Jouni Partanen

Peer-reviewed scientific articles

Journal article-refereed, Original research

Nanofibrillar cellulose-alginate hydrogel coated surgical sutures as cell-carrier systems

Laurén, Patrick; Somersalo, Petter; Pitkänen, Irina; Lou, Yan Ru; Urtti, Arto; Partanen, Jouni; Seppälä, Jukka; Madetoja, Mari; Laaksonen, Timo; Mäkitie, Antti; Yliperttula, Marjo

2017 in PLOS ONE (PUBLIC LIBRARY SCIENCE)

ISSN: 1932-6203

Eco-design practices with a focus on quantitative environmental targets An exploratory content analysis within ICT sector

Sihvonen, Siru; Partanen, Jouni

2017 in JOURNAL OF CLEANER PRODUCTION (ELSEVIER SCI LTD)

ISSN: 0959-6526

Challenges to implementing additive manufacturing in globalised production environments

Flores Ituarte, Inigo; Haghighat Khajavi, Siavash; Partanen, Jouni

2016 in INTERNATIONAL JOURNAL OF COLLABORATIVE ENTERPRISE (ELSEVIER SCI LTD)

ISSN: 1740-2085

The direct digital manufacturing (r)evolution definition of a research agenda

Holmström, Jan; Holweg, Matthias; Haghighat Khajavi, Siavash; Partanen, Jouni

2016 in OPERATIONS MANAGEMENT RESEARCH (Springer New York)

ISSN: 1936-9735

Fabrication of graphene-based 3D structures by stereolithography

Korhonen, Harri; Le, Hoang Sinh; Nguyen Dang, Luong; Lehtinen, Pekka; Verho, Tuukka; Partanen, Jouni; Seppälä, Jukka

2016 in PHYSICA STATUS SOLIDI A: APPLICATIONS AND MATERIALS SCIENCE (WILEY-V C H VERLAG GMBH)

ISSN: 1862-6300

Human stem cell decorated nanocellulose threads for biomedical applications

Mertaniemi, Henrikki; Escobedo-Lucea, Carmen; Sanz-Garcia, Andres; Gandía, Carolina; Mäkitie, Antti; Partanen, Jouni; Ikkala, Olli; Yliperttula, Marjo

2016 in BIOMATERIALS (ELSEVIER SCI LTD)

ISSN: 0142-9612

Implementing environmental considerations within product development practices a survey on employees' perspectives

Sihvonen, Siru; Partanen, Jouni

2016 in JOURNAL OF CLEANER PRODUCTION (ELSEVIER SCI LTD)

ISSN: 0959-6526

Post-processing opportunities of professional and consumer grade 3D printing equipment: a comparative study

Flores, Iñigo; Chekurov, Sergei; Salmi, Mika; Tuomi, Jukka; Partanen, Jouni

2015 in INTERNATIONAL JOURNAL OF RAPID MANUFACTURING (ELSEVIER SCI LTD)

ISSN: 1757-8825

Additive Manufacturing in Production: A Study Case Applying Technical Requirements

Flores, Iñigo; Coatanea, Erik; Salmi, Mika; Tuomi, Jukka; Partanen, Jouni

2015 in PHYSICS PROCEDIA (Elsevier BV)

Risk reduction in new product launch: A hybrid approach combining direct digital and tool-based manufacturing

Haghighat Khajavi, Siavash; Partanen, Jouni; Holmström, Jan; Tuomi, Jukka

2015 in COMPUTERS IN INDUSTRY (Elsevier)

ISSN: 0166-3615

Cost Estimation of Laser Additive Manufacturing of Stainless Steel

Piili, Heidi; Happonen, Ari; Väistö, Tapio; Venkataramanan, Vijaikrishnan; Partanen, Jouni; Salminen, Antti

2015 in PHYSICS PROCEDIA (Elsevier BV)

ISSN: 1875-3892

Additive Manufacturing in the Spare Parts Supply Chain

Haghighat Khajavi, Siavash; Partanen, Jouni; Holmström, Jan

2014 in COMPUTERS IN INDUSTRY (Elsevier)

ISSN: 0166-3615

Digital manufacturing-driven transformations of service supply chains for complex products

Holmström, Jan; Partanen, Jouni

2014 in SUPPLY CHAIN MANAGEMENT: AN INTERNATIONAL JOURNAL (Emerald Group Publishing Ltd.)

