Simo Pekka Hannula
Professor, Materials Science at Aalto University School of Business
Schools
- Aalto University School of Business
Links
Biography
Aalto University School of Business
Peer-reviewed scientific articles
Journal article-refereed, Original researchTitania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes
Ali, Saima; Hannula, Simo Pekka2017 in JOURNAL OF SOLID STATE CHEMISTRY (ACADEMIC PRESS INC ELSEVIER SCIENCE)ISSN: 0022-4596Preparation and Photocatalytic Activity of Quaternary GO/TiO2/Ag/AgCl Nanocomposites
Granbohm, Henrika; Kulmala, Kati; Iyer, Ajai; Ge, Yanling; Hannula, Simo Pekka2017 in WATER AIR AND SOIL POLLUTION (Springer Netherlands)ISSN: 0049-6979Effect of graphene oxide loading in GO/SiO2/Ag/AgCl photocatalyst
Granbohm, Henrika; Singh, Vivek K.; Ge, Yanling; Hannula, Simo Pekka2017 in INTERNATIONAL JOURNAL OF NANOTECHNOLOGY (Inderscience Enterprises Ltd)ISSN: 1475-7435Nanosilver–silica composite Prolonged antibacterial effects and bacterial interaction mechanisms for wound dressings
Mosselhy, Dina A.; Granbohm, Henrika; Hynönen, Ulla; Ge, Yanling; Palva, Airi; Nordström, Katrina; Hannula, Simo Pekka2017 in Nanomaterials (Inderscience Enterprises Ltd)ISSN: 2079-4991Highly porous spark plasma sintered Ni-Mn-Ga structures
Nilsén, Frans; Lehtonen, Joonas; Ge, Yanling; Aaltio, Ilkka; Hannula, Simo Pekka2017 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Aluminum oxide/titanium dioxide nanolaminates grown by atomic layer deposition Growth and mechanical properties
Ylivaara, Oili M E; Kilpi, Lauri; Liu, Xuwen; Sintonen, Sakari; Ali, Saima; Laitinen, Mikko; Julin, Jaakko; Haimi, Eero; Sajavaara, Timo; Lipsanen, Harri; Hannula, Simo Pekka; Ronkainen, Helena; Puurunen, Riikka2017 in JOURNAL OF VACUUM SCIENCE AND TECHNOLOGY A (AVS Science and Technology Society)ISSN: 0734-2101Silica-gentamicin nanohybrids Synthesis and antimicrobial action
Ahmed Mosselhy, Dina; Ge, Yanling; Gasik, Michael; Nordström, Katrina; Natri, Olli; Hannula, Simo-Pekka2016 in MATERIALS (MDPI AG)ISSN: 1996-1944Crystal structure and photocatalytic properties of titanate nanotubes prepared by chemical processing and subsequent annealing
Ali, Saima; Granbohm, Henrika; Ge, Yanling; Singh, Vivek Kumar; Nilsén, Frans; Hannula, Simo Pekka2016 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Thermal conductivity of amorphous Al2O3/TiO2 nanolaminates deposited by atomic layer deposition
Ali, Saima; Juntunen, Taneli; Sintonen, Sakari; Ylivaara, Oili M E; Puurunen, Riikka; Lipsanen, Harri; Tittonen, Ilkka; Hannula, Simo Pekka2016 in NANOTECHNOLOGY (IOP PUBLISHING LTD)ISSN: 0957-4484Al2O3-cBN composites sintered by SPS and HPHT methods
Klimczyk, P.; Cura, M. E.; Vlaicu, A. M.; Mercioniu, I.; Wyzga, P.; Jaworska, L.; Hannula, S. P.2016 in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (ELSEVIER SCI LTD)ISSN: 0955-2219Properties of the pulsed electric current sintered Ni-Mn-Ga-Co-WC composites
Nilsen, Frans; Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Glavastkyy, Illya; Lahelin, Mika; Maki, Ryuji; Hannula, Simo-Pekka2016 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)ISSN: 0925-8388Neutron Diffraction Study of the Martensitic Transformation and Chemical Order in Heusler Alloy Ni1.91Mn1.29Ga0.8
Ari-Gur, Pnina; Garlea, V.Ovidiu; Cao, Huibo; Ge, Yanling; Aaltio, Ilkka; Hannula, Simo-Pekka; Koledov, Viktor2015 in Materials Today: Proceedings (Elsevier)Friction behavior of alumina/molybdenum composites and formation of MoO_3-x phase at 400 °C
Cura, M.Erkin; Liu, Xuwen W.; Kanerva, U.; Varjus, S.; Kivioja, Antti; Söderberg, Outi; Hannula, Simo-Pekka2015 in TRIBOLOGY INTERNATIONAL (Elsevier Inc.)ISSN: 0301-679XStress-induced transition from modulated 14M to non-modulated martensite in NiMnGa alloy
Ge, Yanling; Zarubova, Niva; Heczko, Oleg; Hannula, Simo-Pekka2015 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454A study of hydrogen charging on 10M Ni-Mn-Ga single crystal
Ge, Yanling; Aaltio, Ilkka; Hannula, Simo-Pekka2015 in Materials Today: Proceedings (Elsevier)ISSN: 2214-7853Design and Characterization of Hybrid Materials
Jeong, Young-Keun; Barboiu, Mihai; Hannula, Simo-Pekka; Ho Kim, Kwan2015 in ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (Hindawi Publishing Corporation)ISSN: 1687-8434Microstructural Study of Spray Deposited 2.5C20Cr High Chromium White Iron
Lotta, Juho; Hannula, Simo-Pekka2015 in Metallography, Microstructure and Analysis (Springer Science + Business Media)ISSN: 2192-9262Synthesis of Nanosized Silica and Silver-doped Silica Nanoparticles for Heat Transfer Fluids Applications
Mahmed, Norsuria; Al Bakri Abdullah, Mohd Mustafa; Sandu, Andrei Victor; Vizureanu, Petrica; Hannula, Simo-Pekka2015 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Characterization of Gas Atomized Ni-Mn-Ga powders
Nilsén, Frans; Aaltio, Ilkka; Ge, Yanling; Lindroos, Tomi; Hannula, Simo-Pekka2015 in Materials Today: Proceedings (Elsevier)Combined sol-gel and carbothermal synthesis of ZrC-TiC powders for composites
Umalias, Madis; Hussainova, Irina; Reedo, Valter; Young, Der-Liang; Cura, Mehmet; Hannula, Simo-Pekka; Lohmus, Rünno; Lohmus, Ants2015 in Materials Chemistry and Physics (Elsevier Science)ISSN: 0254-0584Densification and characterization of sparkplasma sintered ZrCZrO2 composites
Hussainova, Irina; Voltsihhin, Nikolai; Cura, Mehmet; Hannula, Simo-Pekka2014 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093On the reliability of nanoindentation hardness of Al2O3 films grown on Si-wafer by atomic layer deposition
Liu, Xuwen; Haimi, Eero; Hannula, Simo-Pekka; Ylivaara, Oili M. E.; Puurunen, Riikka L.2014 in JOURNAL OF VACUUM SCIENCE AND TECHNOLOGY A (AVS Science and Technology Society)ISSN: 0734-2101Microstructure and wear resistance of spray formed and conventionally cast high-chromium white iron
Lotta, Juho; Hannula, Simo-Pekka2014 in MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (WILEY-V C H VERLAG GMBH)ISSN: 0933-5137The magnetic and oxidation behavior of bare and silica-coated magnetite nanoparticles synthesized by reverse co-precipitation of ferrous ion (Fe2+) in ambient atmosphere
Mahmed, Norsuria; Heczko, Oleg; Lancok, Anne; Hannula, Simo-Pekka2014 in JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (Elsevier Science B.V.)ISSN: 0304-8853Thermal and plasma enhanced atomic layer deposition of SiO2 using commercial silicon precursors
Putkonen, Matti; Bosund, M.; Ylivaara, Oili M. E.; Puurunen, Riikka; Kilpi, L.; Ronkainen, H.; Sintonen, S.; Ali, S.; Lipsanen, H.; Liu, Xuwen; Haimi, Eero; Hannula, Simo-Pekka; Sajavaara, T.; Buchanan, I.; Karwacki, E.; Vähä-Nissi, M.2014 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090Comparison of the wear and frictional properties of Cu matrix composites prepared by pulsed electric current sintering
Ritasalo, Riina; Antonov, M.; Veinthal, R.; Hannula, Simo-Pekka2014 in Proceedings of the Estonian Academy of Sciences (TEADUSTE AKADEEMIA KIRJASTUS)ISSN: 1736-6046Mechanical and thermal properties of pulsed electric current sintered (PECS) Cu-diamond compacts
Ritasalo, Riina; Kanerva, U.; Ge, Yanling; Hannula, Simo-Pekka2014 in METALLURGICAL AND MATERIALS TRANSACTIONS B: PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (SPRINGER)ISSN: 1073-5615Lubricating properties of silica/graphene oxide composite powders
Singh, Vivek K.; Elomaa, Oskari; Johansson, Leena-Sisko; Hannula, Simo-Pekka; Koskinen, Jari2014 in CARBON (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0008-6223Tuning the Mechanical and Adsorption Properties of Silica with Graphene Oxide
Singh, Vivek K.; Cura, M.Erkin; Liu, Xuwen; Johansson, Leena-Sisko; Ge, Yanling; Hannula, Simo-Pekka2014 in CHEMPLUSCHEM (Wiley-VCH Verlag)Formation Mechanisms, Structure, and Properties of HVOF-Sprayed WC-CoCr Coatings: An Approach Toward Process Maps
Varis, T.; Suhonen, T.; Ghabchi, A; Valarezo, A; Sampath, S; Liu, Xuwen; Hannula, Simo-Pekka2014 in JOURNAL OF THERMAL SPRAY TECHNOLOGY (Springer New York)ISSN: 1059-9630Aluminum oxide from trimethylaluminum and water by atomic layer deposition: The temperature dependence of residual stress, elastic modulus, hardness and adhesion
Ylivaara, Oili M. E.; Liu, Xuwen; Kilpi, L.; Lyytinen, Jussi; Schneider, D.; Laitinen, M.; Julin, J.; Ali, S.; Sintonen, S.; Berdova, Maria; Haimi, Eero; Sajavaara, T.; Ronkainen, H.; Lipsanen, H.; Koskinen, Jari; Hannula, Simo-Pekka; Puurunen, R.L.2014 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090Twinning in shear and uniaxial loading in five layered martensite Ni-Mn-Ga single crystals
Aaltio, Ilkka; Ge, Yanling; Hannula, Simo-Pekka2013 in EUROPEAN PHYSICAL JOURNAL B (SPRINGER)ISSN: 1434-6028Nanoscale surface properties of a Ni-Mn-Ga 10M magnetic shape memory alloy
Aaltio, Ilkka; Liu, Xuwen; Valden, Mika; Lahtonen, K.; Söderberg, Outi; Ge, Yanling; Hannula, Simo-Pekka2013 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)ISSN: 0925-8388Neutron diffraction study of a non-stoichiometric Ni-Mn-Ga MSM ALLOY
Ari-Gur, Pnina; Garlea, V. Ovidiu; Coke, Ashley; Ge, Yanling; Aaltio, Ilkka; Hannula, Simo-Pekka; Cao, Huibo; Madiligama, Amila Sb; Koledov, Victor2013 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Neutron diffraction study of Ni-Mn-Ga MSM alloy
Ari-Gur, Pnina; Ralalage, Amila M; Garlea, V.Ovidiu; Cao, Huibo; Coke, Ashley; Ge, Yangling; Aaltio, Ilkka; Hannula, Simo-Pekka2013 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476The Control of Size and Surface Morphology of Silica Microspheres by Sol-Gel Emulsion Approach
Chen, Qian; Friman, Michael; Vilonen, Kati; Hannula, Simo-Pekka2013 in WARASAN TECHNOLOGY SURANAREE (Trans Tech Publications)ISSN: 0858-849XMicrostructure and tribological properties of pulsed electric current sintered alumina-zirconia nanocomposites with different solid lubricants
Cura, M.Erkin; Kim, Seung-Ho; Muukkonen, Tatu; Varjus, Simo; Vaajoki, Antti; Söderberg, Outi; Suhonen, Tomi; Kanerva, Ulla; Lee, Soo Wohn; Hannula, Simo-Pekka2013 in CERAMICS INTERNATIONAL (Elsevier Limited)ISSN: 0272-8842Influence of Hydrochloric Acid Concentrations on the Formation of AgCl-doped Iron Oxide-Silica Coreshell Structures
Mahmed, Norsuria; Heczko, Oleg; Hannula, Simo-Pekka2013 in Advances in Science and Technology (Elsevier Limited)ISSN: 1662-8969Influence of sintering temperature on the properties of pulsed electric current sintered hybrid coreshell powders
Mahmed, Nosuria; Larismaa, Juha; Heczko, Oleg; Cura, M.Erkin; Hannula, Simo-Pekka2013 in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (ELSEVIER SCI LTD)ISSN: 0955-2219Microstructural and mechanical characteristics of Cu-Cu2O composites compacted with pulsed electric current sintering and hot isostatic pressing
Ritasalo, R.; Cura, M.E.; Liu, X.W.; Ge, Y.; Kosonen, T.; Kanerva, U.; Söderberg, O.; Hannula, S-P.2013 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)ISSN: 1359-835XIn-situ TEM study of deformation twinning in Ni-Mn-Ga non-modulated martensite
Zárubová, Niva; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2013 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Effect of synthesis time on morphology of hollow porous silica microspheres
Chen, Qian; Larismaa, Juha; Keski-Honkola, Anu; Vilonen, Kati; Söderberg, Outi; Hannula, Simo-Pekka2012 in MATERIALS SCIENCE: MEDZIAGOTYRA (Kauno Technologijos Universitetas)ISSN: 1392-1320Processing and Properties of Ni-Mn-Ga Magnetic-Shape-Memory Alloy Based Hybrid Materials
Hannula, Simo-Pekka; Aaltio, Ilkka; Ge, Yanling; Lahelin, Mika; Söderberg, Outi2012 in CURRENT APPLIED PHYSICS (Elsevier)ISSN: 1567-1739Mechanical properties of alumina based nanocomposites
Kannisto, E.; Cura, Mehmet; Levänen, E.; Hannula, Simo-Pekka2012 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Effects of the sliding conditions on the tribological behavior of atmospheric plasma sprayed Al2O3-15 wt.% ZrO2-CaF2 composite coating
Kim, Seung-Ho; Hannula, Simo-Pekka; Lee, Soo-Wohn2012 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)ISSN: 0257-8972Processing and characterization of porous silica-Ag-nanoparticle composites produced by pulsed electric current sintering
Larismaa, Juha; Söderberg, Outi; Syrén, J.; Haimi, Eero; Hannula, Simo-Pekka2012 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Phase transformation of ironoxidesilica coreshell structure during differential scanning calorimetry and pulsed electric current sintering processes: A comparison
Mahmed, Norsuria; Friman, Michael; Hannula, Simo-Pekka2012 in MATERIALS LETTERS (Elsevier)ISSN: 0167-577XInfluence of different synthesis approach on doping behavior of silver nanoparticles onto the iron oxide-silica coreshell surfaces
Mahmed, Norsuria; Jiang, Hua; Heczko, Oleg; Söderberg, Outi; Hannula, Simo Pekka2012 in JOURNAL OF NANOPARTICLE RESEARCH (SPRINGER)ISSN: 1388-0764Thermal stability of PECS-compacted Cu-composites
Ritasalo, Riina; Kanerva, U.; Hannula, Simo-Pekka2012 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Densification and microstructure development in zirconia toughened hardmetals
Voltsihhin, Nikolai; Hussainova, Irina; Cura, M.Erkin; Hannula, Simo-Pekka; Traksmaa, Rainer2012 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Dislocation Mechanism of Twinning in Ni-Mn-Ga
Zarubova, N.; Ge, Yanling; Gemperlová, Juliana; Gemperle, Antonín; Hannula, Simo-Pekka2012 in FUNCTIONAL MATERIALS LETTERS (World Scientific Publishing Co. Pte Ltd)ISSN: 1793-6047Long-term cyclic loading of 10M Ni-Mn-Ga alloys
Aaltio, Ilkka; Söderberg, Outi; Ge, Yanling; Hannula, Simo-Pekka2011 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Wear behaviour of HVOF-sprayed nanostructured WC-CoCr coatings
Bergonzini, E.; Bolelli, G.; Bonferroni, B.; Lusvarghi, L.; Varis, T.; Kanerva, U.; Suhonen, T.; Oksanen, J.; Söderberg, O.; Hannula, S-P.2011 in DVS-BERICHTE (Trans Tech Publications)ISSN: 0418-9639Pulsed Electric Current Sintering of the Al2O3 - 15wt% ZrO2 Nanocomposites with 3 wt% of Different Solid Lubricants
Cura, Mehmet; Kim, Seung-Ho; Cho, Sung-Hun; Suhonen, Tomi; Muukkonen, Tatu; Vaajoki, Antti; Söderberg, Outi; Kanerva, Ulla; Lee, Soo Wohn; Hannula, Simo-Pekka2011 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Optical and structural properties of nanocrystalline anatase (TiO2) thin films prepared by non-aqueous sol-gel dip-coating
Haimi, E.; Lipsonen, H.; Larismaa, J.; Kapulainen, M.; Krzak-Ros, J.; Hannula, S-P.2011 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090Effects of Fabricated Method on the Coefficient of Friction of Al2O3-15wt% ZrO2-3 wt% Solid Lubricant Composites
Kim, Seung-Ho; Cura, Mehmet; Söderberg, Outi; Hannula, Simo-Pekka; Lee, Soo Wohn2011 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Stabilizing internal stress as the thermodynamic factor of martensite aging effects.
