkio, Antero2011 A negative selection algorithm-based motor fault detection scheme
Gao, X.Z.; Wang, X.; Ovaska, S.J.; Arkkio, A.; Zenger, K.2011 Eddy-current loss modeling for induction motor with a form-wound stator winding
Huynh Van, Khang; Arkkio, Antero2011 ISBN: 978-1-41839-495-8Power balance for verifying torque computation within time-discretized finite-element analysis
Arkkio, Antero; Hannukainen, Antti; Niemenmaa, Asko2010 ISBN: 978-83-921340-8-4Origin of parasitic time-periodic torques and forces in electrical machines
Arkkio, Antero; Zenger, Kai2010 Electromechanical interaction in a synchronous reluctance machine
Arkkio, Antero; Nepal, Basanta Raj; Sinervo, Anssi2010 ISBN: 978-1-4244-7919-1Permanent Magnets Models and Losses in 2D FEM Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2010 Use of high order harmonics for diagnosis of simultaneous faults via Wigner-Ville distributions
Climente-Alarcon, Vicente; Antonino-Daviu, Jose; Riera-Guasp, Martin; Jover-Rodriguez, Pedro; Arkkio, Antero2010 in IEEE Industrial Electronics Society (IEEE Industrial Electronics Society)ISBN: 978-1-4244-5226-2ISSN: 1553-572XGeneral formulation for the Newton-Raphson method and the fixed-point method in finite-element programs
Dlala, Emad; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Contribution of Maxwell stress in air on the deformations of induction machines
Fonteyn, Katarzyna; Belahcen, Anouar; Rasilo, Paavo; Kouhia, Reijo; Arkkio, Antero2010 Simulated results and experimental verification of a novel magneto-mechanical coupled method
Fonteyn, Katarzyna; Belahcen, Anouar; Rasilo, Paavo; Kouhia, Reijo; Arkkio, Antero2010 A hybrid PBIL-based harmony search method with application in wind generator optimization
Gao, Xiao-Zhi; Jokinen, Tapani; Wang, Xiaolei; Arkkio, Antero; Ovaska, Seppo2010 A new harmony search method in optimal wind generator design
Gao, Xiao-Zhi; Jokinen, Tapani; Wang, Xiaolei; Ovaska, Seppo; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Resistive loss identification of an inverter-fed deep-bar induction motor
Huynh Van, Khang; Repo, Anna-Kaisa; Arkkio, Antero2010 ISBN: 978-1-4244-7919-1Thermal analysis of a high-speed PM machine using numerical and thermal-network method
Kolondzovski, Zlatko; Sallinen, Petri; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Harmonic torque suppression by manual voltage injection
Kärkkäinen, Ilari; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Circuit models for predicting core losses in the stator and rotor of a caged induction machine with sinusoidal supplies
Ladin, Omar; Dlala, Emad; Arkkio, Antero2010 Modeling the effect of inverter supply on eddy-current losses in synchronous machines
Rasilo, Paavo; Arkkio, Antero2010 ISBN: 978-1-4244-7919-1Application of TFD tools for the tracing of eccentricity-related components in induction machines
Antonino-Daviu, Jose; Climente-Alarcon, V.; Pons-Llinares, J.; Pineda-Sanchez, M.; Jover-Rodriguez, Pedro; Arkkio, Antero2009 ISBN: 978-1-4244-4648-3ISSN: 1553-572XDiagnosis of stator short-circuits through Wigner-Ville transient-based analysis
Climente-Alarcon, V.; Antonino-Daviu, Jose; Riera-Guasp, Martin; Puche, Ruben; Escobar-Moreira, L.; Wiener, N.; Jover-Rodriguez, Pedro; Arkkio, Antero2009 ISBN: 978-1-4244-4648-3ISSN: 1553-572XNovel Mesurement Device for the Investigation of Magnetostriction in Electrical Machinery.
Fonteyn, Katarzyna; Pyhäranta, Eero; Belahcen, Anouar; Rasilo, Paavo; Arkkio, Antero2009 Identification of Rotor Resistive Loss Models for Cage Induction Motors
Huynh Van, Khang; Repo, Anna-Kaisa; Arkkio, Antero2009 ISBN: 978-9985-9089-1-4Finite-element discretisation for analysing eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2009 Harmonic rotor vibration with control in a cage induction machine
Laiho, Antero; Tammi, Kari; Arkkio, Antero2009 Parameter estimation of synchronous machines by using the differential evolution algorithm
Mäkela, Olli; Repo, Anna-Kaisa; Arkkio, Antero2009 Suppression of rotor vibrations of an electric machine at the critical speed by optimal state feedback controller
Orivuori, Juha; Sinervo, Anssi; Zenger, Kai; Arkkio, Antero2009 ISBN: 978-963-311-369-1Torque pulsations and magnetic field energy in permanent-magnet synchronous machines
Repo, Anna-Kaisa; Petsa, Stavroula; Arkkio, Antero2009 ISBN: 978-9985-9089-1-4On convergence problems of adaptive fir filter with lms algorithm
Tammi, Kari; Laiho, Antti; Lantto, Erkki; Zenger, Kai; Arkkio, Antero2009 ISBN: 978-83-60716-71-7Complementary diagnosis of rotor asymmetries through the tracing of the right sideband component in the stator startup current
Antonino-Daviu, Jose; Jover, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Pineda-Sánchez, M.2008 ISBN: 978-1-4244-1736-0Mixed fault diagnosis in induction machines with stator parallel branches through the application of the DWT to the startup current
Antonino-Daviu, Jose; Jover, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose2008 ISBN: 978-1-4244-1736-0Origin of unbalanced-magnetic-pull components in electrical machines
Arkkio, Antero; Holopainen, Timo2008 Electromechanical Interaction in Rotordynamics of Electrical Machines an Overview
Holopainen, Timo; Arkkio, Antero2008 ISBN: 978-1-84334-458-2Optimum Supply for an Inverter-Fed Cage Induction Motor at Different Load Conditions
Islam, M.Jahirul; Arkkio, Antero2008 Self-bearing cage induction machine actuator in active control of rotor vibrations
Laiho, Antti; Tammi, Kari; Orivuori, Juha; Zenger, Kai; Sinervo, Anssi; Arkkio, Antero2008 Electromechanical interaction in eccentric-rotor cage induction machine equipped with a self-bearing force actuator
Laiho, Antti; Tammi, Kari; Orivuori, Juha; Sinervo, Anssi; Zenger, Kai; Arkkio, Antero2008 Calculation of Stator End-Winding Reactance of an Induction Machine Based on Magnetic Energy by 3-D Finite Element Analysis
Lin, Ranran; Arkkio, Antero2008 3-D Finite Element Analysis of Magnetic Forces Exerted on Stator End-Winding of an Induction Motor
Lin, Ranran; Arkkio, Antero2008 Parameter estimation for synchronous machines using numerical pulse test within finite element analysis
Mäkelä, Olli; Repo, Anna-Kaisa; Arkkio, Antero2008 ISBN: 978-1-4244-1736-0Magnetodynamic vector hysteresis model of ferromagnetic steel laminations
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Active control of radial rotor vibrations in cage induction electrical machines by a built-in force actuator
Laiho, Antti; Burakov, Andrej; Tammi, Kari; Zenger, Kai; Arkkio, Antero2007 Physical modeling, analysis and active model-based control of rotor vibrations in electric motors
Orivuori, Juha; Altowati, Ali; Hrbcek, Jozef; Zenger, Kai; Arkkio, Antero; Laiho, Antti; Tammi, Kari2007 ISBN: 978-951-22-8913-4ISSN: 1455-4046Parameter estimation for induction motors to study the effects of voltage, frequency and slip
Repo, Anna-Kaisa; Hinkkanen, Marko; Arkkio, Antero2007 Mixed-Grade Pole Design for Permanent Magnet Synchronous Machines
Ruoho, Sami; Arkkio, Antero2007 Simulation as a means to test advanced control algorithms in suppressing rotor vibrations in electric machines
Zenger, Kai; Orivuori, Juha; Sinervo, Anssi; Altowati, Ali; Hrbcek, Jozef; Arkkio, Antero; Laiho, Antti; Tammi, Kari2007 ISBN: 978-3-901608-32-2Sähkömoottorin roottorivärähtelyjen aktiivivaimennus
Zenger, Kai; Orivuori, Juha; Laiho, Antti; Tammi, Kari; Burakov, Andrej; Arkkio, Antero2007 ISBN: 978-952-5183-33-7ISSN: 1455-6502Validation of electromechanical rotor model for cage induction motors with parallel paths in stator windings
Holopainen, Timo; Aatola, Seppo; Burakov, Andrej; Arkkio, Antero2006 ISBN: 3-200-00689-7Effects of electromechanical faults on the airgap force distribution of induction motors
Jover Rodriguez, Pedro Vicente; Belahcen, Anouar; Arkkio, Antero; Antonino-Daviu, José2006 Numerical Analysis of Eddy-Current Losses in the Rotor of a High-Speed Synchronous Machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2006 Parameter estimation of induction machines using the numerical impulse method
Repo, Anna-Kaisa; Arkkio, Antero2006 Estimating the circuit models for a deep-bar induction motor using time harmonic finite element analysis
Repo, Anna-Kaisa; Niemenmaa, Asko; Arkkio, Antero2006 Induction and Permanent-Magnet Synchronous Machines for High-Speed Applications
Arkkio, Antero; Jokinen, Tapani; Lantto, Erkki2005 Applying genetic algorithms to identify the parameters of a low-order force model for a salient-pole synchronous machine with eccentric rotor
Burakov, Andrej; Tenhunen, Asmo; Arkkio, Antero2005 A general scheme for induction motor condition monitoring
Jover, Pedro; Negrea, Marian; Arkkio, Antero2005 Electromagnetic Flux-based Condition Monitoring for Electrical Machines
Negrea, Marian; Jover, Pedro; Arkkio, Antero2005 ISBN: 0-7803-9123-XAdvanced Modeling of Doubly Fed Induction Generator Wind Turbine under Network Disturbance
Seman, Slavomir; Iov, F.; Niiranen, J.; Arkkio, Antero2005 Extraction of Circuit Parameters from Time Stepping FEM Computation for Coupled Field-Circuit Simulation
Kanerva, Sami; Arkkio, Antero2004 Inductance Model for Coupling Finite Element Analysis with Circuit Simulation
Kanerva, Sami; Arkkio, Antero; Seman, Slavomir2004 A comparative investigation on the reliability and accuracy of different diagnostic media when attempting to identify specific faults in an induction motor
Negrea, Marian; Jover, Pedro; Arkkio, Antero2004 ISBN: 88-89389-00-1Vizualising the results of numerical magnetic field analysis of electric machines, A147
Repo, Anna-Kaisa; Lehtonen, Heidi-Maria; Arkkio, Antero; Niemenmaa, Asko2004 Mass reduction of an AC inductor
Saitz, Julius; Arkkio, Antero2004 Transient Analysis of Doubly Fed Power Induction Generator Using Coupled Field-Circuit Model
Seman, Slavomir; Kanerva, Sami; Niiranen, Jouko; Arkkio, Antero2004 Analysis of a 1.7 MVA Doubly Fed Wind-Power Induction Generator during Power Systems Disturbances Power Systems Disturbances
Seman, Slavomir; Niiranen, Jouko; Kanerva, Sami; Arkkio, Antero2004 Analysis of thermal fields in electrical machines using finite element method
Al-Towati, Ali; Arkkio, Antero2003 Application of Low Order Parametric Force Model to Describe the Forces in Eccentric Rotor Synchronous Machine
Burakovas, Andrejus; Tenhunen, Asmo; Arkkio, Antero2003 Numerical identification of electromagnetic force parameters for linearized rotordynamic model of cage induction motors Numerical identification of electromagnetic force parameters for linearized roto
Holopainen, Timo; Tenhunen, Asmo; Lantto, Erkki; Arkkio, Antero2003 Induction Motor Stator Fault Detection Using Fuzzy Logic
Jover, Pedro; Arkkio, Antero2003 Coupling pairwise support vector machines for fault classification
Pöyhönen, Sanna; Arkkio, Antero; Hyötyniemi, Heikki2003 Dynamic Model of Cage Induction Motor Considering Saturation and Skin Effect
Seman, Slavomir; Saitz, Julius; Arkkio, Antero2003 Effects of equalising currents on electromagnetic forces of whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 Electromagnetic circulatory forces and rotordynamic instability in electric machines
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2002 Modeling, Simulation and Signal Processing with Application to Electric Machine Fault Diagnostics and Condition Monitoring
Negrea, Marian; Pöyhönen, Sanna; Arkkio, Antero; Jover, Pedro; Hyötyniemi, Heikki2002 Fault diagnostics of an electrical machine with multiple support vector classifiers
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.; Koivo, H.2002 Support vector classification for fault diagnostics of an electrical machine
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.; Koivo, H.2002 An Induction motor transient model in simulink including saturation and skin effect in rotor bars
Seman, Slavomir; Arkkio, Antero2002 Electromagnetic damping of stator vibrations in a cage induction motor
Arkkio, A.2001 Thermal analysis of a permanent synchronous motor
Negrea, Marian; Arkkio, Antero; Jokinen, Tapani; Hakuli, Miikka2001 Advanced finite element analysis with macro elements, replacing large meshes of eddy-current carrying windings in electromagnetic field computation
Szücs, Áron; Arkkio, Antero; Jokinen, Tapani2001 An electromechanical model for analysing transients in diesel-driven synchronous generators.
Arkkio, A.; Westerlund, J.2000 Local force calculation for vibration and noise analysis of a synchronous generator
Belahcen, A.; Arkkio, A.2000 Experience of an analysis program for generators and shaft systems at an energy, engineering and service company
Kerttula, J.; Lindgren, O.; Ahtiainen, J.; Orivuori, S.; Arkkio, A.2000 Electromagnetic forces caused by cage induction motor
Lantto, E.; Arkkio, A.; Antila, M.; Pokki, K.; Simon, A.2000 A study of measurement methods of the no-load losses in cage-induction motors
Negrea, M.; Arkkio, A.; Niemenmaa, A.2000 A compared analysis on no-load airgap magnetic field distribution in large output power permanent magnet synchronous motor
Rosu, Marius; Arkkio, A.; Jokinen, T.2000 Finite element modeling of the magnetic field in asynchronous motors taking ferromagnetic hysteresis into account
Saitz, J.; Arkkio, A.; Negrea, A.2000 Advanced utilisation of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines.