ISSN: 1359-8546

Controlling Penetration Depth in Projection Stereolithography by Adjusting the Operation Wavelength

Lehtinen, P.; Laurila, S.; Kaivola, M.; Partanen, Jouni

2014 in KEY ENGINEERING MATERIALS (Trans Tech Publications)

ISSN: 1013-9826

Multitool and multi-axis computer numerically controlled accumulation for fabricating conformal features on curved surfaces

Pan, Yayue; Zhou, Chi; Chen, Yong; Partanen, Jouni

2014 in JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING: TRANSACTIONS OF THE ASME (ASME-AMER SOC MECHANICAL ENG)

ISSN: 1087-1357

Novel additive manufactured scaffolds for tissue engineered trachea research

Mäkitie, Antti A.; Korpela, Jyrki; Elomaa, Laura; Reivonen, Maija; Kokkari, Anne; Malin, Minna; Korhonen, Harri; Wang, Xiaohong; Salo, Jarmo; Sihvo, Eero; Salmi, Mika; Partanen, Jouni; Paloheimo, Kaija-Stiina; Tuomi, Jukka; Närhi, Timo; Seppälä, Jukka

2013 in ACTA OTO-LARYNGOLOGICA (TAYLOR & FRANCIS LTD)

ISSN: 0001-6489

Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment

Holmström, Jan; Partanen, Jouni; Tuomi, Jukka; Walter, Manfred

2010 in JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (Emerald Group Publishing Ltd.)

ISSN: 1741-038X

Thermodynamics and kinetics of KDP crystal growth from binary and ternary solutions

Enqvist, Y.; Partanen, J.; Louhi-Kultanen, M.; Kallas, J.

2003 in CHEMICAL ENGINEERING RESEARCH AND DESIGN (INST CHEMICAL ENGINEERS)

ISSN: 0263-8762

The influence of multicomponent diffusion on crystal growth in electrolyte solutions

Louhi-Kultanen, M.; Kallas, J.; Partanen, J.; Sha, Z.; Oinas, P.; Palosaari, S.

2001 in CHEMICAL ENGINEERING SCIENCE (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 0009-2509

Band mobility of photoexcited electrons in Bi₁₂SiO ₂₀

Biaggio, Ivan; Hellwarth, Robert W.; Partanen, Jouni P.

1997 in PHYSICAL REVIEW LETTERS (AMERICAN PHYSICAL SOC)

ISSN: 0031-9007

Four-wave-mixing interferometer

Tang, N.; Partanen, J. P.

1996 in OPTICS LETTERS (OPTICAL SOC AMER)

ISSN: 0146-9592

Optical limiting in protonic doped bis-benzothiazole

Tang, N.; Hellwarth, R. W.; Partanen, J. P.; Sun, S.; Dalton, L. R.

1995 in Materials Research Society Symposium Proceedings (Materials Research Society)

ISSN: 0272-9172

Measurement of the excited-state molecular polarizability of C60

Tang, N.; Hellwarth, R. W.; Partanen, J. P.

1995 in MRS Online Proceedings (Materials Research Society)

ISSN: 1946-4274

A thin atomic vapor as a nonlinear optical medium

Ai, B.; Glassner, D. S.; Knize, R. J.; Partanen, J. P.

1994 in APPLIED PHYSICS LETTERS (AMERICAN INSTITUTE OF PHYSICS)

ISSN: 0003-6951

Optical image processing by an atomic vapour

Biaggio, Ivan; Partanen, Jouni P.; Ai, B.; Knize, R. J.; Hellwarth, Robert W.

1994 in NATURE (NATURE PUBLISHING GROUP)

ISSN: 0028-0836

Optical correlator that uses cesium vapor

Biaggio, Ivan; Ai, B.; Knize, R. J.; Partanen, Jouni P.; Hellwarth, Robert W.

1994 in OPTICS LETTERS (OPTICAL SOC AMER)

ISSN: 0146-9592

Excited-state absorption cross-section of C60

Tang, Nansheng; Guan, H.; Partanen, Jouni P.; Hellwarth, Robert W.