Kosogor, Anna; L’vov, Victor A.; Söderberg, Outi; Hannula, Simo-Pekka2011 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Effect of Annealing on Ag-doped Submicron Silica Powder Prepared with Modified Stöber Method
Larismaa, Juha; Honkanen, Toni; Ge, Yanling; Söderberg, Outi; Friman, Michael; Hannula, Simo-Pekka2011 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Novel iron oxide–silica coreshell powders compacted by using pulsed electric current sintering Optical and magnetic properties
Mahmed, N.; Heczko, O.; Maki, R.; Söderberg, Outi; Haimi, Eero; Hannula, Simo-Pekka2011 in JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (ELSEVIER SCI LTD)ISSN: 0955-2219Room Temperature Synthesis of Magnetite (Fe3-dO4) Nanoparticles by a Simple Reverse Co-Precipitation Method
Mahmed, N.; Heczko, O.; Söderberg, Outi; Hannula, Simo-Pekka2011 in IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING (IOP Publishing Ltd.)ISSN: 1757-8981Optimization and Characterization of High Velocity Oxy-fuel Sprayed Coatings Techniques, Materials, and Applications
Oksa, Maria; Turunen, Erja; Suhonen, Tomi; Varis, Tommi; Hannula, Simo-Pekka2011 in COATINGS (IOP Publishing Ltd.)The Microstructural Effects on the Mechanical and Thermal Properties of Pulsed Electric Current Sintered Cu-Al2O3 Composites
Ritasalo, R.; Liu, X.W.; Söderberg, O.; Keski-Honkola, A.; Pitkänen, V.; Hannula, S-P.2011 in Procedia Engineering (Elsevier BV)ISSN: 1877-7508Microstructure and properties of Ni-Mn-Ga alloys produced by rapid solidification and pulsed electric current sintering
Söderberg, Outi; Brown, David; Aaltio, Ilkka; Oksanen, Jussi; Syrén, Jesse; Pulkkinen, Heikki; Hannula, Simo-Pekka2011 in JOURNAL OF ALLOYS AND COMPOUNDS (Elsevier Science)ISSN: 0925-8388Crack growth of 10M Ni-Mn-Ga material in cyclic mechanical loading
Aaltio, I.; Ge, Yanling; Pulkkinen, H.; Sjöberg, A.; Söderberg, O.; Liu, X.W.; Hannula, S.-P.2010 in PHYSICS PROCEDIA (Elsevier BV)High-cycle fatigue of 10M Ni-Mn-Ga magnetic shape memory alloy in reversed mechanical loading
Aaltio, I.; Soroka, A.; Ge, Y.; Söderberg, O.; Hannula, S. P.2010 in SMART MATERIALS AND STRUCTURES (IOP Publishing)ISSN: 0964-1726High-cycle fatigue of 10M Ni-Mn-Ga magnetic shape memory in reversed mechanical loading
Aaltio, Ilkka; Soroka, Alexandr; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2010 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)ISSN: 0964-1726Twin boundary nucleation and motion in Ni-Mn-Ga magnetic shape memory material with a low twinning stress
Aaltio, Ilkka; Soderberg, Outi; Ge, Yanling; Hannula, Simo-Pekka2010 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Mechanische und tribologische Eigenschaften von HVOF-gespritzten keramischen Beschichtungen. Mechanical and tribological properties of HVOF-sprayed ceramic coatings
Bolelli, Giovanni; Lusvarghi, Luca; Hannula, Simo-Pekka; Turunen, Erja; Varis, Tommi2010 in THERMAL SPRAY BULLETIN (Elsevier Limited)ISSN: 1866-6248The Investigated Microstructure and Mechanical Properties of Al2O3/20wt% TiO2 Nanocomposite Coating
Dejang, Nuchiira; Watcharapasorn, Anucha; Wirojupatump, Sittichal; Hannula, Simo-Pekka; Jiansirisomboon, Sukanda2010 in ADVANCED MATERIALS RESEARCH (Trans Tech Publications)ISSN: 1022-6680Probing structure and microstructure of epitaxial Ni-Mn-Ga films by reciprocal space mapping and pole figure measurements
Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka; Fähler, Sebastian2010 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454Behavior of HVOF WC-10Co4Cr coatings with different carbide size in fine and coarse particle abrasion
Ghabchi, Arash; Varis, Tommi; Turunen, Erja; Suhonen, Tomi; Liu, Xuwen; Hannula, S. P.2010 in JOURNAL OF THERMAL SPRAY TECHNOLOGY (Springer New York)ISSN: 1059-9630Effects of Different Solid Lubricants on Mechanical and Tribological Properties of Al2O3/ZrO2 Nanocomposites
Kim, Seung-Ho; Cho, Sung-Hun; Hannula, Simo-Pekka; Lee, Soo Wohn2010 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Surface pretreatment of austenitic stainless steel and copper by chemical, plasma electrolytic or CO2 cryoblasting techniques for sol-gel coating
Niemi, Raisa; Mahiout, Amar; Siivinen, Jarmo; Mahlberg, Riitta; Likonen, Jari; Nikkola, Juha; Mannila, Juha; Vuorio, Tiina; Johansson, Leena-Sisko; Söderberg, Outi; Hannula, Simo-Pekka2010 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)ISSN: 0257-8972Spark plasma sintering of submicron-sized Cu-powder - Influence of processing parameters and powder oxidization on microstructure and mechanical properties
Ritasalo, Riina; Cura, M.Erkin; Liu, Xuwen; Söderberg, Outi; Ritvonen, Tapio; Hannula, Simo-Pekka2010 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093In situ fabrication of waveguide-compatible glass-embedded silver nanoparticle patterns by masked ion-exchange process
Chen, Ya; Jaakola, Janne; Ge, Yanling; Saynatjoki, Antti; Tervonen, Ari; Hannula, Simo-Pekka; Honkanen, Seppo2009 in JOURNAL OF NON-CRYSTALLINE SOLIDS (Elsevier)ISSN: 0022-3093Process parameter optimization of pulsed electric current sintering of recycled WC-8Co powder
Cura, Mehmet Erkin; Lagerbom, Juha; Ritasalo, Riina; Syrén, Jesse; Lotta, Juho; Söderberg, Outi; Ritvonen, Tapio; Turunen, Erja; Hannula, Simo-Pekka2009 in ESTONIAN JOURNAL OF ENGINEERING (Estonian Academy Publishers)ISSN: 1736-6038X-ray Diffraction Reciprocal Space Mapping Study of Modulated Crystal Structures in 10M Ni-Mn-Ga Martensitic Phase
Ge, Yanling; Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2009 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Behovor of HVOF WC-10Co4Cr Coatings with Different Carbide Size in Fine Particle Slurry Abrasion
Ghabchi, A.; Varis, T.; Turunen, E.; Suhonen, T.; Liu, X.W.; Hannula, S-P2009 in JOURNAL OF THERMAL SPRAY TECHNOLOGY (Springer New York)ISSN: 1059-9630Processing of Hybrid Materials for Components with Improved Life-Time
Hannula, Simo-Pekka; Turunen, Erja; Koskinen, Jari; Söderberg, Outi2009 in CURRENT APPLIED PHYSICS (Elsevier)ISSN: 1567-1739Correlation of material characteristics and wear in laboratory scale cone crusher
Kivikytö-Reponen, Päivi; Ala-Kleme, Sanna; Hellman, Jussi; Liimatainen, Jari; Hannula, Simo-Pekka2009 in WEAR (Elsevier BV)ISSN: 0043-1648DMA testing of Ni-Mn-Ga/polymer composites
Lahelin, M.; Aaltio, I.; Heczko, O.; Söderberg, O.; Ge, Y.; Löfgren, B.; Hannula, S.-P.; Seppälä, J.2009 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)ISSN: 1359-835XThe Symmetry-Conforming Theory of Martensite Aging
"L'vov", Victor A.; Kosogor, Anna; Söderberg, Outi; Hannula, Simo-Pekka2009 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476The role of anisotropic thermal expansion of shape memory alloys in their functional properties
L’vov, Victor A.; Glavatska, N.; Aaltio, I.; Soederberg, O.; Glavatskyy, I.; Hannula, S. -P.2009 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454The Effect of Microstructure on mechanical properties of HVOF sprayed WC-CoCr composite coatings
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Liu, Xuwen; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2009 in TRIBOLOGIA (Suomen Tribologiayhdistys)ISSN: 0780-2285Process study on the formation of nanocrystalline alpha-alumina with novel morphology at 1000 degrees C
Zhang, Xiaoxue; Ge, Yanling; Hannula, Simo-Pekka; Levanen, Erkki; Mantyla, Tapio2009 in JOURNAL OF MATERIALS CHEMISTRY (ROYAL SOC CHEMISTRY)ISSN: 0959-9428Temperature dependence of the damping properties of Ni-Mn-Ga alloys
Aaltio, I.; Lahelin, M.; Söderberg, O.; Heczko, O.; Löfgren, B.; Ge, Y.; Seppälä, J.; Hannula, S.-P.2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Temperature dependence of mechanical damping in Ni-Mn-Ga austenite and non-modulated martensite
Aaltio, I.; Mohanchandra, K.P.; Heczko, O.; Lahelin, M.; Ge, Y.; Carman, G. P.; Söderberg, O.; Löfgren, B.; Seppälä, J.; Hannula, S.-P.2008 in SCRIPTA MATERIALIA (Elsevier Limited)Comparison of different methods for studying magnetic domains in Ni-Mn-Ga martensites
Ge, Yanling; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Strain and concurrent magnetization changes in magnetic shape memory NiMnGa single crystals experiment and model
Heczko, Oleg; Straka, Ladislav; Aaltio, Ilkka; Hannula, Simo-Pekka2008 in Materials Science and Engineering A (ELSEVIER SCIENCE SA LAUSANNE)Magnetic shape memory effect in thin foils
Heczko, Oleg; Soroka, Aleksandr; Hannula, Simo-Pekka2008 in APPLIED PHYSICS LETTERS (AMERICAN INSTITUTE OF PHYSICS)ISSN: 0003-6951Temperature dependence of magnetically induced deformation of Ni-Mn-Ga martensite
L’vov, Victor A.; Glavatska, Nadiya; Aaltio, Ilkka; Söderberg, Outi; Glavatski, Illiya; Hannula, Simo-Pekka2008 in EUROPEAN PHYSICAL JOURNAL: SPECIAL TOPICS (Springer Verlag)ISSN: 1951-6355Stress induced martensite variant reorientation in magnetic shape memory Ni-Mn-Ga single crystal studied by neutron diffraction
Molnar, Peter; Sittner, Peter; Lukas, P.; Hannula, Simo-Pekka; Heczko, Oleg2008 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)ISSN: 0964-1726In situ neutron diffraction study of magnetic field induced martensite reorientation in Ni-Mn-Ga under constant stress
Molnar, Peter; Sittner, Peter; Novak, Vaclav; Prokleska, J.; Sechovsky, V.; Ouladdiaf, B.; Hannula, Simo-Pekka; Heczko, Oleg2008 in JOURNAL OF PHYSICS: CONDENSED MATTER (IOP PUBLISHING LTD)ISSN: 0953-8984Ni-Mn-Ga multifunctional compounds
Söderberg, Outi; Aaltio, Ilkka; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2008 in Materials Science and Engineering A (IOP PUBLISHING LTD)Recent developments of magnetic SMA
Söderberg, Outi; Aaltio, Ilkka; Ge, Yanling; Liu, Xuwen; Hannula, Simo-Pekka2008 in Advances in Science and Technology (IOP PUBLISHING LTD)ISSN: 1662-8969Development of precision spray forming for rapid tooling
Yang, Yunfeng; Hannula, Simo-Pekka2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Nanocrystalline gamma-alumina and alfa-alumina from Boehmite nanoflakes
Zhang, Xiaoxue; Honkanen, Mari; Ge, Yanling; Hannula, Simo-Pekka; Levänen, Erkki; Mäntylä, Tapio2008 in JOURNAL OF MATERIALS CHEMISTRY (ROYAL SOC CHEMISTRY)ISSN: 0959-9428Nanocrystalline α-alumina with novel morphology at 1000 °c
Zhang, Xiaoxue; Ge, Yanling; Hannula, Simo Pekka; Levänen, Erkki; Mäntylä, Tapio2008 in JOURNAL OF MATERIALS CHEMISTRY (ROYAL SOC CHEMISTRY)ISSN: 0959-9428Uudet urheilumateriaalit
Aaltio, Ilkka; Hannula, S-P2007 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Abrasive wear properties of tool steel matrix composites in rubber wheel abrasion test and laboratory cone crusher experiments
Ala-Kleme, Sanna; Kivikytö-Reponen, Päivi; Liimatainen, Jari; Hellman, Jussi; Hannula, Simo-Pekka2007 in WEAR (Elsevier BV)ISSN: 0043-1648Comparison between Plasma- and HVOF-Sprayed Ceramic Coatings Part 2: Tribological Behaviour
Bolelli, Giovanni; Lusvarghi, Luca; Manfredini, T.; Turunen, Erja; Varis, Tommi; Hannula, Simo-Pekka2007 in International Journal of Surface Science and Engineering (IJSurfSE) (Elsevier BV)Comparison between Plasma- and HVOF-Sprayed Ceramic Coatings Part 1: Microstructure and Mechanical Properties
Bolelli, Giovanni; Lusvarghi, Luca; Manfredini, T.; Pighetti-Mantini, F.; Polini, R.; Turunen, Erja; Varis, Tommi; Hannula, Simo-Pekka2007 in INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (Inderscience Enterprises Ltd)ISSN: 1749-785XSubmicron-sized hybrid SiO2-Ni powders produced with the sol-gel method
Borak, B.; Laskowski, S.; Heczko, O.; Aaltonen, A.; Baszczuk, A.; Jasiorski, M.; Söderberg, O.; Mazurek, B.; Oja, M.; Hannula, S. P.; Maruszewski, K.2007 in MATERIALS SCIENCE POLAND (Walter de Gruyter GmbH)ISSN: 0137-1339Synthesis and properties of solgel submicron silica powders doped with iron crystallites
Borak, Beata; Laskowski, S; Heczko, Oleg; Aaltonen, Annukka; Baszczuk, A.; Jasiorski, Marek; Söderberg, Outi; Mazurek, B; Oja, Marja; Hannula, Simo-Pekka; Maruszewski, Krzysztof2007 in JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (Springer Netherlands)ISSN: 0928-0707Synthesis and properties of sol-gel submicron silica powders doped with partly oxidized iron particles
Borak, B.; Laskowski, S.; Heczko, O.; Aaltonen, A.; Baszczuk, A.; Jasiorski, M.; Söderberg, O.; Mazurek, B.; Oja, M.; Hannula, S. P.; Maruszewski, K.2007 in JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (Springer Netherlands)ISSN: 0928-0707Submicronsized hybrid SiO2-Ni0 powders by the sol-gel method
Borak, Beata; Laskowski, S; Heczko, Oleg; Baszczuk, A; Jasiorski, Marek; Söderberg, Outi; Mazurek, B; Hannula, Simo-Pekka; Maruszewski, Krzysztof2007 in MATERIALS SCIENCE POLAND (Walter de Gruyter GmbH)ISSN: 2083-1331Crystal structure and high-temperature magnetoplasticity in the new Ni-Mn-Ga-Cu magnetic shape memory alloys
Glavatskyy, Illiya; Glavatska, Nadiya; Hoffmann, Jens-Uwe; Söderberg, Outi; Hannula, Simo-Pekka2007 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Neutron diffraction studies of magnetic-shape memory Ni-Mn-Ga single crystal
Heczko, Oleg; Prokes, Karel; Hannula, Simo-Pekka2007 in JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (Elsevier Science B.V.)ISSN: 0304-8853A piezopaint-based sensor for monitoring structure dynamics
Lahtinen, R.; Muukkonen, T.; Koskinen, J.; Hannula, S. P.; Heczko, O.2007 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)ISSN: 0964-1726Structural monitoring by using piezopaint sensors
Lahtinen, Reima; Muukkonen, Tatu; Koskinen, Jari; Hannula, Simo-Pekka; Heczko, Oleg2007 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)Morphology of ferromagnetic sol-gel submicron silica powders doped with iron and nickel particles
Söderberg, Outi; Ge, Yanling; Haimi, Eero; Heczko, Oleg; Oja, Marja; Laine, Jorma; Suhonen, T.; Aaltonen, A.; Kalliokari, Karin; Borak, Beata; Jasiorski, Marek; Baszczuk, A.; Maruszewski, Krzysztof; Hannula, Simo-Pekka2007 in MATERIALS LETTERS (Elsevier)ISSN: 0167-577XApplication of HVOF Techniques for Spraying of Ceramic Coatings
Turunen, Erja; Hirvonen, Ari; Varis, Tommi; Fält, Teppo; Hannula, Simo-Pekka; Sekino, Tohru; Niihara, Koichi2007 in Advances in Technology of Materials and Materials Processing Journal (Elsevier)ISSN: 1440-0731Abrasive Wear Properties of Metal Matrix Composites Produced by Hot Isostatic Pressing
Ala-Kleme, Sanna; Kivikytö-Reponen, Päivi; Liimatainen, Jari; Hellman, Jussi; Hannula, Simo-Pekka2006 in Proceedings of the Estonian Academy of Sciences Engineering (Estonian Academy Publishers)ISSN: 1406-0175Magnetic domain evolution with applied field in a Ni-Mn-Ga magnetic shape memory alloy
Ge, Yanling; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka2006 in SCRIPTA MATERIALIA (Elsevier Limited)Crystal structure and macrotwin interface of five-layered martensite in Ni-Mn-Ga magnetic shape memory alloy