Szücs, Áron; Arkkio, A.; Jokinen, T.2000 Modeling of eddy currents in the stator winding of an asynchronous machine using macro elements
Szücs, Áron; Arkkio, A.; Jokinen, T.2000 Representation of skew in time-stepped 2D finite element model of induction machines using a multi-slice technique
Tenhunen, A.; Arkkio, A.2000 Active Magnetic Bearing for High-Speed Electric Machines
Antila, M.; Arkkio, A.; Lantto, E.; Jokinen, T.1999 Finite element analysis to assist condition monitoring of hydrogenerators
Arkkio, A.; Ahtiainen, J.; Lindgren, O.1999 Finite element analysis for hydrogenerators
Arkkio, A.; Ahtiainen, J.; Lindgren, O.1999 Vibration Model for Diesel-Driven Synchronous Generators
Arkkio, Antero; Westerlund, J.; Torsional, J.1999 Radial Forces Calculation in a Synchronous Generator for Noise Analysis
Belahcen, A.; Arkkio, A.; Klinge, P.; Linjama, J.; Voutilainen, V.; Westerlund, J.1999 High-Speed AC Motors
Jokinen, T.; Arkkio, A.1999 Comparison of a partly laminated squirrel cage rotor and a copper coated solid steel rotor for a 50 kW high-speed compressor
Lähteenmäki, Jussi; Arkkio, A.; Soitu, V.; Saari, J.1999 No-load Losses in Cage Induction Motors
Negrea, M.; Arkkio, A.; Niemenmaa, A.; Jokinen, Tapani; Saitz, J.1999 Analysis of the electrical shift angle influence over a variable speed two-phase induction drive
Popescu, M.; Jokinen, T.; Lampola, P.; Arkkio, A.; Demeter, E.; Navrapescu, V.1999 "Demagnetisation State of Permanent Magnets in Large Output Power Permanrent Magnet Synchronous Motor
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1999 The Effect of Optimised Stator Slots and Rotor Configuration on Torque and Electromagnetic Losses in Permanent Magnet Synchronous Motor for Ship Propulsion Drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1999 Prediction of Airgap Magnetic Field Distribution in Large Output Power Permanent Magnet Synchronous Motor
Rosu, Marius; Arkkio, Antero; Jokinen, T.; Mantere, J.; Westerlund, J.1999 The Influence of Optimised Stator Geometry and Rotor Configuration on Motor Characteristics in Permanent Magnet Synchronous Motor for Ship Propulsion Drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1999 Core loss estimation of a cage induction motor using the vector Preisach hysteresis model incorporated in finite element analysis
Saitz, J.; Arkkio, A.1999 Effects of rotor slot opening modification on acoustic noise from induction machines
Tenhunen, A.; Arkkio, A.1999 Effects of asymmetric rotor slot pitch on acoustic noise from induction machines
Tenhunen, A.; Arkkio, A.; Belahcen, A.1999 Hysteresis torque in a cage induction motor
Arkkio, A.; Niemenmaa, A.; Saitz, J.1998 Efficient magnetic-thermal coupled simulation of electrical machines using a double combined FEM-circuit approach
Driesen, J.; Belmans, R.; Hameyer, K.; Arkkio, A.; Jokinen, T.1998 Rotary transformer for the excitation of synchronous machines
Karttunen, S.; Arkkio, A.; Tellinen, J.; Mantere, J.; Varis, J.; Westerlund, J.1998 Development of an inverter fed two-phase variable speed induction motor drive
Popescu, M.; Arkkio, A.; Micu, D.; Demeter, E.; Navrapescu, V.1998 Permanent magnet synchronous motor for ship propulsion drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Nahkuri, V.; Mantere, J.; Westerlund, J.1998 Permanent magnet synchronous motor for ship propulsion drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1998 Permanent magnet synchronous motor for ship propulsion drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.W.1998 Contribution to the finite element analysis of eddy-currents ain multi-conductor windings surrounded by magnetically non-linear media
Szücs, Á.; Arkkio, A.; Jokinen, T.1998 High speed AC motors
Jokinen, T.; Arkkio, A.1997 Validity of conventional and modern methods of no-load loss calculation in asynchronous machines - statistic approach
Kytömäki, R.; Arkkio, A.; Niemenmaa, A.; Suontausta, A.1997 Variable speed induction motor drive for household refrigerator compressor
Rasmussen, C.; Ritchie, E.; Arkkio, A.1997 Losses in inverter-fed cage induction motors
Arkkio, A.1996 Unbalanced magnetic pull in cage induction motors dynamic and static eccentricity
Arkkio, A.1996 Study of electrical machines, using a new interactive finite element preprocessor
Arkkio, A.; Palko, S.; Saitz, J.; Yatchev, I.1996 High speed AC motors
Jokinen, T.; Arkkio, A.1996 High-speed AC machines
Jokinen, T.; Arkkio, A.1996 Calculation of hysteresis losses by the Preisach model within finite element analysis
Saitz, J.; Arkkio, A.; Szucs, A.1996 Calculation of hysteresis losses by the Preisach model within finite element analysis
Saitz, J.; Arkkio, A.; Szucs, A.1996 Investigation of electrical machines by using a new interactive finite element preprocessorin unix x-window environment
Szucs, A.; Arkkio, A.; Palko, S.; Saitz, J.1996 Unbalanced magnetic pull in a four-pole induction motor with an odd number of rotor slots
Arkkio, A.1995 Design and analysis of electrical motors for a hybrid electric vehicle
Luomi, Jorma; Hellsing, Johan; Lindström, Joachim; Arkkio, Antero1995 Cooling of a 100 000 RPM electrical motor
Saari, J.; Arkkio, A.1995 Unbalanced magnetic pull in a high-speed induction motor with an eccentric ortor
Arkkio, Antero; Lindgren, O.1994 Finite element analysis of the magnetic forces acting on an eccentric rotor of a high-speed induction motor
Arkkio, Antero; Lindgren, O.1994 Losses in high-speed asynchronous motors
Saari, Juha; Arkkio, A.1994 Rotor-slot design for inverter-fed cage induction motors
Arkkio, A.1992 On the choise of the number of rotor slots for inverter-fed cage induction motors
Arkkio, A.1992 Estimation of losses in cage induction motors using finite element techniques
Niemenmaa, A.; Arkkio, A.1992 Non-refereed scientific articles
Unrefereed conference proceedingsFinite Element Modelling of Additional Losses Due to Galvanic Contacts on Edges of Lamination Stacks
Bikram Shah, Sahas; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2013 Effect of Manufacturing on Stator Core Losses
Singh, Deepak; Belahcen, Anouar; Arkkio, Antero2013 Scientific books (monographs)
Book (editor)Suurnopeustekniikka - High Speed Technology in Finland
Larjola, Jaakko; Arkkio, Antero; Pyrhönen, Juha2010 ISBN: 978-952-214-949-7Publications intended for professional communities
Article in professional journalNumerical analysis of eddy-current losses in the rotor of a high-speed synchronous machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2007 in PRZEGLAD ELEKTROTECHNICZNY (Wydawnictwo SIGMA - N O T Sp. z o.o.)Properties of Electrical Steel Sheets Under Strong Mechanical Stress
Fonteyn, Katarzyna; Belahcen, Anouar; Arkkio, Antero2006 in An International Journal for Engineering and Information Sciences (Wydawnictwo SIGMA - N O T Sp. z o.o.)Article in professional conference proceedingsModels of magnetic anisotropy for non oriented steel sheets dedicated to finite element method
Martin, Floran; Singh, Deepak; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2015 Effect of Static Stress on Iron Loss in a Synchronous Reluctance Machine
Singh, Deepak; Rasilo, Paavo; Martin, Floran; Belahcen, Anouar; Arkkio, Antero2015 Published development or research reportPower limits of high-speed permanent-magnet electrical machines for compressor applications
Kolondzovski, Zlatko; Arkkio, Antero; Larjola, Jaakko; Sallinen, Petri2010 Finite-element analysis for a rolling-rotor electrical machine
Arkkio, Antero; Biernat, Adam; Bucki, Bogdan; Kaminski, Gregorz; Niemenmaa, Asko; Smak, Andrzej; Staszewski, Pawel2009 Dependence of hysteresis and eddy-current losses on the excitation frequency and the analysis of losses in inverter-fed electric machines
Dlala, Emad; Belahcen, Anouar; Pippuri, Jenni; Arkkio, Antero2009 Unified Scheme for Implementing the Fixed-Point and Newton-Raphson Methods in Finite-Element Programs of Electromagnetic Field Problems
Dlala, Emad; Arkkio, Antero2009 On the Importance of Incorporating Iron Losses in the Magnetic Field Solution of Electrical Machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2009 FEM for directly coupled magneto-mechanical phenomena in electrical machinesKatarzyna
Fonteyn, Katarzyna; Belahcen, Anouar; Kouhia, Reijo; Arkkio, Antero2009 Eddy-current Losses and Temperature Rise in the Form-wound Stator Winding of an Inverter-fed Cage Induction Motor
Huynh Van, Khang; Islam, M.Jahirul; Repo, Anna-Kaisa; Arkkio, Antero2009 Finite-element analysis of eddy currents in the form-wound stator and rotor winding of a doubly-fed induction generator
Islam, M.Jahirul; Arkkio, Antero2009 Axial Magnetic Flux and Eddy-Current Loss in Core Ends of a Large Induction Machine
Lin, Ranran; Haavisto, Ari; Arkkio, Antero2009 Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Niemenmaa, Asko; Salmia, Lauri; Arkkio, Antero; Saari, Juha2009 Inclusion of Eddy Currents in Laminations in Two-Dimensional Finite Element Analysis
Pippuri, Jenni; Belahcen, Anouar; Dlala, Emad; Arkkio, Antero2009 A Mesh-Free Model of Eddy-Current Losses for 2D Analysis of Ferromagnetic Laminations
Rasilo, Paavo; Arkkio, Antero2009 Finite-element discretiztion for analyzing eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2008 Challenges in the segregation of losses in cage induction machines
Pippuri, Jenni; Arkkio, Antero2008 Active Magnetic Bearings
Arkkio, Antero; Lantto, Erkki; Tommila, Ville2007 Comprehensive Dynamic Loss-Model of Electrical Steel Applied to FE Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2007 Mitigation of UMP Components by the Parallel Stator Windings in Eccentric-rotor Electrical Machines
Burakov, Andrej; Arkkio, Antero2007 A Fast Fixed-Point Method for Solving Nonlinear Field Problems in Time-Stepping Analysis
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Vibrations of Electrical Machines
Holopainen, Timo; Roivainen, Janne; Nordmann, Rainer; Arkkio, Antero2007 Identification of electromagnetic torque model for induction machines with numerical magnetic field solution
Repo, Anna-Kaisa; Rasilo, Paavo; Niemenmaa, Asko; Arkkio, Antero2007 Laboratory of Electromechanics, Annual Report 2006
Schröder, Marika; Arkkio, Antero2007 Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines
Antonino-Daviu, Jose; Jover Rodríguez, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose2006 Coupled Field-Circuit Problems in Electric Power Engineering
Arkkio, Antero; Kanerva, Sami; Repo, Anna-Kaisa; Szucs, Aron2006 Local Magneto-Mechanical Coupling in Electrical Machines
Belahcen, Anouar; Arkkio, Antero2006 Validity of Numerical Impulse Response Test in Studying Unbalanced Magnetic Pull in Electrical Machines with Parallel Stator Windings
Burakov, Andrej; Arkkio, Antero2006 Analysis of Hysteresis Torque in a High-Speed Induction Motor
Dlala, Emad; Arkkio, Antero2006 Circulating currents in the parallel stator conductors of Electrical machines
Islam, Mohammad Jahirul; Arkkio, Antero2006 A simplified online technique for the detection of eccentricity in induction motors
Jover Rodriguez, Pedro; Antonino-Daviu, Jose; Muñoz, Enrique; Arkkio, Antero2006 Numerical Calculation of Eddy-Current Losses for Different Rotor Structures of High-Speed Permanent Magnet Machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2006 A comparative investigation of electrical parameters for fault detection and condition monitoring in induction motors - stator winding current and electromagnetic flux
Negrea, Marian; Jover, Pedro; Arkkio, Antero2006 Combined 2D - 1D Time-Harmonic Model for Analysis of Rotating Electrical Machines
Pippuri, Jenni; Arkkio, Antero2006 Fault Diagnostics for Electrical Machines
Arkkio, Antero; Hyötyniemi, Heikki; Jover, Pedro; Kokko, Voitto; Lindh, Tuomo; Negrea, Marian2005 A Neuro-Fuzzy-Based Preisach Approach on Hysteresis Modeling
Dlala, Emad; Arkkio, Antero2005 Losses, Cooling and Thermal Analysis of Electrical Machines
Downing, Scott; Reunanen, Arttu; Saari, Juha; Arkkio, Antero2005 A simplified predictive filter-fuzzy logic method for induction motor condition monitoring
Jover, Pedro; Negrea, Marian; Arkkio, Antero; Muñoz, Enrique2005 Electromechanical Interactions in Electrical Machines
Arkkio, Antero; Belahcen, Anouar; Holopainen, Timo; Kurronen, Panu; Laurila, Lasse; Saren, Hannu; Sopanen, Jussi2004 Modelling of Magnetic Materials
Arkkio, Antero; Belahcen, Anouar; Ivanyi, Amalia; Saitz, Julius; Suorsa, Ilkka2004 Vibration measurements for validation of electromechanical rotor model for cage induction motor Vibration measurements for validation of electromechanical rotor model for cage induction motor
Holopainen, Timo; Aatola, Seppo; Arkkio, Antero2004 Mechanical Model for Study Induction Motor Under Fault Condition
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Mechanical Model to Study Induction Motor Under Fault Conditions
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Frequency-Dependence of Magnetisation of a Slip-Ring Induction Generator
Lin, Ranran; Arkkio, Antero2004 An Analytical Model of Slip-Ring Induction Machines Including Magnetic Saturation and Rotor Position Angle
Pippuri, Jenni; Arkkio, Antero2004 Combined solution of electromagnetic field and circuit equations in modelling the exitation control of synchronous generator
Repo, Anna-Kaisa; Arkkio, Antero2004 Simulation of Electric Drive Systems with Coupled Finite Element Analysis and System Simulator
Kanerva, Sami; Seman, Slavomir; Arkkio, Antero2003 Effects of saturation on the forces in induction motors with whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 Design of Synchronous PM Motor for Submersed Marine Propulsion Systems
Arkkio, Antero; Bianchi, Nicola; Bolognani, Silverio; Jokinen, Tapani; Luise, F.; Rosu, Marius2002 Electromechanical interaction in rotor vibrations of electric machines
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2002 Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Pöyhönen, S.; Negrea, M.; Jover, P.; Arkkio, A.; Hyötyniemi, H.2002 Comparison of reconstruction schemes of multiple SVM s applied to fault classification of a cage induction motor
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.2002 Spatial linearity of unbalanced magnetic pull in induction motors during eccentric rotor motions
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Numerical identification of the electromagnetic force parameters for cage rotor from impule response
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Mekatronisten järjestelmien mallinnus ja simulointi tuotekehityksen ja kunnonvalvonnan tarpeisiin
Holopainen, T.; Arkkio, A.; Scholliers, J.; Vessonen, I.2001 Generalisation of magnetic properties modeling to hard magnetic materials
Rosu, Marius; Arkkio, Antero; Jokinen, Tapani2001 Adcanced utilization of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines
Szücs, Áron; Arkkio, Antero; Jokinen, Tapani2001 Newton Raphson iteration using the finite element method and the elimination of inner nodes for the consideration of eddy-currents in multi-conductor windings
Szücs, A.; Arkkio, A.1998 A new technique for the consideration of eddy-currents in multi-conductor windings using the finite element method
Szücs, Á.; Arkkio, A.1998 Vaihtosähkökoneiden yliaaltoilmiöt
Jokinen, T.; Perho, J.; Niemenmaa, A.; Arkkio, A.1995 Eddy-current losses in the stator winding of cage induction motors
Yatchev, I.; Arkkio, A.; Niemenmaa, A.1995 Patents and invention disclosures
PatentInductor
Arkkio, Antero; Saitz, J.; Virolainen, P.2004 Acinhronnaya electritseckaya machina
Arkkio, Antero1999 Asynchronous Electric Machine and Rotor and Stator for use in Associations there with
Arkkio, Antero1997 Rotor Construction in an Asynchronous Electric Machine
Arkkio, Antero; Lindgren, O.1997 Epätahti sähkökone ja sen yhteydessä käytettävät roottori ja staattori
Arkkio, A.1994
Additional Losses of Electrical Machines under Torsional Vibration
Modeling the Effect of Multiaxial Stress on Magnetic Hysteresis of Electrical Steel Sheets: A Comparison
Magneto-mechanical modeling of electrical steel sheets
Simulation of an Induction Motor’s Rotor After Connection
Combined Model for Simulating the Effect of Transients on a Damaged Rotor Cage
Identification of Magnetic Properties for Cutting Edge of Electrical Steel Sheets
Reduced Basis Finite Element Modeling of Electrical Machines with Multiconductor Windings
Domain Decomposition Approach for Efficient Time-Domain Finite-Element Computation of Winding Losses in Electrical Machines
