Oil and Gas

ICTD International Centre for Training and Development

Corrosion in the Oil and Gas Industry

Geology and Geochemistry of Oil and Gas

This intensive five-day course will be about the application of Project Management techniques and knowledge for the effective estimating, planning, managing, and control of a project.  This course will extend to the identification, assessment, and control of qualitative risks in the project-based...

Project Management in Oil and Gas Fields

Fundamentals of Industrial Coatings & Non Metallic Materials Application in Oil and Gas Industries

Well completion is considered to be one of the most critical practices for reservoir exploitation and management. During this process, the responsible personnel is tasked to optimally design and install a system that can deliver its full potential to optimize oil, gas and production without...

Successful Well Completion and Workover Practices: a Practical Approach From Design to Field Operations

This five-day training course is essential for marine terminal personnel. All applicable marine terminal regulations (current & proposed) and policies pertaining to marine transfer operations and spill contingency planning will be discussed. Delegates will receive a solid foundation of the...

Oil & Gas Marine Terminals: Operations & Management

The dust and fumes put into air by much industrial process create an environment which is classified as electrically hazardous. Processing plants in petrochemicals and oil & gas field’s requirements for the selection of electrical equipment to suit the area classification. The course provide...

Electrical Safety and Hazardous Area Classification in the Petrochemical Industry

Individuals involved in any aspect of sourcing, tendering, selecting, forming and executing contracts with suppliers of goods and services to the oil and gas industry. This includes supply chain roles such as contracting and procurement specialists, sourcing specialists, category managers, and...

Contracts and Tender Fundamentals

This program develops an essential understanding of Oil & Gas Exploration & Production (E&P) accounting, reporting and performance measurement issues and practices. It develops your ability to prepare, use and critically evaluate information on E&P activities, applying specialist industry...

Oil & Gas Accounting & Performance Measurement

This 5 days course applies the fundamental instrumentation and control engineering principles to oil and gas facilities design and operation and is designed for Facilities personnel with or without a background in instrumentation or control engineering. The course is also designed to accelerate...

Instrumentation and Controls Fundamentals for Facilities Personnel

Handling and disposal of wastes generated in oil and gas exploration and production has received significant attention in recent years. This heightened interest has been a result of the public and regulatory agencies focus on environmental protection. Because of this, the oil industry has...

Hazardous & Non Hazardous Waste Management in Oil & Gas Industry

Basic Electrical Engineering Fundamentals Course provides a comprehensive exposition of the principles of electrical engineering for both electrical as well as non-electrical engineers. This course is designed to help electric power system engineers understand basic industrial, commercial and...

Electrical Engineering Fundamentals for Facilities Personnel

Facility Electrical Engineering for Supervisors is a course that introduces electrical engineering principles as applied to oil and gas facilities operation without the need for formal electrical engineering training. Through the use of individual and team problem solving you will learn about...

Facility Electrical Engineering for Supervisory Personnel

This five-day course represents the core of our reservoir engineering program and the foundation for all future studies in this subject. Numerous engineering practices are covered, ranging from fluid and rock properties to simulation and field development planning. Proficiency in using Microsoft...

Applied Integrated Reservoir Engineering and Geochemical Approach

This course presents to the attendees the basics. The course covers description and definition of hydrocarbon mixture properties, characterization parameters and their significance in design of equipment. Basic calculation procedures for design and rating of process equipment are discussed, with...

Equipment Sizing and Selection (vessels, Pumps, Fans, Blowers, Compressors)

This course is designed to help companies award the right contracts to the best providers. Contracting involves many roles that must work together to negotiate, document, and ensure a reliable supply of goods and services for capital projects and ongoing operations. Everyone involved in...

Tendering & Contracting

This course will provide a broad overview of hazardous area classifications and the types of protection techniques involved. When electrical equipment is used in, around, or near an atmosphere that has flammable gases or vapors, flammable liquids, combustible dusts, ignitable fibers or flying,...

Hazardous Area Classification and Control of Ignition Sources

Piping systems are like arteries and veins. They carry the lifeblood of modern civilization. Piping is a major expenditure in the design and construction of industrial, refinery, petrochemical or power-generating plants when one considers engineering costs, material costs, and fabrication and...

Design & Fabrication of Piping Systems & Code Requirements

The course assumes no logging knowledge and seeks to establish an understanding of basic petrophysical measurements and interpretation techniques which can be applied to routine tasks, and upon which more complex and advanced information and interpretive techniques can be built.

The course...

Basic Well log Analysis

Industry facilities that store, manufacture, transport, recycle or handle dangerous goods, hazardous wastes, or hazardous chemicals should prepare a response (contingency) plan to respond to emergencies involving the accidental release of these substances into the environment. Such facilities...

Emergency Response Plan for Gas Plant

This course covers the parts and components of different types of valves; the methods of operation and maintenance; the troubleshooting and maintenance used in valves. This course will explain the main types of manual and control valves and their actuators; This course is designed to give...

Practical Valve Technology: Selection, Installation, Upgrading, Inspection, Troubleshooting

Winston Churchill said, "A plan is nothing. Planning is everything." What one may see as a plan for developing power systems may have little or no value if the conditions and assumptions for the plan do not hold true. This applies even more so today in the era of open access, re-regulation, power...