Ge, Yanling; Jiang, Huang; Sozinov, Alexei; Söderberg, Outi; Lanska, Natalie; Keränen, Jouni; Kauppinen, Esko; Lindroos, Veikko K.; Hannula, Simo-Pekka2006 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Direct optical observation of magnetic domains in Ni-Mn-Ga martensite
Ge, Yanling; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka2006 in APPLIED PHYSICS LETTERS (AMER INST PHYSICS)ISSN: 0003-6951Effect of alloying on the phase transformation and magnetic shape memory in Ni-Mn-Ga compounds
Glavatska, Nadiya; Dobrinskiy, Alexander; Glavatskyy, Illiya; Urubkov, Illiya; Söderberg, Outi; Hannula, Simo-Pekka2006 in Functional Materials (National Academy of Sciences of Ukraine)Transformation temperatures and magnetoplasticity of Ni-Mn-Ga alloyed with Si, In, Co or Fe
Glavatskyy, Illiya; Glavatska, Nadiya; Söderberg, Outi; Hannula, Simo-Pekka; Hoffmann, Jens-Uwe2006 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Mechanical Properties of Nanocrystalline HVOF Coatings
Hannula, Simo-Pekka; Fält, Teppo; Turunen, Erja; Manninen, Timo2006 in Materials Science Forum (Trans Tech Publications)Shape Memory Alloys for Biomedical Applications
Hannula, Simo-Pekka; Söderberg, Outi; Jämsä, Timo; Lindroos, Veikko2006 in Advances in Science and Technology (Trans Tech Publications)ISSN: 1662-8969Magnetic indication of the stress-induced martensitic transformation in ferromagnetic Ni-Mn-Ga alloy
Heczko, Oleg; L'vov, Victor; Straka, Ladislav; Hannula, Simo-Pekka2006 in JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (Elsevier Science B.V.)Stress dependence of magnetic shape memory effect and its model
Heczko, Oleg; Straka, Ladislav; Hannula, Simo-Pekka2006 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Time-dependent magnetostrain and thermal phonons in the Ni-Mn-Ga magnetic shape-memory alloys
L'vov, Victor A.; Glavatska, Nadiya; Glavatskyy, Illiya; Ge, Yanling; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka2006 in INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS (IOS Press)ISSN: 1383-5416Temperature Dependence of Reversible Field-Induced Strain in Ni-Mn-Ga Single Crystals
Straka, Ladislav; Heczko, Oleg; Hannula, Simo-Pekka2006 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Effect of intermartensitic reaction on the co-occurrence of the magnetic and structural transition in Ni-Mn-Ga alloys
Söderberg, Outi; Sozinov, Alexei; Lanska, Nataliya; Ge, Yanling; Lindroos, Veikko K.; Hannula, Simo-Pekka2006 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Development of Nano-reinforced HVOF Sprayed Ceramic Coatings
Turunen, Erja; Keskinen, Jari; Heczko, Oleg; Lintunen, Pertti; Gustafsson, Tom; Ge, Yanling; Arponen, M.; Hannula, Simo-Pekka2006 in ADVANCED ENGINEERING MATERIALS (Wiley-VCH Verlag)ISSN: 1438-1656On the role of particle state and deposition procedure on mechanical, tribological and dielectric response of high velocity oxy-fuel sprayed alumina coatings
Turunen, Erja; Varis, Tommi; Hannula, Simo-Pekka; Kulkarni, Anand; Gutleber, Jonathan; Vaidya, Anirudha; Sampath, Sanjay; Herman, Herbert2006 in Materials Science and Engineering (Wiley-VCH Verlag)Process optimization for nanostructured HVOF-sprayed Al2O3-based ceramic coatings
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Fält, Teppo; Nowak, Roman; Hannula, Simo-Pekka2006 in KEY ENGINEERING MATERIALS (Trans Tech Publications)ISSN: 1013-9826Parameter optimization of HVOF sprayed nanostructured alumina and alumina-nickel composite coatings
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Fält, Teppo; Hannula, Simo-Pekka2006 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Improved mechanical properties by nanoreinforced ceramic composite HVOF coatings
Turunen, Erja; Varis, Tommi; Keskinen, Jari; Fält, Teppo; Hannula, Simo-Pekka2006 in Advances in Science and Technology (Elsevier Science)ISSN: 1662-8969Application of HVOF Techniques for Spraying of Ceramic Coatings
Turunen, Erja; Hirvonen, Ari; Varis, Tommi; Fält, Teppo; Hannula, Simo-Pekka; Sekino, Tohru; Niihara, Koichi2006 in AZojomo (Advancement of Technology)ISSN: 1833-122XInvestigation of magnetic domains in Ni-Mn-Ga alloys with a scanning electron microscope
Ge, Y.; Heczko, O.; Söderberg, O.; Hannula, S. P.; Lindroos, V. K.2005 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)ISSN: 0964-1726Investigation of the magnetic domains of Ni-Mn-Ga alloys with SEM
Ge, Yanling; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka; Lindroos, Veikko2005 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)Recent Breakthrough Development of the MSM Effect in Ni-Mn-Ga Alloys
Söderberg, Outi; Ge, Yanling; Sozinov, Alexei; Hannula, Simo-Pekka; Lindroos, Veikko2005 in SMART MATERIALS AND STRUCTURES (IOP PUBLISHING LTD)Recent breakthrough development of the magnetic shape memory effect in Ni-Mn-Ga alloys
Söderberg, O.; Ge, Y.; Sozinov, A.; Hannula, S. P.; Lindroos, V.K.2005 in SMART MATERIALS AND STRUCTURES (IOP Publishing)ISSN: 0964-1726Tensile/compressive behaviour of non-layered tetragonal Ni52.8Mn25.7Ga21.5 alloy
Söderberg, Outi; Straka, Ladislav; Novak, Vaclav; Heczko, Oleg; Hannula, Simo-Pekka; Lindroos, Veikko2004 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Soundness of spray formed disc shape tools of hot-work steels
Yang, Yunfeng; Hannula, Simo-Pekka2004 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Processing and properties of metal matrix composites synthesized by SHS
Hannula, S. P.; Lintula, P.; Lintunen, P.; Lindroos, T.2003 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Superelastic NiTi coatings with good corrosive wear resistance
Koskinen, Jari; Haimi, Eero; Mahiout, A.; Lindroos, Veikko; Hannula, Simo-Pekka2003 in Journal de Physique IV (EDITIONS PHYSIQUE)Anomalous surface deformation of sapphire clarified by 3D-FEM simulation of the nanoindentation
Nowak, Roman; Manninen, Timo; Li, Chunliang; Heiskanen, Kari; Hannula, Simo-Pekka; Lindroos, Veikko; Soga, Tetsuo; Yoshida, Fusahito2003 in JSME INTERNATIONAL JOURNAL, SERIES A: SOLID MECHANICS AND MATERIAL ENGINEERING (Japan Society of Mechanical Engineers)ISSN: 1344-7912Spray Parameter Optimization and Tribological Properties of Thermally Sprayed Quasicrystalline and Partially Quasicrystalline Coatings
Turunen, Erja; Varis, Tommi; Vierimaa, Kari; Hannula, Simo-Pekka2003 in Proceedings of the Estonian Academy of Sciences Engineering (Estonian Academy Publishers)ISSN: 1406-0175Microstructures and mechanical properties of sprayformed white irons
Yang, Yunfeng; Hirvonen, Ari; Virta, Jouko; Hannula, Simo-Pekka2003 in INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (Maney Publishing)ISSN: 1364-0461Sprayformed hot work steels for rapid tooling
Yang, Yunfeng; Hannula, Simo Pekka2003 in JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY (Chinese Society of Metals)ISSN: 1005-0302Synthesis of silver powder using a mechanochemical process
Keskinen, J.; Ruuskanen, P.; Karttunen, M.; Hannula, S. P.2001 in APPLIED ORGANOMETALLIC CHEMISTRY (John Wiley and Sons Ltd)ISSN: 0268-2605Nitrogen alloying of steel powder using ammonia gas in the fluidized bed
Virta, J.; Hannula, S. P.1999 in Materials Science Forum (Trans Tech Publications)ISSN: 0255-5476Nanoindentation as a composition microprobe for nanolayer composites
Tambwe, M. F.; Stone, D. S.; Hirvonen, J. P.; Suni, I.; Hannula, S. P.1997 in SCRIPTA MATERIALIA (Elsevier Limited)ISSN: 1359-6462Nanolayered gradient structures as an intermediate layer for diamond coatings
Koskinen, J.; Hirvonen, J. P.; Hannula, S. P.; Pischow, K.; Kattelus, H.; Suni, I.1994 in DIAMOND AND RELATED MATERIALS (Elsevier BV)ISSN: 0925-9635Porosity of thin diamond-like carbon films deposited by an arc discharge method
Koskinen, J.; Ehrnstén, U.; Mahiout, A.; Lahtinen, R.; Hirvonen, J. P.; Hannula, S. P.1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)ISSN: 0257-8972Tribological Characteristics of Heat Treated Chromium-Carbon Coatings Prepared from Chromic-Formic Acid Solution
Mahiout, Amar; Peltola, A.; Hannula, Simo-Pekka1992 in TRIBOLOGIA (Suomen Tribologiayhdistys)ISSN: 0780-2285Investigation of some microstructural features related to corrosion initiation in titanium-aluminium nitride coated steel
Ronkainen, H.; Ehrnstén, U.; Zilliacus, R.; Saarilahti, J.; Mahiout, A.; Hannula, S. P.1992 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090A comparative study of the corrosion performance of TiN, Ti(B,N) and (Ti,Al)N coatings produced by physical vapour deposition methods
Aromaa, J.; Ronkainen, H.; Mahiout, A.; Hannula, S. P.; Leyland, A.; Matthews, A.; Matthes, B.; Broszeit, E.1991 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Identification of factors affecting the aqueous corrosion properties of (Ti, Al) N-coated steel
Aromaa, J.; Ronkainen, H.; Mahiout, A.; Hannula, S. P.1991 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)ISSN: 0257-8972Corrosion performance of some titanium-based hard coatings
Matthes, B.; Broszeit, E.; Aromaa, J.; Ronkainen, H.; Hannula, S. P.; Leyland, A.; Matthews, A.1991 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)ISSN: 0257-8972Surface structure and properties of ion-nitrided austenitic stainless steels
Hannula, S. P.; Nenonen, P.; Hirvonen, J. P.1989 in THIN SOLID FILMS (Elsevier Science)ISSN: 0040-6090Electrochemical Determination of the Porosity of Hard Chromium Coatings on Steel
Hannula, Simo-Pekka; Mahiout, Amar; Hakkarainen, T.1989 in METAL FINISHING (Elsevier USA)ISSN: 0026-0576Strain aging and load relaxation behavior of type 316 stainless steel at room temperature
Hannula, S. P.; Korhonen, M. A.; Li, C. Y.1986 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 1073-5623Hardening of graphite surface by ion beam amorphization
Hirvonen, J. P.; Stone, D.; Nastasi, M.; Hannula, S. P.1986 in Scripta Metallurgica (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0036-9748MICROMECHANICAL ASPECTS OF DEFORMATION THEORIES BASED ON A STATE VARIABLE FORMULATION.
Hannula, S. P.; Korhonen, M. A.; Li, C. Y.1985 in Res Mechanica: International Journal of Structural Mechanics and Materials Science (PERGAMON-ELSEVIER SCIENCE LTD)Workhardening correlations based on state variables in some FCC metals in monotonic loading
Korhonen, M. A.; Hannula, S. P.; Li, Che Yu1985 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 0360-2133Repeated load relaxations of type 316 austenitic stainless steel
Hannula, Simo-Pekka; LI, C. -Y.1984 in Scripta Metallurgica (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0036-9748Influence of nitrogen alloying on hydrogen embrittlement in AISI 304-type stainless steels
Hannula, Simo Pekka; Hänninen, Hannu; Tähtinen, Seppo1984 in METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE (Springer Boston)ISSN: 0360-2133The effect of pre-existing epsilonmartensite on the hydrogen induced fracture of austenitic stainless steel
Hannula, Simo-Pekka1983 in Scripta Metallurgica (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0036-9748EVALUATION OF MECHANICAL-PROPERTIES OF THIN WIRES FOR ELECTRICAL INTERCONNECTIONS
Hannula, Simo-Pekka; Wanagel, J.; LI, Che-Yu1983 in IEEE TRANSACTIONS ON COMPONENTS, HYBRIDS AND MANUFACTURING TECHNOLOGY (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC)ISSN: 0148-6411Book section, Chapters in research booksGiant Magnetostrictive Materials
Aaltio, Ilkka; Sozinov, A.; Ge, Yanling; Ullakko, K.; Lindroos, Veikko; Hannula, Simo-Pekka2016 ISBN: 978-0-12-803581-8Self-Lubricating Nano- and Microcomposites for Room and Elevated Temperatures
Cura, Erkin; Söderberg, Outi; Hannula, Simo-Pekka2012 ISBN: 978-1-62081-719-3X-ray and High Resolution Transmission Electron Microscopy Studies of Tetragonal Martensite of Ni-Mn-Ga Alloys
Ge, Yanling; Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2010 ISBN: 978-0-87339-745-2Magnetically Controlled Shape Memory Alloys
Aaltio, Ilkka; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka2009 ISBN: 978-1-4300-4372-3Effect of Magneto-Mechanical Cycling on 10M Ni-Mn-Ga Magnetic Shape Memory Materials
Aaltio, Ilkka; Ge, Yanling; Liu, Xuwen; Tellinen, Juhani; Söderberg, Outi; Hannula, Simo-Pekka2009 ISBN: 978-0-87339-745-2Magnetically activated ferromagnetic shape memory alloys
Aaltio, Ilkka; Heczko, Oleg; Söderberg, Outi; Hannula, Simo-Pekka2009 ISBN: 978-1-4200-4372-3Giant Magnetostrictive Materials
Söderberg, Outi; Ge, Yanling; Sozinov, Alexei; Hannula, Simo-Pekka; Lindroos, Veikko2006 in Handbook of Magnetic Materials (Elsevier Science)ISBN: 978-0-444-63291-3ISSN: 1567-2719Mechanical Properties of Nanostructural Materials
Hannula, Simo-Pekka; Koskinen, Jari; Haimi, Eero; Nowak, Roman2004 State Variable Theories Based on Hart’s Formulation
Korhonen, M.A.; Hannula, Simo-Pekka; Li, Che Yu1987 ISBN: 978-94-010-8039-2Load Relaxation Studies of Solute-Dislocation Interactions During Strain Aging
Hannula, Simo-Pekka; Kuo, Roang-Chin; Henderson, Donald; Li, Che Yu1986 ISBN: 008031872XConference proceedingsMagnetic shape memory - Polymer hybrids
Aaltio, Ilkka; Nilsén, Frans; Lehtonen, Joonas; Ge, Yanling; Spoljaric, Steven; Seppälä, Jukka; Hannula, Simo Pekka2017 in Materials Science Forum (Trans Tech Publications Ltd.)ISBN: 9783035711295ISSN: 0255-5476Pulsed electric current sintered Cr2O3-rGO composites
Cura, M. Erkin; Singh, Vivek Kumar; Viitaharju, Panu; Lehtonen, Joonas; Hannula, Simo Pekka2017 in Key Engineering Materials (Trans Tech Publications Ltd.)ISBN: 9783035710724ISSN: 1013-9826The effect of fire retardants on the fire resistance of unsaturated polyester resin coating
Lipiäinen, Harri; Chen, Qian; Larismaa, Juha; Hannula, Simo Pekka2016 in Key Engineering Materials (Trans Tech Publications Ltd.)ISBN: 9783038356554ISSN: 1013-9826Sintering of nano structural WC with cobalt matrix synthesised from soluble raw materials
Lagerbom, Juha; Kanerva, Ulla; Karhu, Marjaana; Cura, Erkin; Lotta, Juho; Hannula, Simo-Pekka; Turunen, Erja2015 ISBN: 978-1-899072-47-7MSM polymer composite actuator materials
Aaltio, Ilkka; Ge, Yanling; Hirvonen, S.; Hannula, Simo-Pekka2014 Processing and properties of zirconia toughened WC-based cermets
Hussainova, I.; Voltsihhin, N.; Cura, M.Erkin; Hannula, Simo-Pekka2014 in Ceramic Engineering and Science Proceedings (Trans Tech Publications Ltd.)ISBN: 978-111-88-0773-6ISSN: 0196-6219Influence of precursor zirconium carbide powders on the properties of the spark plasma sintered ceramic composite materials
Voltsihhin, N.; Hussainova, Irina; Hannula, Simo-Pekka; Viljus, M.2014 in Ceramic Engineering and Science Proceedings (Trans Tech Publications Ltd.)ISBN: 978-111880727-9ISSN: 0196-6219Microstructure and Properties of Gas Atomized UHCS Compacted by HIP and SPS