Inverse Thermal Modeling to Determine Power Losses in Induction Motor
Efficient finite element method to estimate eddy current loss due to random interlaminar contacts in electrical sheets
Influence of the rotor eccentricity on the torque of a cage induction machine
Modelling anisotropy in non-oriented electrical steel sheet using vector Jiles-Atherton model
Space-Vector Models for Torsional Vibration of Cage Induction Motors
Coupled Magneto-Mechanical Analysis of Iron Sheets under Biaxial Stress
The Use of a Multilabel Classification Framework for the Detection of Broken Bars and Mixed Eccentricity Faults Based on the Start-Up Transient
Efficient Finite-Element Computation of Circulating Currents in Thin Parallel Strands
Monte Carlo Analysis of Circulating Currents in Random-Wound Electrical Machines
Model of Magnetic Anisotropy of Non-Oriented Steel Sheets for Finite-Element Method
Energy-Preserving Methods and Torque Computation from Energy Balance in Electrical Machine Simulations
Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress
Numerical Analysis of the Power Balance of an Electrical Machine with Rotor Eccentricity
Diagnosis of Induction Motors Under Varying Speed Operation by Principal Slot Harmonic Tracking
Analytical model for magnetic anisotropy of non-oriented steel sheets
3D permeance model of induction machines taking into account saturation effects and its connection with stator current and shaft speed spectra
Identification of Synchronous Machine Magnetization Characteristics From Calorimetric Core-Loss and No-Load Curve Measurements
Estimation of additional losses due to random contacts at the edges of stator of an electrical machine
Effect of Mechanical Stress on Excess Loss of Electrical Steel Sheets
Segregation of Iron Losses From Rotational Field Measurements and Application to Electrical Machine
Particle filter-based estimation of instantaneous frequency for the diagnosis of electrical asymmetries in induction machines
A 2D FEM analysis of electromechanical signatures in induction motors under dynamic eccentricity
Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed Synchronous Motors
Instantaneous power balance in finite-element simulation of electrical machines
Comparison of finite-element based state-space models for PM synchronous machines
Computation of torque of an electrical machine with different types of finite element mesh in the air gap
Rotor radial position control and its effect on the total efficiency of a bearingless induction motor with a cage rotor
Magnetomechanical coupled FE simulations of rotating electrical machines
Broken bar indicators for cage induction motors and their relationship with the number of consecutive broken bars
Experimental determination and numerical evaluation of core losses in a 150-kVA wound-field synchronous machine
Iron Losses, Magnetoelasticity and Magnetostriction in Ferromagnetic Steel Laminations
Modeling of Losses Due to Inter-Laminar Short-Circuit Currents in Lamination Stacks
Eccentricity related forces in two-pole induction motor with four-pole stator damper winding analyzed using measured rotor orbits
Numerical Investigation of the Effects of Loading and Slot Harmonics on the Core Losses of Induction Machines
Contribution of Maxwell stress in air on the deformations of induction machines
A hybrid PBIL-based harmony search method
A hybrid optimization method for wind generator design
Eddy-Current Loss Modeling for a Form-Wound Induction Motor Using Circuit Model
Loss minimization for form-wound stator winding of a high-speed induction motor
Parameter estimation for a deep-bar induction motor
A 2D FEM model for transient and fault analysis of induction machines
Calorimetric system for measurement of synchronous machine losses
Importance of Iron-Loss Modeling in Simulation of Wound-Field Synchronous Machines
Including slot harmonics to mechanical model of two-pole induction machine with a force actuator
Controlling rotor vibrations of a two-pole induction machine with unipolar actuator
Fault diagnosis in induction motors using the Hilbert-Huang transform
Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools
Power limits of high-speed permanent-magnet electrical machines for compressor applications
Circuit models for predicting core losses in the stator and rotor of a caged induction machine with sinusoidal supplies
Model of laminated ferromagnetic cores for loss prediction in electrical machines
Low-frequency oscillation in rotor vibration of a two-pole induction machine with extra four-pole stator winding
Finite-element analysis for a rolling-rotor electrical machine
Computation of additional losses due to rotor eccentricity in electrical machines
On the importance of incorporating iron losses in the magnetic field solution of electrical machines
Interdependence of hysteresis and eddy-current losses in laminated magnetic cores of electrical machines
FEM for directly coupled magneto-mechanical phenomena in electrical machines
Eddy-current losses and temperature rise in the form-wound stator winding of an inverter-fed cage induction motor
Rotordynamic analysis of different rotor structures for high-speed permanent-magnet electrical machines
End-winding vibrations caused by steady-state magnetic forces in an induction machine
Analysis of eddy-current loss in end shield and frame of a large induction machine
Axial flux and eddy-current loss in active region of a large-sized squirrel-cage induction motor
Numerical pulse test for synchronous machines
Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Inclusion of eddy currents in laminations in two-dimensional finite element analysis
Interdependence of demagnetization, loading, and temperature rise in a permanent-magnet synchronous motor
Transient detection of eccentricity-related components in induction motors through the Hilbert-Huang transform
Detection of combined faults in induction machines with stator parallel branches through the DWT of the start-up current
A General Model for Investigating the Effects of the Frequency Converter on the Magnetic Iron Losses of a Squirrel-Cage Induction Motor
Effects of pulse-width-modulated supply voltage on eddy currents in the form-wound stator winding of a cage induction motor
Comparative thermal analysis of different rotor types for a high-speed permanent-magnet electrical machine
Multiphysics thermal design of a high-speed permanent-magnet machine
Attenuation of harmonic rotor vibration in a cage rotor induction machine by a self-bearing force actuator
Electromechanical interaction in eccentric-rotor cage induction machine equipped with a self-bearing force actuator
A built-in force actuator for active control of lateral rotor vibration in cage induction electrical machines
Calculation and analysis of stator end-winding leakage inductance of an induction machine
Validation of a time-harmonic numerical model for solving magnetic field in end region of a radial-flux machine
Time-Harmonic Induction-Machine Model Including Hysteresis and Eddy Currents in Steel Laminations
Modeling magnet length within 2d finite-element analysis of electric machines
Demagnetization testing for a mixed-grade dove-tail permanent magnet machine
Modifications of construction of rolling rotor switched reluctance motors
Locally coupled magneto-mechanical model of electrical steel
Comprehensive Dynamic Loss Model of Electrical Steel Applied to FE Simulation of Electrical Machines
A Fast Fixed-Point Method for Solving Magnetic Field Problems in Media of Hysteresis
Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Magnetodynamic vector hysteresis model of ferromagnetic steel laminations
Analysis of the Convergence of the Fixed-Point Method Used for Solving Nonlinear Rotational Magnetic Field Problems
Time-stepping finite element analysis of eddy currents in the form-wound stator winding of a cage induction motor supplied from a sinusoidal voltage source
Air-gap force distribution and vibration pattern of Induction motors under dynamic eccentricity
A simplified scheme for induction motor condition monitoring
A model-based flexural rotor vibration control in cage induction electrical machines by a built-in force actuator
3-D finite element analysis of magnetic forces on stator end-windings of an induction machine
Identification of Electromagnetic Torque Model for Induction Machines With Numerical Magnetic Field Solution
Dynamic electromagnetic torque model and parameter estimation for a deep-bar induction machine
Partial Demagnetization of Permanent Magnets in Electrical Machines Caused by an Inclined Field
Low-order parametric force model for eccentric-rotor electrical machine equipped with parallel stator windings and rotor cage
Comparison of the unbalanced magnetic pull mitigation by the parallel paths in the stator and rotor windings
Measurement and analysis of hysteresis torque in a high-speed induction machine
Locally convergent fixed-point method for solving time-stepping nonlinear field problems
Effects of the slot harmonics on the unbalanced magnetic pull in an induction motor with an eccentric rotor
Time-harmonic finite-element analysis of eddy currents in the form-wound stator winding of a cage induction motor
DWT analysis of numerical and experimental data for the diagnoses of dynamic eccentricity in induction motors
Distributed model for electromechanical interaction in rotordynamics of cage-rotor electrical machines
Numerical impulse response test to identify parametric models for closed-slot deep-bar induction motors
Detection of Stator Winding Fault in Induction Motor Using Fuzzy Logic
Comparison of Demagnetization Models for Finite-Element Analysis of Permanent-Magnet Synchronous Machines
Low-order parametric force model for eccentric-rotor electrical machine with parallel connections in stator winding
Low-order parametric force model for a salient-pole synchronous machine with eccentric rotor
Inverted and Forward Preisach Models for Numerical Analysis of Electromagnetic Field Problems
A Neuro-fuzzy-based Preisach approach on hysteresis modeling
Signatures of electrical faults in force distribution and vibration pattern of induction motors
Extraction of circuit parameters from time stepping FEM computation for coupled field-circuit simulation
2D 1D Time-harmonic model for rotating electrical machines
Numerical impulse response test to estimate circuit-model parameters for induction machines
Performance study of a doubly fed wind-power induction generator under network disturbances
Comparison of simulators for variable-speed wind-turbine transient analysis
Ride-through analysis of doubly fed induction wind-power generator under unsymmetrical network disturbance
Hysteresis model for finite element analysis of permanent magnet demagnetization in a large synchronous motor under a fault condition
Hysteresis modeling based on symmetric minor loops
Unbalanced magnetic pull induced by arbitrary eccentric motion of cage rotor in transient operation.Part 1: Analytical model
Electromechanical interaction in rotordynamics of cage induction motors
Unbalanced magnetic pull induced by arbitrary eccentric motion of cage rotor in transient operation.Part 2: Verification and numerical parameter estimation
Thermal analysis of Azipod permanent magnet propulsion motor
Inductance model for coupling finite element analysis with circuit simulation
Coupling pairwise support vector machines for fault classification
Numerical identification of electromagnetic force parameters for linearized rotordynamic model of cage induction motors
Effects of saturation on the forces of induction motors with whirling cage rotor
Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Spatial linearity of an unbalanced magnetic pull in induction motors during eccentric rotor motions
Impulse method to calculate the frequency response of the electromagnetic forces on whirling cage rotors
Electromagnetic forces of the cage rotor in conical whirling motion
Modelling of induction machines with skewed rotor slots
Electromagnetic force on a whirling cage rotor
A Comparative Analysis of a Permanent Magnet Synchronous Motor Design
Active Magnetic Bearing for High-Speed Electric Machine
Consideration of eddy currents in multi-conductor windings using the finite element method and the elimination of inner nodes
Contribution to the finite element analysis of eddy-currents in multi-conductor windings surrounded by magnetically non-linear media
Determination of forces and linearized parameters of radial active magnetic bearings by finite element technique
A 50 kW Homopolar Motor with superconducting field windings
Modelling the sources and transmission of acoustic noise in electrical machines -The chain from the electromagnetic excitation to sound radiation
Conference proceedingsModelling the effect of multiaxial stress on magnetic hysteresis of electrical steel sheets A comparison
Aydin, U.; Rasilo, P.; Martin, F.; Singh, D.; Daniel, L.; Belahcen, A.; Kouhia, R.; Arkkio, A.2017 ISBN: 9781509010325Simulation of an induction motor's rotor after connection
Climente-Alarcon, Vicente; Sundaria, Ravi; Panchal, Jay; Arkkio, Antero2017 ISBN: 9781509010325Higher-order finite element modeling of material degradation due to cutting
Sundaria, Ravi; Lehikoinen, Antti; Hannukainen, Antti; Arkkio, Antero2017 ISBN: 9781509042814Two-axis models for torsional vibration of synchronous machines
Arkkio, Antero; Holopainen, Timo P.2016 ISBN: 9781509025381Space-vector models for torsional vibration of cage induction motors
Arkkio, Antero; Holopainen, Timo P.2016 ISBN: 9781479988044Analytical investigation of DC link overvoltages during freewheeling for inverters in EV
Chandran, Aravind Ramesh ; Hennen, Martin; Arkkio, Antero2016 ISBN: 9781509004034Current variation in a rotor bar during transients due to a hot spot
Climente-Alarcon, Vicente; Sathyan, Sabin; Arkkio, Antero; Antonino-Daviu, Jose A.2016 ISBN: 9781479917624Combined model for simulating the effect of a heavy transient on a damaged rotor cage
Climente-Alarcon, Vicente; Nair, Devi; Sundaria, Ravi; Antonino-Daviu, Jose A.; Arkkio, Antero2016 ISBN: 9781509025381Improved model for the prediction of core loss in finite element analysis of electric machines
Dlala, Emad; Solveson, Mark; Stanton, Scott; Arkkio, Antero2016 ISBN: 978-1-4799-7941-7A multi-label classification approach for the detection of broken bars and mixed eccentricity faults using the start-up transient
Georgoulas, George; Climente-Alarcon, Vicente; Antonino-Daviu, Jose A.; Stylios, Chrysostomos D.; Arkkio, Antero; Nikolakopoulos, George2016 in IEEE International Conference on Industrial Informatics (Institute of Electrical and Electronics Engineers Inc.)ISBN: 9781509028702ISSN: 1935-4576Identification of magnetic properties for cutting edge of electrical steel sheets
Holopainen, Timo P.; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 9781509025381Identification of magnetic model parameters for cutting edge of electrical steel sheets
Holopainen, Timo; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 978-1-5090-2537-4 Simulation Model of Electrical Steel Piercing
Laakso, Sampsa; Väänänen, Arijussi; Bossuyt, Sven; Arkkio, Antero2016 in Procedia Manufacturing (Elsevier B.V.)ISSN: 2351-9789Reduced basis finite element modelling of electrical machines with multi-conductor windings
Lehikoinen, Antti; Arkkio, Antero; Belahcen, Anouar2016 ISBN: 9781509025381Inverse thermal modelling to determine power losses in induction motor
Nair, Devi Geetha; Arkkio, Antero2016 ISBN: 9781509010325Coupled analytical and 3D numerical thermal analysis of a TEFC induction motor
Nair, Devi Geetha; Jokinen, Tapani; Arkkio, Antero2016 ISBN: 9781479988044Multiaxial magneto-mechanical modelling of electrical machines with hysteresis
Rasilo, Paavo; Aydin, Ugur; Singh, Deepak; Martin, Floran; Kouhia, Reijo; Belahcen, Anouar; Arkkio, Antero2016 ISBN: 978-1-78561-188-9Analysis of iron losses on the cutting edges of induction motor core laminations
Rasilo, Paavo; Aydin, Ugur; Holopainen, Timo P.; Arkkio, Antero2016 ISBN: 9781509025381Permanent magnet assisted synchronous reluctance motor in hoist application
Salomäki, Janne; Repo, Anna-Kaisa; Uusiniitty, Toni; Arkkio, Antero2016 ISBN: 9781509020676Efficiency map prediction of flux switching machine
Shah, Sahas Bikram; Arkkio, Antero2016 ISBN: 9781479988044Eddy current loss calculation in burred laminated cores