1994 in SPIE CONFERENCE PROCEEDINGS (Spie-int Soc Optical Engineering)

ISSN: 0277-786X

Phase-sweep method for characterization of cw-laser-induced dielectric gratings

Xia, Ping; Partanen, J. P.

1994 in OPTICS LETTERS (OPTICAL SOC AMER)

ISSN: 0146-9592

Simple transient solutions for photoconduction and the space-charge field in a photorefractive material with shallow traps

Nouchi, P.; Partanen, J. P.; Hellwarth, R. W.

1993 in PHYSICAL REVIEW B (AMER PHYSICAL SOC)

ISSN: 0163-1829

Third-order optical nonlinearity of C60, C70, and CS2 in benzene at 1.06 μm

Tang, N.; Partanen, J. P.; Hellwarth, R. W.; Knize, R. J.

1993 in PHYSICAL REVIEW B (AMER PHYSICAL SOC)

ISSN: 0163-1829

Measurement of the complex polarizability of electron traps in Bi₁₂SiO₂₀ by a moving-grating technique

Xia, Ping; Jonathan, J. M C; Partanen, J. P.; Hellwarth, R. W.

1993 in OPTICS LETTERS (OPTICAL SOC AMER)

ISSN: 0146-9592

Laser preparation of cesium atoms for degenerate four-wave mixing

Knize, R. J.; Jonathan, J. M C; Ai, B.; Glassner, D. S.; Partanen, J. P.

1992 in OPTICS COMMUNICATIONS (Elsevier)

ISSN: 0030-4018

Comment on "Large infrared nonlinear optical response of C60"

Knize, R. J.; Partanen, J. P.

1992 in PHYSICAL REVIEW LETTERS (AMERICAN PHYSICAL SOC)

ISSN: 0031-9007

Temperature dependence of the electron mobility in photorefractive Bi₁₂SiO₂₀

Nouchi, P.; Partanen, J. P.; Hellwarth, R. W.

1992 in JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B: OPTICAL PHYSICS (OPTICAL SOC AMER)

ISSN: 0740-3224

Comparison between holographic and transient-photocurrent measurements of electron mobility in photorefractive Bi12SiO20

Partanen, J. P.; Nouchi, P.; Jonathan, J. M C; Hellwarth, R. W.

1991 in PHYSICAL REVIEW B (AMER PHYSICAL SOC)

ISSN: 0163-1829

Direct determination of electron mobility in photorefractive Bi ₁₂SiO₂₀ by a holographic time-of-flight technique

Partanen, J. P.; Jonathan, J. M C; Hellwarth, R. W.

1990 in APPLIED PHYSICS LETTERS (AMERICAN INSTITUTE OF PHYSICS)

ISSN: 0003-6951

Forced Raman scattering in air by a two-frequency laser beam

Dangor, A. E.; Dymoke-Bradshaw, A. K L; Dyson, A.; Garvey, T.; Karttunen, S. J.; Partanen, J. P.; Salomaa, R. R. E.; Cole, A. J.; Danson, C.; Edwards, C. B.; Evans, R. G.

1989 in JOURNAL OF PHYSICS B: ATOMIC MOLECULAR AND OPTICAL PHYSICS (IOP Publishing Ltd.)

ISSN: 0953-4075

Synchrotron section topographic study of defects in InP substrates and quaternary laser structures

Tuomi, T.; Lipsanen, H.; Ranta-aho, T.; Partanen, J.; Lahtinen, J. A.; Monberg, E.; Logan, R. A.

1989 in Journal of crystal growth (Elsevier)

ISSN: 0022-0248

Threshold measurements of stimulated Raman scattering in gases using picosecond KrF laser pulses

Everall, N. J.; Partanen, J. P.; Barr, J. R M; Shaw, M. J.

1987 in OPTICS COMMUNICATIONS (Elsevier)

ISSN: 0030-4018

A single-mode KrF laser

Partanen, J. P.; Shaw, M. J.

1987 in APPLIED PHYSICS B-LASERS AND OPTICS (Springer Verlag)

ISSN: 0946-2171

Significance of contaminated food in collective dose after a severe reactor accident

Partanen, J. P.; Savolainen, I.