Lagerbom, Juha; Virta, Jouko; Lotta, Juho; Honkanen, Katri; Hannula, Simo-Pekka2013 ISBN: 978-189907240-8Pulsed Electric Current Sintering of Gas Atomized Ultrahigh Carbon Steel
Lotta, Juho; Honkanen, Katri; Lagerbom, Juha; Hannula, Simo-Pekka2013 Microstructure and Wear Resistance of Spray Formed and Conventionally Cast High Chromium White Iron
Lotta, Juho; Hannula, Simo-Pekka2013 Toward high temperature tough ceramics
Hussainova, Irina; Yung, DL.; Voltsihhin, Nikolai; Traksmaa, Rainer; Hannula, Simo-Pekka2012 Microstructural Study of Pulsed Electric Current Sinteres High Carbon Fe-Cr-Al-C Alloy
Lotta, Juho; Hannula, Simo-Pekka2012 Effect of Carbon content on sinterability of ZrO2 reinforced WC-Ni cermets
Voltsihhin, N.; Cura, M.Erkin; Hussainova, I.; Viljus, M.; Hannula, Simo-Pekka2012 ISBN: 978-9949-23-265-9Sintering routes for Zirconia doped hardmetals
Voltsihhin, N.; Cura, M.Erkin; Hussainova, I.; Hannula, Simo-Pekka2012 in Proceedings of the 8th International Conference of DAAAM Baltic (DAAAM Baltic)ISBN: 978-994923265-9ISSN: 2346-612XCharacterisation of granulated and sintered chromium oxide powders
Kanerva, Ulla K.; Suhonen, Tomi; Liu, Xuwen; Garcia, Elena; Söderberg, Outi; Hannula, Simo-Pekka; Turunen, Erja2011 Sintering of TiC-Ultimet powders by pulsed electric current sintering and effect of the Ultimet content on the microstructure and mechanical properties
Cura, Mehmet Erkin; Ritasalo, Riina; Kanerva, Ulla; Syrén, Jesse; Oksanen, Jussi; Lotta, Juho; Suhonen, Tomi; Lagerbom, Juha; Söderberg, Outi; Turunen, Erja; Hannula, Simo-Pekka2010 Nanosized Al2O3-ZrO2(Y2O3) nanopowders and their processing
Grabis, J.; Steins, I.; Jankovica, D.; Hannula, S. P.2010 ISBN: 9781899072194Challenges in processing and characterization of thermal sprayed coatings
Hannula, Simo-Pekka; Suhonen, Tomi; Varis, Tommi; Turunen, Erja2010 ISBN: 978-3-9808718-6-0Nano-Sized and Sub-Micron Carbide Powders for Thermal Spraying
Kanerva, Ulla; Oksanen, Jussi; Suhonen, Tomi; Varis, Tommi; Liu, Xuwen; Ge, Yanling; Ritvonen, Tapio; Söderberg, Outi; Turunen, Erja; Hannula, Simo-Pekka2010 Recent development of the magnetic shape memory materials research in Finland
Söderberg, Outi; Aaltio, Ilkka; Ge, Yanling; Soroka, Alexandr; Niemi, Raisa; Liu, Xuwen; Hannula, Simo-Pekka2010 in Materials Research Society Symposium Proceedings (MRS Materials Research Society)ISSN: 0272-9172Introduction to Magnetic Shape Memory Alloys
Söderberg, Outi; Aaltio, Ilkka; Ge, Yanling; Hannula, Simo-Pekka2010 ISBN: 978-989-96697-0-3Formation of Nanocrystalline a-Alumina in Different Morphology from Gel Powder and Boehmite Powder: a Comparative Study
Zhang, Xiaoxue; Ge, Yanling; Hannula, Simo-Pekka; Levänen, Erkki; Mäntylä, Tapio2010 ISBN: 9780470408421Determining the liquidus and ordering temperatures of the ternary Ni-Mn-Ga and quaternary Ni-Mn-Ga-Fe/Cu alloys
Aaltio, I.; Söderberg, Outi; Friman, M.; Glavatskyy, I.; Ge, Y.; Glavatska, N.; Hannula, S-P.2009 ISBN: 978-2-7598-0480-1Determining the liquidus and ordering tempreatures of the ternary Ni-Mn-Ga and quaternary Ni-Mn-Ga-Fe/Cu alloys
Aaltio, Ilkka; Söderberg, Outi; Friman, Michael; Glavatskyy, Illiya; Ge, Yanling; Glavatska, Nadiya; Hannula, Simo-Pekka2009 Microstructure and Wear Behaviour of Powder Metallurgical and Spray Deposited Tool Steels
Ala-Kleme, Sanna; Hannula, Simo-Pekka2009 Synthesis and Characterization of Silver Nanoparticle Rings Embedded in Glass
Chen, Ya; Jaakola, Janne; Ge, Yanling; Saynatjoki, Antti; Tervonen, Ari; Hannula, Simo-Pekka; Honkanen, Seppo2009 ISBN: 978-1-4398-1782-7Sintering of WC-12Co Powders with Different Particle Sizes by Pulsed Electric Current Sintering and Effect of Powder Characteristics on Microstructure and Mechanical Properties
Cura, M.Erkin; Lagerbom, Juha; Lotta, Juho; Liu, Xuwen; Syrén, Jesse; Ritvonen, Tapio; Kanerva, Ulla; Ge, Yanling; Ritasalo, Riina; Söderberg, Outi; Hannula, Simo-Pekka2009 In-situ TEM straining of tetragonal martensite of Ni-Mn-Ga alloy
Ge, Yanling; Zárubová, Niva; Dlabácek, Zdenek; Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2009 ISBN: 978-2-7598-0480-1Effect of aging and solution annealing on transformation and deformation mechanism of super-elastic Ni50.9%-Ti alloy in nano scale
Ghabchi, Arash; Khalil-Allafi, Jafar; Liu, Xuwen; Söderberg, Outi; Turunen, Erja; Hannula, Simo-Pekka2009 ISBN: 978-2-7598-0480-1Powder preparation and comparison of the sintering methods in compaction of the WC-12%Co powder
Lagerbom, Juha; Cura, M.Erkin; Lotta, Juho; Ritvonen, Tapio; Liu, Xuwen; Ge, Yanling; Ritasalo, Riina; Söderberg, Outi; Hannula, Simo-Pekka; Turunen, Erja2009 Soil resistant and self-cleaning surfaces of stainless steel with new Sol-gel and ALD coatings
Mahlberg, Riitta; Mannila, Juha; Romu, Jyrki; Nikkola, Juha; Ilola, Risto; Söderberg, Outi; Koskinen, Jari; Hannula, Simo-Pekka; Mahiout, Amar2008 Modelling the effect of microstructure on mechanical properties of HVOF sprayed WC-CoCr coatings
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Liu, Xuwen; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2008 ISBN: 978-9900563-3-9Wear and chemical resistance of sol-gel coatings on the stainless steel substrate
Vuorio, Tiina; Jaakkola, Jyrki; Kolari, Mika; Mannila, Juha; Nikkola, Juha; Liu, Xuwen; Söderberg, Outi; Mahiout, Amar; Hannula, Simo-Pekka2008 Deformation Properties of Magnetic Shape Memory Materials used in Actuators
Aaltio, Ilkka; Tellinen, Juhani; Ullakko, Kari; Hannula, Simo-Pekka2006 Abrasive Wear Properties of Metal Matrix Composites Produced by Hot Isostatic Pressing
Ala-Kleme, Sanna; Kivikytö-Reponen, Päivi; Liimatainen, Jari; Hellman, Jussi; Hannula, Simo-Pekka2006 Wear Behaviour of APS and HVOF Sprayed Ceramic Coatings
Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Turunen, Erja; Varis, Tommi; Fält, Teppo; Hannula, Simo-Pekka2006 Elastic Property Chracterization of HVOF Sprayed Al2O3 Coatings by Microstructural Analysis
Fält, Teppo; Turunen, Erja; Söderberg, Outi; Suhonen, Tomi; Hannula, Simo-Pekka2006 Development of Nanostructured Al2O3-Ni HVOF Coatings
Hannula, Simo-Pekka; Turunen, Erja; Keskinen, Jari; Varis, Tommi; Fält, Teppo; Gustafsson, Tom E.; Nowak, Roman2006 in Key Engineering Materials (TRANS TECH PUBLICATIONS)ISSN: 1013-9826Microcrack closure effect on indentation testing of thermally sprayed materials
Manninen, Timo; Kouhia, Reijo; Turunen, Erja; Hannula, Simo-Pekka2006 Improved Mechanical Properties by Nanoreinforced HVOF-Sprayed Ceramic Composite Coatings
Turunen, Erja; Varis, Tommi; Gustafsson, Tom; Keskinen, Jari; Lintunen, Pertti; Lintula, Pekka; Hannula, Simo-Pekka2006 in VTT SYMPOSIA (VTT)ISBN: 978-951-38-6311-1ISSN: 0357-9387Development of Precision Spray Forming for Rapid Toolig
Yang, Yunfeng; Hannula, Simo-Pekka2006 Abrasion Resistance of WC Reinforced Steel Matrix Composites
Ala-Kleme, Sanna; Hellman, Jussi; Liimatainen, Jari; Hannula, Simo-Pekka2005 Magnetic shape memory fatigue
Heczko, Oleg; Straka, Ladislav; Söderberg, Outi; Hannula, Simo-Pekka2005 in SPIE Proceedings (SPIE)ISBN: 0-8194-5742-6ISSN: 0277-786XCorrelation between Metal Matrix Composite Structure and Abrasive Wear Performance in Mineral Crushing
Kivikytö-Reponen, Päivi; Liimatainen, Jari; Hellman, Jussi; Hannula, Simo-Pekka2005 Nanoreinforced HVOF-sprayed ceramic coatings, Thermal Spray connects: Explore its surfacing potential
Turunen, Erja; Varis, Tommi; Hannula, Simo-Pekka; Keskinen, Jari; Lintunen, Pertti; Fält, Teppo2005 Process optimization and performance of nanoreinforced HVOF-sprayed ceramic coatings
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Fält, Teppo; Hannula, Simo-Pekka2005 Potential and perspectives of spray forming of near-net shape tools and components
Hannula, Simo-Pekka; Yang, Yunfeng2004 Sprayformed hot work steels for rapid tooling
Yang, Yunfeng; Hannula, Simo-Pekka2004 Functional gradient NiCr-Al2O3 coatings by HVOF
Turunen, E.; Varis, T.; Hannula, S-P; Antila, E.; Gasik, M.2003 Functionally graded HVOF-sprayed NiCr-Al2O3 coatings for demanding applications
Turunen, E.; Varis, T.; Gustafsson, K.; Hannula, S-P; Antila, E.; Gasik, M.2003 Anomalous surface deformation of sapphire claridied by 3D-FEM simulation of the nanoindentation
Nowak, Roman; Manninen, Timo; Li, Chuliang; Heiskanen, Kari; Lindroos, Veikko; Hannula, Simo-Pekka; Soga, Tetsuo; Yoshida, Fusahito2002 Materials and manufacturing technology transfer from contract research organizations to small and medium seed enterprises
Hannula, Simo-Pekka; Salmi, T2000 VTTS RESEARCH-PROGRAM ON SURFACE TECHNOLOGY
Hannula, Simo-Pekka; HIRVONEN, JP1994 in VTT SYMPOSIA (Technical Research Centre of Finland)ISBN: 951-38-4091-3ISSN: 0357-9387ON THE FORMATION OF DEFECTS IN (TI,A1)N-COATINGS ON STEEL
RONKAINEN, H; EHRNSTEN, U; ZILLIACUS, R; SAARILAHTI, J; Hannula, Simo-Pekka1994 in VTT SYMPOSIA (Technical Research Centre of Finland)ISBN: 951-38-4091-3ISSN: 0357-9387Erosion Behaviour of Aluminium Alloy Matrix Composites
Jokinen, Antero; Rauta, Veijo; Virta, Jouko; Mäkipää, Martti; Hannula, Simo-Pekka1993 ISBN: 1-85573-134-7Car tire stud body a novel application of aluminium matrix composites
Jokinen, Antero; Virta, Jouko; Hannula, Simo-Pekka; Kirvesniemi, Aapo1992 in Technology Transfer Series (IITT-lnternational)ISBN: 2-907669-24-9CHARACTERIZATION OF HARD CHROMIUM-CARBON COATINGS PREPARED FROM CHROMIC-FORMIC ACID-SOLUTIONS
MAHIOUT, A; PELTOLA, A; Hannula, Simo-Pekka; HIRVONEN, JP1992 ISBN: 951-96485-0-XMINIATURIZED MECHANICAL TESTING SYSTEM FOR SMALL-SCALE SPECIMEN TESTING
Hannula, Simo-Pekka; Wanagel, J.; Li, Che Yu1986 in ASTM Special Technical Publication (ASTM)ISBN: 0803104405ISSN: 0066-0558Indentation Load Relaxation Studies of Thin Film-Substrate Systems
Stone, Donald; LaFontaine, W.; Ruoff, S.; Hannula, Simo-Pekka; Yost, B.; Li, Che Yu1986 in MRS Proceedings (ASTM)ISSN: 1946-4274USE OF INDENTATION TECHNIQUES FOR CHARACTERIZING WIRE BONDING MATERIALS
Stone, Donald; Ruoff, S.; LaFontaine, W.; Wilson, H.; Hannula, Simo-Pekka; Li, Che Yu1986 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503USE OF INDENTATION TECHNIQUES IN EVALUATING MECHANICAL PROPERTIES OF THIN FILM METALLIZATIONS
Hannula, Simo Pekka; Stone, Donald; Li, Che Yu1985 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503DETERMINATION OF TIME-DEPENDENT PLASTIC PROPERTIES OF METALS BY INDENTATION LOAD RELAXATION TECHNIQUES
Hannula, Simo-Pekka; Stone, Donald; Li, Che Yu1985 in Materials Research Society Symposium - Proceedings (MATERIALS RESEARCH SOCIETY)ISBN: 0931837057ISSN: 0272-9172EFFECTS OF SERVICE AND MATERIAL VARIABLES ON THE FATIGUE BEHAVIOR OF SOLDER JOINTS DURING THE THERMAL CYCLE
Stone, Donald; Hannula, Simo-Pekka; Li, Che Yu1985 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503COMPARATIVE STUDY OF THE MECHANICAL PROPERTIES OF BONDING WIRE
Hannula, S. P.; Wanagel, J.; Li, C. Y.1984 in ASTM special technical publication (ASTM)ISBN: 0803104030ISSN: 0066-0558BULK AND LOCAL RELAXATION PROPERTIES OF METALS.
Hannula, Simo Pekka; Keusseyan, Roupen L.; Wanagel, John; Li, Che Yu1984 CORRELATING THE MECHANICAL PROPERTIES OF FINE WIRE TO ITS PERFORMANCE DURING WIRE BONDING
Hannula, S. P.; Wanagel, J.; Li, C. Y.1984 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503HYDROGEN EFFECTS IN AUSTENITIC STAINLESS STEELS
Hänninen, Hannu; Hannula, Simo Pekka; Tähtinen, Seppo1981 Non-refereed scientific articles
Unrefereed journal articlesDesign, Synthesis, and Characterization of Hybrid Materials
Jeong, Young-Keun; Barboiu, Mihai; Hannula, Simo-Pekka; Kim, Kwang Ho2015 in ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (Hindawi Publishing Corporation)ISSN: 1687-8434Unrefereed conference proceedingsHigh-frequency strain-controlled cycling of Ni-Mn-Ga magnetic shape memory material
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2011 Mechanism of Twinning/detwinning Processes in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Hannula, Simo-Pekka2011 Publications intended for professional communities
Article in professional journalAalto-yliopiston materiaalitekniikan laitos 2013
Hannula, Simo-Pekka2013 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Hybridimateriaalit monitoiminnallisiin ratkaisuihin
Hannula, Simo-Pekka2013 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Multifunktionaaliset Ni-Mn-Ga materiaalit
Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2011 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Materiaalitieteen tutkimus Aalto-yliopiston materiaalitekniikan laitoksella
Hannula, Simo-Pekka2010 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Aalto-yliopiston materiaalitekniikan laitos
Hannula, Simo-Pekka2010 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Materiaaliosaaminen – kansakunnan menestyksen perusta
Haimi, Eero; Hannula, Simo-Pekka2007 in Materia (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Keraamiset nanokomposiitit teräksen pinnoitteena
Turunen, Erja; Arponen, Mikko; Hannula, Simo-Pekka2007 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Materiaalitekniikoiden kehityskohteita Suomessa - metallinjalostajien näkökulma
Hannula, Simo-Pekka; Naumanen, Mika2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Muottien pikavalmistus sulakerrostustekniikalla
Hannula, Simo-Pekka; Yang, Yunfeng2005 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Lisää toiminnallisuutta ja älykkyyttä kumituotteisiin
Söderberg, Outi; Koskinen, Jari; Hannula, Simo-Pekka2005 in Kumiviesti (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Metallurgiasta materiaalitieteeseen
Hannula, Simo-Pekka2004 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Published development or research reportHybridipinnoitteilla lisäarvoa metallituotteille
Mahiout, Amar; Siivinen, Jarmo; Mannila, Juha; Nikkola, Juha; Mahlberg, Riitta; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Virtanen, Jorma; Pehkonen, Antero; Niemi, Raisa; Katajarinne, Tuomas; Koskinen, Jari; Kivivuori, Seppo; Hannula, Simo-Pekka2009 Puhtaat ympäristöystävälliset metallituotteet - Puhteet-projektin loppuraportti
Mahiout, Amar; Mannila, Juha; Mahlberg, Riitta; Nikkola, Juha; Siivinen, Jarmo; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Kolari, Mika; Koskinen, Jari; Hannula, Simo-Pekka2008 Mechanical and damping characteristics of Ni-Mn-Ga alloys
Aaltio, I.; Lahelin, Mika; Söderberg, O.; Heczko, O.; Löfgren, Barbro; Seppälä, Jukka; Hannula, S-P2006 VTT Symposium 244.Applied Material Research at VTT.Symposium on Applied Materials.Espoo, Finland, 8 June 2006.Ritschkoff, Anne-Christine, Koskinen, Jari & Paajanen, Mika (Eds.)