Shah, Sahas Bikram; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 9781509010325Power balance approach to study electromagnetic damping in rotor dynamics
Silwal, Bishal; Rasilo, Paavo; Arkkio, Antero2016 ISBN: 9781509010325Measurement of torque harmonics of a cage induction machine under rotor eccentricity
Silwal, B.; Rasilo, P.; Haavisto, Ari; Belahcen, A.; Arkkio, A.2016 ISBN: 97814799880443-D Eddy Current Modelling of Steel Laminations to Analyze Edge Effects
Sundaria, Ravi; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2016 ISBN: 978-83-62712-04-5Automation of the startup transient analysis of induction motors using a predictive stage
Climente-Alarcon, Vicente; Arkkio, Antero; Antonino-Daviu, Jose A.2015 ISBN: 978-1-4799-6649-3Diagnosis of induction machines under varying speed operation by principal slot harmonic tracking
Climente Alarcon, Vicente; Antonino-Daviu, Jose Alfonso; Haavisto, Ari; Arkkio, Antero2014 ISBN: 978-1-4799-4389-0Evolution of high order harmonics during a bar breakage with compensation
Climente Alarcon, Vicente; Antonino-Daviu, Jose Alfonso; Haavisto, Ari; Arkkio, Antero2014 ISBN: 978-1-4799-4389-0Evolution of high order fault harmonics during a bar breakage with compensation
Climente-Alarcon, V.; Antonino-Daviu, J. A.; Haavisto, A.; Arkkio, A.2014 ISBN: 9781479943890Electrical fault diagnosis for an induction motor using an electromechanical FE model
Farzam Far, Mehrnaz; Arkkio, Antero; Roivainen, Janne2014 ISBN: 978-1-4799-4775-1Form-wound stator winding for high-speed induction motors
Khang, Huynh; Saari, Juha; Arkkio, Antero2014 ISBN: 978-1-4799-4775-1Segregation of Iron Losses from Rotational Field Measurements and Application to Electrical Machine
Belahcen, Anouar; Rasilo, Paavo; Arkkio, Antero2013 Combined FE and two dimensional spectral analysis of broken cage faults in induction motors
Martinez, Javier; Belahcen, Anouar; Arkkio, Antero2013 ISBN: 978-1-4799-0223-1An accurate and fast technique for correcting spectral leakage in motor diagnosis
Martinez, Javier; Philipp, Francois; Glesner, Manfred; Arkkio, Antero2013 ISBN: 978-1-4799-0025-1Vector Generalization of Uniaxial Models for Magnetomechanical Hysteresis and Magnetostriction
Rasilo, Paavo; Singh, Deepak; Kouhia, Reijo; Belahcen, Anouar; Arkkio, Antero2013 Evaluation and comparison of different numerical computation methods for the electromagnetic torque in electrical machines
Silwal, Bishal; Rasilo, Paavo; Perkkiö, Lauri; Hannukainen, Antti; Eirola, Timo; Arkkio, Antero2013 ISBN: 978-1-4799-1446-3Proper finite-element discretization for torque computation of cage induction motors
Arkkio, Antero; Hannukainen, Antti2012 ISBN: 978-1-4673-1300-1Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines
Belahcen, Anouar; Fonteyn, Katarzyna; Kouhia, Reijo; Rasilo, Paavo; Arkkio, Antero2012 ISBN: 978-3-85125-258-3Active control method for attenuation of torque vibrations in AC induction motor
Kiviluoto, Sami; Hyvämäki, Tapani; Zenger, Kai; Kärkkäinen, Ilari; Arkkio, Antero2012 ISBN: 978-609-459-079-5A smart wireless sensor for the diagnosis of broken bars in induction motors
Philipp, F.; Martinez, Javier; Glesner, M.; Arkkio, Antero2012 ISBN: 978-1-4673-2774-9Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed Synchronous Motors
Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2012 ISBN: 978-1-4673-0141-1Unipolar flux in bearingless two-pole machine
Sinero, Anssi; Jokela, Tommi; Arkkio, Antero2012 ISBN: 978-1-4673-0141-1Modeling two-pole cage induction machine equipped with embedded force actuator
Sinervo, Anssi; Arkkio, Antero2012 Controlling rotor vibrations of two-pole induction machine under loaded operation
Sinervo, Anssi; Arkkio, Antero2012 ISBN: 978-609-459-079-5Calorimetric Measurement of Stator Core Losses
Singh, Deepak; Arkkio, Antero2012 Synchronous torques of a cage induction motor from time-discretized finite element analysis
Arkkio, Antero2011 Numerical Investigation of the Effects of Loading and Slot Harmonics on the Core Losses of Induction Machines
Dlala, Emad; Bottauscio, Oriano; Chiampi, Mario; Zucca, Mauro; Belahcen, Anouar; Arkkio, Antero2011 A negative selection algorithm-based motor fault detection scheme
Gao, X.Z.; Wang, X.; Ovaska, S.J.; Arkkio, A.; Zenger, K.2011 Eddy-current loss modeling for induction motor with a form-wound stator winding
Huynh Van, Khang; Arkkio, Antero2011 ISBN: 978-1-41839-495-8Power balance for verifying torque computation within time-discretized finite-element analysis
Arkkio, Antero; Hannukainen, Antti; Niemenmaa, Asko2010 ISBN: 978-83-921340-8-4Origin of parasitic time-periodic torques and forces in electrical machines
Arkkio, Antero; Zenger, Kai2010 Electromechanical interaction in a synchronous reluctance machine
Arkkio, Antero; Nepal, Basanta Raj; Sinervo, Anssi2010 ISBN: 978-1-4244-7919-1Permanent Magnets Models and Losses in 2D FEM Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2010 Use of high order harmonics for diagnosis of simultaneous faults via Wigner-Ville distributions
Climente-Alarcon, Vicente; Antonino-Daviu, Jose; Riera-Guasp, Martin; Jover-Rodriguez, Pedro; Arkkio, Antero2010 in IEEE Industrial Electronics Society (IEEE Industrial Electronics Society)ISBN: 978-1-4244-5226-2ISSN: 1553-572XGeneral formulation for the Newton-Raphson method and the fixed-point method in finite-element programs
Dlala, Emad; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Contribution of Maxwell stress in air on the deformations of induction machines
Fonteyn, Katarzyna; Belahcen, Anouar; Rasilo, Paavo; Kouhia, Reijo; Arkkio, Antero2010 Simulated results and experimental verification of a novel magneto-mechanical coupled method
Fonteyn, Katarzyna; Belahcen, Anouar; Rasilo, Paavo; Kouhia, Reijo; Arkkio, Antero2010 A hybrid PBIL-based harmony search method with application in wind generator optimization
Gao, Xiao-Zhi; Jokinen, Tapani; Wang, Xiaolei; Arkkio, Antero; Ovaska, Seppo2010 A new harmony search method in optimal wind generator design
Gao, Xiao-Zhi; Jokinen, Tapani; Wang, Xiaolei; Ovaska, Seppo; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Resistive loss identification of an inverter-fed deep-bar induction motor
Huynh Van, Khang; Repo, Anna-Kaisa; Arkkio, Antero2010 ISBN: 978-1-4244-7919-1Thermal analysis of a high-speed PM machine using numerical and thermal-network method
Kolondzovski, Zlatko; Sallinen, Petri; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Harmonic torque suppression by manual voltage injection
Kärkkäinen, Ilari; Arkkio, Antero2010 ISBN: 978-1-4244-4175-4Circuit models for predicting core losses in the stator and rotor of a caged induction machine with sinusoidal supplies
Ladin, Omar; Dlala, Emad; Arkkio, Antero2010 Modeling the effect of inverter supply on eddy-current losses in synchronous machines
Rasilo, Paavo; Arkkio, Antero2010 ISBN: 978-1-4244-7919-1Application of TFD tools for the tracing of eccentricity-related components in induction machines
Antonino-Daviu, Jose; Climente-Alarcon, V.; Pons-Llinares, J.; Pineda-Sanchez, M.; Jover-Rodriguez, Pedro; Arkkio, Antero2009 ISBN: 978-1-4244-4648-3ISSN: 1553-572XDiagnosis of stator short-circuits through Wigner-Ville transient-based analysis
Climente-Alarcon, V.; Antonino-Daviu, Jose; Riera-Guasp, Martin; Puche, Ruben; Escobar-Moreira, L.; Wiener, N.; Jover-Rodriguez, Pedro; Arkkio, Antero2009 ISBN: 978-1-4244-4648-3ISSN: 1553-572XNovel Mesurement Device for the Investigation of Magnetostriction in Electrical Machinery.
Fonteyn, Katarzyna; Pyhäranta, Eero; Belahcen, Anouar; Rasilo, Paavo; Arkkio, Antero2009 Identification of Rotor Resistive Loss Models for Cage Induction Motors
Huynh Van, Khang; Repo, Anna-Kaisa; Arkkio, Antero2009 ISBN: 978-9985-9089-1-4Finite-element discretisation for analysing eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2009 Harmonic rotor vibration with control in a cage induction machine
Laiho, Antero; Tammi, Kari; Arkkio, Antero2009 Parameter estimation of synchronous machines by using the differential evolution algorithm
Mäkela, Olli; Repo, Anna-Kaisa; Arkkio, Antero2009 Suppression of rotor vibrations of an electric machine at the critical speed by optimal state feedback controller
Orivuori, Juha; Sinervo, Anssi; Zenger, Kai; Arkkio, Antero2009 ISBN: 978-963-311-369-1Torque pulsations and magnetic field energy in permanent-magnet synchronous machines
Repo, Anna-Kaisa; Petsa, Stavroula; Arkkio, Antero2009 ISBN: 978-9985-9089-1-4On convergence problems of adaptive fir filter with lms algorithm
Tammi, Kari; Laiho, Antti; Lantto, Erkki; Zenger, Kai; Arkkio, Antero2009 ISBN: 978-83-60716-71-7Complementary diagnosis of rotor asymmetries through the tracing of the right sideband component in the stator startup current
Antonino-Daviu, Jose; Jover, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Pineda-Sánchez, M.2008 ISBN: 978-1-4244-1736-0Mixed fault diagnosis in induction machines with stator parallel branches through the application of the DWT to the startup current
Antonino-Daviu, Jose; Jover, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose2008 ISBN: 978-1-4244-1736-0Origin of unbalanced-magnetic-pull components in electrical machines
Arkkio, Antero; Holopainen, Timo2008 Electromechanical Interaction in Rotordynamics of Electrical Machines an Overview
Holopainen, Timo; Arkkio, Antero2008 ISBN: 978-1-84334-458-2Optimum Supply for an Inverter-Fed Cage Induction Motor at Different Load Conditions
Islam, M.Jahirul; Arkkio, Antero2008 Self-bearing cage induction machine actuator in active control of rotor vibrations
Laiho, Antti; Tammi, Kari; Orivuori, Juha; Zenger, Kai; Sinervo, Anssi; Arkkio, Antero2008 Electromechanical interaction in eccentric-rotor cage induction machine equipped with a self-bearing force actuator
Laiho, Antti; Tammi, Kari; Orivuori, Juha; Sinervo, Anssi; Zenger, Kai; Arkkio, Antero2008 Calculation of Stator End-Winding Reactance of an Induction Machine Based on Magnetic Energy by 3-D Finite Element Analysis
Lin, Ranran; Arkkio, Antero2008 3-D Finite Element Analysis of Magnetic Forces Exerted on Stator End-Winding of an Induction Motor
Lin, Ranran; Arkkio, Antero2008 Parameter estimation for synchronous machines using numerical pulse test within finite element analysis
Mäkelä, Olli; Repo, Anna-Kaisa; Arkkio, Antero2008 ISBN: 978-1-4244-1736-0Magnetodynamic vector hysteresis model of ferromagnetic steel laminations
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Active control of radial rotor vibrations in cage induction electrical machines by a built-in force actuator
Laiho, Antti; Burakov, Andrej; Tammi, Kari; Zenger, Kai; Arkkio, Antero2007 Physical modeling, analysis and active model-based control of rotor vibrations in electric motors
Orivuori, Juha; Altowati, Ali; Hrbcek, Jozef; Zenger, Kai; Arkkio, Antero; Laiho, Antti; Tammi, Kari2007 ISBN: 978-951-22-8913-4ISSN: 1455-4046Parameter estimation for induction motors to study the effects of voltage, frequency and slip
Repo, Anna-Kaisa; Hinkkanen, Marko; Arkkio, Antero2007 Mixed-Grade Pole Design for Permanent Magnet Synchronous Machines
Ruoho, Sami; Arkkio, Antero2007 Simulation as a means to test advanced control algorithms in suppressing rotor vibrations in electric machines
Zenger, Kai; Orivuori, Juha; Sinervo, Anssi; Altowati, Ali; Hrbcek, Jozef; Arkkio, Antero; Laiho, Antti; Tammi, Kari2007 ISBN: 978-3-901608-32-2Sähkömoottorin roottorivärähtelyjen aktiivivaimennus
Zenger, Kai; Orivuori, Juha; Laiho, Antti; Tammi, Kari; Burakov, Andrej; Arkkio, Antero2007 ISBN: 978-952-5183-33-7ISSN: 1455-6502Validation of electromechanical rotor model for cage induction motors with parallel paths in stator windings
Holopainen, Timo; Aatola, Seppo; Burakov, Andrej; Arkkio, Antero2006 ISBN: 3-200-00689-7Effects of electromechanical faults on the airgap force distribution of induction motors
Jover Rodriguez, Pedro Vicente; Belahcen, Anouar; Arkkio, Antero; Antonino-Daviu, José2006 Numerical Analysis of Eddy-Current Losses in the Rotor of a High-Speed Synchronous Machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2006 Parameter estimation of induction machines using the numerical impulse method
Repo, Anna-Kaisa; Arkkio, Antero2006 Estimating the circuit models for a deep-bar induction motor using time harmonic finite element analysis
Repo, Anna-Kaisa; Niemenmaa, Asko; Arkkio, Antero2006 Induction and Permanent-Magnet Synchronous Machines for High-Speed Applications
Arkkio, Antero; Jokinen, Tapani; Lantto, Erkki2005 Applying genetic algorithms to identify the parameters of a low-order force model for a salient-pole synchronous machine with eccentric rotor
Burakov, Andrej; Tenhunen, Asmo; Arkkio, Antero2005 A general scheme for induction motor condition monitoring
Jover, Pedro; Negrea, Marian; Arkkio, Antero2005 Electromagnetic Flux-based Condition Monitoring for Electrical Machines
Negrea, Marian; Jover, Pedro; Arkkio, Antero2005 ISBN: 0-7803-9123-XAdvanced Modeling of Doubly Fed Induction Generator Wind Turbine under Network Disturbance
Seman, Slavomir; Iov, F.; Niiranen, J.; Arkkio, Antero2005 Extraction of Circuit Parameters from Time Stepping FEM Computation for Coupled Field-Circuit Simulation
Kanerva, Sami; Arkkio, Antero2004 Inductance Model for Coupling Finite Element Analysis with Circuit Simulation
Kanerva, Sami; Arkkio, Antero; Seman, Slavomir2004 A comparative investigation on the reliability and accuracy of different diagnostic media when attempting to identify specific faults in an induction motor
Negrea, Marian; Jover, Pedro; Arkkio, Antero2004 ISBN: 88-89389-00-1Vizualising the results of numerical magnetic field analysis of electric machines, A147
Repo, Anna-Kaisa; Lehtonen, Heidi-Maria; Arkkio, Antero; Niemenmaa, Asko2004 Mass reduction of an AC inductor
Saitz, Julius; Arkkio, Antero2004 Transient Analysis of Doubly Fed Power Induction Generator Using Coupled Field-Circuit Model
Seman, Slavomir; Kanerva, Sami; Niiranen, Jouko; Arkkio, Antero2004 Analysis of a 1.7 MVA Doubly Fed Wind-Power Induction Generator during Power Systems Disturbances Power Systems Disturbances
Seman, Slavomir; Niiranen, Jouko; Kanerva, Sami; Arkkio, Antero2004 Analysis of thermal fields in electrical machines using finite element method
Al-Towati, Ali; Arkkio, Antero2003 Application of Low Order Parametric Force Model to Describe the Forces in Eccentric Rotor Synchronous Machine
Burakovas, Andrejus; Tenhunen, Asmo; Arkkio, Antero2003 Numerical identification of electromagnetic force parameters for linearized rotordynamic model of cage induction motors Numerical identification of electromagnetic force parameters for linearized roto
Holopainen, Timo; Tenhunen, Asmo; Lantto, Erkki; Arkkio, Antero2003 Induction Motor Stator Fault Detection Using Fuzzy Logic
Jover, Pedro; Arkkio, Antero2003 Coupling pairwise support vector machines for fault classification
Pöyhönen, Sanna; Arkkio, Antero; Hyötyniemi, Heikki2003 Dynamic Model of Cage Induction Motor Considering Saturation and Skin Effect
Seman, Slavomir; Saitz, Julius; Arkkio, Antero2003 Effects of equalising currents on electromagnetic forces of whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 Electromagnetic circulatory forces and rotordynamic instability in electric machines
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2002 Modeling, Simulation and Signal Processing with Application to Electric Machine Fault Diagnostics and Condition Monitoring
Negrea, Marian; Pöyhönen, Sanna; Arkkio, Antero; Jover, Pedro; Hyötyniemi, Heikki2002 Fault diagnostics of an electrical machine with multiple support vector classifiers
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.; Koivo, H.2002 Support vector classification for fault diagnostics of an electrical machine
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.; Koivo, H.2002 An Induction motor transient model in simulink including saturation and skin effect in rotor bars
Seman, Slavomir; Arkkio, Antero2002 Electromagnetic damping of stator vibrations in a cage induction motor
Arkkio, A.2001 Thermal analysis of a permanent synchronous motor
Negrea, Marian; Arkkio, Antero; Jokinen, Tapani; Hakuli, Miikka2001 Advanced finite element analysis with macro elements, replacing large meshes of eddy-current carrying windings in electromagnetic field computation
Szücs, Áron; Arkkio, Antero; Jokinen, Tapani2001 An electromechanical model for analysing transients in diesel-driven synchronous generators.