1986 in HEALTH PHYSICS (Lippincott Williams and Wilkins)

ISSN: 0017-9078

MULTIPASS GRATING INTERFEROMETER APPLIED TO LINE NARROWING IN EXCIMER LASERS

Partanen, Jouni

1986 in APPLIED OPTICS (OPTICAL SOC AMER)

ISSN: 0003-6935

HIGH-POWER FORWARD RAMAN AMPLIFIERS EMPLOYING LOW-PRESSURE GASES IN LIGHT GUIDES .1. THEORY AND APPLICATIONS

Partanen, Jouni; Shaw, M. J.

1986 in JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B: OPTICAL PHYSICS (OPTICAL SOC AMER)

ISSN: 0740-3224

HIGH-POWER FORWARD RAMAN AMPLIFIERS EMPLOYING LOW-PRESSURE GASES IN LIGHT GUIDES .2. EXPERIMENTS

Shaw, M. J.; Partanen, Jouni; Owadano, Y.; Ross, I. N. ; Hodgson, E.; Edwards, C. B.; ONeill, F.

1986 in JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B: OPTICAL PHYSICS (OPTICAL SOC AMER)

ISSN: 0740-3224

X-RAY EMISSION FROM KrF LASER-PRODUCED Al PLASMAS.

Matsumoto, Y.; Shaw, M. J.; O'Neill, F.; Partanen, J. P.; Key, M. H.; Eason, R.; Ross, I. N.; Hodgson, E. M.; Sakagami, Y.

1985 in APPLIED PHYSICS LETTERS (AMERICAN INSTITUTE OF PHYSICS)

ISSN: 0003-6951

Radiation doses due to long-range transport of airborne radionuclides released by a reactor accident-effects of changing dispersion conditions during transport

Nordlund, G.; Partanen, J. P.; Rossi, J.; Savolainen, I.; Valkama, I.

1985 in HEALTH PHYSICS (Lippincott Williams and Wilkins)

ISSN: 0017-9078

Book section, Chapters in research books

The integrations of biomaterials and rapid prototyping techniques for intelligent manufacturing of complex organs

Wang, Xiaohong; Tuomi, Jukka; Mäkitie, Antti; Paloheimo, Kaija-Stiina; Partanen, Jouni; Yliperttula, Marjo

2013

Conference proceedings

Additive Manufacturing in Finland: Recommendations for a Renewed Innovation Policy

Flores Ituarte, Inigo; Salmi, Mika; Ballardini, Rosa Maria; Tuomi, Jukka; Partanen, Jouni

2017 in Physics Procedia (Elsevier)

ISSN: 1875-3892

Crossing over Boundaries through Experimental Pedagogy

Salolainen, Maarit; Partanen, Jouni; Moslemian, Oldouz; Suorlahti, Eeva; Kiviluoma, Panu; Niinimäki, Kirsi

2017

ISBN: 9788793416154

3D printing and applications Academic research through case studies in Finland

Flores Ituarte, Inigo; Huotilainen, Eero; Mohite, Ashish; Chekurov, Sergei; Salmi, Mika; Helle, Jukka; Wang, Meng; Kukko, Kirsi; Björkstrand, Roy; Tuomi, Jukka; Partanen, Jouni

2016

ISBN: 9781904670803

How 3D Printing Supports Business Development in Contract Manufacturing

Polvinen, Kirsi; Pihlajamaa, Jussi; Viitamo, Esa; Berg, Pekka; Partanen, Jouni

2015

ISBN: 978-90-77360-18-7

Adaptive Selective Laser Sintering Testing Device for Process Research in 3d Printing

Pomell, Janne; Silvonen, Atte; Lagus, Niko; Kim, Hyunsoo; Partanen, Jouni; Kiviluoma, Panu; Kuosmanen, Petri

2015

ISBN: 978-9949-23-804-0

ISSN: 2346-612X

The Effect of Filters on the Accuracy of Stereolithography

Syvänen, Janne; Karlén, Niko; Salminen, Pontus; Kivekäs, Klaus; Kiviluoma, Panu; Kuosmanen, Petri; Partanen, Jouni

2015

ISBN: 978-9949-23-804-0

ISSN: 2346-612X

How do customer and user understanding, the use of prototypes and distributed collaboration support rapid innovation activities

Kanto, Laura; Alahuhta, Pekka; Kukko, Kirsi; Pihlajamaa, Jussi; Partanen, Jouni; Vartiainen, Matti; Berg, Pekka

2014 in Portland International Conference on Management of Engineering and Technology (Tallinn University of Technology)

ISBN: 978-1-890843-29-8

ISSN: 2159-5100

The Effects of Minituarisation of Projection Stereolithography Equipment on Printing Quality

Rayat, H.; Pulkkinen, V.; Johansson, M.; Nyfors, V.; Partanen, J.; Kiviluoma, P.; Kuosmanen, P.