Electrical Power System Planning

This five-day course is primarily designed for drilling, production and completion engineers and supervisors needing a practical understanding and an appreciation of well completion design and operation, well stimulation and work over planning. It explains how completion configurations are varied...

Well Completion Design, Operation, Well Stimulation, Testing and Workover Planning

Pumps and compressors find extensive use in petrochemical process plants, water circulation systems, A/C and heating systems, and many other applications. Understanding of how to operate the pumps & Compressors correctly as well as knowing the appropriate maintenance and troubleshooting methods...

Pumps and Compressors: Operation, Maintenance & Troubleshooting

Input/output devices are the interface between the controller and the controlled system. Input devices convert physical quantities to electrical signals, while output devices allow the controller to act on the system. The electronic brains in control systems depend on a network of input/output...

Control Components (Transducer & Sensors)

Your supply chain is only as strong as its weakest link.  The most vulnerable points in complex global supply chains are the links with suppliers and vendors.  Identifying and strengthening those links is critical to protecting your credibility and reputation – particularly in the oil and gas...

Supplier Positioning

In oil and gas industry, plant operation involves long hours, large equipments and sometime hazardous materials. Major hazard incidents which involve the release of hazardous process material from plants have the potential to kill people and also damage the environment. This course intends to...

Safety & Risk Management in Onshore Operation and Prediction

The design of a pipeline program remains the most important factor in the success of the project. This highly technical training program is intended to teach participants how best to design pipelines given different considerations.

Participants will learn how to assimilate the environment, types...

Pipeline Design and Integrity Engineering

This five-day course will expose participants to the terminology, concepts, processes, and equipment used to drill oil and gas wells. The planning process followed by drilling engineers will be covered to the extent that participants will understand the process and be able to initiate a well plan...

Applied Drilling Engineering

The SCADA is being extensively used in oil and gas, petrochemicals, power, steel and cement manufacturing/ production, packing, raw material processing etc. for monitoring, operation, alarms and sequence of events recording, database management, reports and logs etc. These are operated either in...

SCADA & Communications Standards

Steel is the most used construction material in the USA for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable characteristics including high strength, high stiffness, ductility and toughness, speed...

Structural Steel Design (Pipe Rack, Shelters, Pipe Supports, Platforms and Ladders)

This course covers   fundamentals of Final Control Element including what is a Final Control Element? , control valve types, control valve components , control valve accessories and control valve applications  employed in a number of common control applications including compressors, boilers,...

Control Valve Types, Function, Selection and Maintenance

This seminar is aimed at both suppliers and buyers who need an overview of the key drivers involved when viewing supply chains from a logistics/demand point of view. The purpose of this seminar is to explain and appreciate what logistics and supply chain management are fundamentally about so that...

Developing a Logistics Strategy

This course provides a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps.  This includes piston pumps, plunger pumps, rotary pumps, screw pumps, two- and three-lobe pumps, cam pumps, vane pumps, bellows-type metering pumps, diaphragm pumps, canned...

Pumps, Mechanical Inspection & Troubleshooting

This course introduces the practices of controls systems and safety controls for industrial steam generating boilers.

 It focuses on the control and safety requirements applicable to most types of boilers from small gas-fired units to large multi-fuel installations. The workshop will provide...

Boiler Control and Instrumentation for Engineers & Technicians

Electric power systems are designed to serve loads in a safe and reliable manner. One of the major considerations in the design of any power network is adequate control of short-circuits or “faults” as they are generally referred to. If faults are not controlled they can cause unnecessary loss of...

Generator and Transformer Protection

The purpose of this training course is to establish minimum standards to prevent hazardous electrical exposures to personnel and ensure compliance with regulatory requirements applicable to electrical systems. Working on the equipment in a de-energized state is required unless de-energizing...

Introduction to the Safe Operation of High Power Systems

Practical Pump Technology: Selection, Operation & Maintenance

This course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil and gas plants and petrochemical plants.

Principal emphasis is placed on the primary means of achieving plant integrity, which is the prevention of pressure...

Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plants

To successfully inspect and test electrical equipment, Electrical personnel must first fully understand the technology of the electrical equipment. After the successful start-up and subsequent continued operation, electrical equipment requires periodic inspection and testing which will be...

Maintaining & Troubleshooting Electrical Equipment

This course covers fundamental and practical of instrumentation measurements including Flow Rate Measurement, Pressure Measurement, Level Measurement, and Temperature Measurement employed in a number of common control applications including compressors, boilers, distillation columns, chemical...

Process Instrumentation and Control for Plant Operators

Process Instrumentation Technology

In this era of increased industry consolidation and heightened competition, the dynamics of international business are in full force. Thunderbird's Executive Certificate in Global Oil & Gas Management is designed to provide you with a well-rounded, global understanding of the unique and...

Thunderbird School of Global Management

Global Oil & Gas Management Certificate

Learn to deliver projects on time, on budget and on spec when you earn your Project Management Graduate Certificate online. Finish your program prepared to lead a project through its entire life cycle – from initiation to planning, execution to monitoring and completion.

What you learn in this...

Oil and Gas courses in Madison, Wisconsin, United States

Short executive courses on Oil and Gas

Or try online courses

Courses under 4000 USD