Arkkio, A.; Westerlund, J.2000 Local force calculation for vibration and noise analysis of a synchronous generator
Belahcen, A.; Arkkio, A.2000 Experience of an analysis program for generators and shaft systems at an energy, engineering and service company
Kerttula, J.; Lindgren, O.; Ahtiainen, J.; Orivuori, S.; Arkkio, A.2000 Electromagnetic forces caused by cage induction motor
Lantto, E.; Arkkio, A.; Antila, M.; Pokki, K.; Simon, A.2000 A study of measurement methods of the no-load losses in cage-induction motors
Negrea, M.; Arkkio, A.; Niemenmaa, A.2000 A compared analysis on no-load airgap magnetic field distribution in large output power permanent magnet synchronous motor
Rosu, Marius; Arkkio, A.; Jokinen, T.2000 Finite element modeling of the magnetic field in asynchronous motors taking ferromagnetic hysteresis into account
Saitz, J.; Arkkio, A.; Negrea, A.2000 Advanced utilisation of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines.
Szücs, Áron; Arkkio, A.; Jokinen, T.2000 Modeling of eddy currents in the stator winding of an asynchronous machine using macro elements
Szücs, Áron; Arkkio, A.; Jokinen, T.2000 Representation of skew in time-stepped 2D finite element model of induction machines using a multi-slice technique
Tenhunen, A.; Arkkio, A.2000 Active Magnetic Bearing for High-Speed Electric Machines
Antila, M.; Arkkio, A.; Lantto, E.; Jokinen, T.1999 Finite element analysis to assist condition monitoring of hydrogenerators
Arkkio, A.; Ahtiainen, J.; Lindgren, O.1999 Finite element analysis for hydrogenerators
Arkkio, A.; Ahtiainen, J.; Lindgren, O.1999 Vibration Model for Diesel-Driven Synchronous Generators
Arkkio, Antero; Westerlund, J.; Torsional, J.1999 Radial Forces Calculation in a Synchronous Generator for Noise Analysis
Belahcen, A.; Arkkio, A.; Klinge, P.; Linjama, J.; Voutilainen, V.; Westerlund, J.1999 High-Speed AC Motors
Jokinen, T.; Arkkio, A.1999 Comparison of a partly laminated squirrel cage rotor and a copper coated solid steel rotor for a 50 kW high-speed compressor
Lähteenmäki, Jussi; Arkkio, A.; Soitu, V.; Saari, J.1999 No-load Losses in Cage Induction Motors
Negrea, M.; Arkkio, A.; Niemenmaa, A.; Jokinen, Tapani; Saitz, J.1999 Analysis of the electrical shift angle influence over a variable speed two-phase induction drive
Popescu, M.; Jokinen, T.; Lampola, P.; Arkkio, A.; Demeter, E.; Navrapescu, V.1999 "Demagnetisation State of Permanent Magnets in Large Output Power Permanrent Magnet Synchronous Motor
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1999 The Effect of Optimised Stator Slots and Rotor Configuration on Torque and Electromagnetic Losses in Permanent Magnet Synchronous Motor for Ship Propulsion Drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1999 Prediction of Airgap Magnetic Field Distribution in Large Output Power Permanent Magnet Synchronous Motor
Rosu, Marius; Arkkio, Antero; Jokinen, T.; Mantere, J.; Westerlund, J.1999 The Influence of Optimised Stator Geometry and Rotor Configuration on Motor Characteristics in Permanent Magnet Synchronous Motor for Ship Propulsion Drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1999 Core loss estimation of a cage induction motor using the vector Preisach hysteresis model incorporated in finite element analysis
Saitz, J.; Arkkio, A.1999 Effects of rotor slot opening modification on acoustic noise from induction machines
Tenhunen, A.; Arkkio, A.1999 Effects of asymmetric rotor slot pitch on acoustic noise from induction machines
Tenhunen, A.; Arkkio, A.; Belahcen, A.1999 Hysteresis torque in a cage induction motor
Arkkio, A.; Niemenmaa, A.; Saitz, J.1998 Efficient magnetic-thermal coupled simulation of electrical machines using a double combined FEM-circuit approach
Driesen, J.; Belmans, R.; Hameyer, K.; Arkkio, A.; Jokinen, T.1998 Rotary transformer for the excitation of synchronous machines
Karttunen, S.; Arkkio, A.; Tellinen, J.; Mantere, J.; Varis, J.; Westerlund, J.1998 Development of an inverter fed two-phase variable speed induction motor drive
Popescu, M.; Arkkio, A.; Micu, D.; Demeter, E.; Navrapescu, V.1998 Permanent magnet synchronous motor for ship propulsion drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Nahkuri, V.; Mantere, J.; Westerlund, J.1998 Permanent magnet synchronous motor for ship propulsion drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.1998 Permanent magnet synchronous motor for ship propulsion drive
Rosu, M.; Arkkio, A.; Jokinen, T.; Mantere, J.; Westerlund, J.W.1998 Contribution to the finite element analysis of eddy-currents ain multi-conductor windings surrounded by magnetically non-linear media
Szücs, Á.; Arkkio, A.; Jokinen, T.1998 High speed AC motors
Jokinen, T.; Arkkio, A.1997 Validity of conventional and modern methods of no-load loss calculation in asynchronous machines - statistic approach
Kytömäki, R.; Arkkio, A.; Niemenmaa, A.; Suontausta, A.1997 Variable speed induction motor drive for household refrigerator compressor
Rasmussen, C.; Ritchie, E.; Arkkio, A.1997 Losses in inverter-fed cage induction motors
Arkkio, A.1996 Unbalanced magnetic pull in cage induction motors dynamic and static eccentricity
Arkkio, A.1996 Study of electrical machines, using a new interactive finite element preprocessor
Arkkio, A.; Palko, S.; Saitz, J.; Yatchev, I.1996 High speed AC motors
Jokinen, T.; Arkkio, A.1996 High-speed AC machines
Jokinen, T.; Arkkio, A.1996 Calculation of hysteresis losses by the Preisach model within finite element analysis
Saitz, J.; Arkkio, A.; Szucs, A.1996 Calculation of hysteresis losses by the Preisach model within finite element analysis
Saitz, J.; Arkkio, A.; Szucs, A.1996 Investigation of electrical machines by using a new interactive finite element preprocessorin unix x-window environment
Szucs, A.; Arkkio, A.; Palko, S.; Saitz, J.1996 Unbalanced magnetic pull in a four-pole induction motor with an odd number of rotor slots
Arkkio, A.1995 Design and analysis of electrical motors for a hybrid electric vehicle
Luomi, Jorma; Hellsing, Johan; Lindström, Joachim; Arkkio, Antero1995 Cooling of a 100 000 RPM electrical motor
Saari, J.; Arkkio, A.1995 Unbalanced magnetic pull in a high-speed induction motor with an eccentric ortor
Arkkio, Antero; Lindgren, O.1994 Finite element analysis of the magnetic forces acting on an eccentric rotor of a high-speed induction motor
Arkkio, Antero; Lindgren, O.1994 Losses in high-speed asynchronous motors
Saari, Juha; Arkkio, A.1994 Rotor-slot design for inverter-fed cage induction motors
Arkkio, A.1992 On the choise of the number of rotor slots for inverter-fed cage induction motors
Arkkio, A.1992 Estimation of losses in cage induction motors using finite element techniques
Niemenmaa, A.; Arkkio, A.1992 Non-refereed scientific articles
Unrefereed conference proceedingsFinite Element Modelling of Additional Losses Due to Galvanic Contacts on Edges of Lamination Stacks
Bikram Shah, Sahas; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2013 Effect of Manufacturing on Stator Core Losses
Singh, Deepak; Belahcen, Anouar; Arkkio, Antero2013 Scientific books (monographs)
Book (editor)Suurnopeustekniikka - High Speed Technology in Finland
Larjola, Jaakko; Arkkio, Antero; Pyrhönen, Juha2010 ISBN: 978-952-214-949-7Publications intended for professional communities
Article in professional journalNumerical analysis of eddy-current losses in the rotor of a high-speed synchronous machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2007 in PRZEGLAD ELEKTROTECHNICZNY (Wydawnictwo SIGMA - N O T Sp. z o.o.)Properties of Electrical Steel Sheets Under Strong Mechanical Stress
Fonteyn, Katarzyna; Belahcen, Anouar; Arkkio, Antero2006 in An International Journal for Engineering and Information Sciences (Wydawnictwo SIGMA - N O T Sp. z o.o.)Article in professional conference proceedingsModels of magnetic anisotropy for non oriented steel sheets dedicated to finite element method
Martin, Floran; Singh, Deepak; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2015 Effect of Static Stress on Iron Loss in a Synchronous Reluctance Machine
Singh, Deepak; Rasilo, Paavo; Martin, Floran; Belahcen, Anouar; Arkkio, Antero2015 Published development or research reportPower limits of high-speed permanent-magnet electrical machines for compressor applications
Kolondzovski, Zlatko; Arkkio, Antero; Larjola, Jaakko; Sallinen, Petri2010 Finite-element analysis for a rolling-rotor electrical machine
Arkkio, Antero; Biernat, Adam; Bucki, Bogdan; Kaminski, Gregorz; Niemenmaa, Asko; Smak, Andrzej; Staszewski, Pawel2009 Dependence of hysteresis and eddy-current losses on the excitation frequency and the analysis of losses in inverter-fed electric machines
Dlala, Emad; Belahcen, Anouar; Pippuri, Jenni; Arkkio, Antero2009 Unified Scheme for Implementing the Fixed-Point and Newton-Raphson Methods in Finite-Element Programs of Electromagnetic Field Problems
Dlala, Emad; Arkkio, Antero2009 On the Importance of Incorporating Iron Losses in the Magnetic Field Solution of Electrical Machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2009 FEM for directly coupled magneto-mechanical phenomena in electrical machinesKatarzyna
Fonteyn, Katarzyna; Belahcen, Anouar; Kouhia, Reijo; Arkkio, Antero2009 Eddy-current Losses and Temperature Rise in the Form-wound Stator Winding of an Inverter-fed Cage Induction Motor
Huynh Van, Khang; Islam, M.Jahirul; Repo, Anna-Kaisa; Arkkio, Antero2009 Finite-element analysis of eddy currents in the form-wound stator and rotor winding of a doubly-fed induction generator
Islam, M.Jahirul; Arkkio, Antero2009 Axial Magnetic Flux and Eddy-Current Loss in Core Ends of a Large Induction Machine
Lin, Ranran; Haavisto, Ari; Arkkio, Antero2009 Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Niemenmaa, Asko; Salmia, Lauri; Arkkio, Antero; Saari, Juha2009 Inclusion of Eddy Currents in Laminations in Two-Dimensional Finite Element Analysis
Pippuri, Jenni; Belahcen, Anouar; Dlala, Emad; Arkkio, Antero2009 A Mesh-Free Model of Eddy-Current Losses for 2D Analysis of Ferromagnetic Laminations
Rasilo, Paavo; Arkkio, Antero2009 Finite-element discretiztion for analyzing eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2008 Challenges in the segregation of losses in cage induction machines
Pippuri, Jenni; Arkkio, Antero2008 Active Magnetic Bearings
Arkkio, Antero; Lantto, Erkki; Tommila, Ville2007 Comprehensive Dynamic Loss-Model of Electrical Steel Applied to FE Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2007 Mitigation of UMP Components by the Parallel Stator Windings in Eccentric-rotor Electrical Machines
Burakov, Andrej; Arkkio, Antero2007 A Fast Fixed-Point Method for Solving Nonlinear Field Problems in Time-Stepping Analysis
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Vibrations of Electrical Machines
Holopainen, Timo; Roivainen, Janne; Nordmann, Rainer; Arkkio, Antero2007 Identification of electromagnetic torque model for induction machines with numerical magnetic field solution
Repo, Anna-Kaisa; Rasilo, Paavo; Niemenmaa, Asko; Arkkio, Antero2007 Laboratory of Electromechanics, Annual Report 2006
Schröder, Marika; Arkkio, Antero2007 Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines
Antonino-Daviu, Jose; Jover Rodríguez, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose2006 Coupled Field-Circuit Problems in Electric Power Engineering
Arkkio, Antero; Kanerva, Sami; Repo, Anna-Kaisa; Szucs, Aron2006 Local Magneto-Mechanical Coupling in Electrical Machines
Belahcen, Anouar; Arkkio, Antero2006 Validity of Numerical Impulse Response Test in Studying Unbalanced Magnetic Pull in Electrical Machines with Parallel Stator Windings
Burakov, Andrej; Arkkio, Antero2006 Analysis of Hysteresis Torque in a High-Speed Induction Motor
Dlala, Emad; Arkkio, Antero2006 Circulating currents in the parallel stator conductors of Electrical machines
Islam, Mohammad Jahirul; Arkkio, Antero2006 A simplified online technique for the detection of eccentricity in induction motors
Jover Rodriguez, Pedro; Antonino-Daviu, Jose; Muñoz, Enrique; Arkkio, Antero2006 Numerical Calculation of Eddy-Current Losses for Different Rotor Structures of High-Speed Permanent Magnet Machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2006 A comparative investigation of electrical parameters for fault detection and condition monitoring in induction motors - stator winding current and electromagnetic flux
Negrea, Marian; Jover, Pedro; Arkkio, Antero2006 Combined 2D - 1D Time-Harmonic Model for Analysis of Rotating Electrical Machines
Pippuri, Jenni; Arkkio, Antero2006 Fault Diagnostics for Electrical Machines
Arkkio, Antero; Hyötyniemi, Heikki; Jover, Pedro; Kokko, Voitto; Lindh, Tuomo; Negrea, Marian2005 A Neuro-Fuzzy-Based Preisach Approach on Hysteresis Modeling
Dlala, Emad; Arkkio, Antero2005 Losses, Cooling and Thermal Analysis of Electrical Machines
Downing, Scott; Reunanen, Arttu; Saari, Juha; Arkkio, Antero2005 A simplified predictive filter-fuzzy logic method for induction motor condition monitoring
Jover, Pedro; Negrea, Marian; Arkkio, Antero; Muñoz, Enrique2005 Electromechanical Interactions in Electrical Machines
Arkkio, Antero; Belahcen, Anouar; Holopainen, Timo; Kurronen, Panu; Laurila, Lasse; Saren, Hannu; Sopanen, Jussi2004 Modelling of Magnetic Materials
Arkkio, Antero; Belahcen, Anouar; Ivanyi, Amalia; Saitz, Julius; Suorsa, Ilkka2004 Vibration measurements for validation of electromechanical rotor model for cage induction motor Vibration measurements for validation of electromechanical rotor model for cage induction motor
Holopainen, Timo; Aatola, Seppo; Arkkio, Antero2004 Mechanical Model for Study Induction Motor Under Fault Condition
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Mechanical Model to Study Induction Motor Under Fault Conditions
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Frequency-Dependence of Magnetisation of a Slip-Ring Induction Generator
Lin, Ranran; Arkkio, Antero2004 An Analytical Model of Slip-Ring Induction Machines Including Magnetic Saturation and Rotor Position Angle