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Lintula, Pekka; Hannula, Simo-Pekka2006 Factors affecting the corrosion resistance of PVD thin films
Aromaa, Jari; Ronkainen, Helena; Saarinen, Kari; Mahiout, Amar; Hannula, Simo-Pekka1995 Patents and invention disclosures
PatentComposite material based on MSM effect
Hannula, Simo-Pekka; Hezcko, O.2015 Thermally sprayed completely amorphic coating
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Hannula, Simo-Pekka2013 COMPOSITE MATERIAL BASED ON MSM EFFECT
Hannula, Simo-Pekka; Heczko, Oleg2010 MSM-efektiin perustuva komposiittielementti; Kompositelement baserat på MSM-effekt
Hannula, Simo-Pekka; Heczko, Oleg2008 Method for the manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2004 Manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, P.; Lintula, P.; Lindroos, T.; Jansson, A.; Hannula, Simo-Pekka2004 METHOD FOR THE MANUFACTURE OF A METAL MATRIX COMPOSITE, AND A METAL MATRIX COMPOSITE
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2003 Menetelmä metallijauheen typettämiseksi; Förfarande för nitrering av metallpulver Method for nitriding of metal powders
Virta, Jouko; Hannula, Simo-Pekka1997 Ni-Mn-Ga-WC hybrids processed by Spark Plasma Sintering
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Lahelin, Mika; Glavatskyy, Ilya; Maki, R.; Hannula, Simo-Pekka2013 In-situ TEM straining of hierarchically twinned non-modulated martensite in Ni-Mn-Ga
Ge, Yanling; Zárubová, Niva; Heczko, Oleg; Hannula, Simo-Pekka2013 In-situ TEM straining of tetragonal martensite in a Ni-Mn-Ga alloy
Zárubová, Niva; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2013 Optical and Magnetic Properties of PECS Compacted Iron Oxide-Silica Coreshell Structures
Mahmed, N; Heczko, O.; Maki, R.; Söderberg, Outi; Haimi, Eero; Hannula, Simo-Pekka2012 New Metastable Structures and Properties of Alloyed Cr2O3 – and Al2O3-based Coatings Powder manufacturing and HVOF Deposition
Suhonen, Tomi; Varis, Tommi; Kanerva, Ulla; Lagerbom, Juha; Liu, Xuwen; Ge, Yanling; Vaajoki, Antti; Söderberg, Outi; Hannula, Simo-Pekka2011 Dislocation Mechanism of Twinning in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Gemperle, Antonín; Hannula, Simo-Pekka2011 Microstructures and Mechanical Properties of Sprayformed White Irons
Yang, Yunfeng; Hirvonen, Ari; Virta, Jouko; Hannula, Simo-Pekka2002 THE USE OF MICROINDENTATION TECHNIQUES FOR CHARACTERIZING MECHANICAL-PROPERTIES OF METALS
Hannula, Simo-Pekka; STONE, D; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDY OF DYNAMIC STRAIN AGING
KUO, RC; Hannula, Simo-Pekka; HENDERSON, DW; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608AN INVESTIGATION OF INCOLOY 800H BY USING LOAD REDUCTION EXPERIMENTS
WILSON, H; KORHONEN, MA; Hannula, Simo-Pekka; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608INDENTATION LOAD RELAXATION TEST
Hannula, Simo-Pekka; STONE, D; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF GRAIN-BOUNDARY SLIDING IN INCOLOY 800H
WILSON, H; Hannula, Simo-Pekka; KORHONEN, MA; SUZUKI, H; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION BEHAVIOR OF SOME COMMERCIALLY PURE FCC-MATERIALS
Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF DEFORMATION MECHANISMS IN ZIRCALOY AND OFHC COPPER AT ELEVATED-TEMPERATURES
WILSON, H; SUZUKI, H; Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608WORKHARDENING AND STATE VARIABLE APPROACH IN COPPER AT ROOM-TEMPERATURE
Hannula, Simo-Pekka; KORHONEN, MA; LI, CY1982 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608
Titania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes
Preparation and Photocatalytic Activity of Quaternary GO/TiO2/Ag/AgCl Nanocomposites
Effect of graphene oxide loading in GO/SiO2/Ag/AgCl photocatalyst
Nanosilver–silica composite Prolonged antibacterial effects and bacterial interaction mechanisms for wound dressings
Highly porous spark plasma sintered Ni-Mn-Ga structures
Aluminum oxide/titanium dioxide nanolaminates grown by atomic layer deposition Growth and mechanical properties
Silica-gentamicin nanohybrids Synthesis and antimicrobial action
Crystal structure and photocatalytic properties of titanate nanotubes prepared by chemical processing and subsequent annealing
Thermal conductivity of amorphous Al2O3/TiO2 nanolaminates deposited by atomic layer deposition
Al2O3-cBN composites sintered by SPS and HPHT methods
Properties of the pulsed electric current sintered Ni-Mn-Ga-Co-WC composites
Neutron Diffraction Study of the Martensitic Transformation and Chemical Order in Heusler Alloy Ni1.91Mn1.29Ga0.8
Friction behavior of alumina/molybdenum composites and formation of MoO_3-x phase at 400 °C
Stress-induced transition from modulated 14M to non-modulated martensite in NiMnGa alloy
A study of hydrogen charging on 10M Ni-Mn-Ga single crystal
Design and Characterization of Hybrid Materials
Microstructural Study of Spray Deposited 2.5C20Cr High Chromium White Iron
Synthesis of Nanosized Silica and Silver-doped Silica Nanoparticles for Heat Transfer Fluids Applications
Characterization of Gas Atomized Ni-Mn-Ga powders
Combined sol-gel and carbothermal synthesis of ZrC-TiC powders for composites
Densification and characterization of sparkplasma sintered ZrCZrO2 composites
On the reliability of nanoindentation hardness of Al2O3 films grown on Si-wafer by atomic layer deposition
Microstructure and wear resistance of spray formed and conventionally cast high-chromium white iron
The magnetic and oxidation behavior of bare and silica-coated magnetite nanoparticles synthesized by reverse co-precipitation of ferrous ion (Fe2+) in ambient atmosphere
Thermal and plasma enhanced atomic layer deposition of SiO2 using commercial silicon precursors
Comparison of the wear and frictional properties of Cu matrix composites prepared by pulsed electric current sintering
Mechanical and thermal properties of pulsed electric current sintered (PECS) Cu-diamond compacts
Lubricating properties of silica/graphene oxide composite powders
Tuning the Mechanical and Adsorption Properties of Silica with Graphene Oxide
Formation Mechanisms, Structure, and Properties of HVOF-Sprayed WC-CoCr Coatings: An Approach Toward Process Maps
Aluminum oxide from trimethylaluminum and water by atomic layer deposition: The temperature dependence of residual stress, elastic modulus, hardness and adhesion
Twinning in shear and uniaxial loading in five layered martensite Ni-Mn-Ga single crystals
Nanoscale surface properties of a Ni-Mn-Ga 10M magnetic shape memory alloy
Neutron diffraction study of a non-stoichiometric Ni-Mn-Ga MSM ALLOY
Neutron diffraction study of Ni-Mn-Ga MSM alloy
The Control of Size and Surface Morphology of Silica Microspheres by Sol-Gel Emulsion Approach
Microstructure and tribological properties of pulsed electric current sintered alumina-zirconia nanocomposites with different solid lubricants
Influence of Hydrochloric Acid Concentrations on the Formation of AgCl-doped Iron Oxide-Silica Coreshell Structures
Influence of sintering temperature on the properties of pulsed electric current sintered hybrid coreshell powders
Microstructural and mechanical characteristics of Cu-Cu2O composites compacted with pulsed electric current sintering and hot isostatic pressing
In-situ TEM study of deformation twinning in Ni-Mn-Ga non-modulated martensite
Effect of synthesis time on morphology of hollow porous silica microspheres
Processing and Properties of Ni-Mn-Ga Magnetic-Shape-Memory Alloy Based Hybrid Materials
Mechanical properties of alumina based nanocomposites
Effects of the sliding conditions on the tribological behavior of atmospheric plasma sprayed Al2O3-15 wt.% ZrO2-CaF2 composite coating
Processing and characterization of porous silica-Ag-nanoparticle composites produced by pulsed electric current sintering
Phase transformation of ironoxidesilica coreshell structure during differential scanning calorimetry and pulsed electric current sintering processes: A comparison
Influence of different synthesis approach on doping behavior of silver nanoparticles onto the iron oxide-silica coreshell surfaces
Thermal stability of PECS-compacted Cu-composites
Densification and microstructure development in zirconia toughened hardmetals
Dislocation Mechanism of Twinning in Ni-Mn-Ga
Long-term cyclic loading of 10M Ni-Mn-Ga alloys
Wear behaviour of HVOF-sprayed nanostructured WC-CoCr coatings
Pulsed Electric Current Sintering of the Al2O3 - 15wt% ZrO2 Nanocomposites with 3 wt% of Different Solid Lubricants
Optical and structural properties of nanocrystalline anatase (TiO2) thin films prepared by non-aqueous sol-gel dip-coating
Effects of Fabricated Method on the Coefficient of Friction of Al2O3-15wt% ZrO2-3 wt% Solid Lubricant Composites
Stabilizing internal stress as the thermodynamic factor of martensite aging effects.
Effect of Annealing on Ag-doped Submicron Silica Powder Prepared with Modified Stöber Method
Novel iron oxide–silica coreshell powders compacted by using pulsed electric current sintering Optical and magnetic properties
Room Temperature Synthesis of Magnetite (Fe3-dO4) Nanoparticles by a Simple Reverse Co-Precipitation Method
Optimization and Characterization of High Velocity Oxy-fuel Sprayed Coatings Techniques, Materials, and Applications
The Microstructural Effects on the Mechanical and Thermal Properties of Pulsed Electric Current Sintered Cu-Al2O3 Composites
Microstructure and properties of Ni-Mn-Ga alloys produced by rapid solidification and pulsed electric current sintering
Crack growth of 10M Ni-Mn-Ga material in cyclic mechanical loading
High-cycle fatigue of 10M Ni-Mn-Ga magnetic shape memory alloy in reversed mechanical loading
High-cycle fatigue of 10M Ni-Mn-Ga magnetic shape memory in reversed mechanical loading
Twin boundary nucleation and motion in Ni-Mn-Ga magnetic shape memory material with a low twinning stress
Mechanische und tribologische Eigenschaften von HVOF-gespritzten keramischen Beschichtungen. Mechanical and tribological properties of HVOF-sprayed ceramic coatings
The Investigated Microstructure and Mechanical Properties of Al2O3/20wt% TiO2 Nanocomposite Coating
Probing structure and microstructure of epitaxial Ni-Mn-Ga films by reciprocal space mapping and pole figure measurements
Behavior of HVOF WC-10Co4Cr coatings with different carbide size in fine and coarse particle abrasion
Effects of Different Solid Lubricants on Mechanical and Tribological Properties of Al2O3/ZrO2 Nanocomposites
Surface pretreatment of austenitic stainless steel and copper by chemical, plasma electrolytic or CO2 cryoblasting techniques for sol-gel coating
Spark plasma sintering of submicron-sized Cu-powder - Influence of processing parameters and powder oxidization on microstructure and mechanical properties
In situ fabrication of waveguide-compatible glass-embedded silver nanoparticle patterns by masked ion-exchange process
Process parameter optimization of pulsed electric current sintering of recycled WC-8Co powder
X-ray Diffraction Reciprocal Space Mapping Study of Modulated Crystal Structures in 10M Ni-Mn-Ga Martensitic Phase
Behovor of HVOF WC-10Co4Cr Coatings with Different Carbide Size in Fine Particle Slurry Abrasion
Processing of Hybrid Materials for Components with Improved Life-Time
Correlation of material characteristics and wear in laboratory scale cone crusher
DMA testing of Ni-Mn-Ga/polymer composites
The Symmetry-Conforming Theory of Martensite Aging
The role of anisotropic thermal expansion of shape memory alloys in their functional properties
The Effect of Microstructure on mechanical properties of HVOF sprayed WC-CoCr composite coatings
Process study on the formation of nanocrystalline alpha-alumina with novel morphology at 1000 degrees C
Temperature dependence of the damping properties of Ni-Mn-Ga alloys
Temperature dependence of mechanical damping in Ni-Mn-Ga austenite and non-modulated martensite
Comparison of different methods for studying magnetic domains in Ni-Mn-Ga martensites
Strain and concurrent magnetization changes in magnetic shape memory NiMnGa single crystals experiment and model
Magnetic shape memory effect in thin foils
Temperature dependence of magnetically induced deformation of Ni-Mn-Ga martensite
Stress induced martensite variant reorientation in magnetic shape memory Ni-Mn-Ga single crystal studied by neutron diffraction
In situ neutron diffraction study of magnetic field induced martensite reorientation in Ni-Mn-Ga under constant stress
Ni-Mn-Ga multifunctional compounds
Recent developments of magnetic SMA
Development of precision spray forming for rapid tooling
Nanocrystalline gamma-alumina and alfa-alumina from Boehmite nanoflakes
Nanocrystalline α-alumina with novel morphology at 1000 °c
Uudet urheilumateriaalit
Abrasive wear properties of tool steel matrix composites in rubber wheel abrasion test and laboratory cone crusher experiments
Comparison between Plasma- and HVOF-Sprayed Ceramic Coatings Part 2: Tribological Behaviour
Comparison between Plasma- and HVOF-Sprayed Ceramic Coatings Part 1: Microstructure and Mechanical Properties
Submicron-sized hybrid SiO2-Ni powders produced with the sol-gel method
Synthesis and properties of solgel submicron silica powders doped with iron crystallites
Synthesis and properties of sol-gel submicron silica powders doped with partly oxidized iron particles
Submicronsized hybrid SiO2-Ni0 powders by the sol-gel method
Crystal structure and high-temperature magnetoplasticity in the new Ni-Mn-Ga-Cu magnetic shape memory alloys
Neutron diffraction studies of magnetic-shape memory Ni-Mn-Ga single crystal
A piezopaint-based sensor for monitoring structure dynamics
Structural monitoring by using piezopaint sensors
Morphology of ferromagnetic sol-gel submicron silica powders doped with iron and nickel particles
Application of HVOF Techniques for Spraying of Ceramic Coatings
Abrasive Wear Properties of Metal Matrix Composites Produced by Hot Isostatic Pressing
Magnetic domain evolution with applied field in a Ni-Mn-Ga magnetic shape memory alloy
Crystal structure and macrotwin interface of five-layered martensite in Ni-Mn-Ga magnetic shape memory alloy
Direct optical observation of magnetic domains in Ni-Mn-Ga martensite
Effect of alloying on the phase transformation and magnetic shape memory in Ni-Mn-Ga compounds
Transformation temperatures and magnetoplasticity of Ni-Mn-Ga alloyed with Si, In, Co or Fe
Mechanical Properties of Nanocrystalline HVOF Coatings
Shape Memory Alloys for Biomedical Applications
Magnetic indication of the stress-induced martensitic transformation in ferromagnetic Ni-Mn-Ga alloy
Stress dependence of magnetic shape memory effect and its model
Time-dependent magnetostrain and thermal phonons in the Ni-Mn-Ga magnetic shape-memory alloys
Temperature Dependence of Reversible Field-Induced Strain in Ni-Mn-Ga Single Crystals
Effect of intermartensitic reaction on the co-occurrence of the magnetic and structural transition in Ni-Mn-Ga alloys
Development of Nano-reinforced HVOF Sprayed Ceramic Coatings
On the role of particle state and deposition procedure on mechanical, tribological and dielectric response of high velocity oxy-fuel sprayed alumina coatings
Process optimization for nanostructured HVOF-sprayed Al2O3-based ceramic coatings
Parameter optimization of HVOF sprayed nanostructured alumina and alumina-nickel composite coatings
Improved mechanical properties by nanoreinforced ceramic composite HVOF coatings
Application of HVOF Techniques for Spraying of Ceramic Coatings
Investigation of magnetic domains in Ni-Mn-Ga alloys with a scanning electron microscope
Investigation of the magnetic domains of Ni-Mn-Ga alloys with SEM
Recent Breakthrough Development of the MSM Effect in Ni-Mn-Ga Alloys
Recent breakthrough development of the magnetic shape memory effect in Ni-Mn-Ga alloys
Tensile/compressive behaviour of non-layered tetragonal Ni52.8Mn25.7Ga21.5 alloy
Soundness of spray formed disc shape tools of hot-work steels
Processing and properties of metal matrix composites synthesized by SHS
Superelastic NiTi coatings with good corrosive wear resistance
Anomalous surface deformation of sapphire clarified by 3D-FEM simulation of the nanoindentation
Spray Parameter Optimization and Tribological Properties of Thermally Sprayed Quasicrystalline and Partially Quasicrystalline Coatings
Microstructures and mechanical properties of sprayformed white irons
Sprayformed hot work steels for rapid tooling
Synthesis of silver powder using a mechanochemical process
Nitrogen alloying of steel powder using ammonia gas in the fluidized bed
Nanoindentation as a composition microprobe for nanolayer composites
Nanolayered gradient structures as an intermediate layer for diamond coatings
Porosity of thin diamond-like carbon films deposited by an arc discharge method
Tribological Characteristics of Heat Treated Chromium-Carbon Coatings Prepared from Chromic-Formic Acid Solution
Investigation of some microstructural features related to corrosion initiation in titanium-aluminium nitride coated steel
A comparative study of the corrosion performance of TiN, Ti(B,N) and (Ti,Al)N coatings produced by physical vapour deposition methods
Identification of factors affecting the aqueous corrosion properties of (Ti, Al) N-coated steel
Corrosion performance of some titanium-based hard coatings
Surface structure and properties of ion-nitrided austenitic stainless steels
Electrochemical Determination of the Porosity of Hard Chromium Coatings on Steel
Strain aging and load relaxation behavior of type 316 stainless steel at room temperature
Hardening of graphite surface by ion beam amorphization
MICROMECHANICAL ASPECTS OF DEFORMATION THEORIES BASED ON A STATE VARIABLE FORMULATION.