2014

Additive Manufacturing with UV Light Cured Resin

Vuorio, J.; Nikkilä, V.; Teivastenaho, V.; Peltola, J.; Partanen, J.; Kiviluoma, P.; Kuosmanen, P.

2014

Fabrication of Conformal Ultrasound Transducer Arrays and Horns Based on Multi-Axis CNC Accumulation

Yayue, Pan; Chi, Zhou; Yong, Chen; Partanen, Jouni P.

2011

ISBN: 978-0-7918-4430-4

Toolless Layer-Wise Production Methods: Adaptable and Fast Way to Customer

Partanen, J.P.; Tuomi, J.; Vihtonen, L.

2010

ISBN: 978-3-901509-73-5

ISSN: 1726-9679

Bearing damage detection based on statistical discrimination of stator current

Lindh, T.; Ahola, J.; Kamarainen, Joni-Kristian; Kyrki, V.; Partanen, J.

2003

ISBN: 0780378385

Enhanced resolution of stereolithography

Partanen, Jouni P.

1997 in SPIE Proceedings (SPIE)

ISBN: 0-8194-2312-2

Solid state lasers for stereolithography

Partanen, JP

1996 in LASER INSTITUTE OF AMERICA - PROCEEDINGS (LASER INST AMERICA)

ISBN: 0-912035-54-4

Lasers and optics in stereolithography

Partanen, Jouni P.

1996 in SPIE Proceedings (SPIE)

ISBN: 0-8194-2077-8

Solid state lasers for stereolithography

Partanen, JP

1996 in SOLID FREEFORM FABRICATION PROCEEDINGS (SERIES) (UNIV TEXAS AUSTIN)

ISSN: 1053-2153

Fabrication of parts containing small features using stereolithography

Partanen, JP

1996 in SOLID FREEFORM FABRICATION PROCEEDINGS (SERIES) (University of Texas)

ISSN: 1053-2153

STUDIES OF OPTICAL NONLINEARITY IN BIS-THIENYL POLYENES

Tang, Nansheng; Partanen, Jouni; Hellwarth, Robert W. ; Laquindanum , J-; Dalton , Larry R.; He, Mingqian ; Spangler , Charles W.

1994 in PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE) (SPIE)

ISBN: 0-8194-1609-6

Non-refereed scientific articles

Unrefereed conference proceedings

Microstereolithography and Tissue Engineering

Partanen, Jouni P.; Laurila, Santeri; Lehtinen, Pekka; Kaivola, Matti; Kajava, Timo; Korhonen, Harri; Seppälä, Jukka

2011

Publications intended for professional communities

Published development or research report

Materiaalia lisäävän valmistuksen (3D-tulostus) kaasu- ja hiukkaspäästöt eri työvaiheissa TSR LOPPURAPORTTI NUMEROT 114374, 114406, 114337

Viitanen, Anna-Kaisa ; Kangas, Anneli; Huhtiniemi, Marika; Kanerva, Tomi; Stockmann-Juvala, Helene; Säämänen, Arto; Kukko, Kirsi; Tuomi, Jukka; Partanen, Jouni; Kallonen, Kimmo; Hämeri, Kaarle

2016

ISBN: 978-952-261-671-5

3D Printing or Additive Manufacturing (AM) in the industrial context: promoting competitiveness 3D Printing for Industrial Innovation

Flores Ituarte, Inigo; Salmi, Mika; Partanen, Jouni; Tuomi, Jukka

2015

Tekes projekti SuperMachines loppuraportti

Salmi, Mika; Partanen, Jouni; Tuomi, Jukka; Chekurov, Sergei; Flores, Iñigo; Björkstrand, Roy; Lehtinen, Pekka

2015