Pippuri, Jenni; Arkkio, Antero2004 Combined solution of electromagnetic field and circuit equations in modelling the exitation control of synchronous generator
Repo, Anna-Kaisa; Arkkio, Antero2004 Simulation of Electric Drive Systems with Coupled Finite Element Analysis and System Simulator
Kanerva, Sami; Seman, Slavomir; Arkkio, Antero2003 Effects of saturation on the forces in induction motors with whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 Design of Synchronous PM Motor for Submersed Marine Propulsion Systems
Arkkio, Antero; Bianchi, Nicola; Bolognani, Silverio; Jokinen, Tapani; Luise, F.; Rosu, Marius2002 Electromechanical interaction in rotor vibrations of electric machines
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2002 Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Pöyhönen, S.; Negrea, M.; Jover, P.; Arkkio, A.; Hyötyniemi, H.2002 Comparison of reconstruction schemes of multiple SVM s applied to fault classification of a cage induction motor
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.2002 Spatial linearity of unbalanced magnetic pull in induction motors during eccentric rotor motions
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Numerical identification of the electromagnetic force parameters for cage rotor from impule response
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Mekatronisten järjestelmien mallinnus ja simulointi tuotekehityksen ja kunnonvalvonnan tarpeisiin
Holopainen, T.; Arkkio, A.; Scholliers, J.; Vessonen, I.2001 Generalisation of magnetic properties modeling to hard magnetic materials
Rosu, Marius; Arkkio, Antero; Jokinen, Tapani2001 Adcanced utilization of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines
Szücs, Áron; Arkkio, Antero; Jokinen, Tapani2001 Newton Raphson iteration using the finite element method and the elimination of inner nodes for the consideration of eddy-currents in multi-conductor windings
Szücs, A.; Arkkio, A.1998 A new technique for the consideration of eddy-currents in multi-conductor windings using the finite element method
Szücs, Á.; Arkkio, A.1998 Vaihtosähkökoneiden yliaaltoilmiöt
Jokinen, T.; Perho, J.; Niemenmaa, A.; Arkkio, A.1995 Eddy-current losses in the stator winding of cage induction motors
Yatchev, I.; Arkkio, A.; Niemenmaa, A.1995 Patents and invention disclosures
PatentInductor
Arkkio, Antero; Saitz, J.; Virolainen, P.2004 Acinhronnaya electritseckaya machina
Arkkio, Antero1999 Asynchronous Electric Machine and Rotor and Stator for use in Associations there with
Arkkio, Antero1997 Rotor Construction in an Asynchronous Electric Machine
Arkkio, Antero; Lindgren, O.1997 Epätahti sähkökone ja sen yhteydessä käytettävät roottori ja staattori
Arkkio, A.1994
Modelling the effect of multiaxial stress on magnetic hysteresis of electrical steel sheets A comparison
Simulation of an induction motor's rotor after connection
Higher-order finite element modeling of material degradation due to cutting
Two-axis models for torsional vibration of synchronous machines
Space-vector models for torsional vibration of cage induction motors
Analytical investigation of DC link overvoltages during freewheeling for inverters in EV
Current variation in a rotor bar during transients due to a hot spot
Combined model for simulating the effect of a heavy transient on a damaged rotor cage
Improved model for the prediction of core loss in finite element analysis of electric machines
A multi-label classification approach for the detection of broken bars and mixed eccentricity faults using the start-up transient
Identification of magnetic properties for cutting edge of electrical steel sheets
Identification of magnetic model parameters for cutting edge of electrical steel sheets
Simulation Model of Electrical Steel Piercing
Reduced basis finite element modelling of electrical machines with multi-conductor windings
Inverse thermal modelling to determine power losses in induction motor
Coupled analytical and 3D numerical thermal analysis of a TEFC induction motor
Multiaxial magneto-mechanical modelling of electrical machines with hysteresis
Analysis of iron losses on the cutting edges of induction motor core laminations
Permanent magnet assisted synchronous reluctance motor in hoist application
Efficiency map prediction of flux switching machine
Eddy current loss calculation in burred laminated cores
Power balance approach to study electromagnetic damping in rotor dynamics
Measurement of torque harmonics of a cage induction machine under rotor eccentricity
3-D Eddy Current Modelling of Steel Laminations to Analyze Edge Effects
Automation of the startup transient analysis of induction motors using a predictive stage
Diagnosis of induction machines under varying speed operation by principal slot harmonic tracking
Evolution of high order harmonics during a bar breakage with compensation
Evolution of high order fault harmonics during a bar breakage with compensation
Electrical fault diagnosis for an induction motor using an electromechanical FE model
Form-wound stator winding for high-speed induction motors
Segregation of Iron Losses from Rotational Field Measurements and Application to Electrical Machine
Combined FE and two dimensional spectral analysis of broken cage faults in induction motors
An accurate and fast technique for correcting spectral leakage in motor diagnosis
Vector Generalization of Uniaxial Models for Magnetomechanical Hysteresis and Magnetostriction
Evaluation and comparison of different numerical computation methods for the electromagnetic torque in electrical machines
Proper finite-element discretization for torque computation of cage induction motors
Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines
Active control method for attenuation of torque vibrations in AC induction motor
A smart wireless sensor for the diagnosis of broken bars in induction motors
Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed Synchronous Motors
Unipolar flux in bearingless two-pole machine
Modeling two-pole cage induction machine equipped with embedded force actuator
Controlling rotor vibrations of two-pole induction machine under loaded operation
Calorimetric Measurement of Stator Core Losses
Synchronous torques of a cage induction motor from time-discretized finite element analysis
Numerical Investigation of the Effects of Loading and Slot Harmonics on the Core Losses of Induction Machines
A negative selection algorithm-based motor fault detection scheme
Eddy-current loss modeling for induction motor with a form-wound stator winding
Power balance for verifying torque computation within time-discretized finite-element analysis
Origin of parasitic time-periodic torques and forces in electrical machines
Electromechanical interaction in a synchronous reluctance machine
Permanent Magnets Models and Losses in 2D FEM Simulation of Electrical Machines
Use of high order harmonics for diagnosis of simultaneous faults via Wigner-Ville distributions
General formulation for the Newton-Raphson method and the fixed-point method in finite-element programs
Contribution of Maxwell stress in air on the deformations of induction machines
Simulated results and experimental verification of a novel magneto-mechanical coupled method
A hybrid PBIL-based harmony search method with application in wind generator optimization
A new harmony search method in optimal wind generator design
Resistive loss identification of an inverter-fed deep-bar induction motor
Thermal analysis of a high-speed PM machine using numerical and thermal-network method
Harmonic torque suppression by manual voltage injection
Circuit models for predicting core losses in the stator and rotor of a caged induction machine with sinusoidal supplies
Modeling the effect of inverter supply on eddy-current losses in synchronous machines
Application of TFD tools for the tracing of eccentricity-related components in induction machines
Diagnosis of stator short-circuits through Wigner-Ville transient-based analysis
Novel Mesurement Device for the Investigation of Magnetostriction in Electrical Machinery.
Identification of Rotor Resistive Loss Models for Cage Induction Motors
Finite-element discretisation for analysing eddy currents in the form-wound stator winding of a cage induction motor
Harmonic rotor vibration with control in a cage induction machine
Parameter estimation of synchronous machines by using the differential evolution algorithm
Suppression of rotor vibrations of an electric machine at the critical speed by optimal state feedback controller
Torque pulsations and magnetic field energy in permanent-magnet synchronous machines
On convergence problems of adaptive fir filter with lms algorithm
Complementary diagnosis of rotor asymmetries through the tracing of the right sideband component in the stator startup current
Mixed fault diagnosis in induction machines with stator parallel branches through the application of the DWT to the startup current
Origin of unbalanced-magnetic-pull components in electrical machines
Electromechanical Interaction in Rotordynamics of Electrical Machines an Overview
Optimum Supply for an Inverter-Fed Cage Induction Motor at Different Load Conditions
Self-bearing cage induction machine actuator in active control of rotor vibrations
Electromechanical interaction in eccentric-rotor cage induction machine equipped with a self-bearing force actuator
Calculation of Stator End-Winding Reactance of an Induction Machine Based on Magnetic Energy by 3-D Finite Element Analysis
3-D Finite Element Analysis of Magnetic Forces Exerted on Stator End-Winding of an Induction Motor
Parameter estimation for synchronous machines using numerical pulse test within finite element analysis
Magnetodynamic vector hysteresis model of ferromagnetic steel laminations
Active control of radial rotor vibrations in cage induction electrical machines by a built-in force actuator
Physical modeling, analysis and active model-based control of rotor vibrations in electric motors
Parameter estimation for induction motors to study the effects of voltage, frequency and slip
Mixed-Grade Pole Design for Permanent Magnet Synchronous Machines
Simulation as a means to test advanced control algorithms in suppressing rotor vibrations in electric machines
Sähkömoottorin roottorivärähtelyjen aktiivivaimennus
Validation of electromechanical rotor model for cage induction motors with parallel paths in stator windings
Effects of electromechanical faults on the airgap force distribution of induction motors
Numerical Analysis of Eddy-Current Losses in the Rotor of a High-Speed Synchronous Machine
Parameter estimation of induction machines using the numerical impulse method
Estimating the circuit models for a deep-bar induction motor using time harmonic finite element analysis
Induction and Permanent-Magnet Synchronous Machines for High-Speed Applications
Applying genetic algorithms to identify the parameters of a low-order force model for a salient-pole synchronous machine with eccentric rotor
A general scheme for induction motor condition monitoring
Electromagnetic Flux-based Condition Monitoring for Electrical Machines
Advanced Modeling of Doubly Fed Induction Generator Wind Turbine under Network Disturbance
Extraction of Circuit Parameters from Time Stepping FEM Computation for Coupled Field-Circuit Simulation
Inductance Model for Coupling Finite Element Analysis with Circuit Simulation
A comparative investigation on the reliability and accuracy of different diagnostic media when attempting to identify specific faults in an induction motor
Vizualising the results of numerical magnetic field analysis of electric machines, A147
Mass reduction of an AC inductor
Transient Analysis of Doubly Fed Power Induction Generator Using Coupled Field-Circuit Model
Analysis of a 1.7 MVA Doubly Fed Wind-Power Induction Generator during Power Systems Disturbances Power Systems Disturbances
Analysis of thermal fields in electrical machines using finite element method
Application of Low Order Parametric Force Model to Describe the Forces in Eccentric Rotor Synchronous Machine
Numerical identification of electromagnetic force parameters for linearized rotordynamic model of cage induction motors Numerical identification of electromagnetic force parameters for linearized roto
Induction Motor Stator Fault Detection Using Fuzzy Logic
Coupling pairwise support vector machines for fault classification
Dynamic Model of Cage Induction Motor Considering Saturation and Skin Effect
Effects of equalising currents on electromagnetic forces of whirling cage rotor
Electromagnetic circulatory forces and rotordynamic instability in electric machines
Modeling, Simulation and Signal Processing with Application to Electric Machine Fault Diagnostics and Condition Monitoring
Fault diagnostics of an electrical machine with multiple support vector classifiers
Support vector classification for fault diagnostics of an electrical machine
An Induction motor transient model in simulink including saturation and skin effect in rotor bars
Electromagnetic damping of stator vibrations in a cage induction motor
Thermal analysis of a permanent synchronous motor
Advanced finite element analysis with macro elements, replacing large meshes of eddy-current carrying windings in electromagnetic field computation
An electromechanical model for analysing transients in diesel-driven synchronous generators.
Local force calculation for vibration and noise analysis of a synchronous generator
Experience of an analysis program for generators and shaft systems at an energy, engineering and service company
Electromagnetic forces caused by cage induction motor
A study of measurement methods of the no-load losses in cage-induction motors
A compared analysis on no-load airgap magnetic field distribution in large output power permanent magnet synchronous motor
Finite element modeling of the magnetic field in asynchronous motors taking ferromagnetic hysteresis into account
Advanced utilisation of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines.