Workhardening correlations based on state variables in some FCC metals in monotonic loading
Repeated load relaxations of type 316 austenitic stainless steel
Influence of nitrogen alloying on hydrogen embrittlement in AISI 304-type stainless steels
The effect of pre-existing epsilonmartensite on the hydrogen induced fracture of austenitic stainless steel
EVALUATION OF MECHANICAL-PROPERTIES OF THIN WIRES FOR ELECTRICAL INTERCONNECTIONS
Giant Magnetostrictive Materials
Self-Lubricating Nano- and Microcomposites for Room and Elevated Temperatures
X-ray and High Resolution Transmission Electron Microscopy Studies of Tetragonal Martensite of Ni-Mn-Ga Alloys
Magnetically Controlled Shape Memory Alloys
Effect of Magneto-Mechanical Cycling on 10M Ni-Mn-Ga Magnetic Shape Memory Materials
Magnetically activated ferromagnetic shape memory alloys
Giant Magnetostrictive Materials
Mechanical Properties of Nanostructural Materials
State Variable Theories Based on Hart’s Formulation
Load Relaxation Studies of Solute-Dislocation Interactions During Strain Aging
Conference proceedingsMagnetic shape memory - Polymer hybrids
Aaltio, Ilkka; Nilsén, Frans; Lehtonen, Joonas; Ge, Yanling; Spoljaric, Steven; Seppälä, Jukka; Hannula, Simo Pekka2017 in Materials Science Forum (Trans Tech Publications Ltd.)ISBN: 9783035711295ISSN: 0255-5476Pulsed electric current sintered Cr2O3-rGO composites
Cura, M. Erkin; Singh, Vivek Kumar; Viitaharju, Panu; Lehtonen, Joonas; Hannula, Simo Pekka2017 in Key Engineering Materials (Trans Tech Publications Ltd.)ISBN: 9783035710724ISSN: 1013-9826The effect of fire retardants on the fire resistance of unsaturated polyester resin coating
Lipiäinen, Harri; Chen, Qian; Larismaa, Juha; Hannula, Simo Pekka2016 in Key Engineering Materials (Trans Tech Publications Ltd.)ISBN: 9783038356554ISSN: 1013-9826Sintering of nano structural WC with cobalt matrix synthesised from soluble raw materials
Lagerbom, Juha; Kanerva, Ulla; Karhu, Marjaana; Cura, Erkin; Lotta, Juho; Hannula, Simo-Pekka; Turunen, Erja2015 ISBN: 978-1-899072-47-7MSM polymer composite actuator materials
Aaltio, Ilkka; Ge, Yanling; Hirvonen, S.; Hannula, Simo-Pekka2014 Processing and properties of zirconia toughened WC-based cermets
Hussainova, I.; Voltsihhin, N.; Cura, M.Erkin; Hannula, Simo-Pekka2014 in Ceramic Engineering and Science Proceedings (Trans Tech Publications Ltd.)ISBN: 978-111-88-0773-6ISSN: 0196-6219Influence of precursor zirconium carbide powders on the properties of the spark plasma sintered ceramic composite materials
Voltsihhin, N.; Hussainova, Irina; Hannula, Simo-Pekka; Viljus, M.2014 in Ceramic Engineering and Science Proceedings (Trans Tech Publications Ltd.)ISBN: 978-111880727-9ISSN: 0196-6219Microstructure and Properties of Gas Atomized UHCS Compacted by HIP and SPS
Lagerbom, Juha; Virta, Jouko; Lotta, Juho; Honkanen, Katri; Hannula, Simo-Pekka2013 ISBN: 978-189907240-8Pulsed Electric Current Sintering of Gas Atomized Ultrahigh Carbon Steel
Lotta, Juho; Honkanen, Katri; Lagerbom, Juha; Hannula, Simo-Pekka2013 Microstructure and Wear Resistance of Spray Formed and Conventionally Cast High Chromium White Iron
Lotta, Juho; Hannula, Simo-Pekka2013 Toward high temperature tough ceramics
Hussainova, Irina; Yung, DL.; Voltsihhin, Nikolai; Traksmaa, Rainer; Hannula, Simo-Pekka2012 Microstructural Study of Pulsed Electric Current Sinteres High Carbon Fe-Cr-Al-C Alloy
Lotta, Juho; Hannula, Simo-Pekka2012 Effect of Carbon content on sinterability of ZrO2 reinforced WC-Ni cermets
Voltsihhin, N.; Cura, M.Erkin; Hussainova, I.; Viljus, M.; Hannula, Simo-Pekka2012 ISBN: 978-9949-23-265-9Sintering routes for Zirconia doped hardmetals
Voltsihhin, N.; Cura, M.Erkin; Hussainova, I.; Hannula, Simo-Pekka2012 in Proceedings of the 8th International Conference of DAAAM Baltic (DAAAM Baltic)ISBN: 978-994923265-9ISSN: 2346-612XCharacterisation of granulated and sintered chromium oxide powders
Kanerva, Ulla K.; Suhonen, Tomi; Liu, Xuwen; Garcia, Elena; Söderberg, Outi; Hannula, Simo-Pekka; Turunen, Erja2011 Sintering of TiC-Ultimet powders by pulsed electric current sintering and effect of the Ultimet content on the microstructure and mechanical properties
Cura, Mehmet Erkin; Ritasalo, Riina; Kanerva, Ulla; Syrén, Jesse; Oksanen, Jussi; Lotta, Juho; Suhonen, Tomi; Lagerbom, Juha; Söderberg, Outi; Turunen, Erja; Hannula, Simo-Pekka2010 Nanosized Al2O3-ZrO2(Y2O3) nanopowders and their processing
Grabis, J.; Steins, I.; Jankovica, D.; Hannula, S. P.2010 ISBN: 9781899072194Challenges in processing and characterization of thermal sprayed coatings
Hannula, Simo-Pekka; Suhonen, Tomi; Varis, Tommi; Turunen, Erja2010 ISBN: 978-3-9808718-6-0Nano-Sized and Sub-Micron Carbide Powders for Thermal Spraying
Kanerva, Ulla; Oksanen, Jussi; Suhonen, Tomi; Varis, Tommi; Liu, Xuwen; Ge, Yanling; Ritvonen, Tapio; Söderberg, Outi; Turunen, Erja; Hannula, Simo-Pekka2010 Recent development of the magnetic shape memory materials research in Finland
Söderberg, Outi; Aaltio, Ilkka; Ge, Yanling; Soroka, Alexandr; Niemi, Raisa; Liu, Xuwen; Hannula, Simo-Pekka2010 in Materials Research Society Symposium Proceedings (MRS Materials Research Society)ISSN: 0272-9172Introduction to Magnetic Shape Memory Alloys
Söderberg, Outi; Aaltio, Ilkka; Ge, Yanling; Hannula, Simo-Pekka2010 ISBN: 978-989-96697-0-3Formation of Nanocrystalline a-Alumina in Different Morphology from Gel Powder and Boehmite Powder: a Comparative Study
Zhang, Xiaoxue; Ge, Yanling; Hannula, Simo-Pekka; Levänen, Erkki; Mäntylä, Tapio2010 ISBN: 9780470408421Determining the liquidus and ordering temperatures of the ternary Ni-Mn-Ga and quaternary Ni-Mn-Ga-Fe/Cu alloys
Aaltio, I.; Söderberg, Outi; Friman, M.; Glavatskyy, I.; Ge, Y.; Glavatska, N.; Hannula, S-P.2009 ISBN: 978-2-7598-0480-1Determining the liquidus and ordering tempreatures of the ternary Ni-Mn-Ga and quaternary Ni-Mn-Ga-Fe/Cu alloys
Aaltio, Ilkka; Söderberg, Outi; Friman, Michael; Glavatskyy, Illiya; Ge, Yanling; Glavatska, Nadiya; Hannula, Simo-Pekka2009 Microstructure and Wear Behaviour of Powder Metallurgical and Spray Deposited Tool Steels
Ala-Kleme, Sanna; Hannula, Simo-Pekka2009 Synthesis and Characterization of Silver Nanoparticle Rings Embedded in Glass
Chen, Ya; Jaakola, Janne; Ge, Yanling; Saynatjoki, Antti; Tervonen, Ari; Hannula, Simo-Pekka; Honkanen, Seppo2009 ISBN: 978-1-4398-1782-7Sintering of WC-12Co Powders with Different Particle Sizes by Pulsed Electric Current Sintering and Effect of Powder Characteristics on Microstructure and Mechanical Properties
Cura, M.Erkin; Lagerbom, Juha; Lotta, Juho; Liu, Xuwen; Syrén, Jesse; Ritvonen, Tapio; Kanerva, Ulla; Ge, Yanling; Ritasalo, Riina; Söderberg, Outi; Hannula, Simo-Pekka2009 In-situ TEM straining of tetragonal martensite of Ni-Mn-Ga alloy
Ge, Yanling; Zárubová, Niva; Dlabácek, Zdenek; Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2009 ISBN: 978-2-7598-0480-1Effect of aging and solution annealing on transformation and deformation mechanism of super-elastic Ni50.9%-Ti alloy in nano scale
Ghabchi, Arash; Khalil-Allafi, Jafar; Liu, Xuwen; Söderberg, Outi; Turunen, Erja; Hannula, Simo-Pekka2009 ISBN: 978-2-7598-0480-1Powder preparation and comparison of the sintering methods in compaction of the WC-12%Co powder
Lagerbom, Juha; Cura, M.Erkin; Lotta, Juho; Ritvonen, Tapio; Liu, Xuwen; Ge, Yanling; Ritasalo, Riina; Söderberg, Outi; Hannula, Simo-Pekka; Turunen, Erja2009 Soil resistant and self-cleaning surfaces of stainless steel with new Sol-gel and ALD coatings
Mahlberg, Riitta; Mannila, Juha; Romu, Jyrki; Nikkola, Juha; Ilola, Risto; Söderberg, Outi; Koskinen, Jari; Hannula, Simo-Pekka; Mahiout, Amar2008 Modelling the effect of microstructure on mechanical properties of HVOF sprayed WC-CoCr coatings
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Liu, Xuwen; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2008 ISBN: 978-9900563-3-9Wear and chemical resistance of sol-gel coatings on the stainless steel substrate
Vuorio, Tiina; Jaakkola, Jyrki; Kolari, Mika; Mannila, Juha; Nikkola, Juha; Liu, Xuwen; Söderberg, Outi; Mahiout, Amar; Hannula, Simo-Pekka2008 Deformation Properties of Magnetic Shape Memory Materials used in Actuators
Aaltio, Ilkka; Tellinen, Juhani; Ullakko, Kari; Hannula, Simo-Pekka2006 Abrasive Wear Properties of Metal Matrix Composites Produced by Hot Isostatic Pressing
Ala-Kleme, Sanna; Kivikytö-Reponen, Päivi; Liimatainen, Jari; Hellman, Jussi; Hannula, Simo-Pekka2006 Wear Behaviour of APS and HVOF Sprayed Ceramic Coatings
Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Turunen, Erja; Varis, Tommi; Fält, Teppo; Hannula, Simo-Pekka2006 Elastic Property Chracterization of HVOF Sprayed Al2O3 Coatings by Microstructural Analysis
Fält, Teppo; Turunen, Erja; Söderberg, Outi; Suhonen, Tomi; Hannula, Simo-Pekka2006 Development of Nanostructured Al2O3-Ni HVOF Coatings
Hannula, Simo-Pekka; Turunen, Erja; Keskinen, Jari; Varis, Tommi; Fält, Teppo; Gustafsson, Tom E.; Nowak, Roman2006 in Key Engineering Materials (TRANS TECH PUBLICATIONS)ISSN: 1013-9826Microcrack closure effect on indentation testing of thermally sprayed materials
Manninen, Timo; Kouhia, Reijo; Turunen, Erja; Hannula, Simo-Pekka2006 Improved Mechanical Properties by Nanoreinforced HVOF-Sprayed Ceramic Composite Coatings
Turunen, Erja; Varis, Tommi; Gustafsson, Tom; Keskinen, Jari; Lintunen, Pertti; Lintula, Pekka; Hannula, Simo-Pekka2006 in VTT SYMPOSIA (VTT)ISBN: 978-951-38-6311-1ISSN: 0357-9387Development of Precision Spray Forming for Rapid Toolig
Yang, Yunfeng; Hannula, Simo-Pekka2006 Abrasion Resistance of WC Reinforced Steel Matrix Composites
Ala-Kleme, Sanna; Hellman, Jussi; Liimatainen, Jari; Hannula, Simo-Pekka2005 Magnetic shape memory fatigue
Heczko, Oleg; Straka, Ladislav; Söderberg, Outi; Hannula, Simo-Pekka2005 in SPIE Proceedings (SPIE)ISBN: 0-8194-5742-6ISSN: 0277-786XCorrelation between Metal Matrix Composite Structure and Abrasive Wear Performance in Mineral Crushing
Kivikytö-Reponen, Päivi; Liimatainen, Jari; Hellman, Jussi; Hannula, Simo-Pekka2005 Nanoreinforced HVOF-sprayed ceramic coatings, Thermal Spray connects: Explore its surfacing potential
Turunen, Erja; Varis, Tommi; Hannula, Simo-Pekka; Keskinen, Jari; Lintunen, Pertti; Fält, Teppo2005 Process optimization and performance of nanoreinforced HVOF-sprayed ceramic coatings
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Fält, Teppo; Hannula, Simo-Pekka2005 Potential and perspectives of spray forming of near-net shape tools and components
Hannula, Simo-Pekka; Yang, Yunfeng2004 Sprayformed hot work steels for rapid tooling
Yang, Yunfeng; Hannula, Simo-Pekka2004 Functional gradient NiCr-Al2O3 coatings by HVOF
Turunen, E.; Varis, T.; Hannula, S-P; Antila, E.; Gasik, M.2003 Functionally graded HVOF-sprayed NiCr-Al2O3 coatings for demanding applications
Turunen, E.; Varis, T.; Gustafsson, K.; Hannula, S-P; Antila, E.; Gasik, M.2003 Anomalous surface deformation of sapphire claridied by 3D-FEM simulation of the nanoindentation
Nowak, Roman; Manninen, Timo; Li, Chuliang; Heiskanen, Kari; Lindroos, Veikko; Hannula, Simo-Pekka; Soga, Tetsuo; Yoshida, Fusahito2002 Materials and manufacturing technology transfer from contract research organizations to small and medium seed enterprises
Hannula, Simo-Pekka; Salmi, T2000 VTTS RESEARCH-PROGRAM ON SURFACE TECHNOLOGY
Hannula, Simo-Pekka; HIRVONEN, JP1994 in VTT SYMPOSIA (Technical Research Centre of Finland)ISBN: 951-38-4091-3ISSN: 0357-9387ON THE FORMATION OF DEFECTS IN (TI,A1)N-COATINGS ON STEEL
RONKAINEN, H; EHRNSTEN, U; ZILLIACUS, R; SAARILAHTI, J; Hannula, Simo-Pekka1994 in VTT SYMPOSIA (Technical Research Centre of Finland)ISBN: 951-38-4091-3ISSN: 0357-9387Erosion Behaviour of Aluminium Alloy Matrix Composites
Jokinen, Antero; Rauta, Veijo; Virta, Jouko; Mäkipää, Martti; Hannula, Simo-Pekka1993 ISBN: 1-85573-134-7Car tire stud body a novel application of aluminium matrix composites
Jokinen, Antero; Virta, Jouko; Hannula, Simo-Pekka; Kirvesniemi, Aapo1992 in Technology Transfer Series (IITT-lnternational)ISBN: 2-907669-24-9CHARACTERIZATION OF HARD CHROMIUM-CARBON COATINGS PREPARED FROM CHROMIC-FORMIC ACID-SOLUTIONS
MAHIOUT, A; PELTOLA, A; Hannula, Simo-Pekka; HIRVONEN, JP1992 ISBN: 951-96485-0-XMINIATURIZED MECHANICAL TESTING SYSTEM FOR SMALL-SCALE SPECIMEN TESTING
Hannula, Simo-Pekka; Wanagel, J.; Li, Che Yu1986 in ASTM Special Technical Publication (ASTM)ISBN: 0803104405ISSN: 0066-0558Indentation Load Relaxation Studies of Thin Film-Substrate Systems
Stone, Donald; LaFontaine, W.; Ruoff, S.; Hannula, Simo-Pekka; Yost, B.; Li, Che Yu1986 in MRS Proceedings (ASTM)ISSN: 1946-4274USE OF INDENTATION TECHNIQUES FOR CHARACTERIZING WIRE BONDING MATERIALS
Stone, Donald; Ruoff, S.; LaFontaine, W.; Wilson, H.; Hannula, Simo-Pekka; Li, Che Yu1986 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503USE OF INDENTATION TECHNIQUES IN EVALUATING MECHANICAL PROPERTIES OF THIN FILM METALLIZATIONS
Hannula, Simo Pekka; Stone, Donald; Li, Che Yu1985 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503DETERMINATION OF TIME-DEPENDENT PLASTIC PROPERTIES OF METALS BY INDENTATION LOAD RELAXATION TECHNIQUES
Hannula, Simo-Pekka; Stone, Donald; Li, Che Yu1985 in Materials Research Society Symposium - Proceedings (MATERIALS RESEARCH SOCIETY)ISBN: 0931837057ISSN: 0272-9172EFFECTS OF SERVICE AND MATERIAL VARIABLES ON THE FATIGUE BEHAVIOR OF SOLDER JOINTS DURING THE THERMAL CYCLE
Stone, Donald; Hannula, Simo-Pekka; Li, Che Yu1985 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503COMPARATIVE STUDY OF THE MECHANICAL PROPERTIES OF BONDING WIRE
Hannula, S. P.; Wanagel, J.; Li, C. Y.1984 in ASTM special technical publication (ASTM)ISBN: 0803104030ISSN: 0066-0558BULK AND LOCAL RELAXATION PROPERTIES OF METALS.