Modeling of eddy currents in the stator winding of an asynchronous machine using macro elements
Representation of skew in time-stepped 2D finite element model of induction machines using a multi-slice technique
Active Magnetic Bearing for High-Speed Electric Machines
Finite element analysis to assist condition monitoring of hydrogenerators
Finite element analysis for hydrogenerators
Vibration Model for Diesel-Driven Synchronous Generators
Radial Forces Calculation in a Synchronous Generator for Noise Analysis
High-Speed AC Motors
Comparison of a partly laminated squirrel cage rotor and a copper coated solid steel rotor for a 50 kW high-speed compressor
No-load Losses in Cage Induction Motors
Analysis of the electrical shift angle influence over a variable speed two-phase induction drive
"Demagnetisation State of Permanent Magnets in Large Output Power Permanrent Magnet Synchronous Motor
The Effect of Optimised Stator Slots and Rotor Configuration on Torque and Electromagnetic Losses in Permanent Magnet Synchronous Motor for Ship Propulsion Drive
Prediction of Airgap Magnetic Field Distribution in Large Output Power Permanent Magnet Synchronous Motor
The Influence of Optimised Stator Geometry and Rotor Configuration on Motor Characteristics in Permanent Magnet Synchronous Motor for Ship Propulsion Drive
Core loss estimation of a cage induction motor using the vector Preisach hysteresis model incorporated in finite element analysis
Effects of rotor slot opening modification on acoustic noise from induction machines
Effects of asymmetric rotor slot pitch on acoustic noise from induction machines
Hysteresis torque in a cage induction motor
Efficient magnetic-thermal coupled simulation of electrical machines using a double combined FEM-circuit approach
Rotary transformer for the excitation of synchronous machines
Development of an inverter fed two-phase variable speed induction motor drive
Permanent magnet synchronous motor for ship propulsion drive
Permanent magnet synchronous motor for ship propulsion drive
Permanent magnet synchronous motor for ship propulsion drive
Contribution to the finite element analysis of eddy-currents ain multi-conductor windings surrounded by magnetically non-linear media
High speed AC motors
Validity of conventional and modern methods of no-load loss calculation in asynchronous machines - statistic approach
Variable speed induction motor drive for household refrigerator compressor
Losses in inverter-fed cage induction motors
Unbalanced magnetic pull in cage induction motors dynamic and static eccentricity
Study of electrical machines, using a new interactive finite element preprocessor
High speed AC motors
High-speed AC machines
Calculation of hysteresis losses by the Preisach model within finite element analysis
Calculation of hysteresis losses by the Preisach model within finite element analysis
Investigation of electrical machines by using a new interactive finite element preprocessorin unix x-window environment
Unbalanced magnetic pull in a four-pole induction motor with an odd number of rotor slots
Design and analysis of electrical motors for a hybrid electric vehicle
Cooling of a 100 000 RPM electrical motor
Unbalanced magnetic pull in a high-speed induction motor with an eccentric ortor
Finite element analysis of the magnetic forces acting on an eccentric rotor of a high-speed induction motor
Losses in high-speed asynchronous motors
Rotor-slot design for inverter-fed cage induction motors
On the choise of the number of rotor slots for inverter-fed cage induction motors
Estimation of losses in cage induction motors using finite element techniques
Finite Element Modelling of Additional Losses Due to Galvanic Contacts on Edges of Lamination Stacks
Effect of Manufacturing on Stator Core Losses
Scientific books (monographs)
Book (editor)Suurnopeustekniikka - High Speed Technology in Finland
Larjola, Jaakko; Arkkio, Antero; Pyrhönen, Juha2010 ISBN: 978-952-214-949-7Publications intended for professional communities
Article in professional journalNumerical analysis of eddy-current losses in the rotor of a high-speed synchronous machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2007 in PRZEGLAD ELEKTROTECHNICZNY (Wydawnictwo SIGMA - N O T Sp. z o.o.)Properties of Electrical Steel Sheets Under Strong Mechanical Stress
Fonteyn, Katarzyna; Belahcen, Anouar; Arkkio, Antero2006 in An International Journal for Engineering and Information Sciences (Wydawnictwo SIGMA - N O T Sp. z o.o.)Article in professional conference proceedingsModels of magnetic anisotropy for non oriented steel sheets dedicated to finite element method
Martin, Floran; Singh, Deepak; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2015 Effect of Static Stress on Iron Loss in a Synchronous Reluctance Machine
Singh, Deepak; Rasilo, Paavo; Martin, Floran; Belahcen, Anouar; Arkkio, Antero2015 Published development or research reportPower limits of high-speed permanent-magnet electrical machines for compressor applications
Kolondzovski, Zlatko; Arkkio, Antero; Larjola, Jaakko; Sallinen, Petri2010 Finite-element analysis for a rolling-rotor electrical machine
Arkkio, Antero; Biernat, Adam; Bucki, Bogdan; Kaminski, Gregorz; Niemenmaa, Asko; Smak, Andrzej; Staszewski, Pawel2009 Dependence of hysteresis and eddy-current losses on the excitation frequency and the analysis of losses in inverter-fed electric machines
Dlala, Emad; Belahcen, Anouar; Pippuri, Jenni; Arkkio, Antero2009 Unified Scheme for Implementing the Fixed-Point and Newton-Raphson Methods in Finite-Element Programs of Electromagnetic Field Problems
Dlala, Emad; Arkkio, Antero2009 On the Importance of Incorporating Iron Losses in the Magnetic Field Solution of Electrical Machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2009 FEM for directly coupled magneto-mechanical phenomena in electrical machinesKatarzyna
Fonteyn, Katarzyna; Belahcen, Anouar; Kouhia, Reijo; Arkkio, Antero2009 Eddy-current Losses and Temperature Rise in the Form-wound Stator Winding of an Inverter-fed Cage Induction Motor
Huynh Van, Khang; Islam, M.Jahirul; Repo, Anna-Kaisa; Arkkio, Antero2009 Finite-element analysis of eddy currents in the form-wound stator and rotor winding of a doubly-fed induction generator
Islam, M.Jahirul; Arkkio, Antero2009 Axial Magnetic Flux and Eddy-Current Loss in Core Ends of a Large Induction Machine
Lin, Ranran; Haavisto, Ari; Arkkio, Antero2009 Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Niemenmaa, Asko; Salmia, Lauri; Arkkio, Antero; Saari, Juha2009 Inclusion of Eddy Currents in Laminations in Two-Dimensional Finite Element Analysis
Pippuri, Jenni; Belahcen, Anouar; Dlala, Emad; Arkkio, Antero2009 A Mesh-Free Model of Eddy-Current Losses for 2D Analysis of Ferromagnetic Laminations
Rasilo, Paavo; Arkkio, Antero2009 Finite-element discretiztion for analyzing eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2008 Challenges in the segregation of losses in cage induction machines
Pippuri, Jenni; Arkkio, Antero2008 Active Magnetic Bearings
Arkkio, Antero; Lantto, Erkki; Tommila, Ville2007 Comprehensive Dynamic Loss-Model of Electrical Steel Applied to FE Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2007 Mitigation of UMP Components by the Parallel Stator Windings in Eccentric-rotor Electrical Machines
Burakov, Andrej; Arkkio, Antero2007 A Fast Fixed-Point Method for Solving Nonlinear Field Problems in Time-Stepping Analysis
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Vibrations of Electrical Machines
Holopainen, Timo; Roivainen, Janne; Nordmann, Rainer; Arkkio, Antero2007 Identification of electromagnetic torque model for induction machines with numerical magnetic field solution
Repo, Anna-Kaisa; Rasilo, Paavo; Niemenmaa, Asko; Arkkio, Antero2007 Laboratory of Electromechanics, Annual Report 2006
Schröder, Marika; Arkkio, Antero2007 Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines
Antonino-Daviu, Jose; Jover Rodríguez, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose2006 Coupled Field-Circuit Problems in Electric Power Engineering
Arkkio, Antero; Kanerva, Sami; Repo, Anna-Kaisa; Szucs, Aron2006 Local Magneto-Mechanical Coupling in Electrical Machines
Belahcen, Anouar; Arkkio, Antero2006 Validity of Numerical Impulse Response Test in Studying Unbalanced Magnetic Pull in Electrical Machines with Parallel Stator Windings
Burakov, Andrej; Arkkio, Antero2006 Analysis of Hysteresis Torque in a High-Speed Induction Motor
Dlala, Emad; Arkkio, Antero2006 Circulating currents in the parallel stator conductors of Electrical machines
Islam, Mohammad Jahirul; Arkkio, Antero2006 A simplified online technique for the detection of eccentricity in induction motors
Jover Rodriguez, Pedro; Antonino-Daviu, Jose; Muñoz, Enrique; Arkkio, Antero2006 Numerical Calculation of Eddy-Current Losses for Different Rotor Structures of High-Speed Permanent Magnet Machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2006 A comparative investigation of electrical parameters for fault detection and condition monitoring in induction motors - stator winding current and electromagnetic flux
Negrea, Marian; Jover, Pedro; Arkkio, Antero2006 Combined 2D - 1D Time-Harmonic Model for Analysis of Rotating Electrical Machines
Pippuri, Jenni; Arkkio, Antero2006 Fault Diagnostics for Electrical Machines
Arkkio, Antero; Hyötyniemi, Heikki; Jover, Pedro; Kokko, Voitto; Lindh, Tuomo; Negrea, Marian2005 A Neuro-Fuzzy-Based Preisach Approach on Hysteresis Modeling
Dlala, Emad; Arkkio, Antero2005 Losses, Cooling and Thermal Analysis of Electrical Machines
Downing, Scott; Reunanen, Arttu; Saari, Juha; Arkkio, Antero2005 A simplified predictive filter-fuzzy logic method for induction motor condition monitoring
Jover, Pedro; Negrea, Marian; Arkkio, Antero; Muñoz, Enrique2005 Electromechanical Interactions in Electrical Machines
Arkkio, Antero; Belahcen, Anouar; Holopainen, Timo; Kurronen, Panu; Laurila, Lasse; Saren, Hannu; Sopanen, Jussi2004 Modelling of Magnetic Materials
Arkkio, Antero; Belahcen, Anouar; Ivanyi, Amalia; Saitz, Julius; Suorsa, Ilkka2004 Vibration measurements for validation of electromechanical rotor model for cage induction motor Vibration measurements for validation of electromechanical rotor model for cage induction motor
Holopainen, Timo; Aatola, Seppo; Arkkio, Antero2004 Mechanical Model for Study Induction Motor Under Fault Condition
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Mechanical Model to Study Induction Motor Under Fault Conditions
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Frequency-Dependence of Magnetisation of a Slip-Ring Induction Generator
Lin, Ranran; Arkkio, Antero2004 An Analytical Model of Slip-Ring Induction Machines Including Magnetic Saturation and Rotor Position Angle
Pippuri, Jenni; Arkkio, Antero2004 Combined solution of electromagnetic field and circuit equations in modelling the exitation control of synchronous generator
Repo, Anna-Kaisa; Arkkio, Antero2004 Simulation of Electric Drive Systems with Coupled Finite Element Analysis and System Simulator
Kanerva, Sami; Seman, Slavomir; Arkkio, Antero2003 Effects of saturation on the forces in induction motors with whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 Design of Synchronous PM Motor for Submersed Marine Propulsion Systems
Arkkio, Antero; Bianchi, Nicola; Bolognani, Silverio; Jokinen, Tapani; Luise, F.; Rosu, Marius2002 Electromechanical interaction in rotor vibrations of electric machines
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2002 Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Pöyhönen, S.; Negrea, M.; Jover, P.; Arkkio, A.; Hyötyniemi, H.2002 Comparison of reconstruction schemes of multiple SVM s applied to fault classification of a cage induction motor
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.2002 Spatial linearity of unbalanced magnetic pull in induction motors during eccentric rotor motions
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Numerical identification of the electromagnetic force parameters for cage rotor from impule response
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Mekatronisten järjestelmien mallinnus ja simulointi tuotekehityksen ja kunnonvalvonnan tarpeisiin
Holopainen, T.; Arkkio, A.; Scholliers, J.; Vessonen, I.2001 Generalisation of magnetic properties modeling to hard magnetic materials
Rosu, Marius; Arkkio, Antero; Jokinen, Tapani2001 Adcanced utilization of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines
Szücs, Áron; Arkkio, Antero; Jokinen, Tapani2001 Newton Raphson iteration using the finite element method and the elimination of inner nodes for the consideration of eddy-currents in multi-conductor windings
Szücs, A.; Arkkio, A.1998 A new technique for the consideration of eddy-currents in multi-conductor windings using the finite element method
Szücs, Á.; Arkkio, A.1998 Vaihtosähkökoneiden yliaaltoilmiöt
Jokinen, T.; Perho, J.; Niemenmaa, A.; Arkkio, A.1995 Eddy-current losses in the stator winding of cage induction motors
Yatchev, I.; Arkkio, A.; Niemenmaa, A.1995 Patents and invention disclosures
PatentInductor
Arkkio, Antero; Saitz, J.; Virolainen, P.2004 Acinhronnaya electritseckaya machina
Arkkio, Antero1999 Asynchronous Electric Machine and Rotor and Stator for use in Associations there with
Arkkio, Antero1997 Rotor Construction in an Asynchronous Electric Machine
Arkkio, Antero; Lindgren, O.1997 Epätahti sähkökone ja sen yhteydessä käytettävät roottori ja staattori
Arkkio, A.1994
Suurnopeustekniikka - High Speed Technology in Finland
Numerical analysis of eddy-current losses in the rotor of a high-speed synchronous machine
Properties of Electrical Steel Sheets Under Strong Mechanical Stress
Article in professional conference proceedingsModels of magnetic anisotropy for non oriented steel sheets dedicated to finite element method
Martin, Floran; Singh, Deepak; Rasilo, Paavo; Belahcen, Anouar; Arkkio, Antero2015 Effect of Static Stress on Iron Loss in a Synchronous Reluctance Machine
Singh, Deepak; Rasilo, Paavo; Martin, Floran; Belahcen, Anouar; Arkkio, Antero2015 Published development or research reportPower limits of high-speed permanent-magnet electrical machines for compressor applications
Kolondzovski, Zlatko; Arkkio, Antero; Larjola, Jaakko; Sallinen, Petri2010 Finite-element analysis for a rolling-rotor electrical machine
Arkkio, Antero; Biernat, Adam; Bucki, Bogdan; Kaminski, Gregorz; Niemenmaa, Asko; Smak, Andrzej; Staszewski, Pawel2009 Dependence of hysteresis and eddy-current losses on the excitation frequency and the analysis of losses in inverter-fed electric machines
Dlala, Emad; Belahcen, Anouar; Pippuri, Jenni; Arkkio, Antero2009 Unified Scheme for Implementing the Fixed-Point and Newton-Raphson Methods in Finite-Element Programs of Electromagnetic Field Problems
Dlala, Emad; Arkkio, Antero2009 On the Importance of Incorporating Iron Losses in the Magnetic Field Solution of Electrical Machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2009 FEM for directly coupled magneto-mechanical phenomena in electrical machinesKatarzyna