Hannula, Simo Pekka; Keusseyan, Roupen L.; Wanagel, John; Li, Che Yu1984 CORRELATING THE MECHANICAL PROPERTIES OF FINE WIRE TO ITS PERFORMANCE DURING WIRE BONDING
Hannula, S. P.; Wanagel, J.; Li, C. Y.1984 in Proceedings - Electronic Components and Technology Conference (IEEE)ISSN: 0569-5503HYDROGEN EFFECTS IN AUSTENITIC STAINLESS STEELS
Hänninen, Hannu; Hannula, Simo Pekka; Tähtinen, Seppo1981 Non-refereed scientific articles
Unrefereed journal articlesDesign, Synthesis, and Characterization of Hybrid Materials
Jeong, Young-Keun; Barboiu, Mihai; Hannula, Simo-Pekka; Kim, Kwang Ho2015 in ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (Hindawi Publishing Corporation)ISSN: 1687-8434Unrefereed conference proceedingsHigh-frequency strain-controlled cycling of Ni-Mn-Ga magnetic shape memory material
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2011 Mechanism of Twinning/detwinning Processes in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Hannula, Simo-Pekka2011 Publications intended for professional communities
Article in professional journalAalto-yliopiston materiaalitekniikan laitos 2013
Hannula, Simo-Pekka2013 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Hybridimateriaalit monitoiminnallisiin ratkaisuihin
Hannula, Simo-Pekka2013 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Multifunktionaaliset Ni-Mn-Ga materiaalit
Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2011 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Materiaalitieteen tutkimus Aalto-yliopiston materiaalitekniikan laitoksella
Hannula, Simo-Pekka2010 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Aalto-yliopiston materiaalitekniikan laitos
Hannula, Simo-Pekka2010 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Materiaaliosaaminen – kansakunnan menestyksen perusta
Haimi, Eero; Hannula, Simo-Pekka2007 in Materia (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Keraamiset nanokomposiitit teräksen pinnoitteena
Turunen, Erja; Arponen, Mikko; Hannula, Simo-Pekka2007 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Materiaalitekniikoiden kehityskohteita Suomessa - metallinjalostajien näkökulma
Hannula, Simo-Pekka; Naumanen, Mika2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Muottien pikavalmistus sulakerrostustekniikalla
Hannula, Simo-Pekka; Yang, Yunfeng2005 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Lisää toiminnallisuutta ja älykkyyttä kumituotteisiin
Söderberg, Outi; Koskinen, Jari; Hannula, Simo-Pekka2005 in Kumiviesti (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Metallurgiasta materiaalitieteeseen
Hannula, Simo-Pekka2004 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Published development or research reportHybridipinnoitteilla lisäarvoa metallituotteille
Mahiout, Amar; Siivinen, Jarmo; Mannila, Juha; Nikkola, Juha; Mahlberg, Riitta; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Virtanen, Jorma; Pehkonen, Antero; Niemi, Raisa; Katajarinne, Tuomas; Koskinen, Jari; Kivivuori, Seppo; Hannula, Simo-Pekka2009 Puhtaat ympäristöystävälliset metallituotteet - Puhteet-projektin loppuraportti
Mahiout, Amar; Mannila, Juha; Mahlberg, Riitta; Nikkola, Juha; Siivinen, Jarmo; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Kolari, Mika; Koskinen, Jari; Hannula, Simo-Pekka2008 Mechanical and damping characteristics of Ni-Mn-Ga alloys
Aaltio, I.; Lahelin, Mika; Söderberg, O.; Heczko, O.; Löfgren, Barbro; Seppälä, Jukka; Hannula, S-P2006 VTT Symposium 244.Applied Material Research at VTT.Symposium on Applied Materials.Espoo, Finland, 8 June 2006.Ritschkoff, Anne-Christine, Koskinen, Jari & Paajanen, Mika (Eds.)
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Lintula, Pekka; Hannula, Simo-Pekka2006 Factors affecting the corrosion resistance of PVD thin films
Aromaa, Jari; Ronkainen, Helena; Saarinen, Kari; Mahiout, Amar; Hannula, Simo-Pekka1995 Patents and invention disclosures
PatentComposite material based on MSM effect
Hannula, Simo-Pekka; Hezcko, O.2015 Thermally sprayed completely amorphic coating
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Hannula, Simo-Pekka2013 COMPOSITE MATERIAL BASED ON MSM EFFECT
Hannula, Simo-Pekka; Heczko, Oleg2010 MSM-efektiin perustuva komposiittielementti; Kompositelement baserat på MSM-effekt
Hannula, Simo-Pekka; Heczko, Oleg2008 Method for the manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2004 Manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, P.; Lintula, P.; Lindroos, T.; Jansson, A.; Hannula, Simo-Pekka2004 METHOD FOR THE MANUFACTURE OF A METAL MATRIX COMPOSITE, AND A METAL MATRIX COMPOSITE
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2003 Menetelmä metallijauheen typettämiseksi; Förfarande för nitrering av metallpulver Method for nitriding of metal powders
Virta, Jouko; Hannula, Simo-Pekka1997 Ni-Mn-Ga-WC hybrids processed by Spark Plasma Sintering
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Lahelin, Mika; Glavatskyy, Ilya; Maki, R.; Hannula, Simo-Pekka2013 In-situ TEM straining of hierarchically twinned non-modulated martensite in Ni-Mn-Ga
Ge, Yanling; Zárubová, Niva; Heczko, Oleg; Hannula, Simo-Pekka2013 In-situ TEM straining of tetragonal martensite in a Ni-Mn-Ga alloy
Zárubová, Niva; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2013 Optical and Magnetic Properties of PECS Compacted Iron Oxide-Silica Coreshell Structures
Mahmed, N; Heczko, O.; Maki, R.; Söderberg, Outi; Haimi, Eero; Hannula, Simo-Pekka2012 New Metastable Structures and Properties of Alloyed Cr2O3 – and Al2O3-based Coatings Powder manufacturing and HVOF Deposition
Suhonen, Tomi; Varis, Tommi; Kanerva, Ulla; Lagerbom, Juha; Liu, Xuwen; Ge, Yanling; Vaajoki, Antti; Söderberg, Outi; Hannula, Simo-Pekka2011 Dislocation Mechanism of Twinning in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Gemperle, Antonín; Hannula, Simo-Pekka2011 Microstructures and Mechanical Properties of Sprayformed White Irons
Yang, Yunfeng; Hirvonen, Ari; Virta, Jouko; Hannula, Simo-Pekka2002 THE USE OF MICROINDENTATION TECHNIQUES FOR CHARACTERIZING MECHANICAL-PROPERTIES OF METALS
Hannula, Simo-Pekka; STONE, D; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDY OF DYNAMIC STRAIN AGING
KUO, RC; Hannula, Simo-Pekka; HENDERSON, DW; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608AN INVESTIGATION OF INCOLOY 800H BY USING LOAD REDUCTION EXPERIMENTS
WILSON, H; KORHONEN, MA; Hannula, Simo-Pekka; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608INDENTATION LOAD RELAXATION TEST
Hannula, Simo-Pekka; STONE, D; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF GRAIN-BOUNDARY SLIDING IN INCOLOY 800H
WILSON, H; Hannula, Simo-Pekka; KORHONEN, MA; SUZUKI, H; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION BEHAVIOR OF SOME COMMERCIALLY PURE FCC-MATERIALS
Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF DEFORMATION MECHANISMS IN ZIRCALOY AND OFHC COPPER AT ELEVATED-TEMPERATURES
WILSON, H; SUZUKI, H; Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608WORKHARDENING AND STATE VARIABLE APPROACH IN COPPER AT ROOM-TEMPERATURE
Hannula, Simo-Pekka; KORHONEN, MA; LI, CY1982 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608
Magnetic shape memory - Polymer hybrids
Pulsed electric current sintered Cr2O3-rGO composites
The effect of fire retardants on the fire resistance of unsaturated polyester resin coating
Sintering of nano structural WC with cobalt matrix synthesised from soluble raw materials
MSM polymer composite actuator materials
Processing and properties of zirconia toughened WC-based cermets
Influence of precursor zirconium carbide powders on the properties of the spark plasma sintered ceramic composite materials
Microstructure and Properties of Gas Atomized UHCS Compacted by HIP and SPS
Pulsed Electric Current Sintering of Gas Atomized Ultrahigh Carbon Steel
Microstructure and Wear Resistance of Spray Formed and Conventionally Cast High Chromium White Iron
Toward high temperature tough ceramics
Microstructural Study of Pulsed Electric Current Sinteres High Carbon Fe-Cr-Al-C Alloy
Effect of Carbon content on sinterability of ZrO2 reinforced WC-Ni cermets
Sintering routes for Zirconia doped hardmetals
Characterisation of granulated and sintered chromium oxide powders
Sintering of TiC-Ultimet powders by pulsed electric current sintering and effect of the Ultimet content on the microstructure and mechanical properties
Nanosized Al2O3-ZrO2(Y2O3) nanopowders and their processing
Challenges in processing and characterization of thermal sprayed coatings
Nano-Sized and Sub-Micron Carbide Powders for Thermal Spraying
Recent development of the magnetic shape memory materials research in Finland
Introduction to Magnetic Shape Memory Alloys
Formation of Nanocrystalline a-Alumina in Different Morphology from Gel Powder and Boehmite Powder: a Comparative Study
Determining the liquidus and ordering temperatures of the ternary Ni-Mn-Ga and quaternary Ni-Mn-Ga-Fe/Cu alloys
Determining the liquidus and ordering tempreatures of the ternary Ni-Mn-Ga and quaternary Ni-Mn-Ga-Fe/Cu alloys
Microstructure and Wear Behaviour of Powder Metallurgical and Spray Deposited Tool Steels
Synthesis and Characterization of Silver Nanoparticle Rings Embedded in Glass
Sintering of WC-12Co Powders with Different Particle Sizes by Pulsed Electric Current Sintering and Effect of Powder Characteristics on Microstructure and Mechanical Properties
In-situ TEM straining of tetragonal martensite of Ni-Mn-Ga alloy
Effect of aging and solution annealing on transformation and deformation mechanism of super-elastic Ni50.9%-Ti alloy in nano scale
Powder preparation and comparison of the sintering methods in compaction of the WC-12%Co powder
Soil resistant and self-cleaning surfaces of stainless steel with new Sol-gel and ALD coatings
Modelling the effect of microstructure on mechanical properties of HVOF sprayed WC-CoCr coatings
Wear and chemical resistance of sol-gel coatings on the stainless steel substrate
Deformation Properties of Magnetic Shape Memory Materials used in Actuators
Abrasive Wear Properties of Metal Matrix Composites Produced by Hot Isostatic Pressing
Wear Behaviour of APS and HVOF Sprayed Ceramic Coatings
Elastic Property Chracterization of HVOF Sprayed Al2O3 Coatings by Microstructural Analysis
Development of Nanostructured Al2O3-Ni HVOF Coatings
Microcrack closure effect on indentation testing of thermally sprayed materials
Improved Mechanical Properties by Nanoreinforced HVOF-Sprayed Ceramic Composite Coatings
Development of Precision Spray Forming for Rapid Toolig
Abrasion Resistance of WC Reinforced Steel Matrix Composites
Magnetic shape memory fatigue
Correlation between Metal Matrix Composite Structure and Abrasive Wear Performance in Mineral Crushing
Nanoreinforced HVOF-sprayed ceramic coatings, Thermal Spray connects: Explore its surfacing potential
Process optimization and performance of nanoreinforced HVOF-sprayed ceramic coatings
Potential and perspectives of spray forming of near-net shape tools and components
Sprayformed hot work steels for rapid tooling
Functional gradient NiCr-Al2O3 coatings by HVOF
Functionally graded HVOF-sprayed NiCr-Al2O3 coatings for demanding applications
Anomalous surface deformation of sapphire claridied by 3D-FEM simulation of the nanoindentation
Materials and manufacturing technology transfer from contract research organizations to small and medium seed enterprises
VTTS RESEARCH-PROGRAM ON SURFACE TECHNOLOGY
ON THE FORMATION OF DEFECTS IN (TI,A1)N-COATINGS ON STEEL
Erosion Behaviour of Aluminium Alloy Matrix Composites
Car tire stud body a novel application of aluminium matrix composites
CHARACTERIZATION OF HARD CHROMIUM-CARBON COATINGS PREPARED FROM CHROMIC-FORMIC ACID-SOLUTIONS
MINIATURIZED MECHANICAL TESTING SYSTEM FOR SMALL-SCALE SPECIMEN TESTING
Indentation Load Relaxation Studies of Thin Film-Substrate Systems
USE OF INDENTATION TECHNIQUES FOR CHARACTERIZING WIRE BONDING MATERIALS
USE OF INDENTATION TECHNIQUES IN EVALUATING MECHANICAL PROPERTIES OF THIN FILM METALLIZATIONS
DETERMINATION OF TIME-DEPENDENT PLASTIC PROPERTIES OF METALS BY INDENTATION LOAD RELAXATION TECHNIQUES
EFFECTS OF SERVICE AND MATERIAL VARIABLES ON THE FATIGUE BEHAVIOR OF SOLDER JOINTS DURING THE THERMAL CYCLE
COMPARATIVE STUDY OF THE MECHANICAL PROPERTIES OF BONDING WIRE
BULK AND LOCAL RELAXATION PROPERTIES OF METALS.
CORRELATING THE MECHANICAL PROPERTIES OF FINE WIRE TO ITS PERFORMANCE DURING WIRE BONDING
HYDROGEN EFFECTS IN AUSTENITIC STAINLESS STEELS
Design, Synthesis, and Characterization of Hybrid Materials
Unrefereed conference proceedingsHigh-frequency strain-controlled cycling of Ni-Mn-Ga magnetic shape memory material
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Hannula, Simo-Pekka2011 Mechanism of Twinning/detwinning Processes in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Hannula, Simo-Pekka2011 Publications intended for professional communities
Article in professional journalAalto-yliopiston materiaalitekniikan laitos 2013
Hannula, Simo-Pekka2013 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Hybridimateriaalit monitoiminnallisiin ratkaisuihin
Hannula, Simo-Pekka2013 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Multifunktionaaliset Ni-Mn-Ga materiaalit
Aaltio, Ilkka; Söderberg, Outi; Hannula, Simo-Pekka2011 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Materiaalitieteen tutkimus Aalto-yliopiston materiaalitekniikan laitoksella
Hannula, Simo-Pekka2010 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)ISSN: 1459-9694Aalto-yliopiston materiaalitekniikan laitos
Hannula, Simo-Pekka2010 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Materiaaliosaaminen – kansakunnan menestyksen perusta
Haimi, Eero; Hannula, Simo-Pekka2007 in Materia (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Keraamiset nanokomposiitit teräksen pinnoitteena
Turunen, Erja; Arponen, Mikko; Hannula, Simo-Pekka2007 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Materiaalitekniikoiden kehityskohteita Suomessa - metallinjalostajien näkökulma
Hannula, Simo-Pekka; Naumanen, Mika2006 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Muottien pikavalmistus sulakerrostustekniikalla
Hannula, Simo-Pekka; Yang, Yunfeng2005 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Lisää toiminnallisuutta ja älykkyyttä kumituotteisiin
Söderberg, Outi; Koskinen, Jari; Hannula, Simo-Pekka2005 in Kumiviesti (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Metallurgiasta materiaalitieteeseen
Hannula, Simo-Pekka2004 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Published development or research reportHybridipinnoitteilla lisäarvoa metallituotteille
Mahiout, Amar; Siivinen, Jarmo; Mannila, Juha; Nikkola, Juha; Mahlberg, Riitta; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Virtanen, Jorma; Pehkonen, Antero; Niemi, Raisa; Katajarinne, Tuomas; Koskinen, Jari; Kivivuori, Seppo; Hannula, Simo-Pekka2009 Puhtaat ympäristöystävälliset metallituotteet - Puhteet-projektin loppuraportti
Mahiout, Amar; Mannila, Juha; Mahlberg, Riitta; Nikkola, Juha; Siivinen, Jarmo; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Kolari, Mika; Koskinen, Jari; Hannula, Simo-Pekka2008 Mechanical and damping characteristics of Ni-Mn-Ga alloys
Aaltio, I.; Lahelin, Mika; Söderberg, O.; Heczko, O.; Löfgren, Barbro; Seppälä, Jukka; Hannula, S-P2006 VTT Symposium 244.Applied Material Research at VTT.Symposium on Applied Materials.Espoo, Finland, 8 June 2006.Ritschkoff, Anne-Christine, Koskinen, Jari & Paajanen, Mika (Eds.)