Fonteyn, Katarzyna; Belahcen, Anouar; Kouhia, Reijo; Arkkio, Antero2009 Eddy-current Losses and Temperature Rise in the Form-wound Stator Winding of an Inverter-fed Cage Induction Motor
Huynh Van, Khang; Islam, M.Jahirul; Repo, Anna-Kaisa; Arkkio, Antero2009 Finite-element analysis of eddy currents in the form-wound stator and rotor winding of a doubly-fed induction generator
Islam, M.Jahirul; Arkkio, Antero2009 Axial Magnetic Flux and Eddy-Current Loss in Core Ends of a Large Induction Machine
Lin, Ranran; Haavisto, Ari; Arkkio, Antero2009 Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Niemenmaa, Asko; Salmia, Lauri; Arkkio, Antero; Saari, Juha2009 Inclusion of Eddy Currents in Laminations in Two-Dimensional Finite Element Analysis
Pippuri, Jenni; Belahcen, Anouar; Dlala, Emad; Arkkio, Antero2009 A Mesh-Free Model of Eddy-Current Losses for 2D Analysis of Ferromagnetic Laminations
Rasilo, Paavo; Arkkio, Antero2009 Finite-element discretiztion for analyzing eddy currents in the form-wound stator winding of a cage induction motor
Islam, Mohammad Jahirul; Arkkio, Antero2008 Challenges in the segregation of losses in cage induction machines
Pippuri, Jenni; Arkkio, Antero2008 Active Magnetic Bearings
Arkkio, Antero; Lantto, Erkki; Tommila, Ville2007 Comprehensive Dynamic Loss-Model of Electrical Steel Applied to FE Simulation of Electrical Machines
Belahcen, Anouar; Arkkio, Antero2007 Mitigation of UMP Components by the Parallel Stator Windings in Eccentric-rotor Electrical Machines
Burakov, Andrej; Arkkio, Antero2007 A Fast Fixed-Point Method for Solving Nonlinear Field Problems in Time-Stepping Analysis
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Dlala, Emad; Belahcen, Anouar; Arkkio, Antero2007 Vibrations of Electrical Machines
Holopainen, Timo; Roivainen, Janne; Nordmann, Rainer; Arkkio, Antero2007 Identification of electromagnetic torque model for induction machines with numerical magnetic field solution
Repo, Anna-Kaisa; Rasilo, Paavo; Niemenmaa, Asko; Arkkio, Antero2007 Laboratory of Electromechanics, Annual Report 2006
Schröder, Marika; Arkkio, Antero2007 Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines
Antonino-Daviu, Jose; Jover Rodríguez, Pedro; Riera-Guasp, Martin; Arkkio, Antero; Roger-Folch, Jose2006 Coupled Field-Circuit Problems in Electric Power Engineering
Arkkio, Antero; Kanerva, Sami; Repo, Anna-Kaisa; Szucs, Aron2006 Local Magneto-Mechanical Coupling in Electrical Machines
Belahcen, Anouar; Arkkio, Antero2006 Validity of Numerical Impulse Response Test in Studying Unbalanced Magnetic Pull in Electrical Machines with Parallel Stator Windings
Burakov, Andrej; Arkkio, Antero2006 Analysis of Hysteresis Torque in a High-Speed Induction Motor
Dlala, Emad; Arkkio, Antero2006 Circulating currents in the parallel stator conductors of Electrical machines
Islam, Mohammad Jahirul; Arkkio, Antero2006 A simplified online technique for the detection of eccentricity in induction motors
Jover Rodriguez, Pedro; Antonino-Daviu, Jose; Muñoz, Enrique; Arkkio, Antero2006 Numerical Calculation of Eddy-Current Losses for Different Rotor Structures of High-Speed Permanent Magnet Machine
Kolondzovski, Zlatko; Belahcen, Anouar; Arkkio, Antero2006 A comparative investigation of electrical parameters for fault detection and condition monitoring in induction motors - stator winding current and electromagnetic flux
Negrea, Marian; Jover, Pedro; Arkkio, Antero2006 Combined 2D - 1D Time-Harmonic Model for Analysis of Rotating Electrical Machines
Pippuri, Jenni; Arkkio, Antero2006 Fault Diagnostics for Electrical Machines
Arkkio, Antero; Hyötyniemi, Heikki; Jover, Pedro; Kokko, Voitto; Lindh, Tuomo; Negrea, Marian2005 A Neuro-Fuzzy-Based Preisach Approach on Hysteresis Modeling
Dlala, Emad; Arkkio, Antero2005 Losses, Cooling and Thermal Analysis of Electrical Machines
Downing, Scott; Reunanen, Arttu; Saari, Juha; Arkkio, Antero2005 A simplified predictive filter-fuzzy logic method for induction motor condition monitoring
Jover, Pedro; Negrea, Marian; Arkkio, Antero; Muñoz, Enrique2005 Electromechanical Interactions in Electrical Machines
Arkkio, Antero; Belahcen, Anouar; Holopainen, Timo; Kurronen, Panu; Laurila, Lasse; Saren, Hannu; Sopanen, Jussi2004 Modelling of Magnetic Materials
Arkkio, Antero; Belahcen, Anouar; Ivanyi, Amalia; Saitz, Julius; Suorsa, Ilkka2004 Vibration measurements for validation of electromechanical rotor model for cage induction motor Vibration measurements for validation of electromechanical rotor model for cage induction motor
Holopainen, Timo; Aatola, Seppo; Arkkio, Antero2004 Mechanical Model for Study Induction Motor Under Fault Condition
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Mechanical Model to Study Induction Motor Under Fault Conditions
Jover, Pedro; Negrea, Marian; Arkkio, Antero2004 Frequency-Dependence of Magnetisation of a Slip-Ring Induction Generator
Lin, Ranran; Arkkio, Antero2004 An Analytical Model of Slip-Ring Induction Machines Including Magnetic Saturation and Rotor Position Angle
Pippuri, Jenni; Arkkio, Antero2004 Combined solution of electromagnetic field and circuit equations in modelling the exitation control of synchronous generator
Repo, Anna-Kaisa; Arkkio, Antero2004 Simulation of Electric Drive Systems with Coupled Finite Element Analysis and System Simulator
Kanerva, Sami; Seman, Slavomir; Arkkio, Antero2003 Effects of saturation on the forces in induction motors with whirling cage rotor
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2003 Design of Synchronous PM Motor for Submersed Marine Propulsion Systems
Arkkio, Antero; Bianchi, Nicola; Bolognani, Silverio; Jokinen, Tapani; Luise, F.; Rosu, Marius2002 Electromechanical interaction in rotor vibrations of electric machines
Holopainen, Timo; Tenhunen, Asmo; Arkkio, Antero2002 Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Pöyhönen, S.; Negrea, M.; Jover, P.; Arkkio, A.; Hyötyniemi, H.2002 Comparison of reconstruction schemes of multiple SVM s applied to fault classification of a cage induction motor
Pöyhönen, S.; Negrea, M.; Arkkio, A.; Hyötyniemi, H.2002 Spatial linearity of unbalanced magnetic pull in induction motors during eccentric rotor motions
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Numerical identification of the electromagnetic force parameters for cage rotor from impule response
Tenhunen, Asmo; Holopainen, Timo; Arkkio, Antero2002 Mekatronisten järjestelmien mallinnus ja simulointi tuotekehityksen ja kunnonvalvonnan tarpeisiin
Holopainen, T.; Arkkio, A.; Scholliers, J.; Vessonen, I.2001 Generalisation of magnetic properties modeling to hard magnetic materials
Rosu, Marius; Arkkio, Antero; Jokinen, Tapani2001 Adcanced utilization of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines
Szücs, Áron; Arkkio, Antero; Jokinen, Tapani2001 Newton Raphson iteration using the finite element method and the elimination of inner nodes for the consideration of eddy-currents in multi-conductor windings
Szücs, A.; Arkkio, A.1998 A new technique for the consideration of eddy-currents in multi-conductor windings using the finite element method
Szücs, Á.; Arkkio, A.1998 Vaihtosähkökoneiden yliaaltoilmiöt
Jokinen, T.; Perho, J.; Niemenmaa, A.; Arkkio, A.1995 Eddy-current losses in the stator winding of cage induction motors
Yatchev, I.; Arkkio, A.; Niemenmaa, A.1995 Patents and invention disclosures
PatentInductor
Arkkio, Antero; Saitz, J.; Virolainen, P.2004 Acinhronnaya electritseckaya machina
Arkkio, Antero1999 Asynchronous Electric Machine and Rotor and Stator for use in Associations there with
Arkkio, Antero1997 Rotor Construction in an Asynchronous Electric Machine
Arkkio, Antero; Lindgren, O.1997 Epätahti sähkökone ja sen yhteydessä käytettävät roottori ja staattori
Arkkio, A.1994
Models of magnetic anisotropy for non oriented steel sheets dedicated to finite element method
Effect of Static Stress on Iron Loss in a Synchronous Reluctance Machine
Power limits of high-speed permanent-magnet electrical machines for compressor applications
Finite-element analysis for a rolling-rotor electrical machine
Dependence of hysteresis and eddy-current losses on the excitation frequency and the analysis of losses in inverter-fed electric machines
Unified Scheme for Implementing the Fixed-Point and Newton-Raphson Methods in Finite-Element Programs of Electromagnetic Field Problems
On the Importance of Incorporating Iron Losses in the Magnetic Field Solution of Electrical Machines
FEM for directly coupled magneto-mechanical phenomena in electrical machinesKatarzyna
Eddy-current Losses and Temperature Rise in the Form-wound Stator Winding of an Inverter-fed Cage Induction Motor
Finite-element analysis of eddy currents in the form-wound stator and rotor winding of a doubly-fed induction generator
Axial Magnetic Flux and Eddy-Current Loss in Core Ends of a Large Induction Machine
Modelling motion, stiffness and damping of a permanent-magnet shaft coupling
Inclusion of Eddy Currents in Laminations in Two-Dimensional Finite Element Analysis
A Mesh-Free Model of Eddy-Current Losses for 2D Analysis of Ferromagnetic Laminations
Finite-element discretiztion for analyzing eddy currents in the form-wound stator winding of a cage induction motor
Challenges in the segregation of losses in cage induction machines
Active Magnetic Bearings
Comprehensive Dynamic Loss-Model of Electrical Steel Applied to FE Simulation of Electrical Machines
Mitigation of UMP Components by the Parallel Stator Windings in Eccentric-rotor Electrical Machines
A Fast Fixed-Point Method for Solving Nonlinear Field Problems in Time-Stepping Analysis
Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines
Vibrations of Electrical Machines
Identification of electromagnetic torque model for induction machines with numerical magnetic field solution
Laboratory of Electromechanics, Annual Report 2006
Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines
Coupled Field-Circuit Problems in Electric Power Engineering
Local Magneto-Mechanical Coupling in Electrical Machines
Validity of Numerical Impulse Response Test in Studying Unbalanced Magnetic Pull in Electrical Machines with Parallel Stator Windings
Analysis of Hysteresis Torque in a High-Speed Induction Motor
Circulating currents in the parallel stator conductors of Electrical machines
A simplified online technique for the detection of eccentricity in induction motors
Numerical Calculation of Eddy-Current Losses for Different Rotor Structures of High-Speed Permanent Magnet Machine
A comparative investigation of electrical parameters for fault detection and condition monitoring in induction motors - stator winding current and electromagnetic flux
Combined 2D - 1D Time-Harmonic Model for Analysis of Rotating Electrical Machines
Fault Diagnostics for Electrical Machines
A Neuro-Fuzzy-Based Preisach Approach on Hysteresis Modeling
Losses, Cooling and Thermal Analysis of Electrical Machines
A simplified predictive filter-fuzzy logic method for induction motor condition monitoring
Electromechanical Interactions in Electrical Machines
Modelling of Magnetic Materials
Vibration measurements for validation of electromechanical rotor model for cage induction motor Vibration measurements for validation of electromechanical rotor model for cage induction motor
Mechanical Model for Study Induction Motor Under Fault Condition
Mechanical Model to Study Induction Motor Under Fault Conditions
Frequency-Dependence of Magnetisation of a Slip-Ring Induction Generator
An Analytical Model of Slip-Ring Induction Machines Including Magnetic Saturation and Rotor Position Angle
Combined solution of electromagnetic field and circuit equations in modelling the exitation control of synchronous generator
Simulation of Electric Drive Systems with Coupled Finite Element Analysis and System Simulator
Effects of saturation on the forces in induction motors with whirling cage rotor
Design of Synchronous PM Motor for Submersed Marine Propulsion Systems
Electromechanical interaction in rotor vibrations of electric machines
Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines
Comparison of reconstruction schemes of multiple SVM s applied to fault classification of a cage induction motor
Spatial linearity of unbalanced magnetic pull in induction motors during eccentric rotor motions
Numerical identification of the electromagnetic force parameters for cage rotor from impule response
Mekatronisten järjestelmien mallinnus ja simulointi tuotekehityksen ja kunnonvalvonnan tarpeisiin
Generalisation of magnetic properties modeling to hard magnetic materials
Adcanced utilization of macro elements that replace the multi-conductor windings in the finite element analysis of rotating electrical machines
Newton Raphson iteration using the finite element method and the elimination of inner nodes for the consideration of eddy-currents in multi-conductor windings
A new technique for the consideration of eddy-currents in multi-conductor windings using the finite element method
Vaihtosähkökoneiden yliaaltoilmiöt
Eddy-current losses in the stator winding of cage induction motors
Patents and invention disclosures
PatentInductor
Arkkio, Antero; Saitz, J.; Virolainen, P.2004 Acinhronnaya electritseckaya machina
Arkkio, Antero1999 Asynchronous Electric Machine and Rotor and Stator for use in Associations there with
Arkkio, Antero1997 Rotor Construction in an Asynchronous Electric Machine
Arkkio, Antero; Lindgren, O.1997 Epätahti sähkökone ja sen yhteydessä käytettävät roottori ja staattori
Arkkio, A.1994
Inductor
Acinhronnaya electritseckaya machina
Asynchronous Electric Machine and Rotor and Stator for use in Associations there with
Rotor Construction in an Asynchronous Electric Machine
Epätahti sähkökone ja sen yhteydessä käytettävät roottori ja staattori
Read about executive education
Other experts
Diana Clarke
I have over 25 years experience in broad range of people development functions, in-company and consulting. Founding partner and manager of Madrid-based consulting firm Managers Studio, focused on providing competence diagnosis tools and development solutions for team managers at various levels of...
Kristina Diekmann
Dr. Kristina ‘Tina’ Diekmann is Chair of the Department of Management, Professor of Management and David Eccles Professor of Business Ethics at The University of Utah David Eccles School of Business.Prior to joining the faculty at the U, she was an assistant professor at the University of Notre D...
Popular Courses
The Positive Leader: Deep Change and Organizational Transformation
Stephen M. Ross School of Business
Ann Arbor, Michigan, United States
Jun 23
The Manchester Leadership Development Programme
Alliance Manchester Business School
Manchester, United Kingdom
Jul 1
Leading Digital Transformation
ESMT
Berlin, Germany
May 28
Leading Strategic Growth and Change
Columbia Business School
New York, New York, United States
Jun 10
Private Equity: Investing and Creating Value
The Wharton School
Philadelphia, Pennsylvania, United States
Sep 8
Leading People and Teams
ESMT
Berlin, Germany
May 28
Looking for an expert?
Contact us and we'll find the best option for you.