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Lintula, Pekka; Hannula, Simo-Pekka2006 Factors affecting the corrosion resistance of PVD thin films
Aromaa, Jari; Ronkainen, Helena; Saarinen, Kari; Mahiout, Amar; Hannula, Simo-Pekka1995 Patents and invention disclosures
PatentComposite material based on MSM effect
Hannula, Simo-Pekka; Hezcko, O.2015 Thermally sprayed completely amorphic coating
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Hannula, Simo-Pekka2013 COMPOSITE MATERIAL BASED ON MSM EFFECT
Hannula, Simo-Pekka; Heczko, Oleg2010 MSM-efektiin perustuva komposiittielementti; Kompositelement baserat på MSM-effekt
Hannula, Simo-Pekka; Heczko, Oleg2008 Method for the manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2004 Manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, P.; Lintula, P.; Lindroos, T.; Jansson, A.; Hannula, Simo-Pekka2004 METHOD FOR THE MANUFACTURE OF A METAL MATRIX COMPOSITE, AND A METAL MATRIX COMPOSITE
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2003 Menetelmä metallijauheen typettämiseksi; Förfarande för nitrering av metallpulver Method for nitriding of metal powders
Virta, Jouko; Hannula, Simo-Pekka1997 Ni-Mn-Ga-WC hybrids processed by Spark Plasma Sintering
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Lahelin, Mika; Glavatskyy, Ilya; Maki, R.; Hannula, Simo-Pekka2013 In-situ TEM straining of hierarchically twinned non-modulated martensite in Ni-Mn-Ga
Ge, Yanling; Zárubová, Niva; Heczko, Oleg; Hannula, Simo-Pekka2013 In-situ TEM straining of tetragonal martensite in a Ni-Mn-Ga alloy
Zárubová, Niva; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2013 Optical and Magnetic Properties of PECS Compacted Iron Oxide-Silica Coreshell Structures
Mahmed, N; Heczko, O.; Maki, R.; Söderberg, Outi; Haimi, Eero; Hannula, Simo-Pekka2012 New Metastable Structures and Properties of Alloyed Cr2O3 – and Al2O3-based Coatings Powder manufacturing and HVOF Deposition
Suhonen, Tomi; Varis, Tommi; Kanerva, Ulla; Lagerbom, Juha; Liu, Xuwen; Ge, Yanling; Vaajoki, Antti; Söderberg, Outi; Hannula, Simo-Pekka2011 Dislocation Mechanism of Twinning in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Gemperle, Antonín; Hannula, Simo-Pekka2011 Microstructures and Mechanical Properties of Sprayformed White Irons
Yang, Yunfeng; Hirvonen, Ari; Virta, Jouko; Hannula, Simo-Pekka2002 THE USE OF MICROINDENTATION TECHNIQUES FOR CHARACTERIZING MECHANICAL-PROPERTIES OF METALS
Hannula, Simo-Pekka; STONE, D; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDY OF DYNAMIC STRAIN AGING
KUO, RC; Hannula, Simo-Pekka; HENDERSON, DW; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608AN INVESTIGATION OF INCOLOY 800H BY USING LOAD REDUCTION EXPERIMENTS
WILSON, H; KORHONEN, MA; Hannula, Simo-Pekka; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608INDENTATION LOAD RELAXATION TEST
Hannula, Simo-Pekka; STONE, D; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF GRAIN-BOUNDARY SLIDING IN INCOLOY 800H
WILSON, H; Hannula, Simo-Pekka; KORHONEN, MA; SUZUKI, H; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION BEHAVIOR OF SOME COMMERCIALLY PURE FCC-MATERIALS
Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF DEFORMATION MECHANISMS IN ZIRCALOY AND OFHC COPPER AT ELEVATED-TEMPERATURES
WILSON, H; SUZUKI, H; Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608WORKHARDENING AND STATE VARIABLE APPROACH IN COPPER AT ROOM-TEMPERATURE
Hannula, Simo-Pekka; KORHONEN, MA; LI, CY1982 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608
High-frequency strain-controlled cycling of Ni-Mn-Ga magnetic shape memory material
Mechanism of Twinning/detwinning Processes in NiMnGa
Aalto-yliopiston materiaalitekniikan laitos 2013
Hybridimateriaalit monitoiminnallisiin ratkaisuihin
Multifunktionaaliset Ni-Mn-Ga materiaalit
Materiaalitieteen tutkimus Aalto-yliopiston materiaalitekniikan laitoksella
Aalto-yliopiston materiaalitekniikan laitos
Materiaaliosaaminen – kansakunnan menestyksen perusta
Keraamiset nanokomposiitit teräksen pinnoitteena
Materiaalitekniikoiden kehityskohteita Suomessa - metallinjalostajien näkökulma
Muottien pikavalmistus sulakerrostustekniikalla
Lisää toiminnallisuutta ja älykkyyttä kumituotteisiin
Metallurgiasta materiaalitieteeseen
Published development or research reportHybridipinnoitteilla lisäarvoa metallituotteille
Mahiout, Amar; Siivinen, Jarmo; Mannila, Juha; Nikkola, Juha; Mahlberg, Riitta; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Virtanen, Jorma; Pehkonen, Antero; Niemi, Raisa; Katajarinne, Tuomas; Koskinen, Jari; Kivivuori, Seppo; Hannula, Simo-Pekka2009 Puhtaat ympäristöystävälliset metallituotteet - Puhteet-projektin loppuraportti
Mahiout, Amar; Mannila, Juha; Mahlberg, Riitta; Nikkola, Juha; Siivinen, Jarmo; Romu, Jyrki; Ilola, Risto; Söderberg, Outi; Kolari, Mika; Koskinen, Jari; Hannula, Simo-Pekka2008 Mechanical and damping characteristics of Ni-Mn-Ga alloys
Aaltio, I.; Lahelin, Mika; Söderberg, O.; Heczko, O.; Löfgren, Barbro; Seppälä, Jukka; Hannula, S-P2006 VTT Symposium 244.Applied Material Research at VTT.Symposium on Applied Materials.Espoo, Finland, 8 June 2006.Ritschkoff, Anne-Christine, Koskinen, Jari & Paajanen, Mika (Eds.)
Turunen, Erja; Varis, Tommi; Gustafsson, Tom E.; Keskinen, Jari; Lintunen, Pertti; Lintula, Pekka; Hannula, Simo-Pekka2006 Factors affecting the corrosion resistance of PVD thin films
Aromaa, Jari; Ronkainen, Helena; Saarinen, Kari; Mahiout, Amar; Hannula, Simo-Pekka1995 Patents and invention disclosures
PatentComposite material based on MSM effect
Hannula, Simo-Pekka; Hezcko, O.2015 Thermally sprayed completely amorphic coating
Suhonen, Tomi; Varis, Tommi; Turunen, Erja; Hannula, Simo-Pekka2013 COMPOSITE MATERIAL BASED ON MSM EFFECT
Hannula, Simo-Pekka; Heczko, Oleg2010 MSM-efektiin perustuva komposiittielementti; Kompositelement baserat på MSM-effekt
Hannula, Simo-Pekka; Heczko, Oleg2008 Method for the manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2004 Manufacture of a metal matrix composite, and a metal matrix composite
Lintunen, P.; Lintula, P.; Lindroos, T.; Jansson, A.; Hannula, Simo-Pekka2004 METHOD FOR THE MANUFACTURE OF A METAL MATRIX COMPOSITE, AND A METAL MATRIX COMPOSITE
Lintunen, Pertti; Lintula, Pekka; Lindroos, Tomi; Jansson, Anssi; Hannula, Simo-Pekka2003 Menetelmä metallijauheen typettämiseksi; Förfarande för nitrering av metallpulver Method for nitriding of metal powders
Virta, Jouko; Hannula, Simo-Pekka1997 Ni-Mn-Ga-WC hybrids processed by Spark Plasma Sintering
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Lahelin, Mika; Glavatskyy, Ilya; Maki, R.; Hannula, Simo-Pekka2013 In-situ TEM straining of hierarchically twinned non-modulated martensite in Ni-Mn-Ga
Ge, Yanling; Zárubová, Niva; Heczko, Oleg; Hannula, Simo-Pekka2013 In-situ TEM straining of tetragonal martensite in a Ni-Mn-Ga alloy
Zárubová, Niva; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2013 Optical and Magnetic Properties of PECS Compacted Iron Oxide-Silica Coreshell Structures
Mahmed, N; Heczko, O.; Maki, R.; Söderberg, Outi; Haimi, Eero; Hannula, Simo-Pekka2012 New Metastable Structures and Properties of Alloyed Cr2O3 – and Al2O3-based Coatings Powder manufacturing and HVOF Deposition
Suhonen, Tomi; Varis, Tommi; Kanerva, Ulla; Lagerbom, Juha; Liu, Xuwen; Ge, Yanling; Vaajoki, Antti; Söderberg, Outi; Hannula, Simo-Pekka2011 Dislocation Mechanism of Twinning in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Gemperle, Antonín; Hannula, Simo-Pekka2011 Microstructures and Mechanical Properties of Sprayformed White Irons
Yang, Yunfeng; Hirvonen, Ari; Virta, Jouko; Hannula, Simo-Pekka2002 THE USE OF MICROINDENTATION TECHNIQUES FOR CHARACTERIZING MECHANICAL-PROPERTIES OF METALS
Hannula, Simo-Pekka; STONE, D; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDY OF DYNAMIC STRAIN AGING
KUO, RC; Hannula, Simo-Pekka; HENDERSON, DW; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608AN INVESTIGATION OF INCOLOY 800H BY USING LOAD REDUCTION EXPERIMENTS
WILSON, H; KORHONEN, MA; Hannula, Simo-Pekka; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608INDENTATION LOAD RELAXATION TEST
Hannula, Simo-Pekka; STONE, D; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF GRAIN-BOUNDARY SLIDING IN INCOLOY 800H
WILSON, H; Hannula, Simo-Pekka; KORHONEN, MA; SUZUKI, H; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION BEHAVIOR OF SOME COMMERCIALLY PURE FCC-MATERIALS
Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF DEFORMATION MECHANISMS IN ZIRCALOY AND OFHC COPPER AT ELEVATED-TEMPERATURES
WILSON, H; SUZUKI, H; Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608WORKHARDENING AND STATE VARIABLE APPROACH IN COPPER AT ROOM-TEMPERATURE
Hannula, Simo-Pekka; KORHONEN, MA; LI, CY1982 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608
Hybridipinnoitteilla lisäarvoa metallituotteille
Puhtaat ympäristöystävälliset metallituotteet - Puhteet-projektin loppuraportti
Mechanical and damping characteristics of Ni-Mn-Ga alloys
VTT Symposium 244.Applied Material Research at VTT.Symposium on Applied Materials.Espoo, Finland, 8 June 2006.Ritschkoff, Anne-Christine, Koskinen, Jari & Paajanen, Mika (Eds.)
Factors affecting the corrosion resistance of PVD thin films
Composite material based on MSM effect
Thermally sprayed completely amorphic coating
COMPOSITE MATERIAL BASED ON MSM EFFECT
MSM-efektiin perustuva komposiittielementti; Kompositelement baserat på MSM-effekt
Method for the manufacture of a metal matrix composite, and a metal matrix composite
Manufacture of a metal matrix composite, and a metal matrix composite
METHOD FOR THE MANUFACTURE OF A METAL MATRIX COMPOSITE, AND A METAL MATRIX COMPOSITE
Menetelmä metallijauheen typettämiseksi; Förfarande för nitrering av metallpulver Method for nitriding of metal powders
Ni-Mn-Ga-WC hybrids processed by Spark Plasma Sintering
Aaltio, Ilkka; Ge, Yanling; Söderberg, Outi; Lahelin, Mika; Glavatskyy, Ilya; Maki, R.; Hannula, Simo-Pekka2013 In-situ TEM straining of hierarchically twinned non-modulated martensite in Ni-Mn-Ga
Ge, Yanling; Zárubová, Niva; Heczko, Oleg; Hannula, Simo-Pekka2013 In-situ TEM straining of tetragonal martensite in a Ni-Mn-Ga alloy
Zárubová, Niva; Ge, Yanling; Heczko, Oleg; Hannula, Simo-Pekka2013 Optical and Magnetic Properties of PECS Compacted Iron Oxide-Silica Coreshell Structures
Mahmed, N; Heczko, O.; Maki, R.; Söderberg, Outi; Haimi, Eero; Hannula, Simo-Pekka2012 New Metastable Structures and Properties of Alloyed Cr2O3 – and Al2O3-based Coatings Powder manufacturing and HVOF Deposition
Suhonen, Tomi; Varis, Tommi; Kanerva, Ulla; Lagerbom, Juha; Liu, Xuwen; Ge, Yanling; Vaajoki, Antti; Söderberg, Outi; Hannula, Simo-Pekka2011 Dislocation Mechanism of Twinning in NiMnGa
Zárubová, Niva; Ge, Yanling; Gemperlová, Juliana; Gemperle, Antonín; Hannula, Simo-Pekka2011 Microstructures and Mechanical Properties of Sprayformed White Irons
Yang, Yunfeng; Hirvonen, Ari; Virta, Jouko; Hannula, Simo-Pekka2002 THE USE OF MICROINDENTATION TECHNIQUES FOR CHARACTERIZING MECHANICAL-PROPERTIES OF METALS
Hannula, Simo-Pekka; STONE, D; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDY OF DYNAMIC STRAIN AGING
KUO, RC; Hannula, Simo-Pekka; HENDERSON, DW; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608AN INVESTIGATION OF INCOLOY 800H BY USING LOAD REDUCTION EXPERIMENTS
WILSON, H; KORHONEN, MA; Hannula, Simo-Pekka; LI, CY1985 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608INDENTATION LOAD RELAXATION TEST
Hannula, Simo-Pekka; STONE, D; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF GRAIN-BOUNDARY SLIDING IN INCOLOY 800H
WILSON, H; Hannula, Simo-Pekka; KORHONEN, MA; SUZUKI, H; LI, CY1984 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION BEHAVIOR OF SOME COMMERCIALLY PURE FCC-MATERIALS
Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608LOAD RELAXATION STUDIES OF DEFORMATION MECHANISMS IN ZIRCALOY AND OFHC COPPER AT ELEVATED-TEMPERATURES
WILSON, H; SUZUKI, H; Hannula, Simo-Pekka; LI, CY1983 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608WORKHARDENING AND STATE VARIABLE APPROACH IN COPPER AT ROOM-TEMPERATURE
Hannula, Simo-Pekka; KORHONEN, MA; LI, CY1982 in Journal of Metals (MINERALS METALS MATERIALS SOC)ISSN: 0148-6608
Ni-Mn-Ga-WC hybrids processed by Spark Plasma Sintering
In-situ TEM straining of hierarchically twinned non-modulated martensite in Ni-Mn-Ga
In-situ TEM straining of tetragonal martensite in a Ni-Mn-Ga alloy
Optical and Magnetic Properties of PECS Compacted Iron Oxide-Silica Coreshell Structures
New Metastable Structures and Properties of Alloyed Cr2O3 – and Al2O3-based Coatings Powder manufacturing and HVOF Deposition
Dislocation Mechanism of Twinning in NiMnGa
Microstructures and Mechanical Properties of Sprayformed White Irons
THE USE OF MICROINDENTATION TECHNIQUES FOR CHARACTERIZING MECHANICAL-PROPERTIES OF METALS
LOAD RELAXATION STUDY OF DYNAMIC STRAIN AGING
AN INVESTIGATION OF INCOLOY 800H BY USING LOAD REDUCTION EXPERIMENTS
INDENTATION LOAD RELAXATION TEST
LOAD RELAXATION STUDIES OF GRAIN-BOUNDARY SLIDING IN INCOLOY 800H
LOAD RELAXATION BEHAVIOR OF SOME COMMERCIALLY PURE FCC-MATERIALS
LOAD RELAXATION STUDIES OF DEFORMATION MECHANISMS IN ZIRCALOY AND OFHC COPPER AT ELEVATED-TEMPERATURES
WORKHARDENING AND STATE VARIABLE APPROACH IN COPPER AT ROOM-TEMPERATURE
Read about executive education
Other experts
Elizabeth Durango Cohen
Elizabeth Durango-Cohen is a Visiting Associate Professor of Managerial Economics and Decision Sciences at Kellogg and an Associate Professor of Operations Management at the Illinois Institute of Technology's Stuart School of Business. Dr. Durango-Cohen completed her Ph.D. in Industrial Engineeri...
Susan Gross Sholinsky
Ms. Sholinsky: • Advises employers in all facets of employment law, including compliance with EEO laws and other statutes governing the workplace • Assists employers with respect to the development of personnel policies and procedures, employee discipline, leaves of absence, accommodation, workp...
Looking for an expert?
Contact us and we'll find the best option for you.